Related
how can i fix that? when i lock and then unlock it does it directly no lock screen comes. no lsinding tab or soming.
Yes !!!! TouchPad android ROM still not 100% working normally, please wait for future update !
You have to enable it in settings, cyanogen mod settings, tablet tweaks. Deselect the disable lock screen option.
Sent from my T959 using XDA App
And then wail because the lock screen is active but there's no pin or pattern unlock area present. In which case see my response on the same topic in the cyanogen mod forum for a fix
Sent from my GT-I9000 using xda premium
I actually like not having a lockscreen. Its unnecessary in my opinion
Sent from my Eris using XDA App
I'm having the same problem. The fix offered above didn't do anything. Any help is appreciated.
Settings > Cyanogenmod Settings > Tablet Tweaks > Uncheck "Disable Lockscreen"
Did not work for you?
No, the screen lock now works when I boot it up, but after that I when I use the power button to shut it off and on the lock screen doesn't start up. I've even tried downloading a whole bunch of other ones.
Hi
Just bought the Galaxy SIII last week - have not tweaked it in any way (apart from rooting and using Go Launcher ex). Works great apart from a couple of things security related:
When I try to enrypt device or encrypt sd card there are no options to enter pin and the continue button is greyed out for both
I want to securely lock the screen with a pin but the first unlock screen to appear just requires you to slide the lock button to the right to unlock the screen enabling full access to the phone. I basically want the phone to immediately (and only) ask for a pin when it comes out of standby.
Thanks for your help!
GeorgeM
Menu | Settings | Security | Screen Lock
S3 encryption - Solved!
Thanks madbob - had already done that. The problem was I was using Go Locker but hadn't enabled it in the Go Locker settings. As for the encryption not being available....I had a 6 digit numeric pin set but it requires an alphanumeric password before encryptioon is allowed.
DDJ
Hi all,
i've installed the Tasker Trial (from the developer site) a few days ago on my SGS III (no root, using stock rom).
I want Tasker to disable my Lockscreen security when i'm at home. Recently i tried this setup:
Profile: Trusted Zone
State: Wifi Connected [ SSID:ssid1/ssid2 MAC:* IP:* ]
A1: Secure Settings [ Configuration:Clear Password/Wait For Unlock ]
Profile: Untrusted Zone
State: Not Wifi Connected [ SSID:ssid1/ssid2 MAC:* IP:* ]
Abort Existing Task
A1: Secure Settings [ Configuration:Set Pin ]
Click to expand...
Click to collapse
I've tried nearly every setting i could imagine. With and without "Secure settings" plugin, pattern or pin on lockscreen, foregrund mode with notification icon or background without notification. Also i've registered Tasker and secure settings plugin as device admin in security settings.
My problem is, after setting up all necessary profiles and tasks everything seems to be fine, but after a while the display is locked even though i'm connected to my wifi at home. (yes, wifi is enabled all the time, even in lockscreen ;-) )
Also i've noticed that tasker sometimes displays a notification saying "Low memory". On SGS3? Realy?
I hope anyone could help me how to run tasker in a reliable way on sgs3.
Thanks in advance.
Hey man, sorry I can't help but I am running one task on my Spirit GS III.
My task is to connect to Wi-Fi according to the near cell tower.
Anyway, mine seems to be working just fine.
Sent from my SPH-L710 using xda app-developers app
I dint think everything is perfect with tasker and ics. I think I red in the google groups about some things that may not function perfectly.
I have my lockscreen disabled when Bluetooth is connected in my car, and when it's connected to power. Sometimes it works, sometimes it doesn't. Sorry, that's the best I can offer you.
Sent from my GT-P1000 using Tapatalk 2
I've used tasker since my desire days. I had profiles that turn wifi on and off and go into silent mode etc.
The only profile that doesn't work for me is turning off the LED. In fact for me I haven't found anything that will turn off the LED
Sent from my GT-I9300 using Tapatalk 2
Thank you guys.
I've also searched the web.
Unfortunately, i think there is a problem with Tasker and ICS (especially with SGS3?).
Maybe there will be an update for tasker...
Does anyone of you knows an app which allows me to control the Lockscreen behaviour through Wifi status?
eLiTeFLO said:
Does anyone of you knows an app which allows me to control the Lockscreen behaviour through Wifi status?
Click to expand...
Click to collapse
Give Delayed Lock a go, there's a free trial in the store. Works perfectly on the S3
Sent from my CM9 TouchPad
It's working like a charm for me to enable/disable the lock screen security with Tasker and secure settings. I need it because of our Internet certificate at our University.
fl4m3y said:
It's working like a charm for me to enable/disable the lock screen security with Tasker and secure settings. I need it because of our Internet certificate at our University.
Click to expand...
Click to collapse
Can you post your setting for Tasker and secure settings please. Do you use pin or pattern on the lockscreen?
@Isadora: I'll give it a try
Sent from my GT-I9300 using xda app-developers app
Yes No problem... I just need to translate my tutorial. Just wait a bit
And I'm using pattern
eLiTeFLO said:
Can you post your setting for Tasker and secure settings please. Do you use pin or pattern on the lockscreen?
@Isadora: I'll give it a try
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I use Pattern, and this worked for me.
1)
Press the "+" to create a new profile. Name it what you want (I called it "unlock at home")
Press the "state" button.
Press the "Net" button.
Press the "Wifi Connected" button
Press the search button for the "SSID" and choose your network (wifi must be turned on!)
Press the green accept button.
2)
Now the "Task Selection" window appear.
Press "New Task" and name it whatever you want (I called it "Unlock")
Press the "+" button
Press the "Display" button
Press the "Keyguard" button
Set the Keyguard status to "Off"
Press the green accept button.
Press the green accept button again.
3)
Now you are back at the main profile window. Long press on the name you made for 2).
Press "Add Exit Task"
Press "new task" and name it what you want (I called it "Lock")
Press the "+"
Press the "Display"
Press the "Keyguard"
Set the status to "On"
Press green accept button.
You are done.
Now you phone will disable the keyguard when you are connected your home wifi network and enable it when you are not connected.
Notice. If you turn the screen off and on again within a second or two, the screen will turn off again, dunno why. So when you test it, turn the screen off and wait like 5 seconds and then turn it on.
Good luck
fl4m3y said:
Yes No problem... I just need to translate my tutorial. Just wait a bit
And I'm using pattern
Click to expand...
Click to collapse
I made this tutorial for the eduroam networks at german/european universities. In this tutorial it will be explained how to setup an automatic enableing/disableing pattern lock. At my university place I have to use pattern or pin lock because of the "telekom root ca 2 certificate", otherwise the internet won't work. So the described steps should be very similar to your problem.
I edited the parts so you can use it 1:1
Requirements:
- Installed and working BusyBox App
- Installed and working Secure Settings App
--->Installed Helper in Secure Settings
- Installed and working Tasker
- Create Lockscreen (Password, Pin or Pattern Lock)
--------------------------------------------------------------------------------------------------
Open Tasker Application:
- Create new profile and name it like you want.
- At the "First Context" choose location and locate the place where you don't need the secure lockscreen. Instead of location you can choose whatever you want. In e.g. WiFi
- If you're done, just add a "New Task" and name it e.g. "deactivate pattern" or how you like
- Add an action ( Plugin -> Secure Settings -> Edit -> choose at DEV ADMIN ACTIONS "Password/Pin" or at HELPER ACTIONS "Pattern Lock"
---> For Password/Pin use these settings:
imageshack.us/photo/my-images/266/screenshot2012071109483.png
---> For Pattern Lock use these settings:
imageshack.us/photo/my-images/69/screenshot2012071109551.png
- Save the settings and check them all. You got a new profile with one task now. Long press at the task and add an "Exit Task". Use the same steps from above ( the last 2 steps ) just name it e.g. "activate pattern"
---> For Password/Pin use these settings:
(Insert your security Informations)
imageshack.us/photo/my-images/267/screenshot2012071109574.png
---> For Pattern Lock use these settings:
imageshack.us/photo/my-images/515/screenshot2012071109571.png
- Save all the settings you made and then you should have a profile which shows minimum one context and 2 tasks ( Input and Exit task)
That's it... i hope it work! If not let me know Tasker and Secure Settings are a very powerful tool and handle them with care!
Good Luck
Thanks to all of you.
Today i've tried the Trial version of "Delayed Lock" from the market with the Wifi Plugin.
An what should i say?
It works like a charm :good:
Less features than Tasker, but less expensive...
Nevertheless i will try your profiles even if i think i tried this settings before
Regards
For me it doesn't quite work.
When I turn off the pattern lock, it activates swipe unlock instead of no unlock screen.
I tried to turn off keyguard too, but with no effect at all.
I'm on stock rom with root.
Same for me, but I like it so. Don't know if this is a bug or a feature.
Sent from my GT-I9300 using xda app-developers app
Guys, check Tasker website, there's a beta version there. It might solve your problems.
EDIT: check if you have the latest version: 1.3u1 I haven checked before posting, there is no more beta. Sorry.
Sent from my GT-I9300 using Tapatalk 2
Ok maybe i got something: When you configure a VPN or install a new certificate, Android deactivates the possibilty to choose the less secure options in the security / lockscreen menu. If you now delete any VPN connection and/or user defined certificates, tasker and secure settings should work. At least for me it does. Can anyone verify this?
Hi. When I received the phone, out of the box security was not enabled and I was able to unlock the screen only by sliding the pad lock UP on the lock screen.
This worked well for me as I could read all notifications while locked, without unlocking the phone.
I then tried out the other security methods including Pattern. Didn't like it and wanted to go back to slide to unlock.
Under Security there is not a Slide to Unlock option.
Now, if I leave it as No Security, anything unlocks the screen, even a tap.
How do I get the original pad lock Slide to Unlock feature back?
A hard reset?
Sorry if this has been answered before, I did a quick search and didn't find a thread.
Thanks.
Set it to wallpaper lockscreen. Personally I use productivity so my messages go on lockscreen
Btw option is under settings / personalization / lockscreen type
Sent from my HTC One using xda premium
Same Issue
Hello I am currently having the same issue with my lock screen. I hadn't even realized that switching the lock screen type was the reason, but it makes sense. Did you find a way to fix it? The above poster's method did not work for me.
Thanks for putting this problem in words!
So it looks like this is an issue that happens whenever you have an accessibility setting enabled as described here. This goes for any accessibility settings... Can someone confirm if this still happens with other Sense ROMs or if this only happens with stock?
http://forum.xda-developers.com/showthread.php?p=40407262#post40407262
Can't seem to find a fix for it though, hopefully with 4.2.2
Hi guys! Made a fix for this issue please refer to this thread.
http://forum.xda-developers.com/showthread.php?p=41744250
Please report if it doesn't work.
new version is available with stable version no bugs goto http://forum.xda-developers.com/yureka/themes-apps/app-gexture-enable-wakeup-gesture-link-t3226437
Amazing work brother, works like a charm, just a little problem, when I link the camera app with "C" gesture, it does open but it by-passes the pattern lock too so anyone can now open the pattern lock by drawing C while the screen is off, so could you do something so that if the user drew C , it opens camera and then if home key or back key was pressed, it would get back to the pattern lock screen?
parasthakur37 said:
Amazing work brother, works like a charm, just a little problem, when I link the camera app with "C" gesture, it does open but it by-passes the pattern lock too so anyone can now open the pattern lock by drawing C while the screen is off, so could you do something so that if the user drew C , it opens camera and then if home key or back key was pressed, it would get back to the pattern lock screen?
Click to expand...
Click to collapse
Working on it...
Nice Job Bro....
I was waiting for this one very desperately...
:good::good::good::good::good::good:
Everything is works IFF SElinux status is permissive (update OP for that)
Hey... I am not a yureka user.. But app looks really good please add support for other devices running cm or aosp and also instructions for developers what changes to be made while compiling custom kernel to make this app compatible..
You may publish it on playstore too
gohel.vishal said:
Working on it...
Click to expand...
Click to collapse
i want to use this please help me.
now i am on stock and i am getting this error please tell me how to solve this .
gohel.vishal said:
geXture:Enable different wake up gestures, apart from the default 'Double tap to Wake' And Link Apps Or Media Control
Hi Yureka Users!...
I Have Something Special For You....
This Is My First Android Application on xda...
What Is geXture?
geXture is application that enables screen-off gesture and link apps or different media control like oppo devices..
Available Gestures
Double Tap
Swipe Up
Swipe Down
Swipe Right
Swipe Left
Draw 'O'
Draw 'E'
Draw 'M'
Draw 'W'
Draw 'C'
Recommended Settings
Double Tap - No Action
Swipe Up - Media Play/Pause
Swipe Down - Media Stop
Swipe Right - Media Next
Swipe Left - Media Prev
Draw 'O' - Camera
Draw 'E' - Browser(Uc Browser,Google Chrome)
Draw 'M' - Messenger
Draw 'W' - Whatsapp
Draw 'C' - Dialer(Stock,TrueDialer)
Screenshot
Download From Attachment
Please Note: This app works only on YU Yureka. App requires root acess to function and works on any rom or kernel compiled from CM sources
XDA:DevDB Information
geXture, Device Specific App for the YU Yureka
Contributors
gohel.vishal
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2015-05-10
Created 2015-05-10
Last Updated 2015-05-10
Click to expand...
Click to collapse
Bro, can we use these gestures to open apps of our choice?
Or we can only use the mentioned apps with gestures.
Shivam Vashishtha said:
Bro, can we use these gestures to open apps of our choice?
Or we can only use the mentioned apps with gestures.
Click to expand...
Click to collapse
You can use any app of your choice
gohel.vishal said:
You can use any app of your choice
Click to expand...
Click to collapse
I tried.. But gestures aren't working.. I am using Yureka on stock CM12, CWM recovery and stock kernel.
Help!
gohel.vishal said:
Click to expand...
Click to collapse
now it is working very nice app.
suggestion : application should be in alphabetical order. :good:
bug: i dont know everybody is facing or not.
using gesture go to app.
now go to home and now you can not go to recent panel. to go to recent panel have to lock device and unlock it now you can go to recent panel
Does this work with andriod 5.1
what about stock os?
Is this app not installable in stock os that has been now updated to lollipop using official download(upgrade)?
What can be done for this situstion?:angel:
Great Work, very promising
This works very well. however i would like to note down some observations
1. I keep getting geXture started toast every now and then
2. You need to launch the application once every reboot. (in spite of allowing autostart at the beginning)
3. The app list should be alphabetical order as pointed out earlier by Ashish earlier.
4. Single tap and long on physical home button seems to stop working when this app is active. Double tap works..
5. Long press on menu does not work.
I am on stock CM12
Would this have an impact on the battery and if yes how significant?
and last but not the least the OP should make it clear that SELinux mode has to be permissive for this app to work. i uninstalled it once because i thought it was not working
Doesn't work
@gohel.vishal
I am a YUser,I have got CM12 & Thunderzap kernal installed!This tool is not working,it just takes me to the lock-screen after any gesture i.e. it only wakes yureka up.
Hi,
I am also on YU stock ROM and kernel but getting FC on invoking the gesture.
Great app however needs improvement
First of all I would like to appreciate the efforts behind this app.
Secondly I would like to point out a bug in this.
As it requires root, if gesture is supplied to a locked device with secure lockscreen enabled, it surpasses it to open the app or perform the task. And moreover few apps like swiftkey (keyboard) do not provide full functionality with such unlock.
Eg : -
1. Set some gesture to open Whatsapp.
2. Set a secure lockscreen.
3. Set Swiftkey as main keyboard. (Enable gesture typing)
4. Lock phone.
5. Provide whatsapp opening gesture.
Bug - You won't be able to use gesture typing unless you lock your phone, stay on lock screen, unlock your phone by providing unlock code. After then only gesture typing can be done.
I believe there is a counter set in apps like swiftkey that check whether lockscreen secure, then do not allow gesture as it may allow a user to identify the password (Which I believe could be the case and if so it is good).
Proposed Solution : I believe before unlocking and opening the app, you would need to take the user to secure lockscreen page and then only allow opening the app. As if someone else comes to know the gesture of any app it would become a security breach.
I am not an android developer, but I can help you with testing and some use cases.
Cheers !!
Little bugs
Swipe no working on SwiftKey after installing it... .
I think u have stopped working on this app....
I have given U credits for this app in my thread http://forums.yuplaygod.com/threads/rom-arm64-yureka-port-5-0-2-miui-v6-lollipop.20135/
Can you please make this available for YUPHORIA too?
hariks0 said:
Can you please make this available for YUPHORIA too?
Click to expand...
Click to collapse
Does youphoria have double tap?