GT-I9300 - dont work - Galaxy S III Q&A, Help & Troubleshooting

A Hello,
I´m from Portugal and i have a smartphone GT-I9300.
It´s with an official rom but, with the update of firmware to 4.3 he just go erronius and now just play logo and nothing more. In recovery mode, i can´t do nothing, (Wipe / factory, nothing...) in download mode, it craches with kies, kies3, odin 3.7 untill 3.11. I tryad adb but it says "error: closed". it´s not rooted. so, i think in move on to root and install cyanogenmod (I have that in my GT-I9505 withaout problems).
Can any person help me? i will post some photos.:.

@2000hdi: before flashing any custom-ROM, you need a working firmware. So go to sammobile.com and download your correct 4.3-firmware and corresponding Odin and Win-drivers. Deinstall all KIES, Odin, Samsung-things on your PC. Follow the short instructions from download-site exactly. Use USB-port on mainboard. If Odin still doesn't recognize your phone, change USB-cable.

USB ok
Hello again ,
My USB cable, port, its ok, he recognises in odin but during instalation craches. In kies, he download the firmware but during instalation, frozes on 0%.
How can i put some photos to demonstrate?

Forget KIES. Post the Odin-log (text).

<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin engine v(ID:3.1101)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

A friend told me about a file: pit 512 from the days he have is I9300 with the same problem and to use a oldest odin version like 3.1... but, i dont now...

Your partitions seem to be gone. Try Repartition, for 4.3. If this doesn't work, your NAND is gone.

Link to 4.3 down. In the others files i flashed, i used to test the repartition button. In case of nand. What to do?

...to say goodbye
Still another German source. If you know the procedure, you'll find the download-files though.

Great...

@2000hdi: done?

rp158 said:
@2000hdi: done?
Click to expand...
Click to collapse
Nop, i will have to buy a new motherboarder...

after PC use
Hello again, the photos are the result of using a pc XP, instead of a portable because the USB ports on motherboard, original cable and Odin 3.12. Can anyone explain what is the problem now and possible fix? Thanks.

Oficial firmware from sammobile

Related

Galaxy S3 SCH-I535 Bricked

Good night every one, i made a biig mistake . I tried to unlock the bootloader of my Galaxy S3 SCH-I535 with EZ-Unlock, then i shutted down the phone and after that the phone wont turn on. Can connect to Odin, but i cant flash anything is there any way to wake it up?
In Odin every time i try to flash something it stays like this:
<ID:0/021> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> VRALEC.bootchain.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/021> Odin v.3 engine (ID:21)..
<ID:0/021> File analysis..
<ID:0/021> SetupConnection.
Sorry about my english, hope that you guys get my point.

[Q] S3 rooting + flashing, not working in Odin (PIT error)

Hi,
I've got a question about the Samsung Galaxy S3 (i9300). Before this issue it was completely original (not rooted or anything like that).
A few dags ago the phone didn't start. The battery was full (of course), the Samsung logo (with the device type etc, not the animated logo) appeared but it did nothing else. I've waited a long time, and still nothing has happened. So I Googled a lot on many sites on how to fix this problem.
I ended up with the solution 'Flash the stock ROM', so I went to sammobile (and later to samsung-updates.com) to find the original stock ROM, created by Samsung.
I found it, and tried to flash it (I put the phone in download mode (device info in the left upper corner), and the downloadmode is enabled, and I received a notification in Odin (I tried v1.85 and I'm using v3.09 right now) that says 'Added'.
This stock ROM (flashing-process) didn't work so I kept on Googling and found some solutions. I've downloaded custom ROM's and tried to download ClockworkMod recovery (I wanted to install this so I could wipe the phone and reinstall the stock ROM). Unfortunatly it didn't work.
This is the error that I get from Odin (when trying to flash the Stock ROM):
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBUGNL1_I9300ZTOUGNK2_I9300UBUGNK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Erase...
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I also tried to install CWM Recovery with Odin, but I ended up with another error (as you can see in the PNG file that I uploaded with this thread).
Can anyone help me with restoring this phone to factory settings (and stock ROM)?
Thanks in advance!
Explanation for the screenshots (uploaded to this thread):
screen1.png: different files that I tried since the first ones didn't work (PIT files, ROM'S and CWM Recovery).
screen2.png: attempt to flash Stock ROM.
screen3.png: error after flashing Stock ROM.
screen4.png attempt to install CWM Recovery.
Seems, that you must rebuild your partitions. Look here.
rp158 said:
Seems, that you must rebuild your partitions. Look here.
Click to expand...
Click to collapse
Hi,
Thanks for your reply.
I downloaded the ZIP file from Mega, and unpacked in (and configurated it exactly like in his screenshot), but I can't find the PIT file.
Any idea where I can find that?
Without the PIT file I'm getting an error.
When I download another PIT file from the internet for this device, I get this error: (FYI: I tried 3 different PIT files):
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300OXAGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Can't open the specified file. (Line: 1992)
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks in advance!
CB95 said:
Hi,
Thanks for your reply.
I downloaded the ZIP file from Mega, and unpacked in (and configurated it exactly like in his screenshot), but I can't find the PIT file.
Any idea where I can find that?
Without the PIT file I'm getting an error.
When I download another PIT file from the internet for this device, I get this error: (FYI: I tried 3 different PIT files):
Thanks in advance!
Click to expand...
Click to collapse
There are two versions 4.1.2 and 4.3 the pit file is in the 4.1.2 download but can be used on both roms
tallman43 said:
There are two versions 4.1.2 and 4.3 the pit file is in the 4.1.2 download but can be used on both roms
Click to expand...
Click to collapse
Hi,
Thanks for your quick reply. I really appreciate it.
I downloaded the 4.1 version en copied the mx.pit file to the 4.3 directory.
When I configure everything exactly like the screenshot (in the other thread, link is in first post in this thread), I still get an error:
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300OXAGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I attached an screenshot of my Odin configuration, could you please take a look at that?
Thanks in advance!
CB95 said:
Hi,
Thanks for your quick reply. I really appreciate it.
I downloaded the 4.1 version en copied the mx.pit file to the 4.3 directory.
When I configure everything exactly like the screenshot (in the other thread, link is in first post in this thread), I still get an error:
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_I9300OXAGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I attached an screenshot of my Odin configuration, could you please take a look at that?
Thanks in advance!
Click to expand...
Click to collapse
Yep it failed on Re-Partition (pit file) looks like you may need service repair. Try using Odin 1.85 from here >> http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539 << If fails service repair recommended.
tallman43 said:
Yep it failed on Re-Partition (pit file) looks like you may need service repair. Try using Odin 1.85 from here >> http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539 << If fails service repair recommended.
Click to expand...
Click to collapse
Thanks for your reply.
What do you mean by that (service repair)?
Should I use Odin 1.85 to flash it, or do you mean that the phone is broken and need to be repaired by Samsung?
Another question: in Odin 3.09 there is an option (checkbox) that says 'NAND Erase', should I check this while following the tutorial (first reply on this thread)?
Thanks!
CB95 said:
Thanks for your reply.
What do you mean by that (service repair)?
Should I use Odin 1.85 to flash it, or do you mean that the phone is broken and need to be repaired by Samsung?
Another question: in Odin 3.09 there is an option (checkbox) that says 'NAND Erase', should I check this while following the tutorial (first reply on this thread)?
Thanks!
Click to expand...
Click to collapse
DO NOT CHECK NAND ERASE!!
Service repair ie get Samsung or a service repair shop to fix it.
tallman43 said:
DO NOT CHECK NAND ERASE!!
Service repair ie get Samsung or a service repair shop to fix it.
Click to expand...
Click to collapse
Thanks for your reply.
I tried to flash it with Odin 1.85, and I got the following error:
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXAGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When I tried to flash the firmware version 4.1.3, I got this error (Odin 1.85):
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXAEMG4_KOR_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So it looks like I should contact a repair center.
Anyway, thank you all for your replies and help, I appreciate it!

plz help g530fz stuck on firmware upgrade encountered an issue

hi all
i hope someone can help me
my phone g530fz not working and stuck at firmware upgrade encountered an issue.
at first my phone was stuck at samsung logo and when go to recovery ad try to wipe data it say invalid argument and failed
i download firmware and flash with odin and phone work good ,but there was pattern and i dont know it .
i try to wipe data with recovery but its show many red words failed ,invalid ............. and pattern still
so i think recovery is the problem . i download 2 recoveries and flash it with odin i think its custom and then phone dont boot to recovery again.
now phone stuck at firmware upgrade encountered an issue. i try to flash firmware but it fail odin say
<ID:0/048> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G530FZXXU1ANL7_CL317414_QB3379585_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G530FZXXU1ANL7_CL317414_QB3379585_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_G530FZXXU1ANL7_CL317414_QB3379585_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXX_G530FZOXX1ANL4_CL327389_QB3452640_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/048> Odin engine v(ID:3.1005)..
<ID:0/048> File analysis..
<ID:0/048> SetupConnection..
<ID:0/048> Initialzation..
<ID:0/048> Set PIT file..
<ID:0/048> DO NOT TURN OFF TARGET!!
<ID:0/048> FAIL!
<ID:0/048>
<ID:0/048> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/048> Removed!!
its rom 4 files and try other rom and say same thing .
plz i need help
​
no one can help me ???
You need the pot file, my mother has a g530fz and it is dead now, i need for her phone the pit file, but nobody has it.
Sent from my SM-G901F using XDA Free mobile app

Samsung S5690 (Galaxy Xcover) Boot loop (Samsung animation logo)

Hi,
This device has the android stock rom (don't know which version) and the stock recovery.
Tried to flash it via odin but no hope, always getting FAIL message. tried all versions of ODIN, even with PIT file, but same results.
Could it be a hadware issue (NAND defective ?).
Any help appreciated.
What caused the bootloop? What part of the flash is it failing on? Not knowing what version was on it before would probably be why you are having issues with reloading the original firmware. The firmware you load in Odin should be the same version or newer and from the correct region or carrier, if it is specific to one. Very unlikely it is a hardware issue.
es0tericcha0s said:
What caused the bootloop?
Click to expand...
Click to collapse
Don't know (device belongs to a friend, he said a virus caused the bootloop-not right IMO-)
es0tericcha0s said:
What part of the flash is it failing on?
Click to expand...
Click to collapse
Odin3 v1.83 - v3.04 :
<ID:0/014> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-S5690_Bootloader_XXKL1.tar.md5 is valid.
<OSM> GT-S5690_PDA_XXKL1.tar.md5 is valid.
<OSM> GT-S5690_Phone_XXKL1.tar.md5 is valid.
<OSM> GT-S5690_CSC_PROKL1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Set PIT file..
<ID:0/014> DO NOT TURN OFF TARGET!!
<ID:0/014> Complete(Write) operation failed.
<ID:0/014> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Odin3 v3.07 - v3.10:
<ID:0/014> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-S5690_Bootloader_XXKL1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-S5690_PDA_XXKL1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-S5690_Phone_XXKL1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-S5690_CSC_PROKL1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/014> Removed!!
<ID:0/014> Added!!
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
es0tericcha0s said:
Not knowing what version was on it before would probably be why you are having issues with reloading the original firmware. The firmware you load in Odin should be the same version or newer and from the correct region or carrier, if it is specific to one. Very unlikely it is a hardware issue.
Click to expand...
Click to collapse
So I must try with every available firmware out there ?
Firmware used:
GT-S5690_XXKL1_XXKL1_PROKL1_home (Includes: (Bootloader, CSC, PDA, Phone) Files)
gt-s5690_xxld3_xxld3_neekk8_home (Includes: (CSC, PDA, Phone) Files)
gt-s5690_xxlg3_xxlg3_dbtlf1_home (Includes: (CSC, PDA, Phone) Files)
Stock Recovery:
E:failed to mount /data (Invalid argument)
-- Applying Multi-CSC --
Note: even a hard reset does nothing (obviously).
Any solutions guys

Having Trouble Updating Firmware on S9+

Hello, I am trying to update the firmware on my phone.
Bottom line up front is that I'm getting the:
"<ID:0/006> Can't open the serial(COM) port" from Odin.
I've read this is usually a communications issue, but I'm curious why I can connect the PC to the phone when the phone is in it's normal mode and move files between the PC and the phone, but it seems to have a connection problem when Odin is running.
I'm looking for any suggestions to be able to complete the update.
Details follow:
The phone is an Galaxy S9+ G965U
Product code VZW
I am trying to install:
G965USQS8FTJ6
When I run Smartswitch, it claims the device is up to date and no update is required.
When I check for a system update on the phone, it says it is up to date and no update is required.
I used Frija to download the lastest firmware:
SM-G965U_2_20201106184604_qnk441l2qh_fac.zip which is Android 10, Product code VZW.
System update history shows G965USQS7CSK4.
The baseband version g965usqs7csk4
I start Odin on the PC.
I reset phone to Odin mode.
One thing to note is that the Odin display on the phone screen is normal brightness for a moment and then it dims.
"KG STATUS: Checking" never changes.
The ID:Com lights up blue "Added!"
I Add BL, AP, CP, CSC, USERDATA to Odin fields
I am using the original cable included with the phone.
I can connect the phone to my PC and move files on/off phone.
Odin text string from failed attempt:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1401)..
<ID:0/006> File analysis..
<ID:0/006> skip file list for home binary
<ID:0/006> apdp.mbn
<ID:0/006> msadp.mbn
<ID:0/006> persist.img.ext4
<ID:0/006> dqmdbg.img.ext4
<ID:0/006> carrier.img.ext4
<ID:0/006> userdata.img.ext4
<ID:0/006> Home Binary Download
<ID:0/006> Total Binary size: 5597 M
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
If I remove and insert USB to phone, while Odin is running, Windows claims USB device not recognized.
If I remove and insert USB to phone, while the phone is in it's normal mode, Windows immediately recognized the device and opens file explorer.
I'm curious why I can connect the PC to the phone when the phone is in it's normal mode and moves files around, but it seems to have a connection problem when Odin is running.
I have enabled developer mode.
I have turned on USB debugging.
OEM debugging is not yet available. I don't know if I need this or not for a Samsung released firmware version.
Phone information shows:
One UI: 1.0
Android Version 9
Baseband Version G965USQS7CSK4
Service Provider SW version: SA)MC_SM-G965U_OYN_VZW_PP_0050
VZW/VZW/VZW
I removed the Samsung USB driver from PC and reinstalled the latest (1.7.23.0, I hope).
I've read that USB 3.0 can be a problem, and USB 2.0 is preferable but my PC only has USB 3.0. Has anyone had success with USB 3.0?
I've tried this with Odin 3.11.1, 3.12.7, 3.13.1, 3.14.1, 3.14.4 because I read that sometimes a different version of Odin will succeed where another failed.
I have uninstalled KIES and restarted the PC so I know KIES is not running.
"Verizon Wireless Software Upgrade Assistant - Samsung" is not running
"Verizon Wireless Software Utility Application for Android - Samsung" is not running.
"Smart Switch" is not running.
Thank you in advance for suggestions.

Categories

Resources