Related
Hello forum, please excused my poor english.
A few month ago i was writing a text message when my phone screen doesn't work some parts of the left side (in that moment i was using cm11 android 4.4.4, recovery bigpart). So in that moment i do not care, i was using it with the keyboard horizontal. But with the passage of time the bluetooth, font camera and wifi doesn't work correctly.
I think it was a rom trouble, so i reset my phone, but it doesn't work. I reinstall the rom, doesn't work too. Even i installed the mokee rom (android 5.0.2).
Before cm11 i used cm7, cm9 4.0.4, cm10 cm10.1 (android 4.1.1, 4.1.2, 4.2.2, 4.3) and the phone work correctly (except some bugs ). So i reinstalled every of that's roms... the same problem.
I followed the instructions in this article https :// phenobarbital.wordpress.com/2014/08/22/motorola-android-rescatando-al-soldado-atrix-4g . Doen't work too
Searching in youtube i saw a lot of people with the same problem and one of the user comment that it should be the kernel, so i flash every kernel for atrix mb860 that i found in the internet... guess what, nothing.
I'm actually using a miui rom android 4.2.2., it work AMAZING and do not reheat instead from cm7 to cm11 and mokee rom, but i have the same trouble jaja.
with this rom and cm10.1, cm11 and mokee the kernel is the same 3.1.10, i think perhaps this is the cause, but when i try to flash another rom i loss android, then i have to reinstall it (now i know why).
I'm searching for a different kernel that work in android 4.2.2 up.
I'm sorry if i bored you and excused my poor english again if anyone can helpme i being really really grateful, i love that cell phone.
Forza Motorola Atrix 4g mb860 <3
I share a srennshot that show what is the part of sreen that do not work, it is just the space between the vertical lines, ignore the horizontal lines mega : /// #!5IgjmIRI!OFwb0qz2XHv3GvkkZCQiB5NRyL6PceMbfGmxXKLa6qc .
Is it touch screen or screen inside that don't work? U can try official android 2.3 and test all function it's the best, some time ago I have problem with touch screen and it stop working on left side so I had to replace it, about BT and WiFi it the chipset that stops working mosty because of heat that cpu/gpu produced and it's near it. Currently i'm using cm 12.1 (build from 14.06.2016 with kernel 3.1.10 and security patches 01.05.2016) which have few bug like not working fingerprint sensor and wrongly showing that I don't have gsm connection but I have, rest is great wifi, bt, gsm data, camera, sound all work and phone don't restarts like it was sometime on kitkat.
I don't understand. In the left side of the touch doesn't work. I try with a rom named darksideblur etc i think it is 2.3, but it's the same. When i using a recovery touch the left side work, that's the reason beacause i think that may be it is a kernel trouble.
I should try with a 2.3 stock rom.
And you should try with a miui rom jaja
lokr said:
Is it touch screen or screen inside that don't work? U can try official android 2.3 and test all function it's the best, some time ago I have problem with touch screen and it stop working on left side so I had to replace it, about BT and WiFi it the chipset that stops working mosty because of heat that cpu/gpu produced and it's near it. Currently i'm using cm 12.1 (build from 14.06.2016 with kernel 3.1.10 and security patches 01.05.2016) which have few bug like not working fingerprint sensor and wrongly showing that I don't have gsm connection but I have, rest is great wifi, bt, gsm data, camera, sound all work and phone don't restarts like it was sometime on kitkat.
Click to expand...
Click to collapse
Do you have the link of your rom and parches? Or may be i can fix mine?
pendejete said:
Do you have the link of your rom and parches? Or may be i can fix mine?
Click to expand...
Click to collapse
Yup, here --> firmware or firmware choose some of these, there are for european and us model, best for eu is 1FF-olympus_emara-user-2.3.4-4.5.2A-74_OLE-31.20-release-keys-signed-NonEFIGSRetail-EU.sbf.gz for us idk I don't have us model. Flash it through rsd lite under windows 7 because under win 8 or 10 rsd lite don't recognize phone.
lokr said:
Yup, here --> firmware or firmware choose some of these, there are for european and us model, best for eu is 1FF-olympus_emara-user-2.3.4-4.5.2A-74_OLE-31.20-release-keys-signed-NonEFIGSRetail-EU.sbf.gz for us idk I don't have us model. Flash it through rsd lite under windows 7 because under win 8 or 10 rsd lite don't recognize phone.
Click to expand...
Click to collapse
Thank you very much, i will comment later the results... I have rsd lite but i never used it instead i used sbf flash.
pendejete said:
Thank you very much, i will comment later the results... I have rsd lite but i never used it instead i used sbf flash.
Click to expand...
Click to collapse
well flashing that firmware i get this error message h ttps://mega.nz/#!0Qp10AwR!IcPEfoZYsMIJdrHVpq3lrUz-AYKXZ6eadDLBz4l7EJs . And i could see that the problem actualy is the screen (hardware) because in the recovery touch the left side doesn't work, i was wrong... at the end is a hardware trouble. Thank you very much again, i really really appreciate your help.
pendejete said:
well flashing that firmware i get this error message h ttps://mega.nz/#!0Qp10AwR!IcPEfoZYsMIJdrHVpq3lrUz-AYKXZ6eadDLBz4l7EJs . And i could see that the problem actualy is the screen (hardware) because in the recovery touch the left side doesn't work, i was wrong... at the end is a hardware trouble. Thank you very much again, i really really appreciate your help.
Click to expand...
Click to collapse
Interesting, the same problem occurred at my screen too, and precisely in this section (like it is on your screen) screen not work,
when I move a finger across that part of the screen, cursor skips that part.
Have you solved the problem, and how?
Motorola Atrix 4g, 4.4.4 KitKat
Flyme 7 Coming to Older Phones Like Meizu PRO 5.. to see click here :fingers-crossed:
It's good news, currently only 4.7% of mobile phones have Oreo.
The trouble is until Flyme gets stable
And if there are new drivers maybe someone (@faust93) is able to port it to Resurrection Remix 6, which is still in beta on most phones
You just have to wait and all the pieces are put together
They just released the Meizu 15 with Android 7.1.2. and Flyme OS 7, does not even come with Oreo.
I'm very disappointed!
Meizu is one year behind in the design and software of its mobile phones. They pass the fashions without offering anything.
I expected them to catch up, but nothing. He's going to win a bad name forever.
They will end up putting the sign closed for vacations, which we already know what it means.
Above, they do not pay Google for having Google Play well. The International Version is a fake, they aren't Certified
And they also have blocked the bootloader so you can not install any ROM (there are none in the Meizu Pro 6, Pro 7).
My next mobile will not be a Meizu is clear. In 2015, they competed with Xiaomi, I thought that they would get over them but they have chosen very bad strategies, such as making several versions (China, the International), moving away from Google, problems with apps, very similar designs for all their phones, prices that are too high compared to the competition , many software failures in Flyme, without Android updates ...
Luckily I have it with RR and Android 7.1.2 (in 3G and without finger print but this does not matter at all). And I'm happy with him !!
You do not need another Android if you have it well customized (Substratum, Exposed, Magisk Manager ..).
But it would be cool to have RR with Oreo..
Flyme 7 is out since 22.04.18 and IS NOT BASED on Oreo
It's again based on Nougat 7.0
I've tried 7.8.4.22 A, not soo bad, some little bugs with camera and other things but overall 's good
in 2022 i bet they are going to have oreo
or meizu will die
Meizu has disappointed me so much that I bought another mobile (not from Meizu). I have endured so much thanks to the Faust93 ROM but I could not do it anymore, it was a little on a whim, more than other things
Meizu was downgrading ever since 2015 and their strategy to focus on the Chinese market with dozens of new devices every year led to abandoning all their previous flagships and lack of focus on software updates. Obviously providing regular up-to-date upgrades does not bring in too much revenue compared to the new devices ranging from budget to flagships that bring in millions. This fact showed their real face - hunt for money rather than for creating an outstanding product and attracting even more customers. Pro 5 is my first Meizu phone and is definitely the last one. Even with running RR 7.1.2 and fully and smoothly functioning hardware, I do really lack fingerprint option and I don't like having any sacrifices on the device. which once used to be a flagship and still has pretty powerful insides to date. I like trying different roms and flashing firmware, but for the testing purposes, not because I am forced to in order to have more or less up-to-date Android version and properly working Google Services and Play Store. This is just ridiculous and disgusting.
Did someone tried flyme 7, this version 7.8.5.8?
hi everybody.
I'm surfing the internet.
https://www.getdroidtips.com/flyme-os-7-meizu-pro-5/
I came across this site.
I downloaded and installed the Meizu pro5 Flyme 7.0.2.0A from the https://www.flyme.cn/firmwarelist-23.html#3 link provided on the site. I got backup of my phone. I've installed wipe cache. And it works.
I wanted to share it with you.
Notes:
- I had a flyme 6.3 rom.
- I installed vipe cache from the first installation. sim network did not work. vipe cache cleaning and installed all functions worked.
-Flyme has added facial recognition and works very nicely.
- Press the power button. I installed the version uplink type. As described in the first link. (https://www.getdroidtips.com/flyme-os-7-meizu-pro-5/)
-I've been using it for two days. very nice. Flyme7 is the original system board and stable.
- Before loading, change the ro.product.locale = zh-CN line in the zip file (update.zip/system/build.prop) to -> ro.product.locale = en-US.
- Bad news - I use English. Problems can occur in other languages.
The pro5 really got android 8.0!?
Maybe I should (after switching to the global version a year ago) back to the chinese roms...
Are the google apps all working? Incl. contacts etc?
Thanks already for the update!
pro 5 now is with oreo??
i´m speechless lol
Unfortunately nope, Oreo was only a dream for us
kanaxe said:
hi everybody.
I'm surfing the internet.
https://www.getdroidtips.com/flyme-os-7-meizu-pro-5/
I came across this site.
I downloaded and installed the Meizu pro5 Flyme 7.0.2.0A from the https://www.flyme.cn/firmwarelist-23.html#3 link provided on the site. I got backup of my phone. I've installed wipe cache. And it works.
I wanted to share it with you.
Notes:
- I had a flyme 6.3 rom.
- I installed vipe cache from the first installation. sim network did not work. vipe cache cleaning and installed all functions worked.
-Flyme has added facial recognition and works very nicely.
- Press the power button. I installed the version uplink type. As described in the first link. (https://www.getdroidtips.com/flyme-os-7-meizu-pro-5/)
-I've been using it for two days. very nice. Flyme7 is the original system board and stable.
- Before loading, change the ro.product.locale = zh-CN line in the zip file (update.zip/system/build.prop) to -> ro.product.locale = en-US.
- Bad news - I use English. Problems can occur in other languages.
Click to expand...
Click to collapse
can i use this as daily driver? any bugs etc?
Mollic said:
can i use this as daily driver? any bugs etc?
Click to expand...
Click to collapse
U can use it as daily rom, it's almost near to perfection. But it's not new, it's 2018.08.10 so 3 months old.
:good:
Hi all,
Since it seems there are not updates coming for the global version of pro5 anymore I am considering to switch to the Chinese ROM.
Is it possible to install the latest Chinese version to a GLOBAL Pro5?
If it is a more complex process, do you have instructions a link that shows how to do it?
Thanks a lot!
Jan
badreligion said:
Hi all,
Since it seems there are not updates coming for the global version of pro5 anymore I am considering to switch to the Chinese ROM.
Is it possible to install the latest Chinese version to a GLOBAL Pro5?
If it is a more complex process, do you have instructions a link that shows how to do it?
Thanks a lot!
Jan
Click to expand...
Click to collapse
i think you have to change the product label to chinese ( i tried without doing so and i failed miserably )
it's depend on what recovery you use to update, stock or TWRP. If with TWRP, you need to replace bootloader and recovery in zip to be unlocked bootloader and custom recovery.
Hello everybody,
I own a Xiaomi MI 10 with the latest stable MIUI 12 EU ROM,
since I did the update from MIUI 11 I am having problems in pairing the phone with the VW e-UP infotaiment system (called Composition Phone).
In practice, once paired after a few seconds it uncouples and then after a while retry a new pairing which after another few seconds it disconnects and so on ..
I tried all the developer settings a bit but they didn't help.
I also noticed that going to the bluetooth devices of the phone, if I tap on the name of the infotainmet just before the automatic procedure starts, then the pairing is successful and no longer disconnects.
Anyone have the same problem with a VW? is there a solution? I also installed Magisk, is it possible to patch the bluetooth libraries?
Same exact machine and exact same problem.
You Found solution?
I am waiting for xiaomi to give me the code to unlock the bootloader and I will go back to the UMIGlobal_V12.0.1.0.QJBMIXM which worked perfectly for me.
dottorniù said:
Same exact machine and exact same problem.
You Found solution?
I am waiting for xiaomi to give me the code to unlock the bootloader and I will go back to the UMIGlobal_V12.0.1.0.QJBMIXM which worked perfectly for me.
Click to expand...
Click to collapse
Great! it's nice to know you're not alone where are you from?
I can tell you that I tried the latest EU ROM and it didn't work, but the EU compared to the global one has several nice features more. Since you have to unlock I advise you not to put the global again.
Before downgrading I would like to try the ROM EU weekly which if I have not misunderstood is based on the MIUI 12.5 beta, but for the moment I have not yet done so ..
Hi.
giacomobe said:
Great! it's nice to know you're not alone where are you from?
I can tell you that I tried the latest EU ROM and it didn't work, but the EU compared to the global one has several nice features more. Since you have to unlock I advise you not to put the global again.
Before downgrading I would like to try the ROM EU weekly which if I have not misunderstood is based on the MIUI 12.5 beta, but for the moment I have not yet done so ..
Hi.
Click to expand...
Click to collapse
giacomobe said:
Great! it's nice to know you're not alone where are you from?
I can tell you that I tried the latest EU ROM and it didn't work, but the EU compared to the global one has several nice features more. Since you have to unlock I advise you not to put the global again.
Before downgrading I would like to try the ROM EU weekly which if I have not misunderstood is based on the MIUI 12.5 beta, but for the moment I have not yet done so ..
Hi.
Click to expand...
Click to collapse
Even the weekly does not work
I finally managed to solve the problem with the ROM
xiaomi.eu_multi_MI10_V12.0.8.0.QJBCNXM_v12-10.zip
which also works very well .. In any case I begin to think that it does not depend on the MIUI version, but on the version of android. I think the bluetooth management problems are due to android 11.
A bit late but have you tried changing the Bluetooth protocols in developer settings? You can change the version etc..
I have a new e-UP since yesterday.. same problem here with MIUI 12.5.1.0 on Poco F3.
Any solution without downgrading the rom? (MIUI 12.0.5.0 is also Android 11 on F3)
I think i will go for a Custom Rom in the next few days..
Does the latest Maps+More update changes anything? It says "Android 11 compatibility"..
HI Guys,
For me this problem is still alive. I'm running a VW E-Up also and since updating to MIUI 12 my car bluetooth is unusable as it constantly connects and disconnects to my M10 every 5 seconds or so. I've experimented with many settings changes, along with unpairing and re pairing but all to no avail.
I'm running 'Maps and More' ver 5.0.0 also but it's useless as I can't stay connected long enough to do anything with it.
Has anyone found a fix without downgrading?
Same problem here... any news/solution?
Volkswagen Up
MIUI Global 12.5.5.0 RKIEUXM
Security Patch 2021-08-01
Xiaomi Mi 11 Lite 5G
Hi guys,
I have similar issue since version later than 12.5.3. I even changed my phone to other xiaomi model, the issue remains.
So I will flash back to 12.5.3 if the issue cannot be solved in 3 months...
Now I have to turn on and off airplane mode to temporarily solve the issue every time I need to use Bluetooth related functions.
yzkzero said:
Hi guys,
I have similar issue since version later than 12.5.3. I even changed my phone to other xiaomi model, the issue remains.
So I will flash back to 12.5.3 if the issue cannot be solved in 3 months...
Now I have to turn on and off airplane mode to temporarily solve the issue every time I need to use Bluetooth related functions.
Click to expand...
Click to collapse
Try this: https://llamalab.com/automate/community/flows/40450
Hy folks,
Idk if the Bluetooth is the same but I got the skoda citigo with the Garmin device. Had the same issue. The resolution for me was to activate developpers options and change the Bluetooth Codecs to what my GPS device supports as it was way older than the one build in my redmi note 11
My perfect solution: I deactivated the work profile, and eveything is fine again!
So I possess a Redmi Note 10 Indian variant with 4 GB ram. For the past month, I have been using Pixel Experience Plus and it was smooth until the last week's update. Then it came to my notice that I haven't installed the latest MIUI 13 "Firmware" as the developer said. So I got and flashed the Global ROM V13.0.5.0.SKGMIXM (even though my device was shipped with Indian ROM) via Xiaomi Flash because Indian ROM V12.5.6.0.RKGINXM is still in MIUI 12.
Oops! That was probably the worst mistake I had made coz my phone had restarted at least a dozen times unexpectedly even while the phone is locked and unlocked (referring to screen lock) Now it's barely usable.
So here are my questions:
Is this a bug with MIUI or did I mess something up big time?
I use the terms firmware and ROM interchangeably but are they different?
How to install firmware via fastboot?
I know that was a lot of questions but please help me if possible because this is my main device
Thanks a lot
Injector287 said:
So I possess a Redmi Note 10 Indian variant with 4 GB ram. For the past month, I have been using Pixel Experience Plus and it was smooth until the last week's update. Then it came to my notice that I haven't installed the latest MIUI 13 "Firmware" as the developer said. So I got and flashed the Global ROM V13.0.5.0.SKGMIXM (even though my device was shipped with Indian ROM) via Xiaomi Flash because Indian ROM V12.5.6.0.RKGINXM is still in MIUI 12.
Oops! That was probably the worst mistake I had made coz my phone had restarted at least a dozen times unexpectedly even while the phone is locked and unlocked (referring to screen lock) Now it's barely usable.
So here are my questions:
Is this a bug with MIUI or did I mess something up big time?
I use the terms firmware and ROM interchangeably but are they different?
How to install firmware?
Finally, can I safely downgrade my device to the 12.5.6 Indian variant without bricking my device?
I know that was a lot of questions but please help me if possible because this is my main device
Thanks a lot
Click to expand...
Click to collapse
First off, don't try to make an update while the device has a kind of lock, either the screen or user encryption (not referring to in-built encryption).
Generically, firmware makes a reference to a specific build, this applies for any ROM, for any device out there.
The set of specific partitions, that are called firmware in the Xiaomi world, are also in any fastboot ROM.
But like the different firmware versions are usually available for almost (if not all) Xiaomi devices, in great part, thanks to @yshalsager, you can just pick up the one you need and flash it before or after (over) any (that supports it or needs it) custom ROM.
Just refer to here https://forum.xda-developers.com/t/firmware-redmi-note-10-mojito-auto-updated.4254017/page-3 as you can see, what you need, was there.
Well what i can tell you with experience might enlighten the situation. I changed my rom from global to Indonesian on MIUI 12. It was working very well no lags no issue infact i was loving it . Then came MIUI 13 V13.0.2.0.SKGIDXM.
my phone became like a sluggish snail. A lot of lags, different apps not working really hateful. There was no escape. so after bearing it was 2 months i down graded back to MIUI 12. Now i think i will stay there until some one let me know MIUI 13 is bug free
Hello all,
I am on TLFEUXM 14.0.8.0 and have some issues with the DJI Mic compatibility.
The DJI Mic has USB-C and is set to stereo. When I am in video mode (standard camera app com.android.camera 4.5.002440.0) in pro mode and the DJI Mic is NOT plugged in, the audio recorded is stereo. I can see the bars of the VU-meter move independently.
When I plug in the DJI Mic, the audio recoreded is mono, although the DJI Mic delivers stereo output.
I also tried a 3rd party camera, but the audio is mono.
The DJI Mic works flawlessly with a Xiaomi Mi10T Pro (Miui 13) and a Pixel 6 (Android 13).
According to Xiaomi customer support it is a software problem and that I should wait for an update
Maybe some one here has some more detailed insights, if it is a Miui 14 issue or and specific Xiaomi Android issue. Or maybe customer support does not know it better and it is a hardware issue after all?
Cheers
toshidude
"According to Xiaomi customer support it is a software problem and that I should wait for an update"
Surely since the 14.0.8.0TLFEUXM is a Mi Pilot.
Hello,
thank you. What exactly does "Mi Pilot" mean?
Cheers
toshidude
toshidude said:
Hello,
thank you. What exactly does "Mi Pilot" mean?
Cheers
toshidude
Click to expand...
Click to collapse
Test roms(Mi pilot) made available for those who wish to test and normally this requires registration.
That's the theory but in reality Xiaomi updates them on the stable channels, same thing with the stable beta or public beta.
It started a few years ago and despite the protests issued by users who found themselves with bricks, today nothing has changed.
And sometimes with a Mi pilot you get stuck on it, update impossible.
Hello,
thank you. I was on 14.0.7.0 when I got the information I should wait for a new version. That is why i upped to 14.0.8.0.
So 14.0.8.0 is sort of a stable/beta/but not official version and chances are I won't be able to update to the upcoming official release? Is there a stock rom for the 12T Pro with MIUI 13?
cheers
toshidude
The latest stable is V14.0.7.0.TLFEUXM.
If the bootloader is not unlocked, you will not be able to downgrade or install another rom.
Hello,
wow! Youre fast I have already started the unlock me device bootloader thingie and if I am not mistaken
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
this is the ROM with MIUI 13 but I will have to dive more into that matter b4 going to something I might regret
Cheers
toshidude
toshidude said:
Hello,
wow! Youre fast I have already started the unlock me device bootloader thingie and if I am not mistaken
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
this is the ROM with MIUI 13 but I will have to dive more into that matter b4 going to something I might regret
Cheers
toshidude
Click to expand...
Click to collapse
With the bootloader unlocked, I advise you to install a Xiaomi Eu rom, more options than stocks, play store certified.
MIUI 14 - 23.3.27/28
Status: RELEASED RULES WHEN POSTING 1. If a ROM is not published DONT ASK ABOUT ITS ETA 2. If a ROM is not published DONT ASK why! 3. If a ROM is available, download it and use it 4. If a ROM has bugs, post the bug to the bug section if the BUG is not already listed 5. If you use any form of...
xiaomi.eu
MIUI 14 - MIUI 14 STABLE RELEASE
Status: RELEASED RULES WHEN POSTING 1. If a ROM is not published DONT ASK ABOUT ITS ETA 2. If a ROM is not published DONT ASK why! 3. If a ROM is available, download it and use it 4. If a ROM has bugs, post the bug to the bug section if the BUG is not already listed 5. If you use any form of...
xiaomi.eu
But if you want to stay on a stock, install a global.
Hello,
thank you for your input. So if I install Xiaomi EU Rom and the DJI Mic still does not work 100% with the Mi 12T Pro then I can post that as a bug with the creators of this EU Rom?
Cheers
toshidude
Did you install a stable or Weekly?.
The xiaomi Eu rom is based on the stock rom and is not modified at this level, the bug comes from Xiaomi.
Hello,
i did not install anything, wait time for unlocking is not over yet.
As far a Xiaomi goes, customer support is not very helpful and I am a little torn wether to downgrade to MIUI 13 only to find out that it is a hardware issue after all
How can i find out if 14.0.8.0 TLFEUXM is out of "Mi Pilot" status and now official?
Thanks for your support.
Cheers
toshidude
He won't publish it with the same name.
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Try a Xiaomi EU weekly, the most advanced since based on CN firmware.
Either way, unlocking will erase your data.
Hello,
thanks for your advice I am fully aware of that And since I reset the phone to factory defaults twice in the last 2 weeks, all images/videos reside in a cloud solution and apps in use are reduced to a absolut minium.
Xiaomi EU weekly is based on the original 14.0.8.0 from Xiaomi, correct? So I assume the problem will still be present in the EU weekly. I think I use the weekend to make up my mind what to do.
Thank you so much for your input.
Cheers
toshidude
Xiaomi EU weekly is based on the original 14.0.8.0 from Xiaomi, correct?
Nope,Stable not Weekly
Just update,no need format data.
V14.0.23.3.27.DEV 2023-03-31
Hello,
after doing a lot of reading weekly and stable forum I think I live with BLE bug and incompatibility with DJI Mic.
@NOSS8 Thank you for answering a lot of my questions I will post it here, when Xiaomi has fixed the DJI Mic incompatibility.
Cheers
toshidude