I love this phone....there, I said it. But it's driving me crazy.
I bought it from a Chinese retailer, who shipped it with X821 firmware, but the box states that it's an X820. I doubt there is any difference in the hardware.
I would have left everything as it was, but I can't seem to make phone calls (don't have a data plan yet...yeah, I know....) with anything other than 2G, and that is about to go extinct. When I set it to WCDMA, it shows a UMTS connection, with no carrier designation, but the tower is the same one I connect to with 2G. The phone does sometimes show an AT&T 3G connection in the status bar, but I can't make calls, even though I have full signal. When I place the same SIM in my old HTC Inspire, the same monitoring app shows "UMTS - AT&T HSDPA+" and works just fine.
I'm at my wits end. I have rooted, installed TeamSpain recovery, replaced the firmware with the X829 and even tinkered with the frequency configurations through DFS Studio (which did a lot of complaining, and I'm still not sure if the changes stuck 100%). I also played with APN settings and tried the SIM in different slots, both alone, and with another SIM. And after all of that, still no progress in getting this phone to use a 3G or 4G connection to make calls. If I don't set it to "GSM only", no phone calls in or out. I'm essentially right under a tower, so signal shouldn't be an issue.
If anyone is using the same provider in the US, and is not having these kinds of issues, I'd really appreciate hearing what firmware you are using, and/or what you did to get things working.
I am using it on x820 with official stock 0.17s firmware, and did a dirty flash to cuoco92's 17s firmware. Everything works including HD voice calls, and full LTE.
xterminater07 said:
I am using it on x820 with official stock 0.17s firmware, and did a dirty flash to cuoco92's 17s firmware. Everything works including HD voice calls, and full LTE.
Click to expand...
Click to collapse
I tried this, as well as the Remix ROM. In fact, I think I've tried just about everything, without success. At one point, I had one of the apps indicating a 4G connection, but the phone diagnostics showed GSM (2G). Even the apps aren't all sure what to make of what's going on with the connections reported by this phone.
Currently on the cuoco92 v35 ROM. When WCDMA is enabled, I see simply a good UMTS connection , sans carrier name, in the "Network Cell Info Lite" app, and no ability to make calls. I also often (but not always) see the "AT&T 3G" sign. 4G or LTE never shows at all, even though the diagnostics show that the phone is communicating with an LTE transmitter, when preferred network is set to "unknown". It won't even let me set things like "LTE only".
Any chance you could set your phone to WCDMA and see what the "Network Cell Info Lite" app shows you? Anyone else with this phone on AT&T?
BTW, I am now using a data plan, which I thought might make a difference. It doesn't. EDGE data only for me . New SIM card is on the way, but my hopes aren't high.
Is it possible for a Chinese seller to have borked the phone so thoroughly with their x821 ROM (it's an x820 marked phone), that it keeps any subsequent radios from flashing properly? I don't know how/why it would work for some and not others.
Starting to really dislike this "phone"......it's more of tablet at this point.
Thanks.
I think APN is not set for AT&T
try this:
"Main steps
To use data services on our network with a non-AT&T device, you may need to program the data settings. The sections below provide the correct settings and steps for programming based on your device type and operating system.
.
Access the Settings menu.
Locate and select Wireless & Networks or More Networks.
Select Mobile Networks.
Select Access Point Names.
Locate and select the option to add a new APN. This is usually accessed by a + symbol on the screen or by tapping the menu button.
Program each field using the settings below.
Save the changes to return to the APNs menu and select the new APN.
Name ATT Phone
APN phone
Proxy Not set
Port Not set
Username Not set
Password Not set
Server Not set
MMSC
MMS proxy
MMS port
MCC 310
MNC 410
Authentication Type None
APN type default
APN protocol IPv4
Bearer Unspecified
Note: If you are unable to program your device following the steps above, refer to your user manual or contact the manufacturer for assistance."
Cadet_C said:
I think APN is not set for AT&T
Click to expand...
Click to collapse
Thanks, but I wish it were so simple. I have tried this, and other APN settings. None work to get this phone to be usable on anything other than 2G.
I just received and activated the replacement SIM. Still no improvement. While typing this, I have Network Cell Info Lite app running, and with the Set Preferred Network Type showing "Unknown" in the phone's diagnostic screen, It will switch randomly between "EDGE AT&T" (which works fine) and "UMTS -" (which is useless). Both have strong signals. For a split second before it switched to "UMTS-", the app showed "GPRS AT&T", but only for a split second before it kicks over to "UMTS-".
I wish someone using this "phone" on AT&T in the US, would run this app to compare notes. It may be that that the phone works fine on a full implementation of LTE (i.e. in locations where AT&T have already deprecated 2G) but not in other areas. Still, that doesn't seem to explain why this phone seems unable to register on the same 3G network, used easily by my other phone, with the very same APN settings and SIM.
You would have to call att and check if they turned our phone on to use lte. If your phone is not "registered" as an LTE capable phone it wouldn't be able to pick it up. This phone has all the bands needed for AT&T because I am using it now. All LTE work straight out the box, and i'm on the latest 19s cn rom
xterminater07 said:
You would have to call att and check if they turned our phone on to use lte. If your phone is not "registered" as an LTE capable phone it wouldn't be able to pick it up. This phone has all the bands needed for AT&T because I am using it now. All LTE work straight out the box, and i'm on the latest 19s cn rom
Click to expand...
Click to collapse
I'm a bit confused. Is this what you did to achieve proper function of this device? I.e. calling AT&T and getting them to do this for you? My conversation with their tech person didn't seem to bear fruit in this regard.
Also, which slot do you have the SIM card in? I've used the stock 17s and now on cuoco92 v35 ROM. There definitely seems to be a difference in how the network settings behave, based on the location of the SIM. At one point, after selecting BAND 6 (when it would let me), the phone showed a constant "AT&T 3G" connection, but it was useless. No calls and no data.
Related
Anyone try this? Windows Phone on Straight Talk?
Mobile data (internet) works perfectly fine (and fast!) but I can't connect to live services . . . which kills the user experience of a Windows Phone. The Live services work over wifi, but when there is no wifi connection, the services, including marketplace, bing search, scout, etc simply refuse to connect.
Any thoughts on how I can correct this? I've tried everything I can think of and spent hours searching to no avail.
Any help is much appreciated.
Hi, I have the Lumia 800 on Straight talk and everything works perfect.
Make sure the apn setting are good.
Is Straight talk a network that gives you SIM card and no phone?
If it's a network that uses some other carrier's masts i.e. O2, Vodafone for example, then there is a solution to it.
How do you get your APN settings on your phone? Do you enter it manually?
Here is what will help you:
Once you connect to wifi to do whatever you wish and you complete using wifi, go to your network settings, mobile settings, then edit apn - enter your APN settings manually. I am not sure what Straighttalk APN settings are but you would surely find it somewhere.
After saving the APN settings, restart your phone but make sure wifi is switched off before you restart.
After the restart you will be able to use Live services with 3g.
However as soon as you reconnect to wifi, you will have to re-do the whole cycle each time in order to get Live services working on 3g again.
This might or might not work. I had exactly same issue on giffgaff. I have spent 3 months trying to figure out, flashed ROMs, hard resets, swapped carriers etc and finally have found this to be the way it works. I own a HTC Titan. Till today I thought, it was HTC's fault because I have ruled out carrier and MS for this. But if the above works for you then, it clearly isn't HTC's or carrier's fault but sure OS that keeps forgetting the APN. The reason this happens is because Straighttalk in your case and Giffgaff in my case, DO NOT have APN settings stored on their SIM cards. The OS doesn't seem to be configured to remember it. Ideally when you swap from wifi to 3g, your OS shouldn't have to read your SIM. However WP in current state seems to be reading SIM everytime you swap from wifi to 3g. However, when it can't find anything on the SIM i.e. APN settings, the live services won't work.
If this works, please please please drop me a PM as I don't use this Lumia forums at all. I have a Titan, so I wouldn't know. But if this works, I will have to write to WinPhone Support with whom I've been conversing for about a month now!!
palmbluetooth said:
Hi, I have the Lumia 800 on Straight talk and everything works perfect.
Make sure the apn setting are good.
Click to expand...
Click to collapse
Mind sharing what settings you're using? Also, are you using WP's built in APN tool or Nokia's Network setup?
APN is: att.mvno (all other fields are empty).
Using the built in WP APN under cellular in settings.
Tried the Nokia but it messed up the phone so I took it out.
Let me know if this helps.
I'm using my 800 on StraightTalk and have had the same issue. I found there are essentially 3 places where the APNs can be set up, and reboots must occur at the right time. (Win settings, ##634#, and Nokia tool)
it seems to be overly sensitive as to how they are configured. I must have reset this thing at least a half a dozen times before getting it to work. Ultimately, I ended up with the settings in all 3 places, but the sequence I did it in is Win Settings (network APN), ##634# (both network and MMS settings), a reboot, and then download the Nokia tool via WiFi and use it to enter the settings there for both network and MMS followed by another reboot. That issue is most definitely related to the APN settings, but I'm not quite certain why I had to do the hokey pokey to make it work. None-the-less, I hope this helps a little. Once you get it working, it seems to stick through reboots, wifi, or pretty much anything except swapping out the SIM card, which hosed everything up again.
mowrangler said:
I ended up with the settings in all 3 places, but the sequence I did it in is Win Settings (network APN), ##634# (both network and MMS settings)
Click to expand...
Click to collapse
Interesting. . . There doesn't seem to be anywhere to do that in the most up to date version of the diagnostics tool. (I know they changed a few things in the most recent update.)
I may have to restore to a previous version . . .
Thanks
mowrangler said:
I'm using my 800 on StraightTalk and have had the same issue. I found there are essentially 3 places where the APNs can be set up, and reboots must occur at the right time. (Win settings, ##634#, and Nokia tool)
it seems to be overly sensitive as to how they are configured. I must have reset this thing at least a half a dozen times before getting it to work. Ultimately, I ended up with the settings in all 3 places, but the sequence I did it in is Win Settings (network APN), ##634# (both network and MMS settings), a reboot, and then download the Nokia tool via WiFi and use it to enter the settings there for both network and MMS followed by another reboot. That issue is most definitely related to the APN settings, but I'm not quite certain why I had to do the hokey pokey to make it work. None-the-less, I hope this helps a little. Once you get it working, it seems to stick through reboots, wifi, or pretty much anything except swapping out the SIM card, which hosed everything up again.
Click to expand...
Click to collapse
I just activated my Straight Talk SIM yesterday (I was on T-Mobile's EDGE connection) and used Nokia's Network Setup tool to add, and make current, a new APN with att.mvno under the Internet APN's 'name' field. That's all I did, and data works fine (surprisingly, even on the RM-801 which doesn't have AT&T's 850MHz band).
jenesuispasbavard said:
I just activated my Straight Talk SIM yesterday (I was on T-Mobile's EDGE connection) and used Nokia's Network Setup tool to add, and make current, a new APN with att.mvno under the Internet APN's 'name' field. That's all I did, and data works fine (surprisingly, even on the RM-801 which doesn't have AT&T's 850MHz band).
Click to expand...
Click to collapse
How is call quality and what are your download/upload speeds. Been debating whether I should get a RM-819 device which is harder to obtain than a RM-801.
I picked up an unlocked TMo One in New York last week. I used it there with my Norwegian SIM with no problems.
Back home, I get "No Service" using the exact same SIM-card. Using the *#*#INFO#*#*-menu, I can see the SIM-card is recognised because it displays my carrier in the "Current Network" field. I am suspecting the TMo-infused Sense OS to reject my card, since to my understanding the phone is compatible with EU networks. Will i be fine if i flash another ROM, like the stock GPe, and get rid of the TMo-stuff altogheter, or is there another rock in the road here?
I used my Tmobile HTC One with the stock ROM in Norway using a Telenor SIM and in Greece using a Vodafone SIM.
I would make sure you have the proper APN info (I can't remember the appropriate one for the Norwegian carriers). I believe it should work without issues (mine did). If it worked with that SIM card already, it's not locked and it's not rejecting it.
Also, I found that when I returned home to the US, I had to choose Settings -> Mobile Data -> Network Operators and choose Select Automatically (even though it was already chosen). Maybe you need to do that too.
Currently I am running Android Revolution and that also works fine with my Norwegian and TMOUS SIM cards.
Good luck!
Thanks! I've at least made some progress. I tried setting Network Selection to automatic, and got reception, however only for about half a minute. I then tried adding my provider's APN info. This has given me permanent data connection, but still no GSM reception for texts and phone calls. I do get 2g data when in low coverage areas. I am finding this weird. Can anyone shed some light?
Okay. Just wanted to post my latest findings - if others are experiencing the same issue. I've flashed the latest Google Edition RUU, to see if the TMo ROM was causing it. But i still don't get GSM coverage. Data still connected on both 2G and 3G (haven't been within 4G coverage yet..)
When flashing I also updated firmware to latest.
Phone info says Current network: "NetCom" (my home network) GSM service: "Emergency Calls only" (I tested this, and I am able to place the call to emergency services) and GPRS service: "Connected" (I am typing this on my data connection via WiFi-tethering, actually)
The status menu shows this: Service state "Out of service" and My phone number "Unknown".
If anyone can come up with a theory, I am all ears..
laberkis said:
Okay. Just wanted to post my latest findings - if others are experiencing the same issue. I've flashed the latest Google Edition RUU, to see if the TMo ROM was causing it. But i still don't get GSM coverage. Data still connected on both 2G and 3G (haven't been within 4G coverage yet..)
When flashing I also updated firmware to latest.
Phone info says Current network: "NetCom" (my home network) GSM service: "Emergency Calls only" (I tested this, and I am able to place the call to emergency services) and GPRS service: "Connected" (I am typing this on my data connection via WiFi-tethering, actually)
The status menu shows this: Service state "Out of service" and My phone number "Unknown".
If anyone can come up with a theory, I am all ears..
Click to expand...
Click to collapse
Have you tried taking the phone to your provider? Maybe you need an update which or setting which they can provide.
I find it strange that it wouldn't recognize your phone number, usually that's a sign of some type of incompatibility with the phone and the network.
Sent from my HTC One using Tapatalk 2
I have contacted my provider to see if there's anything they can do. But they're playing a little hard to get.. I was afraid there would be an issue with compatibility at first, by since my data connection is all right, I'm not so sure. Also erdelyt above here says he has used the TMo phone in Norway without trouble. He has another provider, however. They run their own network, so I will be trying with one of their SIM cards next, if my provider NetCom aren't of any help. Thanks for your help so far. I'll be posting my findings further!
So, I got to try a Telenor SIM card the other day, and the issue is still there. Although, with that card the phone number was read and displayed in the phone info menu. The owner of the card suggested there was an unlock issue - but I did make calls with my phone and SIM card in the US, so I don't see how that could be.
So that's a small step further, but now I just have to wait to see what my carrier says..
I changed the title for this thread after my findings.. I got a new SIM-card for my carrier, and i got coverage to make one phone call, but after i hung up, it was gone. I am really in the dark here.. It can of course be a hardware fault, but that's a bit strange for an entirely new product..
Here's the deal, I bought my Rezound in 2012 and flashed it to PagePlus Cellular using CDMA WS.
I've used it and it's been fine, running CM10 most of the time. I just bought a Evo 4G LTE and switched to that. So I RUU'd my Rezound, and it says a SIM card is required, etc.. but there are no signal bars.
I go into About Phone > Network >
and Operater name is "Unknown," signal strength is "0", service state is "out of service."
Now, the question is, is that normal? Does the phone need a sim card to connect to verizon towers?
I don't want to sell it while it's not working. I did call up Verizon and they said the ESN was clear for activation though.
So if I sell it and the new user puts in a SIM card, will it clear up all the signal issues? Or have I done the RUU incorrectly? [I did it a couple times because it didn't work the first time (the SD card method, then I did fastboot method)]
Thank you!
That is not normal behavior and you may need to do some more work before you sell it.
Make sure all related network settings are correct for Verizon instead of GSM under Settings > Mobile Network menu.
Try entering on the stock dialer *#*#4636#*#* to access the hidden testing menu as well for the phone radio and verify it is on CDMA. If that code doesn't work on the dialer try it via an app like "Hidden Menus" or even "Battery Monitor Widget" by 3C (click "Tests" icon > Phone information from main page of app.)
Background: I broke off of my Verizon contract six months in and used my phone as a WiFi-only device (VoIP and internet texting apps) for the longest time. While I typically hid my signal icon and ran the phone in Airplane mode with WiFi toggled back on, I would occasionally turn my radio on to resync time and date to the cellular network. With no SIM in it clearly was syncing off Verizon CDMA signal still; I simply wasn't fully activated on the network any longer.
I just made the StraightTalk AT&T SIM card plunge the past couple of weeks and did an NV edit in CDMA WS as well, all alright on GSM. I am on the stock global ICS ROM at the moment, one I know could sync time on CDMA before. However, I cannot get the phone to switch off of GSM even in the hidden testing menu, even without SIM in... Likely has to do with the NV edits I made, and perhaps that may be your case too.
You *could* repurpose the sale as a GSM enabled unit... If it was even set up and working well as such. But due to the current technical issues of getting GSM mobile data above 2G I'd suggest to get it fixed and working back on stock CDMA for the consumer's sake if you can. Again AFAIK It should pick up a CDMA signal even without active service or the Verizon LTE SIM in, did so for over a year lol.
PhantasmRezound said:
That is not normal behavior and you may need to do some more work before you sell it.
Make sure all related network settings are correct for Verizon instead of GSM under Settings > Mobile Network menu.
Try entering on the stock dialer *#*#4636#*#* to access the hidden testing menu as well for the phone radio and verify it is on CDMA. If that code doesn't work on the dialer try it via an app like "Hidden Menus" or even "Battery Monitor Widget" by 3C (click "Tests" icon > Phone information from main page of app.)
Background: I broke off of my Verizon contract six months in and used my phone as a WiFi-only device (VoIP and internet texting apps) for the longest time. While I typically hid my signal icon and ran the phone in Airplane mode with WiFi toggled back on, I would occasionally turn my radio on to resync time and date to the cellular network. With no SIM in it clearly was syncing off Verizon CDMA signal still; I simply wasn't fully activated on the network any longer.
I just made the StraightTalk AT&T SIM card plunge the past couple of weeks and did an NV edit in CDMA WS as well, all alright on GSM. I am on the stock global ICS ROM at the moment, one I know could sync time on CDMA before. However, I cannot get the phone to switch off of GSM even in the hidden testing menu, even without SIM in... Likely has to do with the NV edits I made, and perhaps that may be your case too.
You *could* repurpose the sale as a GSM enabled unit... If it was even set up and working well as such. But due to the current technical issues of getting GSM mobile data above 2G I'd suggest to get it fixed and working back on stock CDMA for the consumer's sake if you can. Again AFAIK It should pick up a CDMA signal even without active service or the Verizon LTE SIM in, did so for over a year lol.
Click to expand...
Click to collapse
in the mobile network, I have it set to "CDMA / LTE" but I tried "CDMA only" and "Global" but none worked.
*#*#4636#*#* didn't work in stock dialer, it just disappeared when I finished typing it.
then I downloaded Hidden Menu, found *#*#4636#*#* in the list, tapped it, and it did nothing. I did some other ones and they did do something. I found htc diag mode, the same one I used to program it originally. I clicked read, and the phone number and min were blank. so I went to the prl and tried flashing a verizon prl file, then rebooted, and still nothing.
I'm going to try to RUU again and hope that solves it.
Update
I RUU'ed again, but still no luck..
Can anyone confirm whether or not, say you got a Rezound out of the box never activated, would you need a SIM card to get the signal initiated? I'm thinking either that's the case and my phone just needs a sim card to jump start it, or my rezound is toast.
My H961N does not allow me to independently set my network band for each sim card. Both my network providers operate on 2G/3G/4G however since I have gotten this V10 I have had inconsistent network usage. At first I would strongly get one network and the other would mostly be on Emergency Calls when indoors depending on where I was. I used the hidden menu code *#546368#*961#-> Field Test -> Modem Settings, from Modem Settins I have tried to set the RAT Selection and the Network Mode however when I check Engineering Mode both sims show the same band if I am on WCDMA Only or GSM Only but neither provider operators on the same band except for one on 3G. If RAT is set to selectively move between two or more frequencies then one sim shows Invalid Band in Engineering Mode. Using Network Mode I have tried to set each sim to different band but both would either show the same band or one would appear invalid under Engineering Mode.
Another Issue I have is I am unable to use data even though I have the correct APN for both of my Network Providers. I have verified that both sims do work when used in another phone, at one point I visited both Providers but none could give me an answer to my issue. One of my Providers did however try and activated a data plan while I was in their office and the V10 did show 3G and received data however upon returning back to my regular surroundings I no longer got any data. I have tried upgrading the V10 to Marshmallow and Nougat but the upgrade did not solve this problem, neither the one I stated before. But on Nougat both my sims did show 3G but strangely only when I have my Wifi active and using a VPN. Currently I am on Lollipop and rooted I considered trying to flashing a qcn, sec and nvm files since I saw a site listing them as fixing network and data issues on this particular phone, I have the files just in case. Any help would be greatly appreciated.
Good day all,
I'm encountering an issue: a fairly new phone of mine (Umidigi F1) loses its ability to get data from Verizon Wireless when I install Treble Generic System Images (AOSP-based, typically derived from phhusson's et al work). For clarification, despite being from a small Chinese company, the phone normally fully supports VZW (4G LTE data, calls, and text). While on those GSIs, I get a signal and am able to call people with it, but there is no data from the connection.
The APN settings appear to match the ones that work normally (stock F1 and a Pixel 2), so despite not being able to edit or add a new one, I am led to believe this isn't the culprit. Next, I looked at build.prop; the model, device, and brand info changed from the default states and I believe that VZW may be strict enough not to allow the altered info on their network. Attempting to modify build.prop causes a boot loop, though.
Anybody have any thoughts on what I can do? One of the comments at the top of the build.prop file indicates that it is autogenerated by buildinfo.sh. Should I attempt to modify that instead? Or maybe something else?
Veiran said:
Good day all,
I'm encountering an issue: a fairly new phone of mine (Umidigi F1) loses its ability to get data from Verizon Wireless when I install Treble Generic System Images (AOSP-based, typically derived from phhusson's et al work). For clarification, despite being from a small Chinese company, the phone normally fully supports VZW (4G LTE data, calls, and text). While on those GSIs, I get a signal and am able to call people with it, but there is no data from the connection.
The APN settings appear to match the ones that work normally (stock F1 and a Pixel 2), so despite not being able to edit or add a new one, I am led to believe this isn't the culprit. Next, I looked at build.prop; the model, device, and brand info changed from the default states and I believe that VZW may be strict enough not to allow the altered info on their network. Attempting to modify build.prop causes a boot loop, though.
Anybody have any thoughts on what I can do? One of the comments at the top of the build.prop file indicates that it is autogenerated by buildinfo.sh. Should I attempt to modify that instead? Or maybe something else?
Click to expand...
Click to collapse
many MTK soc devices on pis gsi have this issue with sim based data connection. Some even have issue with sms / text.
I did at one point have data working on one of my mtk phones, only when switched connection typs to 3G. But that was not acceptable because way too slow speeds. A solution may come. but i do not know when.
umidigi-f1-tag
I just got a umidigi f1 and am trying to get it working on Verizon. I have talk ant text(sms and mms) working through sim1. However, like you I can't get data to work.
The odd thing is that I can't seem edit the apn settings. That section is missing from my mobile networks section. I am on a stock rom, not rooted.
The sim I was using is a page plus sim. It gets service though Verizon via Tracphone.
I think my issue is that my apn is not set correctly.
Success!
Go to the phone dialer and dial
*#*#4636#*#*
Go to phone information and change your preferred network type to lte only
The default is lte/umts which probably just good for GSM phones
You should see a lte connect. Hit the ping test to verify if you can ping Google.com
Edited to say, the phone is kind of flaky with regards to the APN setting so ymmv. It was working for me for a while then stopped...
Edited 2: Okay I figured it out. To reveal the Apn menu on Verizon, change the preferred network to LTE only as above, then unselect 4g in the Mobile Network section for the Verizon Sim. Restart the phone. Next time you go to the Verizon section, there should be an Apn setting item. Create the proper Apn for Verizon because the default probably does not work. For me, I needed tracfone.vzwentp.
Here's the phone info screen
Here's the mobile network section for the Verizon Sim. Nonintuituve but had to disable 4g toggle but doesn't have any effect on speed. After a reboot, Apn section shows up
Hellom did you get it to work on Verizon? If so what are the full steps?
Make sure your Verizon sim card is in slot 1. Sadly, it seems like Verizon works best in that slot so not able to use a micro SD card.
On 2 other phones running on Red Pocket Verizon, everything just worked. No need to do anything extra.
Also disable wifi calling.
On my other phone running on tracfone/page plus, I had to do the extra steps in the previous posts above.