Related
Hey Guys I am really impressed about the device named goophone but in real according to the stock launcher it is a kuphone.
So first i can not image who this price is possible but good i accept
for only 70€ including dhl and some cases
So as second some information about this device:
Specs according to Shop: (dhgate)
Model i5C
Band 2G: GSM 850/900/1800/1900MHz
Sim Card Single SIM, Single standby (Micro SIM Card)
Shell Material Plastic
OS Android 4.2
CPU MTK6572, Cortex A7 dual core, 1.2GHz
ROM 4GB
RAM 512MB
Display Size 4.0 Inch
Type TFT, Capacitive touch screen
Resolution 800 x 480 pixels
FM Radio Yes, earphone needed
Earphone Port 3.5mm
Card Extend Support TF card up to 64GB extended
Camera/Picture Resolution Dual Cameras, front camera 2.0MP, back camera 2.0MP with flashlight, up to 1600 ×1200 pixels resolution
GPS Yes
WIFI Yes, 802.11 b/g/n
Bluetooth Bluetooth 2.0
Dimensions 124 x 60 x 8.9 mm
Net Weight(Including battery) 117g
So why i am creating a new thread ?
I observed that there are some bugs and the launcher is so slow and not really i0S7
I also noticed that some other i5c clones have better launcher, so possible to port some systemapps ?
I am not a developer but i can find some recouces for the phone
I also can upload my current rom( but how )
So if you have questions or have the same phone please support his thread for any roms :
You know if we dont care for this noone will do , and for this price, a softwaresupport from manufactor, it is a prank /fool
Sorry for my not ideomatic english , i am german
So stay unhurt and be happy ^^
KiPhone , GooPhone ! KuPhone
Hi ,i own a Goophone i5c , but i thing there is more a Kiphone i5c 2g.
Anyone of you know how to change the stock launcher and set it as default ? i download a few launcher but nothing i cant set them as default launcher ! i tray even a few app like home switcher and other but nothing seem to work , now im stuck with the stock launcher KuLauncher or something like this , but this launcher is very laggy .
Thank You!
Hello I have bought a goophone i5C or a kiphone i5C
apple logo at back (seems painted)
MTK6572/512M of RAM/ photo 2MP back
come with a rom which is a mix of IOS7 and IOS6
when I try a root method on reboot It Bricked so I need a dump or the original rom to flash it under SP Flash Tool
I have tried some Flash with SP Flash Tools with some device with mtk6572 with the same spec (MTK6572 1Ghz, 512 Ram, 4G Rom, graphic Chipset Mali 400MP, ...)
SP Flash Tool work but I have a black screen with a sound with start ...
If someone can give me a dump of your goophone i5C - Kiphone i5C It will be great
there is a tuto how you can do it
http://www.needrom.com/tutorial-backup-rom-with-mtkdroidtools/
Clean rom would be great
creasqui said:
So if you have questions or have the same phone please support his thread for any roms :
Click to expand...
Click to collapse
Great initiative, I received mine yesterday (gadgetdealer phone 5c-> same specs) I already lost a whole evening with mtk droid and sp flash tools. So far I managed just to make a dump of the current rom and noticed the kulauncher apk in there besides other non wanted apk's. But none of any threads is very clear of procedures and don't want to brick it.
For root: framaroot works (select supersu). Googlecalendarsyncadapter.apk 4.2.2 was required to get de calendar working with Google. And i had do update youtube manually to get it playing videos.
Update: I tried to flash it with the Goophone i5c rom you can find in several other threads. I am not really sure if it is compatible but so far I haven't been able to start the actual flashing... it seems it cannot find the device. Already tried by putting the phone in bootloader mode... no luck (but perhaps it saved me from a brick phone). Does anybody found a way to get a better notification bar that shows icons for messages like whatsapp, gmail,play store... ? I already installed the SystemUI.apk from Goophone i5c.. it's compatible but does not change anything.
Sup guys
I just received mine one day ago and I noticed that is going veeery lagy. I just started to fight with it. If I make any progress, I'll share my results with you. Btw This thread is a great idea!!!
Regards
Hello to everybody,
I have received one phone as described (bought on DHgate).
I have root it with farmaroot: ok.
But, I can not change the launcher, I have the launcher kuLauncher.apk. I have tried with different apps: home switch, home manager, ... but any of them can erase kuLauncher as the home launcher.
Does anyone reached to change it?
I´m in the same situation, I have a KUPHONE but this model includes GPS and 3G (WCDMA - 2100 MHz). The stock ROM has several mistakes and it is very laggy. Now I have added a problem after testing 2 different SIMs: I can´t start up my smartphone with a SIM because after enter the correct PIN, the screen gets frozen and I can´t access to the system. Without SIM it works OK...
I rooted it without problems in order to make work the GPS, but I was not able to make work the 3G (I had selected WCDMA in engineer mode and It did not work) .
There is no info about this phone on internet, the codes of Goophone do not work, and I am reading that the ROMs do not work neither...
Please I need a solution! A ROM that works well on this device.
Thanks a lot in advance, :good:
I have this phone as well and would love to put a new rom on it or change the launcher. Any progress on this? I will say there are menus when holding the volume buttons down and the power button. But that's mainly recovery and some add on side loading stuff. Then there's another menu but it's in full Japanese and I can't make any of it out.
Hi guys, I recently bought a GooPhone i5C, rooted it fine with VRoot, tried to update the ROM over the weekend, and ended up bricking my device.
I had taken a backup of my GooPhone at work, and also at home. I tried restoring from a stock KuPhone ROM, but this just left my phone on the Apple logo (had to take the phone apart to get to the little button near the power switch that kills power to the phone). Once back at work on Monday morning however, I restored (loaded the scatter file then hit Download), and my phone started working again.
So in short, I have uploaded my backup if anyone wants it, although you may have to use MtkDroidTools to 'prepare' the files for flash, and then use the scatter file that this creates. I pretty much just registered to post this, so I can't post the link to the backup just yet (PM me or something?).
help! i deleted kulauncher...
ChaosEn3 said:
Hi guys, I recently bought a GooPhone i5C, rooted it fine with VRoot, tried to update the ROM over the weekend, and ended up bricking my device.
I had taken a backup of my GooPhone at work, and also at home. I tried restoring from a stock KuPhone ROM, but this just left my phone on the Apple logo (had to take the phone apart to get to the little button near the power switch that kills power to the phone). Once back at work on Monday morning however, I restored (loaded the scatter file then hit Download), and my phone started working again.
So in short, I have uploaded my backup if anyone wants it, although you may have to use MtkDroidTools to 'prepare' the files for flash, and then use the scatter file that this creates. I pretty much just registered to post this, so I can't post the link to the backup just yet (PM me or something?).
Click to expand...
Click to collapse
please can someone help me i deleted my kulauncher and now it wont start up again it just keeps showing the boot up logo
i cant reach it with usb cause it wont show anything please help me..
kuLauncher
angularpainzzr said:
please can someone help me i deleted my kulauncher and now it wont start up again it just keeps showing the boot up logo
i cant reach it with usb cause it wont show anything please help me..
Click to expand...
Click to collapse
MascioSpam94 said:
Hi guys i deleted the kuLauncher.apk and now the phone bootloop on Apple logo.
I've found that we can use adb when the phone boot in factory mode but i can't find the kulauncher.apk file on the internet.
The phone is rooted but i can't have root shell via adb.
Days ago i had a backup of the rom whit MTK tool but if i try to flash it whit SP_flash tool it return me error 8038.
Anyone can help me?
Edit: the phone came from dhgate, if you wait (bad internet connection) a week i can upload my backup for you.
Ps: mine doesn't have the external sd-card installed but near the battery there is a free micro-sd card slot
Sent from my Galaxy Note II using xda app-developers app
Click to expand...
Click to collapse
Here you go
PS. Tell me if you need the .odex file aswell
PPS. I'm working my way throught the rom to find a solution for changing the stock launcher (iLauncher is sooo much smoother on the device) It's just the launcher thats laggy the phone itself is pretty smooth
rom kuphone i5c
i need rom kuphone i5c
need help
I also have same phone, mistakenly without taking its rom backup i deleted some system files,
now my mobile stop at booting - just adroid logo apprear (not goto main screen)
I cant do any thing with it because usb debugging is also off, can any one provide me its original rom, i will be very thankful to him plus i will pay him too.
waiting please reply
Clean rom
In my quest for a clean rom i came on this one: needrom.com/mobile/ px-c5s5 . Any chances it would work on our devices? Or could it help to mix up with our original rom... Just a thought.
My biggest frustrations with this phone.
Hi, I also bought this phone (for my daughter with her money) without knowing what it was. I believe it's a kuPhone due to a folder 'Kustore' on the device and the microphone hole which is very close to the left bottom screw and further away from the audio jack than on real GooPhone.
Anyway, this phone can be bought very cheap (65eur, free shipping ) and performs well.
However I see a general problem with signal reception:
Wifi: have to be in very close range to the router, about 5m maximum.
3G: rather slow, speed test reporting max. 1Mbps.
GPS: slow locking (several minutes) and not very precise, but still usable.
FM: worse than my other devices inside the house.
Other remarks:
Audio jack only fits 3 pin headphones, 4 pins with microphone do not work well enough to be usable (low volume, shallow sound).
Camera is only 2 megapixel and show green shading under artificial light and some angles. LED flash very weak, does not help.
Microphone mute is activated accidentally when calling (by your cheek pressing the screen at the mute icon, proximity sensor does not seem to work as expected.
When you go to recent call, the caller app crashes.
512 MB memory seems to fill easily, phone blocks and need to cold boot by pressing HOME+POWER buttons together for 10 seconds
Apart from these I do not see any of the problems mentioned in this forum, UI is response and working very well.
I'm prepared to share my ROM if this is of any use to someone, but he has to explain me how. I never did such a thing.
If anyone can help to improve signal reception, welcome!
Hi guys,
I bought a similar phone but I don't know if is agophone or a kuphone.
There is any way to understand what I bought?
There is a way to change the recovery boot in English, now is in Chinese and is not easy to manage
w1r3d said:
I´m in the same situation, I have a KUPHONE but this model includes GPS and 3G (WCDMA - 2100 MHz). The stock ROM has several mistakes and it is very laggy. Now I have added a problem after testing 2 different SIMs: I can´t start up my smartphone with a SIM because after enter the correct PIN, the screen gets frozen and I can´t access to the system. Without SIM it works OK...
I rooted it without problems in order to make work the GPS, but I was not able to make work the 3G (I had selected WCDMA in engineer mode and It did not work) .
There is no info about this phone on internet, the codes of Goophone do not work, and I am reading that the ROMs do not work neither...
Please I need a solution! A ROM that works well on this device.
Thanks a lot in advance, :good:
Click to expand...
Click to collapse
I have the same problem??? any fix?
DonSaffadu said:
I have the same problem??? any fix?
Click to expand...
Click to collapse
hi guys I solve this problem by setting my date and time, and the phone work fine now!
"I can´t start up my smartphone with a SIM because after enter the correct PIN, the screen gets frozen and I can´t access to the system. Without SIM it works OK..."
I've seen this on my phone too, but it's been a while ago and I was able to fix it. It's working since. I don't remember what I did to fix it, but it was not something difficult to do, so don't despair and try a few things.
bootloader
Anyone succeed to flash a boot loader on the kuphone?
Guys maybe you can help me, my phone is behaving very strange. It is a Tianhe H920+ with 4gb ROM, identical with Mlais MX58 Pro, Auxus Nuclea N1 and others.
Roms for Auxus Nuclea N1 are working perfectly, but, first of all i have problems with the rear camera, i am not getting any error messages, but just only the front camera is working and the switch camera option is missing, after i install some third party camera app it freezes.
Phone was suited with Tianhe ROM, build march 2014, for sure i made backup. What i have found out, when i flash the original BOOT.IMG, camera works fine, but the old kernel will be installed. I have unpacked it, checked also init, init.project files, they are totally the same, no change there, just the Zimage differs / Kernel.
All works fine but i have the old known wake up bug, i must remove the battery and start the phone again. I was searching everywhere, but i couldnt find any fix for it. I know flash firmware, but like i already mentioned rear camera is not working with other kernels, all other functions are ok. Is there any possible solution? Framework fix or something please?
Till now i have tried almost 10-15 roms, from MX58 Pro, Star, Tianhe, but non of them is suited with a kernel with working rear camera :crying:. Thank you very much.
Heyy delltech1.. I've also facing similar issue...have you found any solution to your problem?
Tianhe H920+ Wake up issue
delltech1 said:
All works fine but i have the old known wake up bug, i must remove the battery and start the phone again. I was searching everywhere, but i couldnt find any fix for it. I know flash firmware
Click to expand...
Click to collapse
Hello DellTech1.
I am facing the same issue with the pnone not waking up after it has gone to deep sleep.
I found out, that it only happens, when WLAN (WIFI) is switched on.
(For tests I had no SIM installed and the phone was reset to factory setup)
When WIFI is switched off it starts up as it should.
Could this issue be related to baseband?
Do you have more informations now?
Additional infos:
It showed, that the wakeup issue occured, when the phone was logged into a Network with WPA2 security.
Because I did not believe this, I did trials on 3 different networks with 3 different routers.
In each case, the phone did not wake up, if WLAN was active and the security settings in the router have been WAP2.
If I changed the settings in the routers to WPA, wake up was fine.
Anyway: an active WLAN connection (either WPA2 or WPA) does not allow the phone to go into Deep Sleep.
(according to CPU SPY at WPA, and my fingers touching the warm back of the phone with WPA2)
Tianhe
Eleichstetten said:
Hello DellTech1.
I am facing the same issue with the pnone not waking up after it has gone to deep sleep.
I found out, that it only happens, when WLAN (WIFI) is switched on.
(For tests I had no SIM installed and the phone was reset to factory setup)
When WIFI is switched off it starts up as it should.
Could this issue be related to baseband?
Do you have more informations now?
Additional infos:
It showed, that the wakeup issue occured, when the phone was logged into a Network with WPA2 security.
Because I did not believe this, I did trials on 3 different networks with 3 different routers.
In each case, the phone did not wake up, if WLAN was active and the security settings in the router have been WAP2.
If I changed the settings in the routers to WPA, wake up was fine.
Anyway: an active WLAN connection (either WPA2 or WPA) does not allow the phone to go into Deep Sleep.
(according to CPU SPY at WPA, and my fingers touching the warm back of the phone with WPA2)
Click to expand...
Click to collapse
Hi,
i have flashed the "new rom" from pandawillforum. But be carefull, after flashing i wasnt able to start the phone, it softbricked the phone, but i was able to unbrick it. Before you will flash it, take the PRELOADER file from a good known working rom and replace it. Then try to flash it, it will work now.
I have used the phone without the simcard, Wifi was enabled, Gmail synchronization also, i have used the phone for about 5 days, wakeup issue didnt reappeared. Camera is working also. Just search in the forum for H920 and you will find many topics, but i can also post the link here:
4GB version:
http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool
8GB version:
http://www.pandawillforum.com/soft/12J36_S131WT_H920+_8P64_20140329_JB2V1.2.V02.MP.EN.rar
Like i said, use a good working preloader, you can take it also from an older ROM, doesnt matter.
delltech1 said:
Before you will flash it, take the PRELOADER file from a good known working rom and replace it.
Click to expand...
Click to collapse
Could you recommend a good preloader?
Tianhe
Eleichstetten said:
Could you recommend a good preloader?
Click to expand...
Click to collapse
Yes you can use one from this ROM, i was using it everytime:
http://www.needrom.com/mobile/tianhe-star-h920-2/
Camera still not working
delltech1 said:
Yes you can use one from this ROM, i was using it everytime:
http://www.needrom.com/mobile/tianhe-star-h920-2/
Click to expand...
Click to collapse
I have tryed all roms from needrom and pandavile..nothing.
Now I tried the ROM that was offered in the Pandawill Forum for 8GB Version.
This ROM does include a working preloader (maybe has been changed?)
Anyway, when I flash this ROM, it works, but problems persist.
No change.
CWM 8gb ver. ROM
HI guys, Please could some one upload the 8GB rom flashable with CWM recovery I can not do it with flashtools my usb conenctor is damaged...
PLEASE HELP and save my ass I am starting to be despaired with this phone
THANK YOU for any support and have a nice day
Modified version of Note 3 yasuu ROM.
Just for the case that someone do not know how to replace boot.img (kernel 2014) and replace camera drivers I am uploading modified version of Note 3 yasuu ROM.
No flickering screen,No back camera bug or green camera,No unlock freez yet.
Only bad thing is battery usage, maybe because my USB connector is damaged.I do not know try it out and share your results about the baterry please.
LINK (CWM zip file) :
mediafire.com/download/v3n65fltmwka52z/ROM_NOTE3_Kernel_2014_H920+.+Cam.Drivers.HanyxX.zip
Gave it a try.
Installation did work, but I missed keyboard.
Did install keyboard from APK.
Then tried to root. Framaroot said "ok", but Superuser did not work.
Tried to install Superuser by CWM method, but that ended in a startup-loop.
Had to Flash back Stock-ROM to recover.
Maybe try tomorrow again.
OK, Gave it a second try. This time without trying to root.
Well, the wake up issue does not exist anymore.
Unfortunately, it´s just because the phone does not start to Deep Sleep anymore.
It reduces processor rate, but does not start Deep Sleep.
That´s the cause for higher battery consumption.
By the way:
- The package of my phone is not labeled "Tianhe", but "CGC".
- Both cameras did work with this Rom.
- My phone has 8GB of memory and stock ROM is 03/2014
Hello
Eleichstetten said:
Gave it a try.
Installation did work, but I missed keyboard.
Did install keyboard from APK.
Then tried to root. Framaroot said "ok", but Superuser did not work.
Tried to install Superuser by CWM method, but that ended in a startup-loop.
Had to Flash back Stock-ROM to recover.
Maybe try tomorrow again.
Click to expand...
Click to collapse
I have tried your rom but camera still not working for me...i have 8GB version.
---------- Post added at 01:03 PM ---------- Previous post was at 12:59 PM ----------
Hello,
I have tried the last modified version of this rom but the camera is not working for me..not frontal one,not the back one..i have tried all roms from needrom(tianhe,mlais or star...)..no one is proper to have working camera...any advice
I did reset my phone with this firmware from Pandawill Forum (8GB version). The firmware is for H920+ that are produced after March 2014.
It seems, that there has been a change of camera hardware.
http://www.pandawillforum.com/showthread.php?25569-ROM-ROM-for-Tianhe-H920&p=136188&viewfull=1#post136188
This seems to be real stock.
If your phone is produced after March, 2014 and this firmware does not solve the problem, there is a high probability that it is defective.
How to find out?
How can i find out what is the date manufacture of my phone?
about Tianhe H920+ turbo /pandawill/, rear camera problems
validoican said:
I have tried your rom but camera still not working for me...i have 8GB version.
---------- Post added at 01:03 PM ---------- Previous post was at 12:59 PM ----------
Hello,
I have tried the last modified version of this rom but the camera is not working for me..not frontal one,not the back one..i have tried all roms from needrom(tianhe,mlais or star...)..no one is proper to have working camera...any advice
Click to expand...
Click to collapse
Hello,
After trying all firmwares from panda and needrom i find that there is a hardware problem. BAD CONNECTION between board and camera conector!
Try to open the phone and press firmly camera connector to the board. Then put above something thick 1 mm (non metal) to hold the connector in same position.
It's worked fine for me. Good luck to you!:good:
delltech1 said:
Hi,
i have flashed the "new rom" from pandawillforum. But be carefull, after flashing i wasnt able to start the phone, it softbricked the phone, but i was able to unbrick it. Before you will flash it, take the PRELOADER file from a good known working rom and replace it. Then try to flash it, it will work now.
I have used the phone without the simcard, Wifi was enabled, Gmail synchronization also, i have used the phone for about 5 days, wakeup issue didnt reappeared. Camera is working also. Just search in the forum for H920 and you will find many topics, but i can also post the link here:
4GB version:
http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool
8GB version:
http://www.pandawillforum.com/soft/12J36_S131WT_H920+_8P64_20140329_JB2V1.2.V02.MP.EN.rar
Like i said, use a good working preloader, you can take it also from an older ROM, doesnt matter.
Click to expand...
Click to collapse
How do you unbrick your phone... ??? Please advise !!!
I have a phone which is now stuck or brick all are on white screen. My phone model is Starmobile Navi
Phone specifications:
1.2GHz Quad-core Processor Cortex A7
VideoCore IV GPU
1GB RAM
4GB Internal Storage, Expandable via micro SD Card
4.0-inches WVGA Display
5.0-megapixels primary camera with LED Flash and Auto Focus
VGA secondary camera
Dual SIM, Dual Standby
3G, HSPA+, WiFi, WiFi Hotspot, GPS, GLONASS, Bluetooth
Android Jelly Bean 4.2
1,500mAH Battery
It is all started when i root my device using vroot and install some fonts and reboot my phone. Phone is stuck on boot animation so i decided to boot on recovery mode and make a restore factory setting. Phone is still at boot animation. I search some guide on flashing broadcom device which is the xolo opus q1000 which is almost thesame specs with my phone and the problem is i didn't notice that the q1000 is 5 inch display. All flashing steps are done without problem then phone is detected by pc but is all on white screen. Please i really need help.
Please upload Starmobile Navi Stock Firmware.
seira_eivon said:
I have a phone which is now stuck or brick all are on white screen. My phone model is Starmobile Navi
Phone specifications:
1.2GHz Quad-core Processor Cortex A7
VideoCore IV GPU
1GB RAM
4GB Internal Storage, Expandable via micro SD Card
4.0-inches WVGA Display
5.0-megapixels primary camera with LED Flash and Auto Focus
VGA secondary camera
Dual SIM, Dual Standby
3G, HSPA+, WiFi, WiFi Hotspot, GPS, GLONASS, Bluetooth
Android Jelly Bean 4.2
1,500mAH Battery
It is all started when i root my device using vroot and install some fonts and reboot my phone. Phone is stuck on boot animation so i decided to boot on recovery mode and make a restore factory setting. Phone is still at boot animation. I search some guide on flashing broadcom device which is the xolo opus q1000 which is almost thesame specs with my phone and the problem is i didn't notice that the q1000 is 5 inch display. All flashing steps are done without problem then phone is detected by pc but is all on white screen. Please i really need help.
Please upload Starmobile Navi Stock Firmware.
Click to expand...
Click to collapse
Or can anyone suggest me a phone that thesame specs with my phone
custom rome navi
go here at Facebook and search 'starmobile navi official' hope it helps.....
I am using Micromax Bolt Q370 smartphone
Phone Highlights :
[
- 1.2GHz Quad Core Processor
- 1GB RAM With 8GB ROM
- Dual SIM
- 4.5 Inch FWVGA Touchscreen Display
- 5 MP Rear Camera With LED Flash
- 2 MP Front Camera
- 3G/WiFi
- Bluetooth 4.0
- FM Radio
- 1650 MAh Battery.
Micromax Bolt Q370 Specifications
Collapse All Sections
Network
Technology / Frequency Bands GSM : 900/1800 MHz HSDPA : 2100 MHz
Battery
Type Li - Ion
Capacity 1650 mAh
Standby 210 hours
Talktime 360 mins
Built
Dimensions -
Weight -
Form Factor bar
Colors Black
Display
Size pixels
Type color : TFT
Colors 16000000 colors
Secondary Display no
Camera / Imaging / Video
Camera Yes 5.0 Megapixel
Resolution 2592x1944 pixels
Zoom yes
Flash yes
Secondary Camera yes
Secondary Camera
Flash no
Connectivity
Bluetooth Yes
Wlan/Wi-fi Yes
USB yes
GPS yes
Data
GPRS Yes
EDGE Yes
3G Yes
Internet Browsing Yes , Android Webkit
Media
Audio Playback Yes
Video Playback Yes
Ringtones MP3 and Polyphonic,WAV
FM Radio Yes
3.5mm Headphone Jack yes
Memory
Inbuilt 8 GB
Memory Slot Yes microSD/TransFlash
Messaging
SMS Yes
MMS Yes
Email Yes
Software
Operating System Android 5.1 ]
My device doesn't have any CWM, TWRP bla bla custom recovery, as Yet its not available for my phone. I rooted my phone, Installed Xposed Framework with Terminal Emulator, successfully done. installed Flashfire (No, Not Flashify), Nandroid Backed Up. Then Flashed Dolby Atmos Successfully. Installed Viper4Android successfully.
Next Day, I uninstalled Both, and tried Flashing XtremeMusic Mod with Flashfire. But I am Bricked.
As I have no custom recovery installed, (Actually I even can't access to stock recovery too, tried different hardware key combinations, took help from Internet also, but no luck. Sometimes pressing these keys make be stuck in boot loop only. Recovery opens when I use some rebooting apps but then stuck in No Command screen).
After bricking my phone, I went to service centre, and they flashed Stock ROM and everything fine again. Then at home, I tried to restore that backup I made with Flashfire with Flashfire but flashfire showedan error message that Unable to decompress the backup. rebooted and Again Bricked. No custom recovery installed so I can't recover to normal state again. Bricked Again within 1 hours. My brain is not working now.
if flashfire can't restore its own nandroid backup,then why there is a backup option available?
At every week, I brick my phone, Visit Micromax Care and Fix it (They do not void warranty even after root). No custom recovery/ ROM available for my phone, where lower end devices like Micromax Bolt A65 has custom recovery available.
Now my phone is bricked, no recovery available, so how to fix it?
Well. I got an unofficial stable TWRP 2.8.5.0
Sudarshankakoty said:
Well. I got an unofficial stable TWRP 2.8.5.0
Click to expand...
Click to collapse
Glad to see that you made it on. Good Day
Salman Al-Badgail said:
Glad to see that you made it on. Good Day
Click to expand...
Click to collapse
Cheers ?
Hi,
last year I bought a NPET Android TV BOX with 2GB RAM and 8GB ROM. It was equipped with an Android 6.0 ROM from factory which I am searching now.
In December 18, I had the idea to install the ATV Xperience SW, because the factory one worked...lets say OK. But not flawless and with limitations.
I prepared a TWRP 3.0.2 mircoSD card and backuped BOOT, DATA and SYSTEM, just in case something goes wrong and...the ATV installation went wrong!
Red Light was the result and the box didn't boot up by pressing the power button. I plugged the USB Cable in and flashed a A95X firmware, which seemed to be similar in terms of HW with my boxes. And everything worked, except Wifi and BT. Doesn't matter, I thought, I have TWRP and my backup, but it doesn't worked out. BOOT and DATA partitions could be recovered but not the SYSTEM partition (createTarFork() process ended with ERROR=255). I tired several other images, but neither Wifi nor Bluetooth could be actitivated. For testing purcposes, I have installed OpenELEC on a microSD card and both, Wifi and BL, started to work again. But as this box is for my girlfried, she wants to have Android back on this device. Wifi and BT Chip is the KM63351412 (Please see attached PICS of the mainboard).
Does somebody of you has the factory image of this box?
I have searched the Internet the last couple of days, but couldn't find it. I have also contacted NPET directly, but no response so far.
Or does somebody know an android image with the KM63351412 chipset embedded?
Hi All,
fortunately, a guy called "aidanmacgregor" has made an universal image which contains various wifi and bt driver in this image.
https://forum.xda-developers.com/an...m-android-tv-custom-rom-7-1-2-s905x-t4098131/
for me, this box called npet s905x is now fully working again!
Thanks to the creator @aidenmacgregor!
Cheers,
Cromatic
??