hi i want to try to enable widevine level 1 on cyanogen do you think it is possible ?
Code:
D/DrmWidevineDash( 231): OEMCrypto_Initialize: starts! g_qsee_apps_version = 0x13
D/DrmWidevineDash( 231): Service_Initialize: starts!
D/QSEECOMAPI: ( 231): QSEECom_start_app sb_length = 0x19000
D/QSEECOMAPI: ( 231): App is not loaded in QSEE
E/QSEECOMAPI: ( 231): Error::Cannot open the file /vendor/firmware/tzapps.mdt
E/QSEECOMAPI: ( 231): Error::Loading image failed with ret = -1
D/QSEECOMAPI: ( 231): QSEECom_start_app sb_length = 0x19000
D/QSEECOMAPI: ( 231): App is not loaded in QSEE
E/QSEECOMAPI: ( 231): Error::Cannot open the file /system/etc/firmware/tzapps.mdt
E/QSEECOMAPI: ( 231): Error::Loading image failed with ret = -1
D/QSEECOMAPI: ( 231): QSEECom_start_app sb_length = 0x19000
D/QSEECOMAPI: ( 231): App is not loaded in QSEE
E/QSEECOMAPI: ( 231): Error::Cannot open the file /firmware/image/tzapps.mdt
E/QSEECOMAPI: ( 231): Error::Loading image failed with ret = -1
E/DrmWidevineDash( 231): Error: Service_Initialize: Loading tzapp image failed, ret = -1
D/DrmWidevineDash( 231): Service_Initialize: ends! returns -1
E/DrmWidevineDash( 231): service_initialized returned failure
D/DrmWidevineDash( 231): OEMCrypto_Initialize: ends! returns 1
W/WVCdm ( 231): Could not initialize L1. Falling Back to L3.
tzapps.mdt is present on the rom but i don't no why is not load the firmware image
some one have a idea to help me ?
Related
Somehow last night my phone (Galaxy S4 running AOSP 4.4.2) crashed and now it wont reboot. It just sticks on the screen with the four colours animation for ever. I tried deleting the Cache, and Davilik Cache but it has not fixed the problem .. after this is went through the Upgrading Android process for all the apps but then stuck on "Starting Apps" .. so pretty clearly some application is starting and has a problem and so my phone wont boot .. but is there anyway of finding out which application it is?? Im aware I can wipe data and start again but would like to solve the problem without this if its possible. I also tried re-flashing my ROM but it didnt help.
Thanks for any help in advance.
If it helps anybody help me, I plugged my phone into usb while it is stuck in the bootloop and ran
adb logcat *:E .. here is the result
--------- beginning of /dev/log/system
--------- beginning of /dev/log/main
E/DataRouter( 198): USB Interface is open with 0x9
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 1 of 10
E/macloader( 210): CID info file will be created!!!
E/wcnss_service( 221): CAL file not found
E/wcnss_service( 221): Failed to open wcnss device : No such file or directory
E/mm-camera( 211): qcamsvr_start: old_mode = 3f
E/INSTHK ( 249): Checked...
E/PPDaemon( 217): Failed to open the config file!
E/PPDaemon( 217): Panel type: 8
E/rmt_storage( 223): Remote storage service is not supported on mdm target
E/AT_Distributor( 212): Failed to init ATD
E/mm-camera( 211): qcamsvr_load_gesture_lib Error opening gesture library
E/mm-camera( 211): Cannot init Gesture library
E/mm-camera( 211): camera_plugin_create_func: handle = 0xb6c10008, client_open_fn = 0xb6c0d565, destroy_fn = 0xb6c0db99
E/QC-time-services( 220): Daemon:genoff_boot_tod_init: Unable to set TOD at boot up
E/QC-time-services( 220): Daemon: Unable to set TOD at boot up
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/Diag_Lib( 195): Diag_LSM_Init: Failed to open handle to diag driver, error = 13
E/QCNEA ( 214): CnE Standard Version 4.01
E/QCNEA ( 214): CnE Pro Version 1.01
E/QCNEA ( 214): Cne WQE Version 0.1
E/QCNEA ( 214): Cne NSRM Version 1.01
E/Sensorhubs( 207): couldn't find 'ssp_context' input device
E/Sensorhubs( 207): SSPContext: open sensorhub device failed(-1)
E/PRDrmPlugIn( 202): PRDrmPlugin:RDrmPlugin
E/PRDrmPlugInImp( 202): PRDRMPluginAPI::create
E/PRDrmPlugInImp( 202): PRDRMPluginAPI::SetEventHandler
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 2 of 10
E/PRDrmPlugIn( 202): PRDrmPlugin:nGetSupportInfo, uniqueId = 0
E/Sensorhubs( 207): couldn't find 'gesture_sensor' input device
E/MediaPlayerFactory( 203): calling dlopen on FACTORY_LIB
E/MediaPlayerFactory( 203): calling dlsym on pFactoryLib for FACTORY_CREATE_FN
E/MediaPlayerFactory( 203): registering DASH Player factory...
E/QualcommCamera( 203): Qint android::get_number_of_cameras(): E
E/alsa_mixer( 203): Control open failed
E/ ( 203): [ACDB RTC]->rtc init done!->result [0]
E/Diag_Lib( 203): actp_diag_init: call diag init function with B50181DD
E/ ( 203): [ACDB ACPH]->actp diag init done!
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 74
E/ACDB-LOADER( 203): done with conversion, anc config size is 74
E/AndroidRuntime( 201): cannot open customer xml file
E/AndroidRuntime( 201): /system/csc/customer.xml can't open file
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 3 of 10
E/ICD ( 194): There is no file or permission.
E/BootAnimation( 613): Could not open '/sys/devices/w1_bus_master1/w1_master_check_id'
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 4 of 10
E/EmojiFactory_jni( 201): Failed to load libemoji.so: dlopen failed: library "libemoji.so" not found
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 5 of 10
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 6 of 10
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 7 of 10
E/Sensors ( 768): getName gyro_sensor name file open error.
E/GyroSensor( 768): GyroSensor : getName of gyro_sensor failed.
E/TemperatureHumiditySensor( 768): Failed to open send_accuracy sysfs
E/Sensors ( 768): sensors__get_sensors_list gyro_sensor name file open error.
E/MagneticSensor( 768): enable, 122, data_fd = -1
E/GyroSensor( 768): enable, 148, data_fd = -1
E/TemperatureHumiditySensor( 768): enable, 216, data_fd = -1
E/TemperatureHumiditySensor( 768): enable, 216, data_fd = -1
E/Sensors ( 768): sensors__get_sensors_list gyro_sensor name file open error.
E/Sensors ( 768): sensors__get_sensors_list gyro_sensor name file open error.
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 8 of 10
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 9 of 10
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 10 of 10
E/kickstart-qcks( 226): '/dev/mdm' was not found
E/kickstart-qcks( 226): ERROR: Can't bring MDM9K out of reset
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_mixer( 203): Control open failed
E/ ( 203): csd_client_service_init: Invalid rx device 0, setting to handset
E/ ( 203): csd_client_service_init: Invalid tx device 0, setting to handset
E/alsa_ucm( 203): Invalid current verb value: Inactive - -1
E/alsa_ucm( 203): No valid device Speaker found
E/alsa_ucm( 203): Control device not initialized
E/alsa_ucm( 203): Control device not initialized
E/alsa_pcm( 203): cannot open device '/dev/snd/pcmC0D0p', errno 2
E/ALSADevice( 203): open: Failed to initialize ALSA device 'hw:0,0'
E/AudioHardwareALSA( 203): Device open failed
E/QMI_FW ( 203): xport_open: socket creation failed - 1
E/AudioPolicyManagerBase( 203): Not output found for attached devices 00000003
E/AudioPolicyManagerBase( 203): Failed to open primary output
E/AudioPolicyManagerBase( 203): getDeviceForStrategy() speaker device not found for STRATEGY_SONIFICATION
E/AudioPolicyManagerBase( 203): getDeviceForStrategy() speaker device not found for STRATEGY_SONIFICATION
E/Audio_Control_CSC( 203): /system/csc/sales_code.dat ==> cannot open file
E/AudioPolicyService( 203): couldn't init_check the audio policy (No such device)
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init:retry count exceeds limitQMI init failed continuing withoutserver
E/QC-time-services( 220): Daemon: QMI init failed, QMI calls inactive
E/QC-time-services( 220): Daemon: Time-services: Waiting to acceptconnection
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=0
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=18
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=37
E/QMI_FW ( 203): open_lookup_sock_fd: Lookup sock fd creation failed
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=0
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=18
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=37
E/SensorHubManager( 768): JNI: sensorhubs_get_next_module: getSensorHubList: count= 2
E/SensorHubManager( 768): JNI: sensorhubs_get_next_module: getSensorHubList: count= 2
E/SensorHubManager( 768): JNI: sensorhubs_enabledisable: delay= 0
E/EventHub( 768): could not get driver version for /dev/input/mice, Not a typewriter
E/ConnectivityService( 768): Error in networkAttributes - ignoring attempt to define type 17
E/ConnectivityService( 768): Ignoring protectedNetwork 14
E/MobileDataStateTracker( 768): default: Ignoring feature request because could not acquire PhoneService
E/MobileDataStateTracker( 768): default: Could not enable APN type "default"
F/SystemServer( 768): BOOT FAILURE Creating Connectivity Engine Service
F/SystemServer( 768): java.lang.ClassNotFoundException: Didn't find class "com.quicinc.cne.CNE" on path: DexPathList[[],nativeLibraryDirectories=[/vendor/lib, /system/lib]]
F/SystemServer( 768): at dalvik.system.BaseDexClassLoader.findClass(BaseDexClassLoader.java:56)
F/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:497)
F/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:457)
F/SystemServer( 768): at com.android.server.ServerThread.initAndLoop(SystemServer.java:572)
F/SystemServer( 768): at com.android.server.SystemServer.main(SystemServer.java:1263)
F/SystemServer( 768): at java.lang.reflect.Method.invokeNative(Native Method)
F/SystemServer( 768): at java.lang.reflect.Method.invoke(Method.java:515)
F/SystemServer( 768): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:1264)
F/SystemServer( 768): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:1080)
F/SystemServer( 768): at dalvik.system.NativeStart.main(Native Method)
E/SystemServer( 768): Failed to load CNE class
E/SystemServer( 768): java.lang.ClassNotFoundException: Didn't find class "com.quicinc.cne.CNE" on path: DexPathList[[],nativeLibraryDirectories=[/vendor/lib, /system/lib]]
E/SystemServer( 768): at dalvik.system.BaseDexClassLoader.findClass(BaseDexClassLoader.java:56)
E/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:497)
E/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:457)
E/SystemServer( 768): at com.android.server.ServerThread.initAndLoop(SystemServer.java:572)
E/SystemServer( 768): at com.android.server.SystemServer.main(SystemServer.java:1263)
E/SystemServer( 768): at java.lang.reflect.Method.invokeNative(Native Method)
E/SystemServer( 768): at java.lang.reflect.Method.invoke(Method.java:515)
E/SystemServer( 768): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:1264)
E/SystemServer( 768): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:1080)
E/SystemServer( 768): at dalvik.system.NativeStart.main(Native Method)
E/wpa_supplicant( 1981): wpa_driver_nl80211_driver_cmd: failed to issue private commands
E/WifiStateMachine( 768): Unexpected BatchedScanResults :null
E/wpa_supplicant( 1981): wpa_driver_nl80211_driver_cmd: failed to issue private commands
E/ActivityManager( 768): Attempt to launch receivers of broadcast intent Intent { act=android.net.ConnectivityService.action.PKT_CNT_SAMPLE_INTERVAL_ELAPSED flg=0x4 (has extras) } before boot completion
Hello, here is my problem,
I have always ported the miui rom to my thl w200 device.
in the latest builds, after porting it to my phone I get stuck at bootlogo.
I did a logcat but cant really find what causes this.
someone can look at it and help me?
--------- beginning of /dev/log/main
I/Resize ( 86): The size of data already meet the request.
I/Resize ( 86): Partition has been resized,so nothing to do!
D/ADB_SERVICES( 158): install_listener('tcp:5037','*smartsocket*')
D/ADB_SERVICES( 158): adb_main(): pre init_jdwp()
D/ADB_SERVICES( 158): adb_main(): post init_jdwp()
D/ADB_SERVICES( 158): Event loop starting
D/ADB_SERVICES( 158): transport: 0xf67520 init'ing for usb_handle 0xf67498 (sn='')
I/ADB_SERVICES( 158): transport: usb
D/ADB_SERVICES( 158): transport: (null) registered
D/ADB_SERVICES( 158): transport: (null) (16,17) starting
W/ADB_SERVICES( 158): (null): starting transport input thread, reading from fd 17
W/ADB_SERVICES( 158): (null): starting transport output thread on fd 17, SYNC online (2)
D/ADB_SERVICES( 158): recv: SYNC 00000001 00000002 0000
W/ADB_SERVICES( 158): (null): transport SYNC online
E/ccci_mdinit(0)( 121): md_init ver:1.00
E/ccci_mdinit(0)( 120): md_init ver:1.00
I/6620_launcher( 117): open device node succeed.(Node:/dev/stpwmt, fd:3)
I/6620_launcher( 117): keypersist.mtk.wcn.combo.chipid)-value0x6628),chipId:0x6628
I/6620_launcher( 117): index:1, chipId:0x6628
I/6620_launcher( 117): chiId:0x6628
I/6620_launcher( 117): index:1, chipId:0x6628
I/6620_launcher( 117): set chipId(0x6628) to HIF-SDIO module
I/6620_launcher( 117): Info:key:mt6620.defAnt value:mt6620_ant_m3.cfg
I/6620_launcher( 117): Info:key:mt6628.defAnt value:mt6628_ant_m1.cfg
I/6620_launcher( 117): NULL is returned, eighter EOF or error maybe found
I/6620_launcher( 117): close /system/etc/firmware/WMT.cfg succeed
I/6620_launcher( 117): index:1, chipId:0x6628
I/6620_launcher( 117): STP Mode is not set, fetching default mode...
I/6620_launcher( 117): chipId(0x6628), default Mode(1), strlen(gWmtCfgName)(39), wmtCfgFile(/system/etc/firmware//mt6628_ant_m1.cfg)
I/6620_launcher( 117): HifConfig:0x0001, wmtCfgFile:/system/etc/firmware//mt6628_ant_m1.cfg
I/6620_launcher( 117): keyro.build.type)-valueuser)
I/6620_launcher( 117): MCU patch folder path: /system/etc/firmware/
I/6620_launcher( 117): Common Interface: UART mode
I/6620_launcher( 117): MCU patch folder path: /system/etc/firmware/
I/6620_launcher( 117): Common Interface: UART mode
I/6620_launcher( 117): uart name ttyMT2
D/MsensorDaemon( 151): Msensor deamon statr!!!!!!!!!!!!
D/MsensorDaemon( 151): msensor demon start process detect demon name = memsicd3416x
D/MsensorDaemon( 151):
D/MsensorDaemon( 151): msensor demon start process detect demon prop = init.svc.memsicd3416x
D/MsensorDaemon( 151):
D/MsensorDaemon( 151): start_msensor_demon
D/MsensorDaemon( 151): HAVE_LIBC_SYSTEM_PROPERTIES
E/MsensorDaemon( 151): [99] ''
D/permission_check( 145): permission check ver:0.01
D/permission_check( 145): Empty, not decrypt!
D/permission_check( 145): change_md_nvram_attr++
--------- beginning of /dev/log/system
E/POAD ( 155): boot_mode = 0
E/POAD ( 155): update boot reason = 0
D/permission_check( 145): new_ver file exist!!!
D/permission_check( 145): change_md_nvram_attr--0
I/stp_dump( 143): ==>main
I/stp_dump( 143): stp_dump_ctrl_iface_trace_logger_sendto_fd succeed
E/stp_dump( 143): [STP_DBG] family id = 19
I/stp_dump( 143): sending dummy command
I/stp_dump( 143): set sock number to 9
I/stp_dump( 143): addr.sun_path:stp_DIR=/data/misc/stp_dump GROUP=stp
I/stp_dump( 143): Using existing control interface directory.
E/stp_dump( 143): mkdir (/data/misc/stp_dump) succeed
I/stp_dump( 143): ctrl_interface_group=1000 (from group name 'stp')
I/stp_dump( 143): chown (/data/misc/stp_dump) succeed
I/stp_dump( 143): CTRL: chmod[/data/misc/stp_dump] succeed
E/stp_dump( 143): ctrl_iface bind(PF_UNIX) failed: Address already in use
E/stp_dump( 143): ctrl_iface exists, but does not allow connections - assuming it was leftover from forced program termination
D/stp_dump( 143): Successfully replaced leftover ctrl_iface socket '/data/misc/stp_dump/stpd'
I/stp_dump( 143): set sock number to 10
I/stp_dump( 143): stp_dump_ctrl_iface_init succeed.
I/stp_dump( 143): ==>main222
I/busybox ( 114): run-parts: /system/etc/init.d: No such file or directory
D/wlanLoader( 144): checkSupport 0x6628
D/wlanLoader( 144): Match 0x6628
D/wlanLoader( 144): Get the correct chip version mt6628
D/wlanLoader( 144): Get chip Version mt6628.
D/wlanLoader( 144): DRIVER_MODULE_PATH is /system/lib/modules/wlan_mt6628.ko
D/MsensorDaemon( 151): HAVE_LIBC_SYSTEM_PROPERTIES
D/MsensorDaemon( 151): memsicd3416x running
D/MsensorDaemon( 151): Msensor deamon2 statr!!!!!!!!!!!!
D/MsensorDaemon( 151): open demon attr err = No such file or directory
E/stp_dump( 143): table == NULL || table->table == NULL
E/stp_dump( 143): table == NULL || table->table == NULL
D/wlanLoader( 144): Success to insmod the /system/lib/modules/wlan_mt6628.ko
I/thermal_repeater( 154): START+++++++++ 154
I/thermal_repeater( 154): Success to write 154 to /proc/wmt_tm/tm_pid
I/thermal_repeater( 154): Fail to chmod ffffffff
I/thermal_repeater( 154): Enter infinite loop
I/AEE/AED ( 122): Built Jan 30 2013 19:35:15
D/AEE/AED ( 122): ChangeAEEWorkMode: 3
I/AEE/AED ( 122): AED config
I/AEE/AED ( 122): mode '3'
I/AEE/AED ( 122): exp level '1
I/AEE/AED ( 122): dal enable '0'
I/AEE/AED ( 122): db count '20'
I/AEE/AED ( 122): db storage '1'
I/AEE/AED ( 122): SMP Info => 1
I/MobileLogD( 123): [void change_permission()] set mobile_log_d is in root user, adjust caps for its thread
I/MobileLogD( 123): mobilelog start after boot, mode:0
D/MobileLogD/cache( 123): init cache configure items....
D/MobileLogD/cache( 123): value of ro.build.type:user.
I/installd( 140): installd firing up
D/PQ ( 130): PQ init start...
D/PQ ( 130): PQ test...
I/ ( 137): ServiceManager: 0x41661698
D/PQ ( 130): PQ init end !
E/AEE/LIBAEE( 122): Can't remove file /sdcard/mtklog/aee_exp/temp: No such file or directory
E/AEE/LIBAEE( 122): Can't remove file /data/aee_exp/temp: No such file or directory
V/AEE/AED ( 122): ETB buffer length = 512
I/AEE/AED ( 122): wdt_status = 2, fiq_step=0
I/AEE/AED ( 122): reboot_reason = 0
V/AEE/AED ( 122): ETM start
D/installd( 140): LBE is enabled, starting...
D/NVRAM ( 152): NvRAMAgent created
E/NVRAM ( 152): Haman, serviceManager work well
D/NVRAM ( 152): NvRAMAgent Service is now ready
I/DPFD ( 149): [DPFD] main start ...
I/DPFD ( 149): [DPFD] set priority to RR:268435540
I/DPFD ( 149): [int adjustPriority()] set dpfd is in root user, adjust caps for its thread
D/DPFD ( 149): [DPFD] Wait Request.....
I/DMAgent ( 147): DMAgent created
I/DMAgent ( 147): [DMAgent]register OK.
D/DMAgent ( 147): DMAgent Service is now ready
D/MobileLogD( 123): write "mobilelog start after boot, mode:0" to mblog
E/installd( 140): Failed to load liblbesec.so
I/installd( 140): add service shelld success!
W/installd( 140): service start entry 'shelld', flag :0
W/installd( 140): starting 'shelld'
E/ccci_fsd(0)( 118): md_fsd Ver:v1.00
I/Hald ( 133): Hald 1.1011 starting
D/ccci_fsd(1)( 118): /dev/ccci_fs is opend(600).
D/ccci_fsd(1)( 118): Check OTP...
D/Hald ( 133): Create ResetManager
D/Hald ( 133): Size of initial message: 6
D/Hald ( 133): [MTK_WIFI] family id = 20
D/Hald ( 133): Reset Manager Prepare Dummy command
D/Hald ( 133): Reset Manager Send Command for binding
D/Hald ( 133): Start ResetManager
E/ccci_fsd(0)( 119): md_fsd Ver:v1.00
E/ccci_fsd(2)( 119): /dev/ccci2_fs is not enabled(2).
D/MobileLogD/cache( 123): config autostart=0 same as current value
D/MobileLogD/cache( 123): config logpath=/mnt/sdcard same as current value
D/MobileLogD/cache( 123): config logsize=300 same as current value
D/MobileLogD/cache( 123): config AndroidLog=1 same as current value
D/MobileLogD/cache( 123): config KernelLog=1 same as current value
D/MobileLogD/cache( 123): config BTLog=1 same as current value
D/MobileLogD/cache( 123): config BTLog=1 same as current value
E/MobileLogD/cache( 123): cant get true log path through property
E/MobileLogD/cache( 123): true path is /mnt/sdcard
D/MobileLogD( 123): create local socket server success
D/Vold ( 116): Check whether nvram restore ready!
D/NVRAM ( 128): g_i4CFG_File_Count: 25
D/NVRAM ( 128): NVM_Init Max Lid: 43
D/NVRAM ( 128): Total nvram Lid number is 43
I/Netd ( 125): Netd 1.0 starting
W/InterfaceController( 125): Warning (Cannot load library: load_library(linker.cpp:745): library "/system/lib/libnetcmdiface.so" not found) while opening the net interface command library
D/agps ( 142): [agps] WARNING: [Main] mtk_agpsd is running ver=0.46
D/agps ( 142): [agps] WARNING: [Main] mkdir failure for /data/agps_supl/log reason=[File exists]
D/MtkAgpsNative( 142): SuplRawLog.bEnable:0
D/MtkAgpsNative( 142): SuplRawLog.szPath:/sdcard
D/MtkAgpsNative( 142): SuplRawLog.szFile:agps_raw.log
D/MtkAgpsNative( 142): SuplSslLog.bEnable:0
D/MtkAgpsNative( 142): SuplSslLog.szPath:/sdcard
D/MtkAgpsNative( 142): SuplSslLog.szFile:agps_ssl.log
I/MtkAgpsNative( 142): Enter up_int_init
I/MtkAgpsNative( 142): Enter mtk_agps_up_init
D/MtkAgpsNative( 142): FS_CreateDir: /data/agps_supl
W/MtkAgpsNative( 142): -> errno(EEXIST) => dir already exists
D/MtkAgpsNative( 142): ############ mtk_agps_up_init --> agps_disable_enalbe_times = 1 ############
Click to expand...
Click to collapse
HI,
I'm developing my first CM for the device I use. It's a phone sporting a Snapdragon 410 (msm8916)
I can get the phone to connect to the network. Here is a part of the radio log :
D/RILD ( 0): **RIL Daemon Started**
D/RILD ( 0): **RILd param count=1**
D/RILD ( 266): RIL_Init argc = 5 clientId = 0
E/RILQ ( 266): log to /data/misc/radio/ril_log for QCRIL logging is not enabled
E/RILQ ( 266): (0/266): RIL[0][rild] qmi_ril_peripheral_mng_init: Failed to register for modem
I/RILQ ( 266): (0/266):RIL[0][rild] qmi_ril_qmi_client_pre_initialization_acquire: entry
I/RILQ ( 266): (0/266):RIL[0][rild] qmi_ril_qmi_client_pre_initialization_acquire: exit
D/RILD ( 266): RIL_Init rilInit completed
E/RILC ( 266): RIL_register: RIL version 11
D/RILD ( 266): RIL_Init RIL_register completed
D/RILD ( 266): RIL_Init starting sleep loop
I/RILQ ( 266): (0/266):RIL[0][main] qmi_ril_qmi_client_pre_initialization_release: entry
I/RILQ ( 266): (0/266):RIL[0][main] qmi_ril_qmi_client_pre_initialization_release: exit
E/RILQ ( 266): (0/266): RIL[0][main] qcril_qmi_init_core_client_handles: qcril_qmi_presence_init returned failure(-3)
E/RILQ ( 266): (0/266): RIL[0][main] qcril_qmi_nas_init: QCRIL_OPERATOR_NAME is persist.env.spec, property_name is persist.env.spec. Failed to get operator name
E/RILQ ( 266): (0/266): RIL[0] qcril_qmi_pdc_get_selected_config_ind_hdlr: no selected config id
E/RILQ ( 266): (0/266): RIL[0] qcril_qmi_pdc_get_selected_config_ind_hdlr: unable to find reqlist by event QCRIL_EVT_HOOK_QUERY_MODEM_TEST_MODE
I/RILQ ( 266): (0/266):RIL[0][main] qcril_arb_set_dsd_sys_status: old_pref_data 0 - new_data_pref 0
I/RILQ ( 266): (0/266):RIL[0][main] qcril_arb_set_dsd_sys_status: preferred dsd_sys_status nw=0x0, rat_value=0x0, so_mask=0x0000000000000800
I/RILQ ( 266): (0/266):RIL[0][main] qcril_arb_set_dsd_sys_status: preferred 1 - dsd_sys_status nw=0x0, rat_value=0x0, so_mask=0x0000000000000800
I/RILQ ( 266): (0/266):RIL[0][main] qcril_arb_set_dsd_sys_status: is_wwan_available 0
E/RILQ ( 266): (0/266): RIL[0][event] get_ecc_property_name: ecc list name : ril.ecclist.
E/RILQ ( 266): (0/266): RIL[0][event] qcril_uim_process_status_change_ind: card status invalid for slot 0x0
E/RILQ ( 266): (0/266): RIL[0][main] qcril_sms_perform_transport_layer_info_initialization: error while retrieving transport layer reg info
E/RILQ ( 266): (0/266): RIL[0][event] get_ecc_property_name: ecc list name : ril.ecclist.
E/RILQ ( 266): (0/266): RIL[0][event] qcril_uim_update_pbm_card_event: PBM_HANDLE_CARD 397313 processing Failed!
E/RILQ ( 266): (0/266): RIL[0][event] qcril_qmi_nas_update_iccid: Error reading iccid for slot 0
E/RILQ ( 266): (0/266): RIL[0][event] get_ecc_property_name: ecc list name : ril.ecclist.
Click to expand...
Click to collapse
Here is the source :
Kernel : https://github.com/supercairos/android_kernel_doro_msm8916_2
Device : https://github.com/supercairos/android_device_doro_hero
Vendor : https://github.com/supercairos/android_vendor_doro_hero
I would be glad If you could help me
Any help :'(
Hello! I'm working on RIL porting too. I'm working on MSM8974AC. What is SELinux status on your Android? In my case I suppose rild does not start because of security
does anyone have a custom recovery?
How to root the doro liberto 825?
recovery
Supercairos said:
Any help :'(
Click to expand...
Click to collapse
can you put me the recovery file please
If anyone wants to follow along, you can read here: http://forum.xda-developers.com/showthread.php?t=3259281
Essentially I'm trying to compile CM 12.1 for the LG G Stylo and it works quite well. Video recording is the last thing not working and I'm just reaching out to see if anyone is familiar with what may be wrong. Here's the relevant lines of the adb logcat:
E/QCamera2HWI( 298): getParameters() mbLowluminanceCondition = 0, mbLowluminanceConditionForVideo = 0, mbBacklightCondition = 0
E/QCamera2HWI( 298): getParameters() Flash is not firing !!!
E/QCameraStateMachine( 298): stateMachine : m_state [2], evt [8]
E/QCameraStateMachine( 298): stateMachine : m_state [2], evt [13]
E/QCameraStateMachine( 298): stateMachine : m_state [2], evt [13]
I/ExtendedUtils( 298): Invalid HFR rate specified : 0
I/ExtendedUtils( 298): Invalid HSR rate specified : 0
W/ExtendedUtils( 298): Invalid HFR rate specified
D/MediaCodecSource( 298): bitrate:12000000, samplerate:0, channels:0
I/OMX-VENC( 298): Component_init : OMX.qcom.video.encoder.avc : return = 0x0
E/OMX-VENC( 298): set_parameter: metamode is valid for input port only
W/OMXNodeInstance( 298): [77:qcom.encoder.avc] component does not support metadata mode; using fallback
E/ACodec ( 298): [OMX.qcom.video.encoder.avc] storeMetaDataInBuffers (output) failed w/ err -1010
W/ACodec ( 298): do not know color format 0x7fa30c04 = 2141391876
W/ACodec ( 298): do not know color format 0x7f000789 = 2130708361
E/ACodec ( 298): [OMX.qcom.video.encoder.avc] does not support color format 39
E/ACodec ( 298): [OMX.qcom.video.encoder.avc] configureCodec returning error -2147483648
E/ACodec ( 298): [OMX.qcom.video.encoder.avc] configureCodec returning error -2147483648
E/ACodec ( 298): signalError(omxError 0x80001001, internalError -2147483648)
E/MediaCodec( 298): Codec reported err 0x80001001, actionCode 0, while in state 3
E/MediaCodec( 298): configure failed with err 0x80001001, resetting...
I/OMX-VENC( 298): Component Deinit
D/mm-camera( 305): cpp_module_handle_stream_crop_event:785 frame id 42 stream_crop.x=0, stream_crop.y=0, stream_crop.dx=1280, stream_crop.dy=720, width 0 height 0 identity=0x20002
I/OMX-VENC( 298): Component_init : OMX.qcom.video.encoder.avc : return = 0x0
I/OMX-VENC( 298): Component Deinit
E/StagefrightRecorder( 298): Failed to create video encoder
D/CameraSource( 298): reset: E
W/CameraClient( 298): attempt to use a locked camera from a different process (old pid 298, new pid 22939)
E/QCameraStateMachine( 298): stateMachine : m_state [2], evt [16]
D/CameraSource( 298): reset: X
E/MediaRecorder(22939): start failed: -2147483648
E/CAM_VideoModule(22939): Could not start media recorder.
E/CAM_VideoModule(22939): java.lang.RuntimeException: start failed.
E/CAM_VideoModule(22939): at android.media.MediaRecorder.start(Native Method)
E/CAM_VideoModule(22939): at com.android.camera.VideoModule$11.onStorageUpdateDone(VideoModule.java:1388)
E/CAM_VideoModule(22939): at com.android.camera.CameraActivity$18.onPostExecute(CameraActivity.java:2164)
E/CAM_VideoModule(22939): at com.android.camera.CameraActivity$18.onPostExecute(CameraActivity.java:2149)
I'm thinking it's really related to this commit being close, but not sure: https://github.com/TeamRegular/android_frameworks_av/commit/d5de1e7b636ba5673a2b20be8685287ff60fb487
Did some Googling.
W/ACodec ( 307): do not know color format 0x7fa30c04 = 2141391876
http://alumnus.caltech.edu/~heirich/styled-6/index.html
COLOR_QCOM_FormatYUV420SemiPlanar32m
W/ACodec ( 307): do not know color format 0x7f000789 = 2130708361
https://lists.freedesktop.org/archiv...er/043721.html
OMX_COLOR_FormatAndroidOpaque
Thoughts?
Hi there!
Im trying to build Touchwiz Lollipop stock kernel with 4.9+ toolchain for my Samsung Galaxy J5 (2015), but it seems that it doesnt work. The phone gets stuck at phone`s logo, it is not even reaching the bootanimation.
It happened same when i tried to build CM kernel with 4.9+ toolchain.
The toolchain version im using is Linaro 4.9 by Cristopher. I also tried UBER 4.9 and some others, but still no luck.
On Marshmallow it is working fine, unlike Lollipop.
Here is a logcat: MEDIAFIRE / PASTEBIN.
Here is the stock kernel source: GITHUB.
And i think this is the problem, which is seems to loop:
Code:
E/QSEECOMAPI: ( 1252): Error::ioctl call query if app is loaded failed with ret = -1, errno = 22
D/QSEECOMAPI: ( 1252): QSEECom_get_handle sb_length = 0x2000
W/Atfwd_Sendcmd( 301): AtCmdFwd service not published, waiting... retryCnt : 5
I/ServiceManager( 930): Waiting for service SurfaceFlinger...
E/QSEECOMAPI: ( 1252): Error::ioctl call query if app is loaded failed with ret = -1, errno = 22
E/QCOMKeyMaster( 1252): Loading keymaster app /firmware/image keymaste failied with ret -6
E/keystore( 1252): could not open keymaster device in keystore (Operation not permitted)
E/keystore( 1252): keystore keymaster could not be initialized; exiting
There is also this:
Code:
E/QSEECOMAPI: ( 444): Error::Load image request failed ret = -1, errno = 512
E/QSEECOMAPI: ( 444): Error::Loading image failed with ret = -1
D/QSEECOMAPI: ( 444): QSEECom_load_external_elf
E/QSEECOMAPI: ( 444): Error::Cannot open the file /system/etc/firmware/tbase.mdt
E/QSEECOMAPI: ( 444): Error::Loading image failed with ret = -1
D/QSEECOMAPI: ( 444): QSEECom_load_external_elf
E/QSEECOMAPI: ( 444): Error::Cannot open the file /firmware/image/mc_v2.mdt
E/QSEECOMAPI: ( 444): Error::Loading image failed with ret = -1
D/QSEECOMAPI: ( 444): QSEECom_load_external_elf
E/QSEECOMAPI: ( 444): Error::Cannot open the file /system/etc/firmware/mc_v2.mdt
E/QSEECOMAPI: ( 444): Error::Loading image failed with ret = -1
D/QSEECOMAPI: ( 444): QSEECom_load_external_elf
E/QSEECOMAPI: ( 444): Error::Cannot open the file /firmware/image/mobicore12.mdt
E/QSEECOMAPI: ( 444): Error::Loading image failed with ret = -1
D/QSEECOMAPI: ( 444): QSEECom_load_external_elf
E/QSEECOMAPI: ( 444): Error::Cannot open the file /system/etc/firmware/mobicore12.mdt
E/QSEECOMAPI: ( 444): Error::Loading image failed with ret = -1
D/QSEECOMAPI: ( 444): QSEECom_load_external_elf
E/QSEECOMAPI: ( 444): Error::Cannot open the file /firmware/image/mobicore.mdt
E/QSEECOMAPI: ( 444): Error::Loading image failed with ret = -1
Also:
Code:
E/Adreno-GSL( 252): <ioctl_kgsl_driver_entry:485>: open(/dev/kgsl-3d0) failed: errno 12. Out of memory
E/Adreno-EGL( 252): <egliInitState:676>: gsl library open failure
W/Adreno-EGL( 252): <qeglDrvAPI_eglInitialize:375>: EGL_NOT_INITIALIZED
After a google search, i have understood that QSEECOM is related to encryption, but im not even using that.
Do you have any idea or tips?
Thank you!
Robert.
Hey. Have same issue on my Galaxy A3 (qseecom issue). How to fix?
vl_w said:
Hey. Have same issue on my Galaxy A3 (qseecom issue). How to fix?
Click to expand...
Click to collapse
No idea... I couldnt find anything and gave up on it.
I would like to know the solution if you manage to solve the problem...
PS: By the way, when you post in some thread, quote the post or mention the user so he gets notification.
#Henkate said:
No idea... I couldnt find anything and gave up on it.
I would like to know the solution if you manage to solve the problem...
PS: By the way, when you post in some thread, quote the post or mention the user so he gets notification.
Click to expand...
Click to collapse
4.8 - working
4.9 - phone stay on boot-animation... Logs same that in 1st post.
Google search not find solution...
I think easier will move drivers to CAF latest kernel and use it w/o any bugs