Related
Would like some help. I have flashed CM 11 and can't make calls. It says mobile network not available. Tried flashing AOKP rom as well and same thing. Mobile data works fine, although i have gotten a popup twice that says 'Google Play Services not supported by your device, please contact your manufacturer' (no noticible issues from this, google stuff i've tried so far works). I have included a screenshot so you can see my baseband and rom version, etc.
Now, i had a great deal of trouble getting a rom flashed to start with, CWM put me into a bootloop and TWRP wouldn't flash anything because it said it couldn't mount /storage when i tried. Used Philz advanced CWM (love it btw, will be using it from now on). Still wouldnt flash the hltespr specific CM11 version so had to use the unified hlte version (it gave me the status 7 asserts issue, but editing the asserts out just gave me a bad file error when flashing). I wiped data/cache/dalvik between each flashing. I don't know if any of that would have bearing on this problem, just including any details i can. Any advice?
Verilin said:
Would like some help. I have flashed CM 11 and can't make calls. It says mobile network not available. Tried flashing AOKP rom as well and same thing. Mobile data works fine, although i have gotten a popup twice that says 'Google Play Services not supported by your device, please contact your manufacturer' (no noticible issues from this, google stuff i've tried so far works). I have included a screenshot so you can see my baseband and rom version, etc.
Now, i had a great deal of trouble getting a rom flashed to start with, CWM put me into a bootloop and TWRP wouldn't flash anything because it said it couldn't mount /storage when i tried. Used Philz advanced CWM (love it btw, will be using it from now on). Still wouldnt flash the hltespr specific CM11 version so had to use the unified hlte version (it gave me the status 7 asserts issue, but editing the asserts out just gave me a bad file error when flashing). I wiped data/cache/dalvik between each flashing. I don't know if any of that would have bearing on this problem, just including any details i can. Any advice?
Click to expand...
Click to collapse
Have you upgraded your bootloader to NH7? I know most of the newly-updated CM-based ROMs require you to be on NH7 before flashing. That's most-likely why you weren't able to flash the htlespr ROMs. The unified ROMs no longer include the correct APNs for Sprint, so that's why you don't get service on it. I don't know why mobile data works on it.
topherk said:
Have you upgraded your bootloader to NH7? I know most of the newly-updated CM-based ROMs require you to be on NH7 before flashing. That's most-likely why you weren't able to flash the htlespr ROMs. The unified ROMs no longer include the correct APNs for Sprint, so that's why you don't get service on it. I don't know why mobile data works on it.
Click to expand...
Click to collapse
No, didnt realize that i needed to do that. I'll do some research on it because i don't have any idea how to update the bootloader. If you have a link to a good tutorial that would be wonderful! Thanks!
Ok so i tried that, found this tutorial, followed it, no luck. Tried full wipe/reset after that to see if it would let me install the hltespr versions, still no dice. Same situation, mobile data works, calls don't. Will have to wait till daylight to try texting so i don't wake anyone up but i suspect that texting won't work either. Has anyone experienced this and fixed it? Lol i really didn't drop $100 on a phone to be saddled with all the Samsung and Sprint baloney that it comes with, don't wanna unroot....
Bump
Anyone have ideas on this? Have continued to try fooling around with the udater-script file to resolve the status 7 problem so I can install the hltespr variant, still no dice. Please someone help!
Bump!
Sorry, I typically don't have access to XDA forums on the weekend, so couldn't answer your question till now.
You flashed only the baseband/modem, not the Bootloader. If you want to update the Bootloader, you need to use ODIN to flash the Complete OTA NH7 Update.
In order to update the Bootloader, you need to make sure that you use the PC ODIN (not the mobile one) and that you completely power off the phone before you enter download mode (don't access download mode by using the extended power menu when shutting down the phone). I don't think you need to do the battery pull that Freeza had in his instructions (I didn't do it when I ODIN-flashed the NH7 OTA update), but it wouldn't hurt to do it.
Thanks for that, I will try it as soon as I get home tonight! The next thing I had decided to try was to unroot, to back to stock, then try flashing that before I start with the custom recovery and ROM. Do you think I should do that first before doing the whole thing or could that work just flashing that with my phone as-is?
Verilin said:
Thanks for that, I will try it as soon as I get home tonight! The next thing I had decided to try was to unroot, to back to stock, then try flashing that before I start with the custom recovery and ROM. Do you think I should do that first before doing the whole thing or could that work just flashing that with my phone as-is?
Click to expand...
Click to collapse
Well, I always recommend a full wipe (data, system, cache, dalvik) when flashing ROMs. I haven't wiped my internal storage or external storage since I got the phone, so that's not really necessary.
I don't think that unrooting your current ROM is necessary. Flashing the ODIN OTA update will automatically remove root access, so that's not an issue. Here's the steps I took when I updated to NH7 and installed my current ROM (see my sig):
Make a Nandroid backup.
I always do this just so I have a "record" of what I left behind. It also allows me to have all of my app data that I can restore via Titanium Backup (you have to buy the Pro version in order to restore specific apps from a Nandroid backup). I always store a copy on my ext. storage and on dropbox.
Do a full wipe
As I mentioned above, I always wipe data, system, and the caches when flashing ROMs. While I have to take some time to get the new ROM exactly as I like it, it minimizes any potential FCs and errors that some people get when dirty flashing.
Install NH7 all-in-one via ODIN
I installed the NH7 via ODIN. Please note that this is the fully stock, unrooted ROM and will also install the stock recovery.
Let the phone boot and connect to Sprint. Update Profile and PRL.
I do this periodically whenever I go back to stock (from AOSP). I rarely have connection issues, but updating the PRL an profile can help with those.
Install a custom recovery using ODIN.
My recovery of choice is TWRP, but others have found just as much success with CWM and Philz. Just make sure that you're installing the correct version of the recovery (4.4.X version, not the 4.2.X version). I always reboot to the main system after installing a recovery, but that's up to you. In the rest of this post, I'll say "TWRP," but I really mean "custom recovery."
[OPTIONAL] Make a Nandroid backup of the stock ROM
I always do this, but I recognize that it's not necessary, especially since we can just ODIN back to this image at any time. I just like having the option of having a stock backup on the device (in case catastrophe strikes while I'm away from a computer).
Use TWRP to flash your AOSP ROM of choice.
If you haven't installed any apps or messed around with the settings, you shouldn't have to wipe before flashing, but (in case you haven't noticed by now), I tend to err on the side of caution, specifically: wiping everything (data, system, and the caches) before I flash anything.
Set up the ROM how you like it and [OPTIONAL] make one last Nandroid Backup
Whenever I set up a new ROM to the exact way I like it (statusbar settings, accounts set up, apps installed and configured, etc), I make a nandroid backup of my device. This allows me to go back to that "fresh" image whenever something happens to the device and I don't have to muddle around fixing those minor tweaks. Again, I tend to err on the side of wiping the phone too often and taking too many backups, but I've rarely had issues with my phone and ROMs because of it (to the point where I can spend most of my XDA time helping others with their phones), so it might be prudent to follow the advice.
Anyways, that's how I upgraded to NH7 and installed a custom ROM. Others may take a less conservative approach and you're welcome to adjust any of the optional steps.
Hope this helps!
-Topher
OK, did all that successfully, when it went back to stock stiil had the same issue. Mobile data functions, mobile network for calls/SMS doesn't. Did the whole update prl/profile and even tried reactivating from settings, still nothing. Was able to install custom recovery (Philz) and the hltespr CM11 variant instead of the unified generic version. Still has the same problem, mobile network not available. Everything else works perfectly. I did verify in settings that it still wound up as the NH7 after everything I did. Note I did a full reset before each thing that got flashed in this process, and one more for good measure after. Let it boot to the system between steps too.
Lol I've been rooting and switching between ROMs for years and have never encountered anything like this. I'm stumped....
Verilin said:
OK, did all that successfully, when it went back to stock stiil had the same issue. Mobile data functions, mobile network for calls/SMS doesn't. Did the whole update prl/profile and even tried reactivating from settings, still nothing. Was able to install custom recovery (Philz) and the hltespr CM11 variant instead of the unified generic version. Still has the same problem, mobile network not available. Everything else works perfectly. I did verify in settings that it still wound up as the NH7 after everything I did. Note I did a full reset before each thing that got flashed in this process, and one more for good measure after. Let it boot to the system between steps too.
Lol I've been rooting and switching between ROMs for years and have never encountered anything like this. I'm stumped....
Click to expand...
Click to collapse
Dumb question but are you a Verizon customer or Sprint?
Sent from my SM-G900P using Tapatalk
Sprint, I've had big red before but when they did away with unlimited data it wasn't worth paying their high rates.
Bump!
Anyone have any ideas on this? I am just confounded as to why this continues even after being reset to stock.
Same Issue!!!
I have the exact same issue and have been trying to resolve it for the last 2 days... Did you find a solution?
I have the same problem on a Samsung Mega. LTE and 3G data work but phone won't dial if LTE is active. It WILL voice dial if only 3G is active. Sprint. CM11.
I had this problem after flashing ROMs as well, but went into Settings>Connections>More Networks>Mobile Networks>Network Mode and selected LTE/CDMA....no network had been selected. That fixed me right up. Weird part is, I could still avcess the web without WiFi....but couldn't make calls or ise my bluetooth headset until I had performed the above steps. Hope that helps.
thanks forget the little things reset wifi and sprint cell extender
GAPO said:
I had this problem after flashing ROMs as well, but went into Settings>Connections>More Networks>Mobile Networks>Network Mode and selected LTE/CDMA....no network had been selected. That fixed me right up. Weird part is, I could still avcess the web without WiFi....but couldn't make calls or ise my bluetooth headset until I had performed the above steps. Hope that helps.
Click to expand...
Click to collapse
well after somehow breaking the miui stock cam when enabling the camera2apk, and being unable to fix it by replacing build.prop, i decided to restore the backup i made in twrp earlier.
restored backup: sticks at MI logo.
tried several times, cleared caches, wiped etc etc.. will not boot after restore.
so i downloaded the stock global rom, and flashed it in twrp: sticks at MI logo. will not boot
downloaded Ressurection Remix rom, flashed that.. works fine. but i want stock or as near as possible for now.
downloaded developer miui rom, flashed that in twrp: stuck at MI logo. will not boot.
tried stock stable rom again... same story, will not boot.
downloaded Miflash, and recommended TGZ archive of ROM. followed instructions and extracted to a folder and browsed to folder with Miflash. hit "refresh"
get error "length cannot be less than zero"
tried using the "mi recovery" method (renaming rom to "update.zip" and power/vol_up)
but for whatever reason, there is no "install update" option even present.
as you can see im having a very frustrating evening. i only wanted to enable the damn google camera.
flash it by edl mode
Sent from my [device_name] using XDA-Developers Legacy app
is there a decent guide for that anywhere? from what ive seen it still requires miflash to be working? which it, frankly, just isnt. but then, nothing is! dont think ive ever had an evening where so many things which are supposed to work all give problems together.
i mean, i could understand if the custom rom was problematic, but its the only thing that *did* work.
404 Not found
well i managed to get a stock rom installed by downloading an older version of miflash... that didnt give any errors and installed the global rom fine.
i would love to know what could be causing all my problems though. seems everthing ive tried should work.
the one that is bugging me more than anything now is that whenever i enable the camera2api, the miui stock camera stops working ( crash on hdr, panorarama mode) and stays broken even if i remove mod.
this should not happen it seems, since there are guides for enabling this and adding the pro features to the camera from higher models.
nobody seems to have an opinion on it, which is very strange considering the number of people who must have done the camera2 mod...
robinlawrie said:
...nobody seems to have an opinion on it, which is very strange considering the number of people who must have done the camera2 mod...
Click to expand...
Click to collapse
I dropped miui long ago, so it is difficult to comment. However, the problem would probably be found in the settings (and/or the drivers in the system). Reinstalling a stock system image and wiping /data (and formatting it, if necessary) should solve the problem. This is, of course, a drastic step - but I would be very surprised if the problem persisted after such a step.
you have to flash lazy flasher after every MIUI stock rom flashing to be able to boot the rom...
google it "lazy flasher'
Hello, i flashed twrp it was working after the first run, when i rebooted and installed the decrypt 4.0 (v18) (which can be found here https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-unlock-bootloader-custom-t3839405) the touch stopped working, so i proceeded to download the miui global v10.3.7.0 from the official site and flash it with MiFlash, it did work, the phone booted as before but the touch was still not working, so i booted into the recovery mode which was the default one again as i cleared the data and wiped the data but the touch screen stills not working, everything was working fine before flashing the twrp...
please, help is required, idk what to do anymore, and there is almost no xiaomi assistance near
---------
update: lol, i think i was a bit desesperated, to everyone that gets into the same situation, i went going back trying every single MIUI build... the one that worked was V10.2.3.0 - Global, everything is fine now, time to do everything again and get anxiety, sorry.
try twrp 3.3.1 unofficial from
https://forum.xda-developers.com/showpost.php?p=80122987&postcount=305
also then flash vendor image https://mirror.akhilnarang.me/MIUI/beryllium/ (9.6.27 is the popular)
flash LINAGE OS
flash DFE Treble https://drive.google.com/file/d/1As6z5v7NEIfOk67jXHBX34cbnFZdEjy9/view ,
later install magisk 19.4
now try one by one all three version of Twisted kernels ( the developer maintains 3 versions based on touch drivers (nvt)
https://forum.xda-developers.com/poco-f1/development/kernel-twisted-kernel-v4-0-beryllium-t3902838
i am hopful you will fix it
zyhpex said:
Hello, i flashed twrp it was working after the first run, when i rebooted and installed the decrypt 4.0 (v18) (which can be found here https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-unlock-bootloader-custom-t3839405) the touch stopped working, so i proceeded to download the miui global v10.3.7.0 from the official site and flash it with MiFlash, it did work, the phone booted as before but the touch was still not working, so i booted into the recovery mode which was the default one again as i cleared the data and wiped the data but the touch screen stills not working, everything was working fine before flashing the twrp...
please, help is required, idk what to do anymore, and there is almost no xiaomi assistance near
---------
update: lol, i think i was a bit desesperated, to everyone that gets into the same situation, i went going back trying every single MIUI build... the one that worked was V10.2.3.0 - Global, everything is fine now, time to do everything again and get anxiety, sorry.
Click to expand...
Click to collapse
Worked for me! Thanks!
zyhpex said:
Hello, i flashed twrp it was working after the first run, when i rebooted and installed the decrypt 4.0 (v18) (which can be found here https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-unlock-bootloader-custom-t3839405) the touch stopped working, so i proceeded to download the miui global v10.3.7.0 from the official site and flash it with MiFlash, it did work, the phone booted as before but the touch was still not working, so i booted into the recovery mode which was the default one again as i cleared the data and wiped the data but the touch screen stills not working, everything was working fine before flashing the twrp...
please, help is required, idk what to do anymore, and there is almost no xiaomi assistance near
---------
update: lol, i think i was a bit desesperated, to everyone that gets into the same situation, i went going back trying every single MIUI build... the one that worked was V10.2.3.0 - Global, everything is fine now, time to do everything again and get anxiety, sorry.
Click to expand...
Click to collapse
I had an experience as bad as yours. After flashing the last miui.eu, I went to boot and the phone does not leave the boot right away. I tried to enter TWRP and the touch just didn't work. I ended up flashing the official TWRP, also none of the touch works. I started getting desperate and settling for formatting for ROM stock and losing my 2 year old data, because I went to fastboot and flashed stock 11.0.8.0 and guess what? the touch didn't work, even in stock, I started to go crazy. So I had the stupid idea of putting the stock and blocking the bootloader, I ended up ****ting even more because even after the flash and blocking the bootloader the touch was dead. I was already giving up and thinking about paying someone as access to EDL mode to restore the phone. I ended up seeing your post and had the idea of plugging a mouse into the cell phone's type c input, and believe me the mouse cursor worked. Then I managed to unlock the bootloader again and flashed the stock that you recommended, and voiala the touch went back to work. I ended up going back to miui.eu and I'm ready for new flashes. It seems that we like to suffer LoL. I think this topic should be fixed at the top in case anyone else falls into this insane problem.
Reflash firmware n try ones.. only firmware
dorfohm2 said:
Worked for me! Thanks!
Click to expand...
Click to collapse
Im having the same issue.What should I do??My touch was working totally well before flashing TWRP.
solved by plugging in a mous in TWRP and navigating the UI to restore my "full" backup of all partitions! if you have done a backup! cheers and thanks for the idea of the mous! not expected it to work in TWRP though!!!
Hey, I am using a redmi note 4 Snapdragon version,and I installed custom rom on my device,the installation was successful but hardware components are not accessible to me now.Like, wifi,bluetooth is not turning on, camera app is not present and even flashlight icon in notification shade is blurred out.
I installed resurrection remix and aex ROMs,I know they are fine cause i have installed them before(same versions) in the same phone,but now they are showing problems.And gapps are not installing either twrp recovery shows corrupt file even though its not for sure.
I think i messed up while wiping data ,I wiped the internal storage and formatted the phone too, that is the only thing i did that was different this time.
Please help if there is a link to any thing that i deleted and need to replace please provide that,
Thank You
Sounds like a firmware problem, get latest firmware here, and flash it from recovery.
RogueMoon said:
Sounds like a firmware problem, get latest firmware here, and flash it from recovery.
Click to expand...
Click to collapse
It worked!, Thank you man.
Also I have a problem with the same device that it charges in recovery or switch off mode but it does not charge while in system.Thinking of starting a new thread but if you can answer ,no need to do that.Again Thanks.
Weird. First I would make sure that the device indeed doesn't charge in system (install Ampere app, or use a USB power meter if you have one) - otherwise it might be a UI problem. Other than that, if that's indeed the case I would do a clean reflash, starting with flashing a latest stable MIUI in fastboot, then recovery again, factory reset (DONT format system) and ROM (which one are you using?) again. Maybe others could chime in. Good luck!
RogueMoon said:
Weird. First I would make sure that the device indeed doesn't charge in system (install Ampere app, or use a USB power meter if you have one) - otherwise it might be a UI problem. Other than that, if that's indeed the case I would do a clean reflash, starting with flashing a latest stable MIUI in fastboot, then recovery again, factory reset (DONT format system) and ROM (which one are you using?) again. Maybe others could chime in. Good luck!
Click to expand...
Click to collapse
Thanks i will try that.?
Edit: solved, pay your bills in time kids !
Hi guys, I have a mobile data issue since i flashed my phone two days ago.
I cannot connect my phone to the internet unless I use wifi. Texts and calls are working.
Issue is occurring on both Lineage OS 18 (unofficial) and CrDroid 11.
I already flashed and reflashed the roms, wipe data, system, everything multiple times, flashed the original modem/NON-HLOS.bin file via fastboot with no luck. Tried on multiple recovery too just in case (twrp, pitchblackRP, OrangeFox). I mostly use sideloading but install from an sd card got me the same results.
Issue happens with rooted (magisk last version) roms and unrooted roms aswell.
I had several issues about twrp/recovery being unable to mount /data, which I tricked to do so by resizing data from ext4 to ext2 then to ext4 again. Not sure that's the good way to do it.
I tried to go back to a clean room with relocking the bootloader and flashing the official fastboot rom but I got stuck on a bootloop. I tried other methods with MiFlash and succeeded into booting the official rom but i'm stuck on the Welcome/new device screen (the little slideshow crash/won't advance to the next step when i have to choose between recover data from an old phone or start from scratch). I went back to crdroid for now.
My first thought was to tinker with the APN but it didn't worked, sometimes i get a message like "APN Settings are not available for the current user" but I usually manage to still write them, with no effect still. I'm on the a french operator called "Free"
Typing ##4636## in my phone app gets me to a debug menu where I can see that I'm not connected to the data services (but i'm connected to the vocal services). I have a way to check the IMS state in this menu, which tells me that i'm not registered, don't know what that means.
Already did the trick of cleaning sim card, going in plane mode, changing favorite network and so on. I'm a little desperate
If you cannot help me with this, can someone points me a good tutorial on how to going nuclear on a phone and delete everything to reflash an official Mi rom ? I'm quite used to flashing roms but I still get a bit lost between a factory reset, a data wipe, and what to flash/wipe/mount in order etc.
Vendor or firmware flashing you test?
I think maybe vendor help
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Sorry i didn't mention it. My last flash attempt was flash Xiaomi FW > flash crdroid > flash gapps >flash magisk and that's my current set up, and it still doesn't works. The issue might lie in the SIM card, i previously tried the sim card of a relative on my phone and it didn't do much but this morning the same sim worked and mine still does not. I'll report back once I have a new one.
Edit: could you explain what vendor is ? What's the difference with the fw or a rom ?
CompoteMonPote said:
Sorry i didn't mention it. My last flash attempt was flash Xiaomi FW > flash crdroid > flash gapps >flash magisk and that's my current set up, and it still doesn't works. The issue might lie in the SIM card, i previously tried the sim card of a relative on my phone and it didn't do much but this morning the same sim worked and mine still does not. I'll report back once I have a new one.
Edit: could you explain what vendor is ? What's the difference with the fw or a rom ?
Click to expand...
Click to collapse
Google...
[INFO] ANDROID DEVICE PARTITIONS and FILESYSTEMS
NOTE: I'm not a developer or something even near to that. I'm a newbie and will be, seems so. All information provided here is copied and compiled from different internet sources like this and many others. This information is according to best of...
forum.xda-developers.com
I'm going to lose it lmao, the reason why I didn't had any access to my mobile data is because... My monthly bill payment didn't went through because of a credit card renewal.... I apparently decided to flash my rom the day of the due date and didn't saw any warning hence the confusion. Probleme solved, I paid my bill and the data is back (what a surprise). i feel like an idiot but i've learnt things, thanks for the link joke19.