I made the mistake of rooting my phone with KingUser Root. Not Kingo, but the one you can "root" without a PC. At any rate, when the latest Pokemon Go update came out I was unable to play. I tried unrooting with the King software, but it failed. So I tried a method I found online to installe SuperSU over King and then attempted to unroot it with its proprietary software...only to have my phone soft brick and at first it would only boot to the Verizon Splash screen...
So, I downloaded ODIN, downloaded the appropriate files or so I thought and attempted to flash to recover it. Now it won't boot past "Software Updated Failed: please run VZW Software Update Repair Assistant" and that doesn't work either... any tips as to what I can do? I can still use download mode, but recovery mode won't load.
It's the 16 GB VZW SCH-I545 version.
It got stuck here:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl2.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
For me also
Any help ?
Related
Samsung Galaxy 3 Tmobile edition. d2tmo. I am running cyanogenmod 12.(something) and I cant connect to wifi. I cant seem to flash any non lollipop rom, with both twrp and clockwork mod. So I decided Im going to go back to factory settings. So using odin I downloaded the stock firmware and tried to flash it. Odin gives me this
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T999UVALEM_T999TMBALEM_T999UVALEM_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Click to expand...
Click to collapse
I have not been able to flash anything with odin and I suspect there is something in the phone rolling back and changes odin does. I really would like to get this phone working (current rom works but cant connect to wifi). Ive used guides like this one and I have not had any luck so far.
Hey guys, i acidentally wiped the sd card and everything on the phone, and now i tried to flash stock firmware via odin but in the end when its finished it says "FAIL!"..
This is the odin code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> modem.bin
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is the phone bricked or can anyone please help me with this? I tried two different stock firmwares but got the same message on both
Thank you in advance!!
nkewk
"EDIT: I fixed it myself after almost 6 hours of trying. I followed these steps: http://www.s4miniarchive.com/2014/07....img.ext4.html (even tho it is s4mini the advice is still the same) using CWM from http://forum.xda-developers.com/gala...overy-t2923587" (thanks to Nousey)
Hi xda,
Recently I rooted my phone (sm-g925w8 Rogers) using the modified kernel method. Then I tried installing TWRP using the TWRP manager app however this failed and caused my phone to enter a bootloop. Of course, I can't enter recovery and whenever I try flashing a stock firmware it gives me the following error message:
<ID:0/006> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925W8VLU1AOCG_G925W8OYA1AOCG_G925W8VLU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be greatly appreciated!
rpaterno said:
Hi xda,
Recently I rooted my phone (sm-g925w8 Rogers) using the modified kernel method. Then I tried installing TWRP using the TWRP manager app however this failed and caused my phone to enter a bootloop. Of course, I can't enter recovery and whenever I try flashing a stock firmware it gives me the following error message:
<ID:0/006> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925W8VLU1AOCG_G925W8OYA1AOCG_G925W8VLU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be greatly appreciated!
Click to expand...
Click to collapse
Hello,
I have reported this thread to move to right Q&A so the experts there might be able to assist you.
-Vatsal
How about you try to format+downloading the any compatible "Full Rom"
Preferred Stock Rom
NVRAM already back up
............
Ready with your SP Flasht tool best ver 5.xxxxxx
Stock Rom by meant of SP Flashtool
Make sure you have Vcom+USB driver in your PC
Even though it is in a boot loop
Just get your self ready...ie: Rom scatter uploaded into SP Flash
When ever loop cycle end JUSt PLUG IN YOUR EVERREADY unit
Hopefully it will be detected.
---------- Post added at 02:10 PM ---------- Previous post was at 02:07 PM ----------
I did that to my daughter's phone that is Lenovo S850
Using splash tool
Stock rom
Lucky me.....I back up NVram + Imie
Just revive from semi bricked phone
rpaterno said:
Hi xda,
Recently I rooted my phone (sm-g925w8 Rogers) using the modified kernel method. Then I tried installing TWRP using the TWRP manager app however this failed and caused my phone to enter a bootloop. Of course, I can't enter recovery and whenever I try flashing a stock firmware it gives me the following error message:
<ID:0/006> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925W8VLU1AOCG_G925W8OYA1AOCG_G925W8VLU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be greatly appreciated!
Click to expand...
Click to collapse
Try smart switch emergency recovery
Also do u have the same firmware as ur bootloader if not this can cause odin to fail
U could also try flashing just the stock recovery img with odin
I just had this problem now i download samsung smart switch.
1. Install smart switch
2. Click more you will find emergency software recovery.
3. Then it click device initialization.
4. Enter your phone model no that starts with sm.
5. Then ur sn no that is in the box.
6. Enter both and it will start searching and show the steps and u will get the official os for your phone.
Pls note data will be erased.
I stupidly upgraded last night and wasn't completely ready to but did it anyway and I want to go back. I have G925T - T mobile S6 EDGE.
I keep trying to flash the stock rom via Odin and it keeps failing with a binary error. I know I have the correct stock firmware "G925TUVU1AOCG". Tried it while rooted, using smartswitch to put back stock 6.01 and nothing works any suggestions?
***SW REV. CHECK FAIL. Device 3: Binary 1:****
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Anybody???
AFAIK if you updated the bootloader, it will not allow you to downgrade the bootloader again.
Because the stock firmware includes a new bootloader, ODIN tries to flash it, fails and aborts.
Flash a custom ROM instead, if you want to get Android 5 back again.
I'm having trouble with flashing the stock rom for the Samsung Galaxy S3 on Odin, as I get a fail everytime I try to flash the rom onto my device.
This comes up everytime I try to flash:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGOK1_I9300NZCGOK1_I9300XXUGOK1_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The model number is a GT-i9300, and no stock roms so far have succeeded.
I have used Odin 3.07 and Odin 3.09, my samsung drivers are up to date and Odin still fails to flash the rom.
I've also tried different usb cables, along with trying out different ports, none of them have worked.
On the S3 it's currently running TWRP version 3.0.2-1, it also asks me whether or not I keep it "System Read only" whenever I go in recovery mode. And each time I always choose the option of keeping it read only. I don't know if these has anything to do with Odin failing to flash the rom but might as well mention it. I was also running CyanogenMod13 for roughly a month before the brick happened.
Any help would be appreciated !
Reply
Kiddzu said:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGOK1_I9300NZCGOK1_I9300XXUGOK1_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
Click to expand...
Click to collapse
Hi, after NAND Write Start!! and this double !! means it start to WRITE on your Device Flash Memory when this fails it means that the cable dont transfer correct data / Cable Connection OK but wrong cable cannot write correctly on your device
I recommend you to use Original cable when flashing or a other cable but look for the compatibility to devices:good:
as far as I know it cant be a other opportunity to fix this because in the Download Mode of the s3 is the only way to Flash Original Firmware when this fails i dont now how to continue and i cannot help you more than that
And sry for my bad as fu** English