help me
Hi, I used PLK-L01 Honor 7 (C432B170), my phone was to be the status quo TWRP, fastboot. I need you to use Honor 7 Similarly, a full backup of your ROM using TWRP. then the entire backup file was sent to me and I will take him to restore files to my phone. only just that way. I also brought to a service center (not the local machine) but they did not help either. I tried to reflash the rom stock. up success but not the Android operating system. just suspended in the logo.
Just always tell me that honor to be 7 not download mode mode. and on how it is.
thanks
From what I understand, you are stuck on boot logo right?
You were on Marshmallow or Lollipop?
DigiGoon said:
From what I understand, you are stuck on boot logo right?
You were on Marshmallow or Lollipop?
Click to expand...
Click to collapse
Lollipop 5.0.2
Okay, you have to follow these steps to get back your system:
Download the lollipop build on you were before from here.
Extract UPDATE.APP from the zip file.
Extract system.img, boot.img, recovery.img, cust.img from the UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off your device and pressing and holding Vol DOWN + Power Button.
Flash all those files using these commands:
Code:
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cust cust.img
Once system boots up, do the three button update using that UPDATE.APP only.
hotboymen2026 said:
Lollipop 5.0.2
Click to expand...
Click to collapse
fixed your issue?
Related
Huawei recently shipped update B180.
They advised to unroot the phone first, but I have been stupid and updated with TWRP installed on the second recovery partition (e-recovery?) and the update failed.
My phone now won't boot. I can put it in fastboot/recovery mode and access TWRP, so I guess all I need is a stock ROM.
I cannot find anything useful for Honor 7 with Google, I would like a recent ROM (most recent I found is a B130).
I would also appreciate some advice on how to recover from this boot freeze.
Would flashing a stock ROM with TWRP be enough?
Thank you very much.
I'm kinda pissed since that phone is quite expensive.
You cannot flash a stock rom with TWRP.
You have to flash the stock recovery then a stock rom, using fastboot.
The more recent stock rom available is the B130, unfortunatly.
Have a look at my posts, I have done similar (although I had the normally recovery.img installed) you need to downgrade using the marshmallow downgrade ROM then to the full 121 or 130 ROM after putting the stock recovery back (for the version your phone was on before this happened I assume it was 170 if you were going to 180) once you are back on 130 you can then upgrade up to 180 through the usual process. I have done this a few times and it has been fine whilst experimenting with the device.
The current version of the phone appears to be burned in to it (I think curver.img is doing this inside the UPDATE.APP but I haven't found a way of flashing this file back to the phone to play around with downgrading without the MM downgrade ROM), this I think is what causes it to hang if it has a boot.img and recovery.img that does not match the version the phone thinks it is.
I am in the same boat with @rbuccia.
I can only access fastboot and recovery (twrp).
I also found that I must have something wrong with 3rdmodem because if i wipe form inside twrp I always get an error message on that partition.
Also I have a rom from Kangvip flashable with twrp but veven this has no effect.
I think that we cannot unbrick it without a completely and full stock rom but I think there is no one.
Any idea?
This method should work for the above, first we need to get your device to boot. The following should work... Extract UPDATE.APP from the B180 ROM and then extract boot.img and recovery.img using Huawei Update Extract. Now extract the UPDATE.APP from the full 130 ROM and extract system.img using the Huawei image extractor. Once you have them 3 files, place them in the same folder as your fastboot installation and do the following...
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
This should give you a working bootable phone, it will be a mess half 180 for Kernel etc... and the system itself will be 130 but it should boot. Then place the MM downgrade ROM into the dload folder on your SDCARD and run the update process, it will crash at 95% this is fine the phone will boot back up. Now place the UPDADTE.APP from 130 in the dload folder and run the update again, this should flash and give you a fully functioning normal system running version 130, then follow the update process to get back to 180.
The modem will get flashed as part of the 130 update package so hopefully that will resolve that issue for you as well.
james194zt said:
This method should work for the above, first we need to get your device to boot. The following should work... Extract UPDATE.APP from the B180 ROM and then extract boot.img and recovery.img using Huawei Update Extract. Now extract the UPDATE.APP from the full 130 ROM and extract system.img using the Huawei image extractor. Once you have them 3 files, place them in the same folder as your fastboot installation and do the following...
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
This should give you a working bootable phone, it will be a mess half 180 for Kernel etc... and the system itself will be 130 but it should boot. Then place the MM downgrade ROM into the dload folder on your SDCARD and run the update process, it will crash at 95% this is fine the phone will boot back up. Now place the UPDADTE.APP from 130 in the dload folder and run the update again, this should flash and give you a fully functioning normal system running version 130, then follow the update process to get back to 180.
The modem will get flashed as part of the 130 update package so hopefully that will resolve that issue for you as well.
Click to expand...
Click to collapse
Thanks for the tips, but
1. Where can i download the B180 full firmware?
2. I can't access the VOL+ VOL- POWer AKA updater mode, it just bootloops.
Thx :laugh:
Its on one of the threads at the top of General all the firmwares are there, no you don't need to do the vol+/- thing, just power power it down and then hold power up whilst plugging in to your PC. If this works the device will load up in fastboot and you should be able to flash what you need, to do the above the bootloader will need to be unlocked but you can do that from fastboot.
If your device is in a boot loop plug it in via USB to your PC and keep holding the volume up and when it reboots eventually it will go in to fastboot.
james194zt said:
Its on one of the threads at the top of General all the firmwares are there, no you don't need to do the vol+/- thing, just power power it down and then hold power up whilst plugging in to your PC. If this works the device will load up in fastboot and you should be able to flash what you need, to do the above the bootloader will need to be unlocked but you can do that from fastboot.
If your device is in a boot loop plug it in via USB to your PC and keep holding the volume up and when it reboots eventually it will go in to fastboot.
Click to expand...
Click to collapse
I must be blind, but i can only find the ota updates, not the full stock firmware :/
Thx tho, i'm starting to understand a bit better how it works and how i can fix it.
I'll just try to flash boot and recovery for B100 and B130 untill i cant make it work, for the system.app tho i can't take the B180 as i can't find it.
You need to use the system.img from B130 it is located here https://mega.nz/#!PlpXnLxD!azPTqEscNnwuSdrjpJJKO9zkyCpzAl7d6w3OpYx1se8 once you have this follow the above process and you should end up with a phone thats working and has the correctly matching firmware. Make sure you do it all though, just because it will boot with a mismatched boot loader and system.img doesn't mean you should keep it that way, it could be unstable and will cause issues with future upgrades.
james194zt said:
You need to use the system.img from B130 it is located here https://mega.nz/#!PlpXnLxD!azPTqEscNnwuSdrjpJJKO9zkyCpzAl7d6w3OpYx1se8 once you have this follow the above process and you should end up with a phone thats working and has the correctly matching firmware. Make sure you do it all though, just because it will boot with a mismatched boot loader and system.img doesn't mean you should keep it that way, it could be unstable and will cause issues with future upgrades.
Click to expand...
Click to collapse
Thx for the reply ! But that's what i said earlier, when i flash boot.img, system.img and recovery.img from the B130 update.app, the phone still bootloops.
I have access to the Huawei E-recovery if i do VOL+ POWER while the phone is plugged in the pc
I have access to the fastboot mode if i do VOL- POWER while the phone is plugged in he pc
I DON'T have access to the software mode upgrader if i do VOL+ VOL- POWER, no matter is the phone is plugged in or not
The phone still bootloops, plugged in or not.
:/
You need to flash boot.img and recovery.img from 180 and system.img from 130, sorry if that was not clear above! the boot loop is being caused because the boot.img doesn't match the version your phone thinks its on, if 180 doesn't work try the version before you upgraded i.e. 170 the system.img is just the android OS if you see HONOR glowing then you are booting system.img at that point but if it isn't glowing then you are still in the bootloader at that point so you need to sort out boot.img.
I've never been in 180, and as i said, i can't take the boot and recovery.img from the OTA update, i need a full stock firmware of B180 ! :/
Thx for the help tho.
I already tried to flash boot.img from B100 b121 and B130, and the phone still bootloops :/
http://forum.xda-developers.com/hon...dating-to-b180-fastboot-t3317249#post65420964
This fixed it!
Found this and it worked for me.
Download latest Official Full ROM from EMUI's site, HuaweiUpdateExtractor and adb / fastboot.
2. Unzip ROM and open UPDATE.APP with HuaweiUpdateExtractor.
3. Extract SYSTEM.img and RECOVERY.img (delete .header files that HuaweiUpdateExtractor generates you need only .img files) and put them in adb folder.
4. Boot in fastboot and conect to PC. (You can achieve this from TWRP to boot to bootloader, adb dosent work but fastboot will there is also key combination to get to bootloader/repair mode or what it is).
5. Open cmd.exe from adb folder and type (or copy-paste) the follow commands one by one:
Code:
fastboot devices
Code:
fastboot flash recovery RECOVERY.img
Code:
fastboot flash system SYSTEM.img
And finally where i had some trouble:
If you got no permissions try again or take usb cable off etc. Took me while to get back from same situtation. Few reboots to TWRP and to bootloader and USB replugging while in bootloader.
And for LINUX: i used split_updata.pl-master from github to extract the .APP/Firmware needed to sudo fastboot aswell.
Hiiiii guys
Please help me respected sir and other friends.
Anyone have twrp backup of stock rom ?
Because I want go back to stock rom and I have only twrp not pc please thanks in advance
Good evening everyone , I have a big enough problem . Mistakenly I did wipe of all phone including system by TWRP and now it will not start . I suppose to to flash the stck ROM but i don't have it, could you help me ?
i can only enter in twrp , no system
aboumoslih said:
Good evening everyone , I have a big enough problem . Mistakenly I did wipe of all phone including system by TWRP and now it will not start . I suppose to to flash the stck ROM but i don't have it, could you help me ?
i can only enter in twrp , no system
Click to expand...
Click to collapse
You can solve your problem with Multi Tools and -Unbrick from bootloop
Follow these steps in order to return it to fully stock:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
Hope this helps you.
hi so my buddy honor 7 got semi brick after he tried to root , luckily twrp recovery still works so i flashed custom rom H7T B370 V10.1 AND IT WORKS FINE.
I WANT TO FLASH A STOCK ROM .
is there a safe way because im scared of this phone honestly i use to have htc senstation i change the rom every weekend lol. but with this one i need advice plzz
thnx
Hi, you are supposed to do a TWRP backup before flashing/ try to root, so just restore it.
Envoyé de mon PLK-L01 en utilisant Tapatalk
Theres no backup
You have to flash the files extracted from B371's UPDATE.APP, the files you need to flash are system.img, boot.img, cust.img, recovery.img
and after doing that, do the famous three button update with that UPDATE.APP only.
Hope this helps.
acesama said:
hi so my buddy honor 7 got semi brick after he tried to root , luckily twrp recovery still works so i flashed custom rom H7T B370 V10.1 AND IT WORKS FINE.
I WANT TO FLASH A STOCK ROM .
is there a safe way because im scared of this phone honestly i use to have htc senstation i change the rom every weekend lol. but with this one i need advice plzz
thnx
Click to expand...
Click to collapse
Unroot if he has root.
Extract System.img, Boot.img and Recovery.img from B370 and flash them manually.
How? Any tut pls
Szumy said:
How? Any tut pls
Click to expand...
Click to collapse
Follow below steps and you are good to go:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
Szumy said:
How? Any tut pls
Click to expand...
Click to collapse
Go to SuperSU and in settings select full unroot.
Reboot the phone and check the unroot with some app you might have installed that requires root privileges.
Extract recovery.img from update.app file inside of B370 zip update file.
Install minimal ADB and fastboot in your PC
Install latest Google ADB driver
Reboot your PC.
Connect your H7 to PC.
Reboot H7 into fastboot mode.
Copy recovery.img to ADB fastboot folder in your PC.
Run ADB in your PC.
Run ADB commands:
fastboot devices - should reply with a device (yours)
fastboot flash recovery recovery.img
fastboot reboot
Copy the update.app from B370 zip file to a "dload" folder in your phone. Either in root of SDcard your root of phone.
Turn off phone.
Press simultaneously vol+- and power until you see any screen. Should be the update screen. It will update then reboot.
Factory reset and your done.
digigoon said:
follow below steps and you are good to go:
download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from update.app using huawei update extractor tool.
boot into bootloader mode by switching off the phone then pressing only the vol down button, and connecting it to pc simultaneously.
flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
after doing this put that very update.app from which you extracted the files in dload folder of your external sdcard.
switch off your phone, and press vol up + vol down + power button simultaneously.
your device will now get to the full stock firmware.
note: if the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e putting the update.app from which you extracted the files in dload folder of your external sdcard and pressing vol up + vol down + power button simultaneously after switching off your phone.
Click to expand...
Click to collapse
thnx thats very helpful
@acesama
Awesome..!!
I am in bootloop after flashing the files (I did unroot) . How do i Fix that? I can only go in fastboot mode
Szumy said:
I am in bootloop after flashing the files (I did unroot) . How do i Fix that? I can only go in fastboot mode
Click to expand...
Click to collapse
Please boot into recovery, wipe cache and dalvik cache, reboot. It might take a bit longer to boot but if does not boot for 15, 20 minutes then you are in bootloop again.
Report back if that happens.
---------- Post added at 06:18 PM ---------- Previous post was at 06:15 PM ----------
Szumy said:
I am in bootloop after flashing the files (I did unroot) . How do i Fix that? I can only go in fastboot mode
Click to expand...
Click to collapse
Did you flash the same firmware you had before or a different one?
Szumy said:
I am in bootloop after flashing the files (I did unroot) . How do i Fix that? I can only go in fastboot mode
Click to expand...
Click to collapse
Probably because either of these:
1 - still using TWRP recovery - need to flash stock recovery.img
2 - corrupted boot.img - flash cust, boot, recovery and system img files from CURRENT B1xx or B3xx ROM update file.
DigiGoon said:
Follow below steps and you are good to go:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
Click to expand...
Click to collapse
Hey, im trying this method and im stuck at 5%. how long does the install usually take? Thanks in advance
ocali94 said:
Hey, im trying this method and im stuck at 5%. how long does the install usually take? Thanks in advance
Click to expand...
Click to collapse
A while, don't stress out and have to phone fully charged and/or connected to the charger. It can last like 20 minutes.
Hi i used this method and did everything how DigiGoon said, but with B390. No its stuck at 5% for the last two hours. should i stop the update?
Raleor said:
Hi i used this method and did everything how DigiGoon said, but with B390. No its stuck at 5% for the last two hours. should i stop the update?
Click to expand...
Click to collapse
have you solved the problem or need help?
Did you try the correct package.
Nice idea but I have no pc only twrp recovery please anyone have twrp backup ?
[email protected] said:
Nice idea but I have no pc only twrp recovery please anyone have twrp backup ?
Click to expand...
Click to collapse
Twrp backup of stock rom??
hassanjavaid8181 said:
Twrp backup of stock rom??
Click to expand...
Click to collapse
Sorry I not have twrp backup so plz I need twrp backup anyone share it to me thanks in advance
Hi I havae huawei plk-l01 single sim eu phone.
First I want to make a root.
Unlcked Bootlader succesfully.installed twrp succes and root succesfuly flashed.
After reboot
phone bootloop.
and I dont know what is my Bxxx versiion.Please help me How can I reborn this phone :S
Hi , flash this file for root , works both for B121 to B371.
https://drive.google.com/file/d/0B3O4DzQkXNR4aFoxbXk5cmZPRlE/view?usp=sharing
it's a super SU adapted to Honor7 by me
.
technopark said:
Hi I havae huawei plk-l01 single sim eu phone.
First I want to make a root.
Unlcked Bootlader succesfully.installed twrp succes and root succesfuly flashed.
After reboot
phone bootloop.
and I dont know what is my Bxxx versiion.Please help me How can I reborn this phone :S
Click to expand...
Click to collapse
You have to flash the Stock firmware in order to reborn the phone.
Follow these steps in order to do that.
Download your latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Flash recovery first using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will nw get to the full stock firmware.
This will help you get your fone back from loops.
As soon as I bring up the fingerprint enroll screen, it immediately flashes an error message saying that enrollment failed. See screenshot.
This is a stock ROM that I had restored with TWRP, so I imagine this is part of the problem.
@DigiGoon
harryspar said:
As soon as I bring up the fingerprint enroll screen, it immediately flashes an error message saying that enrollment failed. See screenshot.
This is a stock ROM that I had restored with TWRP, so I imagine this is part of the problem.
Click to expand...
Click to collapse
It probably is part of the problem. you could try to originaly update your phone the oficcial way. Flash the stock recovery and drop a oficcial update in your dload folder. it should restore your phone and it should all be fixed. from that you can update to android 6.0.
Cheers:good:
Try to update it manually, assuming you were rooted, follow these steps:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
DigiGoon said:
Try to update it manually, assuming you were rooted, follow these steps:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
NOTE: If the manual flashing doesn't works or you get any errors, then first try only the force update method, i.e Putting the UPDATE.APP from which you extracted the files in dload folder of your external SDCARD and pressing Vol UP + Vol DOWN + Power button simultaneously after switching off your phone.
Click to expand...
Click to collapse
I hate to correct you (your post are very helpful) but we have never been able to fastboot flash /cust
the TWRP posted here by @yuweng can restore the /cust.img
TWRP Download > https://www.androidfilehost.com/?fid=24588212152305793
clsA said:
I hate to correct you (your post are very helpful) but we have never been able to fastboot flash /cust
the TWRP posted here by @yuweng can restore the /cust.img
TWRP Download > https://www.androidfilehost.com/?fid=24588212152305793
Click to expand...
Click to collapse
Thanks for the correction, but I wanna know, what error do you get when flashing cust.img?
Sent from my Huawei Honor 7 using Tapatalk
DigiGoon said:
Thanks for the correction, but I wanna know, what error do you get when flashing cust.img?
Sent from my Huawei Honor 7 using Tapatalk
Click to expand...
Click to collapse
Fastboot commands on flash cust cust.img fail with the error "Remote: Command not allowed"
Code:
fastboot flash cust CUST.img
target max-download-size: 254MB
sending 'cust' (196335 KB)...
OKAY [ 6.493s]
writing 'cust'...
FAILED (remote: Command not allowed)
finished. total time: 6.493s
You get this error only on flashing cust?
Sent from my Huawei Honor 7 using Tapatalk
DigiGoon said:
You get this error only on flashing cust?
Sent from my Huawei Honor 7 using Tapatalk
Click to expand...
Click to collapse
no their are other partitions that cannot be flashed with fastboot, I don't have the full list
Yes some partitions are not flashable but system, cust, recovery, boot should be. We should look into this.
Sent from my Huawei Honor 7 using Tapatalk