In Sultan's ROM or any other Cyanogenmod 13 based ROMs, by default AudioFx is installed. Is it possible to to remove it and make Viper4Android as the default application?
I am using XOSP ROM. It has Viper4Android. It used to be a very stable ROM. I want to move to Sultan' ROM.
So can anybody provide me the steps? I also need the download link for Viper4Android application. Has anybody ever tried before?
I'm using Sultan's ROM and I have Viper4Android working flawlessly using the script in this thread http://forum.xda-developers.com/android/general/viper4android-universal-fix-cm13-t3337289
i'm on latest Sultan's rom and use Viper, all fine. you have to:
1) install BusyBox (grab stericson's installer from playstore or flash this
2) flash "MusicFX Installer and AudioFX Remover.zip" from here it's the last attached file on OP
3) flash ViperAudio zip, choose the version you prefer from previous link. i personally use clean Viper|Audio 6.1, there's a flashable zip attached here.
some people say SELinux has to be set on "Permissive" but i have it on stock "Enforcing" mode and Viper works fine. Maybe it's needed just for first install, don't remember exactly but make your tests and see what one works better for you.
etoy said:
i'm on latest Sultan's rom and use Viper, all fine. you have to:
1) install BusyBox (grab stericson's installer from playstore or flash this
2) flash "MusicFX Installer and AudioFX Remover.zip" from here it's the last attached file on OP
3) flash ViperAudio zip, choose the version you prefer from previous link. i personally use clean Viper|Audio 6.1, there's a flashable zip attached here.
some people say SELinux has to be set on "Permissive" but i have it on stock "Enforcing" mode and Viper works fine. Maybe it's needed just for first install, don't remember exactly but make your tests and see what one works better for you.
Click to expand...
Click to collapse
You did feel any difference in phone speaker? For headphones, i can feel it
Tiongkia said:
You did feel any difference in phone speaker? For headphones, i can feel it
Click to expand...
Click to collapse
yeah, works on phone speaker too, just enable it in "phone speaker" tab from the Viper app
etoy said:
yeah, works on phone speaker too, just enable it in "phone speaker" tab from the Viper app
Click to expand...
Click to collapse
I know. I was asking whether u felt any difference on phone speaker. To me not much
For earphones, yes, i felt it
Tiongkia said:
I know. I was asking whether u felt any difference on phone speaker. To me not much
For earphones, yes, i felt it
Click to expand...
Click to collapse
there's difference, you can hear it actually works but the speaker itself isn't nothing impressive so a simple DSP won't do miracles
etoy said:
there's difference, you can hear it actually works but the speaker itself isn't nothing impressive so a simple DSP won't do miracles
Click to expand...
Click to collapse
Ok noted. Lol
Thanks dude.
Yes, I did notice change in phone speaker. Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
iamsonal said:
In Sultan's ROM or any other Cyanogenmod 13 based ROMs, by default AudioFx is installed. Is it possible to to remove it and make Viper4Android as the default application?
I am using XOSP ROM. It has Viper4Android. It used to be a very stable ROM. I want to move to Sultan' ROM.
So can anybody provide me the steps? I also need the download link for Viper4Android application. Has anybody ever tried before?
Click to expand...
Click to collapse
Install Link2SD app, remove MusicFX and convert ViPER to System app. Voila!
@zaaed @iamsonal @etoy
Do you have issues loading irs?
I cannot copy files to the emulated, legacy, viper directory. Any fix?
Thanks in advance.
---------- Post added at 10:27 PM ---------- Previous post was at 10:27 PM ----------
[/COLOR @zaaed
@iamsonal
@etoy
Do you have issues loading irs?
I cannot copy files to the emulated, legacy, viper directory. Any fix?
Thanks in advance.
Tiongkia said:
@zaaed @iamsonal @etoy
Do you have issues loading irs?
I cannot copy files to the emulated, legacy, viper directory. Any fix?
Thanks in advance.
---------- Post added at 10:27 PM ---------- Previous post was at 10:27 PM ----------
[/COLOR @zaaed
@iamsonal
@etoy
Do you have issues loading irs?
I cannot copy files to the emulated, legacy, viper directory. Any fix?
Thanks in advance.
Click to expand...
Click to collapse
No issues, however there's some work around. Irs should be loaded under 0/legacy/ViPER/Kernel and this particular folder shows up when I browse through ES xplorer, while on Legacy turn ON show hidden folder then tap on legacy to see this folder.
EDIT: Seriously, I don't get this **** folder very quickly, I have to try atleast ten times with above trick to access this. Later I created a shortcut folder on the home page.
EDIT 2: Somewhere on the web saw this route for that folder /data/media/legacy/ViPER4Android/Profile. I don't have device right now to check, you can check this path as well.
zaaed said:
No issues, however there's some work around. Irs should be loaded under 0/legacy/ViPER/Kernel and this particular folder shows up when I browse through ES xplorer, while on Legacy turn ON show hidden folder then tap on legacy to see this folder.
EDIT: Seriously, I don't get this **** folder very quickly, I have to try atleast ten times with above trick to access this. Later I created a shortcut folder on the home page.
EDIT 2: Somewhere on the web saw this route for that folder /data/media/legacy/ViPER4Android/Profile. I don't have device right now to check, you can check this path as well.
Click to expand...
Click to collapse
Profiles and irs are at data/media/legacy/ViPER4Android/.
Profiles load and save on data/media/legacy/ViPER4Android/
But irs load from see screenshot. I cannot copy irs there.
Tiongkia said:
Profiles and irs are at data/media/legacy/ViPER4Android/.
Profiles load and save on data/media/legacy/ViPER4Android/
But irs load from see screenshot. I cannot copy irs there.
Click to expand...
Click to collapse
Is it the only folder showing under legacy? For me when I go to that path under legacy only viper folder is available, you might need to enable show hidden folder optiom to see it.
---------- Post added at 04:33 AM ---------- Previous post was at 04:27 AM ----------
Are you on marshmallow or Lollipop?
zaaed said:
Is it the only folder showing under legacy? For me when I go to that path under legacy only viper folder is available, you might need to enable show hidden folder optiom to see it.
---------- Post added at 04:33 AM ---------- Previous post was at 04:27 AM ----------
Are you on marshmallow or Lollipop?
Click to expand...
Click to collapse
Only folder. Es explorer cannot see. So i used root explorer.
I am on sultan cm13. Its mashmallow.
Tiongkia said:
Only folder. Es explorer cannot see. So i used root explorer.
I am on sultan cm13. Its mashmallow.
Click to expand...
Click to collapse
I used es explorer, grant root you should be able to see it. If not try to create a folder in root directory of sd with name ViPER4Android/Kernel and place irs, may be it should work
Related
Note: This mod is only working on scrubbers lollipop port.
I've always preferred an 0.75 animation scale. 1.0 is too slow and 0.5 is to fast.
If you like it too just follow these instructions:
- Flash attached zip in recovery
- Reboot and head in to settings. In About phone tap the build number 5 times to enable developer options.
- In developer options scroll down to the 3 types of animation scale.
- Now you should have a 0.75 option. Set this and let your device fly.
Status: Beta 1
Uploaded: 2014-12-08
I'm just saying I turn them all off to 0 and makes everything much faster.
Actually turning them all of might give you issues. Animations are not solely there for the eye pleasure. And everything is not "much faster" compared to 0.75.
0.75 suits me best. And IMHO the lollipop animations aren't that bad
pemell said:
Actually turning them all of might give you issues. Animations are not solely there for the eye pleasure. And everything is not "much faster" compared to 0.75.
0.75 suits me best. And IMHO the lollipop animations aren't that bad
Click to expand...
Click to collapse
I flashed it but there isn't any .75x option. Are you sure the option for .75x becomes available after flashing?
jnx_r said:
I flashed it but there isn't any .75x option. Are you sure the option for .75x becomes available after flashing?
Click to expand...
Click to collapse
Yes I'm sure.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
pemell said:
Yes I'm sure.
Click to expand...
Click to collapse
I tried flashing it via TWRP and CWM and neither resulted in any new .75x option. Is there anything I'm missing mate?
I also tried clearing the dalvik cache. Nothing seems to work for me.
jnx_r said:
I tried flashing it via TWRP and CWM and neither resulted in any new .75x option. Is there anything I'm missing mate?
I also tried clearing the dalvik cache. Nothing seems to work for me.
Click to expand...
Click to collapse
Which file are you trying to flash?
pemell said:
Which file are you trying to flash?
Click to expand...
Click to collapse
The first one which says "add_0_75_animation_scale_beta1.zip".
jnx_r said:
I flashed it but there isn't any .75x option. Are you sure the option for .75x becomes available after flashing?
Click to expand...
Click to collapse
I too flashed this mod last night and there was no .75x option...
kanej2006 said:
I too flashed this mod last night and there was no .75x option...
Click to expand...
Click to collapse
It seems I'm not the only one who isn't able to enable this mod.
--
I'm not sure which of my actions screwed up this mod.
I had already enabled developer options so I skipped step #2.
I had also flashed the navbar mod before flashing this one.
---
Other things I may have done to break this mod include following this guide to get viper working:
SÜPERUSER said:
Well here's what I did
Download this app https://play.google.com/store/apps/details?id=com.mrbimc.selinux and change to Permissive
Download the viper zip here forum.xda-developers.com/attachment.php?attachmentid=3018995&d=1416178083
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Source thread: http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
Uninstall any old viper .apk.
Reboot to recovery and flash .zip file you downloaded
I followed this guide: Read below.
Click to expand...
Click to collapse
shubhamgulati91 said:
Tested and working perfectly on Nexus 5 Lollipop built number LRX21O.
1. Root using CF-Autoroot.
2. Change to permissive mode using SELinux Mode Changer.
3. Enable developer options -> Uncheck Use NuPlayer (experimental).
4. Flash the zip below from recovery and wait for cache to be rebuilt.
5. BOOM! Enjoy your music flawlessly.
Credits: zhuhang, Droidyou.
Click to expand...
Click to collapse
^ Thank you so much jnx_r, I'll give it a try later on after work.
mount system before flashing? i flashed via TWRP with system mounted and it work as it should
kanej2006 said:
^ Thank you so much jnx_r, I'll give it a try later on after work.
Click to expand...
Click to collapse
Mate, I've yet to get it working.
I just listed the things which could have broken the mod.
-
You can try Viper4Android though, its like DSP which comes with Cyanogen but it has more options.
---------- Post added at 06:07 AM ---------- Previous post was at 05:48 AM ----------
destinygs said:
mount system before flashing? i flashed via TWRP with system mounted and it work as it should
Click to expand...
Click to collapse
Yes, I tried it right now, in CWM and TWRP. Not working again on both. Anyways, the zip's script is supposed to mount system automatically. I'm not sure what is causing it to not work when its working on some devices.
And yes, I am on Scrubber's Lolipop port right now.
I've got no idea why it's not working for you... :/
Cam you try to push the settings apk manually and see if that helps.
Oh wait @jnx_r try set selinux back to enforcing.
pemell said:
I've got no idea why it's not working for you... :/
Cam you try to push the settings apk manually and see if that helps.
Click to expand...
Click to collapse
pemell said:
Oh wait @jnx_r try set selinux back to enforcing.
Click to expand...
Click to collapse
I tried resetting Selinux but it didn't work, I reflashed it over, and still stuck where I was.
-
Can you give me some instructions to get it done manually?
jnx_r said:
You can try Viper4Android though, its like DSP which comes with Cyanogen but it has more options.
Click to expand...
Click to collapse
I just installed and ran Viper4Android, the very one you sent the link to. I have some questions. After launching Viper4Android, how can I tell if it's working or not? Secondly, what settings do you recommend I set in the program?
Thanks.
kanej2006 said:
I just installed and ran Viper4Android, the very one you sent the link to. I have some questions. After launching Viper4Android, how can I tell if it's working or not? Secondly, what settings do you recommend I set in the program?
Thanks.
Click to expand...
Click to collapse
Well, I haven't tried out every setting yet to come up with my own preferences yet. But yes I can confirm that its working as advertised.
Just play any audio track and while its playing, change the settings in V4A and see the difference. If you're unable to notice anything, try the extreme setting, or increase the decibels in the optional effects you prefer.
If you still can't notice any difference, then its about time you changed your headset, I'm using $450 IEMs. From my short time with V4A, I found it to be more versatile than DSP with more flexibility.
Now about what you were asking, I'm currently using AGC gain at moderate level. Extreme makes things really loud. Anyways, I'm happy that it fixes one of the main complaints about Sony phones'. ie. low audio levels.
Equalizer is disabled at this point, but I may tinker with it as I change tracks. Bass level boost & Clarity[makes audio crisper by amplifying high freqs a bit] are left untouched too as my IEMs can produce bass pretty well, and enabling those options will simply be overkill. But I do imagine using those options when I am listening on something which doesn't couple with my ear canals perfectly.
Virtual Surround is also left disabled, along with Binaural levels but I may enable Virtual Surround, during movies or extended listening to counter listening fatigue.
-
Go through the OP for V4A once for details regarding the settings and you should be set:
http://forum.xda-developers.com/showthread.php?t=2191223
PS: I'm using it with Walkman app from here:
http://forum.xda-developers.com/showthread.php?t=2728110
It works flawlessly, along with other Sony media apps. xLoud and other proprietary Sony Audio technologies like Clear Stereo and Clear Phase are working too.
^ Thank you so much jnx_r for for your help, much appreciated.
I will play around with the settings until I'm satisfied with the results!
Please people don't discuss viper in this thread.
@jnx_r push Settings.apk found in the flashable zip to /system/priv-app/Settings and set permissions to 644.
The flashable zip should definitely work though. We are on the same system, uses the same recovery (I use CWM).
Flash it again and show me a screenshot of the windows animation scale options please.
THREAD INDEX:
I. INTRODUCTION
II. REQUIREMENTS
III. INSTALLATION GUIDE (THROUGH RECOVERY)
IV. BOOTANIMATION.ZIP INSTALLATION GUIDE
Second Post. DOWNLOADS
#_____________________________#
I. Introduction
As you know Samsung Stock Roms uses a special .qmg for the bootanimation but the procedure that converts all the bootanimation.zip to .qmg ones doesn't give good results getting a low quality bootanimation.
Android uses a binary called bootanimation to run the bootanimations, and it is situated inside the system/bin folder, Samsung has modified this binary in order to get it working with .qmg files.
-Why don't we restore the native bootanimation.zip support?
II. Requirements
This mod has been tested on many samsung devicesl!
These are all the requirements required to add the spport for the Native Android Bootanimations:
Samsung device
Rooted Smartphone
Recovery Installed (TWRP or CWM)
II. Installation guide (THROUGH RECOVERY)
The installation procedure is really easy because i've made a simple zip that makes everything accessible!
Perfrom the following steps:
Download the proper zip according to your android version from the second post
Reboot your smartphone to the recovery and install the downloaded zip
Now you have the Native Android bootanimation.zip support
Now, once you reboot your smartphone, you will see the stock Android Bootanimation.
Did you get a softbrick?
-My zip automatically creates a zip that allows to restore the previous bootanimation binary. Reboot to recovery and install the StockBootanimationRestorer.zip inside the /vr-theme folder and report your device, please
III. Bootanimation.zip installation guide
Now as you have the bootanimation.zip support you have to look for a bootanimation style repository, and inside XDA i've found this useful thread:
[BootAnimation & Shutdownanimation] MASSIVE G3 Collection <<Over 66+>> 10/9/14 -> (Thanks @KachowPow)
Easy procedure to install bootanimations.zip :
Download the style you like from the thread posted above or alternative sources
Download the Flashable_Bootanimation.zip schema and extract it
Open the /system/media folder and put the bootanimation.zip that you have downloaded (Do not extract the animation.zip)
Compress all the folders (META-INF & /system) in zip without any compression or other options
Copy the compressed zip inside your phone memory and begin with the installation procedure via Recovery
Reboot and ENJOY!
:good: I HOPE YOU'VE LIKED MY THREAD, IF SO HIT THE THANKS BUTTON :good:
-
2nd Post. Download links
-XDA Attachements:
Farewell QMG!!!
Top work Giuseppe....... I'm teaching you well ??
Howdy Giu[emoji12] nice work. Bootloops will be fun from now on.
Sent from my SM-G925F
Any photos here please. I seem not sure of what exactly to expect.
dmokiring said:
Any photos here please. I seem not sure of what exactly to expect.
Click to expand...
Click to collapse
On your Note 4 by default you have the bootanimation with Fireworks, and if you wanna install custom bootanimations you have to create them (in .qmg) losing a lot of quality. With this guide now you can install all the bootanimations you want.
Follow the guide and then choose the bootanimation you like from here Bootanimations 1440 x 2560 repository by KachowPow @ XDA
Examples downloadable on the thread posted above:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Work like a charm!! Thx man!
Bart3n said:
Work like a charm!! Thx man!
Click to expand...
Click to collapse
You are welcome!
Could you mention your device model, please ?
CoolJoseph96 said:
You are welcome!
Could you mention your device model, please ?
Click to expand...
Click to collapse
Oh sorry, mine is N910F.. love the quality of the animation!!!
Bart3n said:
Oh sorry, mine is N910F.. love the quality of the animation!!!
Click to expand...
Click to collapse
Thanks!
:good: I HOPE YOU'VE LIKED MY THREAD, IF SO HIT THE THANKS BUTTON :good:
Click to expand...
Click to collapse
Took a chance with my T700 - works quite well. Sometimes have to boot twice (hard reset). But thanks.
THREAD UPDATED - ALMOST ALL SAMSUNG DEVICES SUPPORT AND ANDROID OS
Well, lately users do not read long threads! :')
Anyway i made an update on the topic adding the support for almost all samsung devices and android os.
Lemme know your device model if it has worked or not!
After flashing the zip for KitKat on my g355h, the splash screen was shown up (as always) but it continued up until the home screen.....no boot animation. Also there is a pre-installed bootanimation.zip in /system/media/here, that came with the stock firmware......
Hey, does this support Galaxy J5? Also, nice work dude, i really appreciate your work.
EDIT:
It works for Galaxy J5. just installed a cyanogenmod bootanimation, works fine. Thanks Jertlok for this amazing mod!
Jertlok said:
2nd Post. Download links
-XDA Attachements:
Click to expand...
Click to collapse
Thanks a lot. It works nice. But when I create an boot animation it would not work. But all downloaded zip boot animation works fine on my Samsung Galaxy core Prime g360h. Can You explain where I am doing error during creating a zip boot animation. Here the attached file
---------- Post added at 11:35 AM ---------- Previous post was at 11:33 AM ----------
I can not attach file
---------- Post added at 11:41 AM ---------- Previous post was at 11:35 AM ----------
Here the link. All are correct but it it would not work on my phone. Although all downloaded zip boot animation works charm
https://drive.google.com/file/d/0B3-NCstEO255RmNISXZwa1ducFk/view?usp=docslist_api
Downloaded bootanimation.zip, placed it into media, made a zip, copied it over to my phone and if i wanna flash it say, that it can not find update binary in the meta inf folder; i looked it up in the folder and it was there, seemed to be broken, and before all this i installed the mm native bootanimation supprt(per given zip)
any suggestions?
---------- Post added at 05:35 PM ---------- Previous post was at 05:34 PM ----------
Bogimaster said:
Downloaded bootanimation.zip, placed it into media, made a zip, copied it over to my phone and if i wanna flash it say, that it can not find update binary in the meta inf folder; i looked it up in the folder and it was there, seemed to be broken, and before all this i installed the mm native bootanimation supprt(per given zip)
any suggestions?
Click to expand...
Click to collapse
when i tried it with the MM flasshable zip(for example), it worked
---------- Post added at 06:16 PM ---------- Previous post was at 05:35 PM ----------
i got it work by replacing the files in system/media, its okay
secondly, is there a way to change the boot splash screen and/or the shutdownanimation??
probably this only works on aosp roms...
I have a Note 3 with a Note 7 port, so I flashed the MM zip.
Does not work unfortunately, stays in the initial Samsung Galaxy Note 3 screen and jumps straight to lock screen (it skips boot animation entirely)
I dunno if I should blame this on the bootanimation itself or that I am using a custom ROM
Any suggestions?
Does this work on stock firmware with root and custom recovery?
Works perfectly on Note3neo (sm-n7505), is there any way to also change the shutdown animation ?
TheCharlie17 said:
Works perfectly on Note3neo (sm-n7505), is there any way to also change the shutdown animation ?
Click to expand...
Click to collapse
+1
Solution is in end of first page
We can install sdk22 v80 for 64 bit in our device
It works very well
But one problem that camera force stop everytime
If we uninstall it then camera works perfectly
Plz help someone how to make camera work for our device with xposed installed
sumitkhkh said:
We can install sdk22 v80 for 64 bit in our device
It works very well
But one problem that camera force stop everytime
If we uninstall it then camera works perfectly
Plz help someone how to make camera work for our device with xposed installed
Click to expand...
Click to collapse
Use another app for camera??
Enviado desde mi D6653 mediante Tapatalk
no camera is best than sony
To fix the camera issue for me it worked to use this method:
http://forum.xda-developers.com/crossdevice-dev/sony/z4-z5-z5c-fix-camera-fc-installing-t3246962
So, give it a try...
can you plz upload deodexed folders
oenke said:
To fix the camera issue for me it worked to use this method:
http://forum.xda-developers.com/crossdevice-dev/sony/z4-z5-z5c-fix-camera-fc-installing-t3246962
So, give it a try...
Click to expand...
Click to collapse
Works very well on E5563, thanks.
I'm having this when trying to deodex the camera app: Boot.oat Extraction Failed
Does anyone know how to solve it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PnPZik said:
I'm having this when trying to deodex the camera app: Boot.oat Extraction Failed
Does anyone know how to solve it
Click to expand...
Click to collapse
You could try to update to a newer Java version. As I see in the image you use Java 6. Maybe it depands on that.
In that threat, post #2 it is said:
Works with both Java 7 and 8
Click to expand...
Click to collapse
.
oenke said:
You could try to update to a newer Java version. As I see in the image you use Java 6. Maybe it depands on that.
In that threat, post #2 it is said: .
Click to expand...
Click to collapse
I've update my Java to version 8 but somehow it's still 6 in the sofware. I have to fully uninstall all version of Java on my computer and reinstall the 7 version and now it works.
Thanks !
problem Solved
Copy the files-.apk to their folder using your filemanager app
and /system/priv-app/CameraCommon/CameraCommon.apk
You must have system-partition with read/write/delete access.
Dont forget do change file privilege chmod with the Root explorer touch-interface to permission-mode "644"
Link
http://forum.xda-developers.com/attachment.php?attachmentid=3619981&d=1453581171
Enjoying Phone Now
i want to install xposed on my c5 ultra dual(E5563) lollipop 5.0 . i already download files. but i don't know how to install cwm or twrp recovery on my phone.
waiyanwin said:
i want to install xposed on my c5 ultra dual(E5563) lollipop 5.0 . i already download files. but i don't know how to install cwm or twrp recovery on my phone.
Click to expand...
Click to collapse
Okay, so you have two files, the .apk file for the Xposed Installer app and the .zip, which you need to flash for it to work.
It is now super easy to flash it using TWRP, which is a custom recovery now available for C4/5 thanks to @bigrammy (I'm very thankful for the hard work and detailed instructions!):
forum.xda-developers.com/xperia-c5-ultra/development/bootloader-unlocked-custom-recovery-t3285521
Read everything carefully. I was able to get TWRP and SuperSU then easily flashed the Xposed Framework .zip via TWRP.
According to the second post in the thread I linked to above, it's confirmed to be working on Firmware Version 5.0.2 and 5.1.1 for the C5 Single, Dual, and World Wide for all Variants with Boot Loader 0.5, so the method may work for your phone.
---------- Post added at 11:13 PM ---------- Previous post was at 11:04 PM ----------
sumitkhkh said:
Solution is in end of first page
We can install sdk22 v80 for 64 bit in our device
It works very well
But one problem that camera force stop everytime
If we uninstall it then camera works perfectly
Plz help someone how to make camera work for our device with xposed installed
Click to expand...
Click to collapse
I'm sorry if this is an OT post, but I can't seem to find a dedicated place for the C4, and the C4 and C5 seem so close in terms of specs (other than the screen size, for example) that they're often used interchangeably in this forum, so I wanted to post about my own experience with the Xperia C4 (E5303). I want to confirm that I was also able to get the Xposed Framework working, gave it root privileges via SuperSU, and even installed a module. It seems to be working fine so far.
However, I also ran into the problem of the camera and album FC. Since none of the files linked to here are for my device and I'm afraid that using them might have an adverse affect because they're only compatible with the C5 Ultra, I'm going to try the Deodexer and report back here to let you know what happens.
boot.oat not found . and i keep getting annoying errors...
gsser said:
boot.oat not found . and i keep getting annoying errors...
Click to expand...
Click to collapse
Could you please provide more details about this error? What were you doing?
I think I got a similar error when using LBD2.5, but I know why. I tried to deodex my system folder, and it failed to deodex the CameraCommon app because I didn't delete the "arm" folder in CameraCommon. I delete it then received the error you mentioned above probably because everything but CameraCommon had already been deodexed. What I did to resolve it was copying the respective files from my device to my pc once more then trying again, and it was successful, so it's worth a try.
Okay, I can't seem to figure this out... I was able to download LBD2.5, and it worked fine when deodexing CameraCommon.apk with no errors after I followed all the instructions in the first post (only leaving arm64 in the CameraCommon directory), but after a reboot it still didn't work. My album seems to be working fine now, though, and I'm not sure why that is.
I tried leaving just arm in the directory and then tried neither arm64 nor arm, but they both failed to even doedex completely. Nothing seems to be working for me. I'm able to do everything in the first post, but the camera never works.
I even downloaded the file attached, although it's not for my Xperia C4 (E5303), and that didn't work either. I'm going to try a free camera app for the time being until I can figure this out. If anyone has any suggestions, please let me know.
xperia_c4_hater said:
Could you please provide more details about this error? What were you doing?
I think I got a similar error when using LBD2.5, but I know why. I tried to deodex my system folder, and it failed to deodex the CameraCommon app because I didn't delete the "arm" folder in CameraCommon. I delete it then received the error you mentioned above probably because everything but CameraCommon had already been deodexed. What I did to resolve it was copying the respective files from my device to my pc once more then trying again, and it was successful, so it's worth a try.
Click to expand...
Click to collapse
i just took a deodexed camera apk and gave the right permissions then did a reboot now its working
gsser said:
i just took a deodexed camera apk and gave the right permissions then did a reboot now its working
Click to expand...
Click to collapse
I'm happy for you! :good: However, mine still isn't working, even when I just tried again by downloading an already deodexed apk and giving it the right permissions.
xperia_c4_hater said:
I'm happy for you! :good: However, mine still isn't working, even when I just tried again by downloading an already deodexed apk and giving it the right permissions.
Click to expand...
Click to collapse
I had the same problem with my C5 Ultra Dual E5563. I've tried both downloaded deodexed file on xda and deodexed the file myself but none of them work, of course I've set chmod 644 for the file.
I did it like that: gave root permission to es file manager, deleted cameracommon.apk under system priv app. then reboot and again placed the deodexed apk to priv app and changed name to cameracommon. then gave the permissions 0644 and again did a reboot then it got fixed. hopefully it helps you
gsser said:
I did it like that: gave root permission to es file manager, deleted cameracommon.apk under system priv app. then reboot and again placed the deodexed apk to priv app and changed name to cameracommon. then gave the permissions 0644 and again did a reboot then it got fixed. hopefully it helps you
Click to expand...
Click to collapse
Thanks for explaining what you did in detail!
I just tried it now, but it still didn't work for me.
So recently I've rooted my galaxy s5 tmobile sm-g900t and install viper4andriod. I have Busybox installed through google play and installed on both my xu and system folder. I also made sure there was enough space. Around 30mb of space. I then installed SeLinuxMode Changer and Universal init.d so that i can force the SeLinixmode changer to stay on permissive. There is a bug where restarting and exiting out the app would reset SeLinux mode you have selected. Now that that SeLinusMode restarts on permissive, i was able to install Viper4Andriod. I then continued and installed the driver, but after installation, i checked to see if anything changed in the sound. Nothing changed so i checked the driver status. It turns out to be Abnormal and unsupported. I'm running 2.3.40, and have also tried the latest version of Viper4Andriod, but both doesn't seem to work. I have stock touchwiz rom and completely disabled and removed Knox. I checked my root with Root Checker, and it passed. But for some reason going into recovery mode, it asks me to install supersu because it was missing. But at the same time, i am running PhilzTouch, which is outdated. I have tried other methods, but it doesn't seem to work. I just need to get pass the driver status problem.
If anyone know the solution to this, I'd very much appreciate it if you help us all out.
Same for me : with 6.0.1 rooted, the driver was unsupported.
What worked for me was to install viper4android from the play store, as the 2.3.4.0 version has better sound (in my own opinion) than the 2.4.0.1 that can be found elsewhere. After installing the driver in high quality, it showed as unsupported.
I had to flash two additional files that you can find here http://forum.xda-developers.com/showpost.php?p=52106530&postcount=609 : Viper4A-[Build.Prop-Tweaks]-CWM.zip and Viper4A-[Soundfix-LibFiles]-CWM.zip. I am no expert, and probably only the second file is required but I flashed both and it just worked.
Also, you don't need a SElinux permissive kernel. You can simply flash the file linked here http://forum.xda-developers.com/showthread.php?p=61242973#post61242973, and it will patch your system. As long as you have supersu installed, you will be able to use viper4android in enforcing.
For full steps, you can also have a look at maximumentropy post here :
maximumentropy said:
...
Install the APK in the standard way (not in priv-app or most convolvers won't work).
Install the highest quality drivers and reboot to recovery
Flash the update here from recovery to allow V4A execution with SELinux Enforcing: http://forum.xda-developers.com/showthread.php?p=61242973#post61242973
Flash the Viper4A-[Soundfix-LibFiles]-CWM.zip from this message (but not the others) to replace the system sound libraries in /system/lib/soundfx with V4A-compatible versions: http://forum.xda-developers.com/showpost.php?p=52106530&postcount=609
Reboot
In Viper settings, use Normal mode, not Compatible.
Enable V4A-FX in the desired profile (it is not necessary to use Force Enable V4A)
...
Click to expand...
Click to collapse
alexbelgium said:
Same for me : with 6.0.1 rooted, the driver was unsupported.
What worked for me was to install viper4android from the play store, as the 2.3.4.0 version has better sound (in my own opinion) than the 2.4.0.1 that can be found elsewhere. After installing the driver in high quality, it showed as unsupported.
I had to flash two additional files that you can find here http://forum.xda-developers.com/showpost.php?p=52106530&postcount=609 : Viper4A-[Build.Prop-Tweaks]-CWM.zip and Viper4A-[Soundfix-LibFiles]-CWM.zip. I am no expert, and probably only the second file is required but I flashed both and it just worked.
Also, you don't need a SElinux permissive kernel. You can simply flash the file linked here http://forum.xda-developers.com/showthread.php?p=61242973#post61242973, and it will patch your system. As long as you have supersu installed, you will be able to use viper4android in enforcing.
For full steps, you can also have a look at maximumentropy post here :
Click to expand...
Click to collapse
It says its only for kitkat rom? Do you knw if it works for gs5 sm-g900t?
Frankie_Xenon said:
It says its only for kitkat rom? Do you knw if it works for gs5 sm-g900t?
Click to expand...
Click to collapse
Well I am sure that it works both for SM-G900F on 5.0 and 6.0.1 roms. The best for you is to make a backup of your system before trying. As it only impacts the system and not the kernel, it should work whether it is g900f or g900t...
alexbelgium said:
Same for me : with 6.0.1 rooted, the driver was unsupported.
What worked for me was to install viper4android from the play store, as the 2.3.4.0 version has better sound (in my own opinion) than the 2.4.0.1 that can be found elsewhere. After installing the driver in high quality, it showed as unsupported.
I had to flash two additional files that you can find here http://forum.xda-developers.com/showpost.php?p=52106530&postcount=609 : Viper4A-[Build.Prop-Tweaks]-CWM.zip and Viper4A-[Soundfix-LibFiles]-CWM.zip. I am no expert, and probably only the second file is required but I flashed both and it just worked.
Also, you don't need a SElinux permissive kernel. You can simply flash the file linked here http://forum.xda-developers.com/showthread.php?p=61242973#post61242973, and it will patch your system. As long as you have supersu installed, you will be able to use viper4android in enforcing.
For full steps, you can also have a look at maximumentropy post here :
Click to expand...
Click to collapse
Do you know if this works for lollipop 5.1.1? It said for kitkat rom?
Frankie_Xenon said:
Do you know if this works for lollipop 5.1.1? It said for kitkat rom?
Click to expand...
Click to collapse
Mmh I answered just above to that question? I tested it both on touchwiz with android 5 (lollipop) and 6 (marshmallow) and it works! It said "only kitkat" because at that time lollipop wasn't out you can see that the original post was dated from early 2014.
alexbelgium said:
Mmh I answered just above to that question? I tested it both on touchwiz with android 5 (lollipop) and 6 (marshmallow) and it works! It said "only kitkat" because at that time lollipop wasn't out you can see that the original post was dated from early 2014.
Click to expand...
Click to collapse
My apologies lol. My phone lagged and i ended up replying twice. Thanks ill give it a shot!
alexbelgium said:
Mmh I answered just above to that question? I tested it both on touchwiz with android 5 (lollipop) and 6 (marshmallow) and it works! It said "only kitkat" because at that time lollipop wasn't out you can see that the original post was dated from early 2014.
Click to expand...
Click to collapse
For some reason the driver keeps asking me to install it after flashing 2 the zips.
Guys, can you check this ROM(lollipop 5.1.1) for geiti94 which have all ready included this app. Very stable and battery friendly.
https://mega.nz/#!HdggTITL!C9bVqBlPwh8Kg8R7eeJQ_NokENEBwqmhkXBMNjwOZUs
Frankie_Xenon said:
For some reason the driver keeps asking me to install it after flashing 2 the zips.
Click to expand...
Click to collapse
Is your kernel still permissive? If not you can also try to flash the supolicy fix.
You can also try to remove completly the viper4android app and reinstall it.
Lastly there are some identified issues with some supersu versions. I am sure that the driver installation works with supersu 2.52 (my main one when I was on lollipop) and 2.68 (the one I use on marshmallow). Changing your supersu to 2.52 could perhaps help you. This is identified in the main viper4android thread here "If you see V4A installation pop-up loop, its probably due to incomplete root."
Hi. I have a G900H with stock rom, just rooted and Selinux enforcing and Viper works just fine. I just installed it and also installed busybox and flashed a file I got somewhere on xda to permit Viper on enforcing. I also had to verify my settings on supersu to uncheck the entry for namespaces. Hope it helps
Enviado desde mi SM-G900H mediante Tapatalk
So op, did you manage to make viper4android work?
alexbelgium said:
So op, did you manage to make viper4android work?
Click to expand...
Click to collapse
read the reply above you it gives you the solution
---------- Post added at 12:09 AM ---------- Previous post was at 12:04 AM ----------
alexbelgium said:
So op, did you manage to make viper4android work?
Click to expand...
Click to collapse
mannyvzla said:
Hi. I have a G900H with stock rom, just rooted and Selinux enforcing and Viper works just fine. I just installed it and also installed busybox and flashed a file I got somewhere on xda to permit Viper on enforcing. I also had to verify my settings on supersu to uncheck the entry for namespaces. Hope it helps
Enviado desde mi SM-G900H mediante Tapatalk
Click to expand...
Click to collapse
works like a charm thank you! lets spread this so more people will enjoy it
Also make sure "Mount Namespace Separation" is off in SuperSU.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello people!
First of all, excuse my lousy English! I'm using the translator.
Well, as soon as I upgraded my A5 (2017) to Nougat I looked for tutorials that would allow me to root to remove the useless apps that Samsung inserts into the device, and install those that are useful but not available to the average user (without root).
Among these is the ViPER4Android FX, which I could not use because of the SELinux (enforcing) native Kernel.
I have found a way to work without having to change the kernel.
What we need?
1. The minimum of prior knowledge.
2. Device with root.
3. Recovery modified. (like TWRP)
4. ViPER4Android FX zip file. (thanks guitardedhero)
5. supolicy zip file.
6. audio_effects.conf file.
7. File manager with root privileges. (like Root Browser)
8. Flash facilitator Application. (like Flashify)
9. Busybox. (like Stericson)
10. Application uninstaller. (like Root Uninstaller)
How to proceed?
1. With the Application Uninstaller remove Adapt Sound and SoundAlive.
2. With the flash facilitator, flash the ViPER4Android FX zip, after supolicy and reboot.
3. When you start, install Busybox.
3. Open the File Manager, navigate to /system/vendor/etc, and rename the audio_effects.conf file to audio_effects.conf.bak.
4. Copy the downloaded file of the same name, and paste it into the folder.
5. Set the -rw-r-r-- permission on the file and reboot.
6. When you start, open the ViPER4Android FX, allow root access and, if prompted, install the driver.
7. Set the settings in the application and enjoy a great sound experience!
Attached is the file with the settings I use. Put it in the ViPER4Android folder, at the root of your storage, and load the perfil in the application.
All merit goes to the people who made it possible by creating files and tutorials. I'm just sharing the information.
Works . Thank you :good:
i have a problem, busybox failed to be installed, can anyone help?
I use busybox in magisk and it's installed
what shoud driver status to be?
How can I know if it is work or not, coz nothing change in the sounds
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@Dinhodroid
Any help guys
Hi, has somebody tested V4A Fx fully working in A520F nougat? I'm extremely impressed with the audio quality of V4A Fx and I am using it in my Lenovo smartphone. I'm gonna root my A5 device if this is fully working. Appreciate any feedback please. TIA
@am2006 The procedure is described in the post, however I do not use the Magisk, so I do not know if the problem is related to it.
It can be the busybox installation site.
waltermsalomon said:
Hi, has somebody tested V4A Fx fully working in A520F nougat? I'm extremely impressed with the audio quality of V4A Fx and I am using it in my Lenovo smartphone. I'm gonna root my A5 device if this is fully working. Appreciate any feedback please. TIA
Click to expand...
Click to collapse
It works 100%!
Use on my A5 with Nougat.
Dinhodroid said:
@am2006 The procedure is described in the post, however I do not use the Magisk, so I do not know if the problem is related to it.
It can be the busybox installation site.
Click to expand...
Click to collapse
please show me your driver status to compare
am2006 said:
please show me your driver status to compare
Click to expand...
Click to collapse
attached
EDIT SOLUTION:
replacing the audio_effects.conf file in system/etc worked
hi all
can anyone please help me? i am using a samsung galaxy A5 2017 SM520F but with marshmallow
. https://imgur.com/gallery/buIa0
i have installed viper4android and it is enabled and everything seems good, execpt it never processes. i have tried with google play music and also the samsung music player, but it always says "Processing: No" in the driver status.
any ideas?
superjase said:
EDIT SOLUTION:
replacing the audio_effects.conf file in system/etc worked
hi all
can anyone please help me? i am using a samsung galaxy A5 2017 SM520F but with marshmallow
. https://imgur.com/gallery/buIa0
i have installed viper4android and it is enabled and everything seems good, execpt it never processes. i have tried with google play music and also the samsung music player, but it always says "Processing: No" in the driver status.
any ideas?
Click to expand...
Click to collapse
Try this: https://forum.xda-developers.com/oneplus-3t/themes/v4a-fix-processing-using-magisk-t3572819
Dinhodroid said:
It works 100%!
Use on my A5 with Nougat.
Click to expand...
Click to collapse
Thanks. Working perfectly on my A5. Phone speaker volume is a little low but works just amazingly on my skullcandy earphones.
It works 100% on A7 2017 (SM-A720F) THANKS!
Does this work on A3 Nougat?
pmajci said:
Does this work on A3 Nougat?
Click to expand...
Click to collapse
Yes.
dj_gilquirino said:
It works 100% on A7 2017 (SM-A720F) THANKS!
Click to expand...
Click to collapse
I need detailed tutorials on this. I need help. Thanks. I have A7 2017 too.
İ couldnt install the Busybox too.
am2006 said:
i have a problem, busybox failed to be installed, can anyone help?
I use busybox in magisk and it's installed
what shoud driver status to be?
How can I know if it is work or not, coz nothing change in the sounds
Click to expand...
Click to collapse
Hello, İ couldnt install the Busybox too. I think the problem is Magisk. cuz you and me are using the magisk for root. We had same problem. Any solution for us guys? Just failed to Busybox install..
---------- Post added at 09:35 AM ---------- Previous post was at 09:32 AM ----------
dj_gilquirino said:
It works 100% on A7 2017 (SM-A720F) THANKS!
Click to expand...
Click to collapse
which root are you using dude?(supersu or magisk?) Did you follow the guide step by step?
turkishield said:
Hello, İ couldnt install the Busybox too. I think the problem is Magisk. cuz you and me are using the magisk for root. We had same problem. Any solution for us guys? Just failed to Busybox install..
---------- Post added at 09:35 AM ---------- Previous post was at 09:32 AM ----------
which root are you using dude?(supersu or magisk?) Did you follow the guide step by step?
Click to expand...
Click to collapse
I use magisk, bro.
to bypass the busybox problem, flash this instead.
https://forum.xda-developers.com/apps/magisk/module-viper4android-fx-2-5-0-5-t3577058
dj_gilquirino said:
I use magisk, bro.
to bypass the busybox problem, flash this instead.
https://forum.xda-developers.com/apps/magisk/module-viper4android-fx-2-5-0-5-t3577058
Click to expand...
Click to collapse
im using magisk too..im sure i followed the guide step by step. i couldnt work viper4android i almost get crazy do you have any advice ?
Hi, I cannot get Viper4A working on my A5 after the latest nougat update. It says that busybox is not properly installed. Could someone help me fix this? TIA
Update - I got it 100% working by reflashing ViPER4Android FX and supolicy.