Dear list,
Since last two days I tried to root my lenevo A60 aka spice Mi-350 in India ( android - 2.3.3 ) without any success and now searching for help. I have first tried with the following
1. A60-tools-v2 in winxp (http://forum.hotmid.com/discussion/...60-install-google-market-and-gmail-account/p1)
2. http://lephone-a60.ominis.net/how-to-root-lephone-a60-and-install-android-market-and-gmail/
with winxp
3. gingerbreak (http://www.addictivetips.com/mobile/how-to-root-android-2-3-gingerbread-using-gingerbreak/)
No luck :-( I have attempted the guides many times to confirm..... seems driver problem.
Now within linux I am trying SuperOneClick (http://forum.xda-developers.com/showpost.php?p=8699742&postcount=537) and during the process I have found actually the adb can't communicate with the phone. If I run "adblinux discover" as root it shows as following
Code:
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
And due to this the superoneclick is not progressing.
obviously at phone I have usb debugging on. I have also added the following udev rules found at http://www.idroidproject.org/wiki/ADB
Code:
SUBSYSTEM=="usb" ID_VENDOR_ID=="0bb4", MODE="0666"
SUBSYSTEM=="usb" ID_VENDOR_ID=="18d1", MODE="0666"
SUBSYSTEM=="usb" ID_VENDOR_ID=="05ac", MODE="0666"
but no luck. Could any one kindly show me the way to activate adb so that I can run superoneclick .. Or any other way to root it ....PLEASE
DEBUG within Linux
================
lsusb
Code:
Bus 002 Device 116: ID 2006:0c03
/var/log/messages
Code:
Nov 20 15:38:56 shiva kernel: [320568.881611] usb 2-1.2: new high speed USB device number 117 using ehci_hcd
Nov 20 15:38:56 shiva kernel: [320568.975012] usb 2-1.2: New USB device found, idVendor=2006, idProduct=0c03
Nov 20 15:38:56 shiva kernel: [320568.975019] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 20 15:38:56 shiva kernel: [320568.975025] usb 2-1.2: Product: Mi-350
Nov 20 15:38:56 shiva kernel: [320568.975028] usb 2-1.2: Manufacturer: Spice
Nov 20 15:38:56 shiva kernel: [320568.975032] usb 2-1.2: SerialNumber: 0123456789ABCDEF
Nov 20 15:38:56 shiva kernel: [320568.976814] scsi116 : usb-storage 2-1.2:1.0
Nov 20 15:38:57 shiva kernel: [320569.973037] scsi 116:0:0:0: Direct-Access Spice Mi-350 0100 PQ: 0 ANSI: 2
Nov 20 15:38:57 shiva kernel: [320569.974216] sd 116:0:0:0: Attached scsi generic sg3 type 0
Nov 20 15:38:57 shiva kernel: [320569.977437] sd 116:0:0:0: [sdc] Attached SCSI removable disk
1.Search for unlock root on google.
2.Install it on your PC.
3.Connect your phone to PC while USB debugging is on.
4.Open/run unlock root.
5.It will search the connected device, let it complete.
6.Confirm your phone when the search is complete.
7.Click root and it is done.
Your device is rooted.
Hi,
Will this work on the tf300t:
http://www.amazon.com/Ethernet-Adap...3SQAI9BQY42F6&s=generic&qid=1341110844&sr=1-1
Gesendet von meinem GT-I9000 mit Tapatalk 2
For tf101 and tf201 users the apple one worked. The important thing is the chipset.
Do you have a Link?
Gesendet von meinem GT-I9000 mit Tapatalk 2
I have one that works perfectly and it has a hub included.
here is the name of it.
Encore ENUET-3USB 3-Port USB Hub w/ Ethernet Adapter
sorry can't post links yet
Look: http://www.amazon.com/gp/aw/d/B0036FZJX4
Thats Good to have an USB Hub and a LAN connector.
Do you need a Power connection??
Gesendet von meinem GT-I9000 mit Tapatalk 2
Haven't needed one yet, been using it for school with my usb mouse and it works great.
if you need lan - why not just use Samba with your Wlan?
cheers
Ethernet
I think he want to use ethernet internet connection.
Pity we in Australia cannot buy the one on ebay.
Anybody know of any others?
Hi!
I am trying to connect this cable - D-Link DUB-E100.
That's part of the result of dmesg.
Code:
<6>usb 1-1.2: new high speed USB device number 5 using tegra-ehci
<6>usb 1-1.2: New USB device found, idVendor=2001, idProduct=1a02
<6>usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>usb 1-1.2: Product: DUB-E100
<6>usb 1-1.2: Manufacturer: D-Link
<6>usb 1-1.2: SerialNumber: 9F5B18
No driver in the kernel for this device?
With stock kernel only "oficial" adapters are supported, and some of Asix based chipset (Apple, netlink and others)
With untermensch kernel it also work all devices with Moschip chipset (the most of chinese manufactured adapters). I bought one on ebay and confirmed it works perfectly. It's available on Amazon too:
http://www.amazon.com/USB-2-0-3-Por...d=1350492368&sr=8-1&keywords=usb+ethernet+hub
I have the adapter that the OP is referring to and it works perfect for LAN connections. I have had it a few months and have had no issues with it.
... USB to LAN
ppmeis said:
With stock kernel only "oficial" adapters are supported, and some of Asix based chipset (Apple, netlink and others)
With untermensch kernel it also work all devices with Moschip chipset (the most of chinese manufactured adapters). I bought one on ebay and confirmed it works perfectly. It's available on Amazon too:
Click to expand...
Click to collapse
Hi my friend i buy this adapter
Intellinet usb 2.0 ethernet mini-adapter (524766) i read in the TF700 forum that the stock kernel supposed to support this but when connect the adapter only gets link in my dumb switch but the configuration settings for android does not appear.
display with dmesg was:
<6>[ 236.111532] usb 1-1: reset high speed USB device number 6 using tegra-ehci
<6>[ 236.441807] usb 1-1.2: new high speed USB device number 9 using tegra-ehci
<6>[ 236.478078] usb 1-1.2: New USB device found, idVendor=9710, idProduct=7830
<6>[ 236.478718] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 236.479771] usb 1-1.2: Product: UA0025C
<6>[ 236.480341] usb 1-1.2: Manufacturer: Moschip Semiconductor
<6>[ 236.481486] usb 1-1.2: SerialNumber: 6e000001
and you mention that all devices with untermensch kernel will work.... sorry for this nob question ....but i'm a beginer here.. I have the Clean Rom 2.5 base on stock Jeally Bean for my TF300 and i have this adapter and wish to could use it..
did you know any way that i could make that happend....
and the untermensch kernel i dont know if i could flash it with that rom....
thanks for the help
redfox1985 said:
Hi my friend i buy this adapter
Intellinet usb 2.0 ethernet mini-adapter (524766) i read in the TF700 forum that the stock kernel supposed to support this but when connect the adapter only gets link in my dumb switch but the configuration settings for android does not appear.
display with dmesg was:
<6>[ 236.111532] usb 1-1: reset high speed USB device number 6 using tegra-ehci
<6>[ 236.441807] usb 1-1.2: new high speed USB device number 9 using tegra-ehci
<6>[ 236.478078] usb 1-1.2: New USB device found, idVendor=9710, idProduct=7830
<6>[ 236.478718] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 236.479771] usb 1-1.2: Product: UA0025C
<6>[ 236.480341] usb 1-1.2: Manufacturer: Moschip Semiconductor
<6>[ 236.481486] usb 1-1.2: SerialNumber: 6e000001
and you mention that all devices with untermensch kernel will work.... sorry for this nob question ....but i'm a beginer here.. I have the Clean Rom 2.5 base on stock Jeally Bean for my TF300 and i have this adapter and wish to could use it..
did you know any way that i could make that happend....
and the untermensch kernel i dont know if i could flash it with that rom....
thanks for the help
Click to expand...
Click to collapse
I have been searching all day for a way too, (ihave the link cant post it...new member)Its a site called asix I think thats the driver we need (running same rom) but I have no idea how to install it, tried flashing it in recovery but that didnt work too.
The usb is one of those cheap blue Chinese ones thats why I think its not supported for plug and play.....
Hello,
today i have earned new devices called Snapdragon by Qualcomm Mobile Development Platform MSM 6960 (Liquid 8960 V3.2.1)
When i turn on Devices i have only text:
Code:
Qualcomm UEFI FW Version : 1.30.120615.1130.0008
Platform : LiQUID
Chip Name : APQ8060A
Chip Ver : 4.1
UEFI Interactive Shell v2.0 UEFI v2.31 (Qualcomm Inc., 0x13120615) .
Press ESC to skip startup.nsh or any other key to continue
Anybody have any idea how i can put system (and which) on this ?
Any idea ?
and what you have written on the labels?
I join have a tablet with preloaded windows rt, help
I'd like a bit of help rooting Verykool Fusion SL4500. There's no "development" options in settings, and I tried a bunch of root methods that didn't work yet. My Apple Mac only sees my SG3 on USB, not this, so I don't know what I have to do to get its USB to show up. Any ideas on anything?
Framaroot: Aragorn: Failed (Error #6)
Towelroot v3: "make it ra1n" only results in the button turning orange but nothing else happens except the app crashes.
KingRoot: the app installer doesn't let me hit "Install". When I press "Install" it does not react. (!!)
Info:
USB info: Android:
Product ID: 0xf003
Vendor ID: 0x05c6 (Qualcomm, Inc)
Version: ff.ff
Serial Number: (32 bit hex number)
Speed: Up to 480 Mb/sec
Manufacturer: Android
Location ID: 0x14500000 / 16
Current Available (mA): 500
Current Required (mA): 500
Model number: verykool Fusion SL4500
Processor info: Qualcomm Technologies, Inc MSM8916
Android version: 4.4.4
Kernel version: 3.10.28 2015-02-12
Build number: SL4500_VK_Generic_Dual_SW_1.0
Web site www verykool net/Products/SL4500
(available from Amazon for $100)
how to get in to developer mode
Got to setting > About phone: on the build number tap seven (7) times and you be in developer mode.
Jim
Ulmo said:
I'd like a bit of help rooting Verykool Fusion SL4500. There's no "development" options in settings, and I tried a bunch of root methods that didn't work yet. My Apple Mac only sees my SG3 on USB, not this, so I don't know what I have to do to get its USB to show up. Any ideas on anything?
Framaroot: Aragorn: Failed (Error #6)
Towelroot v3: "make it ra1n" only results in the button turning orange but nothing else happens except the app crashes.
KingRoot: the app installer doesn't let me hit "Install". When I press "Install" it does not react. (!!)
Info:
USB info: Android:
Product ID: 0xf003
Vendor ID: 0x05c6 (Qualcomm, Inc)
Version: ff.ff
Serial Number: (32 bit hex number)
Speed: Up to 480 Mb/sec
Manufacturer: Android
Location ID: 0x14500000 / 16
Current Available (mA): 500
Current Required (mA): 500
Model number: verykool Fusion SL4500
Processor info: Qualcomm Technologies, Inc MSM8916
Android version: 4.4.4
Kernel version: 3.10.28 2015-02-12
Build number: SL4500_VK_Generic_Dual_SW_1.0
Web site www verykool net/Products/SL4500
(available from Amazon for $100)
Click to expand...
Click to collapse
Hi
I have a Inphic i5 android box (SoC AMLogic s805) without bluetooth. I have tried to connect a chinese gamepad ps3 via USB cable (wired).
The problem is that it does not recognize it. Analyzing the output I get this HID:
Device Info
Device Path: /dev/bus/usb/002/008
Device Class: Use class information in the Interface Descriptors (0x0)
Vendor ID: 054c
Vendor Name: Sony Corp.
Product ID: 07d8
Product Name: not in db
Interfaces
Interface #0
Class: Human Interaction Device (0x3)
Endpoint: #0
Address : 2 (000000010)
Number : 2
Direction : Outbound (0x0)
Type : Intrrupt (0x3)
Poll Interval : 10
Max Packet Size: 64
Attributes : 000000011
Endpoint: #1
Address : 129 (10000001)
Number : 1
Direction : Inbound (0x80)
Type : Intrrupt (0x3)
Poll Interval : 10
Max Packet Size: 64
Attributes : 000000011
Can you help me?