Make some kernel for MIUI 8 on Android 6.0.1 Xiaomi redmi note 3 PRO ?
You may try NX Kernel which is working fine for me on EU 6.9.9.
Please give me link. I want to see its function.
Thx
kounir said:
Make some kernel for MIUI 8 on Android 6.0.1 Xiaomi redmi note 3 PRO ?
Click to expand...
Click to collapse
Nx kernel doesn't work for goodix fingerprint sensor. Make sure that you have a fpc fingerprint sensor.
Link- https://www.androidfilehost.com/?fid=24686679545611132
Does NX work on official 6.0.1? Miui.eu or global Dev?
Android2003 said:
Does NX work on official 6.0.1? Miui.eu or global Dev?
Click to expand...
Click to collapse
Yes. But it doesn't support goodix fingerprint sensor. Otherwise, everything is fine.
Zrzahid said:
Yes. But it doesn't support goodix fingerprint sensor. Otherwise, everything is fine.
Click to expand...
Click to collapse
I was on miui.eu 6.9.9 and the Kernel bricked my Phone again with lost imei and efs.
It dont work for me
Android2003 said:
I was on miui.eu 6.9.9 and the Kernel bricked my Phone again with lost imei and efs.
It dont work for me
Click to expand...
Click to collapse
It should work. I used on epic & global beta 6.9.9.
Anyway, flash the ROM again and restore the efs partition.
Zrzahid said:
Nx kernel doesn't work for goodix fingerprint sensor. Make sure that you have a fpc fingerprint sensor.
Link- https://www.androidfilehost.com/?fid=24686679545611132
Click to expand...
Click to collapse
Features?
Sebaskyclad said:
Features?
Click to expand...
Click to collapse
There's no details about the features. Check out this post.
http://en.miui.com/thread-338262-1-1.html
Related
Which Kernel is now better for my Kate on MIUI8 Dev: AGNI or Radon? I want to adjust audio-settings and a stable system with good batterie-life.
agni in my opinion, though if you are on a newer build than 6.11.3 and have the goodix fingerprint reader, you will lose the fingerprint reader access.
Radon for sure.
Stock
For goodix user u should stick to stock kernel otherwise u will have no working fingerprint.
Sent from my Redmi Note 3 using Tapatalk
goofball2k said:
agni in my opinion, though if you are on a newer build than 6.11.3 and have the goodix fingerprint reader, you will lose the fingerprint reader access.
Click to expand...
Click to collapse
I have installed agni on global stable 8.1.1.0 and both fingerprint and dt2w are working fine. While installing agni, it asks for fp type. I have Goodix.
Although I had to add the fingerprints again.
samrat_castle said:
I have installed agni on global stable 8.1.1.0 and both fingerprint and dt2w are working fine. While installing agni, it asks for fp type. I have Goodix.
Although I had to add the fingerprints again.
Click to expand...
Click to collapse
What kernel are u using? Do you need any patch for goodix?
Sent from my Redmi Note 3 using Tapatalk
febry_valdy said:
For goodix user u should stick to stock kernel otherwise u will have no working fingerprint.
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
i have read somewhere that goodix fp works on miui and eu roms with radon but havent been able to make it work. please guide how to make it work. thanks.
febry_valdy said:
What kernel are u using? Do you need any patch for goodix?
Click to expand...
Click to collapse
As mentioned earlier, I simply flashed agni kernel and it asked me the fp type at the time of installation. So I selected goodix.
samrat_castle said:
I have installed agni on global stable 8.1.1.0 and both fingerprint and dt2w are working fine. While installing agni, it asks for fp type. I have Goodix.
Although I had to add the fingerprints again.
Click to expand...
Click to collapse
8.1.1.0 isn't the same as running 6.xx.x or 7.x.x as 8.1.1.0 is a stable build, and the 6.xx.xx and 7.x.x builds dev builds. It's very weird the way Xiaomi is numbering their systems, creates confusion imo.
Rear camera and a fingerprint sensor in all Cyanogen ROMs 13 and 14 does not work? What is the problem?
??????????????
you did a clean flash?
both working in stock MIUI ROM?
KhanStan said:
you did a clean flash?
both working in stock MIUI ROM?
Click to expand...
Click to collapse
yes
all miui roms no problem
you have to change your kernel...
badets said:
you have to change your kernel...
Click to expand...
Click to collapse
Lineage OS 13 installed.
Rear camera and a fingerprint sensor will not work.
I flash the kernel radon
The camera works, but the fingerprint sensor still does not work.
Is it work? I want to switch to my aospextended (i must use miui camera driver for this rom) with rr latest build
I can confirm that my Note 4x is omnivision sensor. And,I'm using RR latest build. Camera works flawlessly on my phone.
Yes it does, but you may need to flash the firmware for omnivision sensor first.
huatz84 said:
I can confirm that my Note 4x is omnivision sensor. And,I'm using RR latest build. Camera works flawlessly on my phone.
Click to expand...
Click to collapse
ocenyx said:
Yes it does, but you may need to flash the firmware for omnivision sensor first.
Click to expand...
Click to collapse
Cool thx ill try it now
HELPME
huatz84 said:
I can confirm that my Note 4x is omnivision sensor. And,I'm using RR latest build. Camera works flawlessly on my phone.
Click to expand...
Click to collapse
ALL ROMs BASED ON LINEAGE OS, AOSP AND OTHER THAT I HAVE USED TO ME HAS PRESENTED CAMERA PROBLEMS, DO YOU HAVE THE FILE OR DRIVER TO FLASH IT? PLEASE
Edinsonpol said:
ALL ROMs BASED ON LINEAGE OS, AOSP AND OTHER THAT I HAVE USED TO ME HAS PRESENTED CAMERA PROBLEMS, DO YOU HAVE THE FILE OR DRIVER TO FLASH IT? PLEASE
Click to expand...
Click to collapse
I didn't flash any drivers or fixes. My previous rom is miglobe. I flashed CM14.1 firmware first than RR ROM and pico gapps.
Sent from my Redmi Note 4 using Tapatalk
How to know which camera sensor does the redmi has?
huatz84 said:
i didn't flash any drivers or fixes. My previous rom is miglobe. I flashed cm14.1 firmware first than rr rom and pico gapps.
Sent from my redmi note 4 using tapatalk
Click to expand...
Click to collapse
first the firmware original, after cm 14.1 and last rr? Are wipes making?
Edinsonpol said:
first the firmware original, after cm 14.1 and last rr? Are wipes making?
Click to expand...
Click to collapse
No..wipe data and system then flash CM14.1 firmware (cm-14.1-mido-firmware-20170430),RR ROM and gapps.
Sent from my Redmi Note 4 using Tapatalk
Edinsonpol said:
first the firmware original, after cm 14.1 and last rr? Are wipes making?
Click to expand...
Click to collapse
If you're on MIUI, go to about phone & tap kernel version 7-8 times simultaneously. There's an option to check camera sensor then.
I guess devs won't goodix fp source from xiaomi. Does that mean goodix users won't get fp support on oreo? Its been two months, oreo builds are are stable, just without goodix support.
buddy i am using nitrogen oreo on kenzo & my fp is working like charm no issue.
saifuk said:
buddy i am using nitrogen oreo on kenzo & my fp is working like charm no issue.
Click to expand...
Click to collapse
Because you have FPC fingerprint sensor.
Goodix still hasn't got support for oreo. Bad luck for goodix users i can say as it had happened for nougat also but later support was added. So just wait until any dev does that.?
I have faith in Billchen
I thought all mi a1 have goodix
mark2k81 said:
I thought all mi a1 have goodix
Click to expand...
Click to collapse
This is Kenzo forum.
asakurato said:
Because you have FPC fingerprint sensor.
Click to expand...
Click to collapse
nooooo.in all oreo roms , except RR & AEX roms,goodix working fine.
Hello Guys
Guys is there any stable MIUI 10 Nougat based port ROM available for Redmi note 3 Kenzo ? There should be no bugs like camera not working, Fingerprint sensor issue, Volte for both sim slots. If anybody tried MIUIPro 10 By Kisasanya then please do reply with your experience.
Thanks
buy his service then you will receive updates
Crayvolt said:
buy his service then you will receive updates
Click to expand...
Click to collapse
"service" is how we call to sell proprietary firmware illegally nowadays?
Crayvolt said:
buy his service then you will receive updates
Click to expand...
Click to collapse
So now we have to pay for ROMS ...... Sounds quite interesting
check this out miui10 for kenzo everything works really good with smooth ui. Just change dpi to 400 it looks too zoomed in otherwise.
https://t.me/CB_nTu21/3445
Crayvolt said:
buy his service then you will receive updates
Click to expand...
Click to collapse
samueljeba said:
check this out miui10 for kenzo everything works really good with smooth ui. Just change dpi to 400 it looks too zoomed in otherwise.
https://t.me/CB_nTu21/3445
Click to expand...
Click to collapse
Already tested bro there are some bugs like camera, fingerprint sensor and volte so switched back to official miui
Yes
Pronoob said:
Hello Guys
Guys is there any stable MIUI 10 Nougat based port ROM available for Redmi note 3 Kenzo ? There should be no bugs like camera not working, Fingerprint sensor issue, Volte for both sim slots. If anybody tried MIUIPro 10 By Kisasanya then please do reply with your experience.
Thanks
Click to expand...
Click to collapse
Direct Download MIUI 10 Nougat For Redmi Note 3 Kenzo From Here - https://doc-0o-2k-docs.googleuserco...2381230&hash=2f89f75cc5fv4rl52h365uga9f9pjb0j
I am already using it no volte ,camera ,fingerprint bug
Nikunj Khangwal said:
Direct Download MIUI 10 Nougat For Redmi Note 3 Kenzo From Here - https://doc-0o-2k-docs.googleuserco...2381230&hash=2f89f75cc5fv4rl52h365uga9f9pjb0j
I am already using it no volte ,camera ,fingerprint bug
Click to expand...
Click to collapse
this page say no authorisation
soumyaprakash said:
this page say no authorisation
Click to expand...
Click to collapse
May be link is revoked
Pronoob said:
Update V2 - Miui 10_port_kenzo_7.0 ROM by Dev Hailapas:
Build Date-: 08/08/2018
Changelog-:
=>fix video Recording in stock cam
=>interface new camera
=>Inbuilt Root v16.6 magisk
ROM Link:
Link: Mod edit, link removed.
miui version: Miui 10 8.7.5 Beta
Android Version: Nougat 7.0
File size: 998 mb
Bug: fix does not apply to 3rd party theme
Click to expand...
Click to collapse
I tested now. Camera works perfectly, super smooth ... but:
- 4G LTE doens't work (in build 08/07 by WuFeng works) - Brazil - It works after reboot.
- Fingerprint doesn't work properly, unlock after 2s at 3s when screen's lock on. (in build 08/07 by WuFeng 4s to 5s)
- App Lock by MIUI doesn't work with fingerprint. (in build 08/07 by WuFeng too doesn't work)
thanks.
leonardobg7 said:
i tested now. Camera works perfectly, super smooth ... But:
- 4g lte doens't work (in build 08/07 by wufeng works) - brazil - it works after reboot.
- fingerprint doesn't work properly, unlock after 2s at 3s when screen's lock on. (in build 08/07 by wufeng 4s to 5s)
- app lock by miui doesn't work with fingerprint. (in build 08/07 by wufeng too doesn't work)
thanks.
Click to expand...
Click to collapse
fingerprint and volte is the main issue ...... Volte is playing hide n seek
Pronoob said:
fingerprint and volte is the main issue ...... Volte is playing hide n seek
Click to expand...
Click to collapse
Yes. :/
Fixing this, I will use this rom daily.
What I mean is his time and his brains
I think
No free now a days
It seems Redmi will die soon
Miui 10_hydrogen_To_kenzo_port_v8.7.11
Changelog-:
=>Face unlock added.
ROM Link:
http://link4win.com/jdcsO0
anyone tried this ? if yes please review
Pronoob said:
Miui 10_hydrogen_To_kenzo_port_v8.7.11
Changelog-:
=>Face unlock added.
ROM Link:
http://link4win.com/jdcsO0
anyone tried this ? if yes please review
Click to expand...
Click to collapse
I'll try it.
Some news about fingerprint?
leonardobg7 said:
I'll try it.
Some news about fingerprint?
Click to expand...
Click to collapse
Sorry bro no info about fingerprint till now
Delete thisss
banikgames said:
Delete thisss
Click to expand...
Click to collapse
what ?
Pronoob said:
what ?
Click to expand...
Click to collapse
Nothing... I say different
Miui 10 kenzo to hydrogen port by Alexanrin
Build Date-: 15/07/2018
https://link4win.com/ZnoX6iHi
Anyone who can test this and review ?