Hey guys, i acidentally wiped the sd card and everything on the phone, and now i tried to flash stock firmware via odin but in the end when its finished it says "FAIL!"..
This is the odin code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> modem.bin
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is the phone bricked or can anyone please help me with this? I tried two different stock firmwares but got the same message on both
Thank you in advance!!
nkewk
"EDIT: I fixed it myself after almost 6 hours of trying. I followed these steps: http://www.s4miniarchive.com/2014/07....img.ext4.html (even tho it is s4mini the advice is still the same) using CWM from http://forum.xda-developers.com/gala...overy-t2923587" (thanks to Nousey)
Related
I tried to unroot but stuck at samsung bootscreen. Im i bricked?
just set the phone in download mode, and run odin multiloader.
Sent from my GT-I9300 using xda premium
Well i did unroot with Odin, the output:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9300_NEE_I9300XXALE8_I9300NEEALE3_I9300XXLE8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Completed..
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/006> Removed!!
Everything went great, but im still stuck at the samsung bootscreen.
Remove battery .
Boot to recovery mode factory reset.
jje
Thank you, it work.
JJEgan said:
Remove battery .
Boot to recovery mode factory reset.
jje
Click to expand...
Click to collapse
Thankyou! It worked for me as well
I have followed all instructions I have seen and can not get it to work. Everytime I press start on odin it starts but then says failed shortly afterwards.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9305_CWM_Recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am a newbie at this and I have no idea what to do but I cant get it to work please help
I made the mistake of rooting my phone with KingUser Root. Not Kingo, but the one you can "root" without a PC. At any rate, when the latest Pokemon Go update came out I was unable to play. I tried unrooting with the King software, but it failed. So I tried a method I found online to installe SuperSU over King and then attempted to unroot it with its proprietary software...only to have my phone soft brick and at first it would only boot to the Verizon Splash screen...
So, I downloaded ODIN, downloaded the appropriate files or so I thought and attempted to flash to recover it. Now it won't boot past "Software Updated Failed: please run VZW Software Update Repair Assistant" and that doesn't work either... any tips as to what I can do? I can still use download mode, but recovery mode won't load.
It's the 16 GB VZW SCH-I545 version.
It got stuck here:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl2.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
For me also
Any help ?
My Samsung Galaxy S5 SM-G900T has failed to flash any firmware for the better part of the past year. No matter which official ROM or which OS version is used (Kit Kat to Marshmallow), the failure continues to occur at Modem.bin. I've tried flashing the modem separately and receive the same error. Due to the incomplete flashing, the phone boots up and remains stuck on the Galaxy screen.
Background: I bought the phone used from a Craigslist user. I brought it to a Samsung "tech" at Best Buy to have an issue worked out; he proceeded to soft brick the phone by attempting to upgrade from Kit Kat to Marshmallow.
I've tried turning off Kies in the background and starting Odin (3.11) in Admin mode, both to no avail. I don't have the original OEM USB cord; I bought one on eBay and used it but had no luck.
Here is the log for trying to flash the modem from the G900TUVU1GQC2_G900TTMB1GQC2_TMB build by itself:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
Here is the log from trying to flash the entire G900TUVU1GQC2_G900TTMB1GQC2_TMB firmware build:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> cache.img.ext4
<ID:0/003> modem.bin
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be greatly appreciated. I've already migrated to another phone but would love to restore this S5 to functionality.
crnel said:
My Samsung Galaxy S5 SM-G900T has failed to flash any firmware for the better part of the past year. No matter which official ROM or which OS version is used (Kit Kat to Marshmallow), the failure continues to occur at Modem.bin. I've tried flashing the modem separately and receive the same error. Due to the incomplete flashing, the phone boots up and remains stuck on the Galaxy screen.
Background: I bought the phone used from a Craigslist user. I brought it to a Samsung "tech" at Best Buy to have an issue worked out; he proceeded to soft brick the phone by attempting to upgrade from Kit Kat to Marshmallow.
I've tried turning off Kies in the background and starting Odin (3.11) in Admin mode, both to no avail. I don't have the original OEM USB cord; I bought one on eBay and used it but had no luck.
Here is the log for trying to flash the modem from the G900TUVU1GQC2_G900TTMB1GQC2_TMB build by itself:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
Here is the log from trying to flash the entire G900TUVU1GQC2_G900TTMB1GQC2_TMB firmware build:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> cache.img.ext4
<ID:0/003> modem.bin
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be greatly appreciated. I've already migrated to another phone but would love to restore this S5 to functionality.
Click to expand...
Click to collapse
Are you sure its the G900T? There are 2 Galaxy S5's for t-mobile..The G900T and the G900T3...When you put it into download mode,it will say at the top which one it is.
bobbylo said:
Are you sure its the G900T? There are 2 Galaxy S5's for t-mobile..The G900T and the G900T3...When you put it into download mode,it will say at the top which one it is.
Click to expand...
Click to collapse
Yes, it says G900T in download mode.
crnel said:
Yes, it says G900T in download mode.
Click to expand...
Click to collapse
Have you tryed just flashing the modem files?What bootloader are you on? I have modem files on my page -->https://forum.xda-developers.com/tmobile-galaxy-s5/general/recent-odin-flashable-bootloaders-t3574276
EDIT:Just noticed,you built this flashable modem yourself?The sequence of flashing does'nt look right...Try flashing the bootloader and modem from my page..And see what happens
bobbylo said:
Have you tryed just flashing the modem files?What bootloader are you on? I have modem files on my page -->https://forum.xda-developers.com/tmobile-galaxy-s5/general/recent-odin-flashable-bootloaders-t3574276
EDIT:Just noticed,you built this flashable modem yourself?The sequence of flashing does'nt look right...Try flashing the bootloader and modem from my page..And see what happens
Click to expand...
Click to collapse
I tried flashing the bootloader and modem via Odin 3.11.1 and got the following:
<ID:0/004> Added!!
<ID:1/005> Added!!
<ID:0/004> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> rpm.mbn
<ID:0/005> sbl1.mbn
<ID:0/005> sdi.mbn
<ID:0/005> tz.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Receive Response from boot-loader
crnel said:
I tried flashing the bootloader and modem via Odin 3.11.1 and got the following:
<ID:0/004> Added!!
<ID:1/005> Added!!
<ID:0/004> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> rpm.mbn
<ID:0/005> sbl1.mbn
<ID:0/005> sdi.mbn
<ID:0/005> tz.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Receive Response from boot-loader
Click to expand...
Click to collapse
OK,just a few things...Have you tryed with a different version of Odin? I'm using odin 3.11.2 on mine..Try that one,then try Version 3.07.Also,in your log,why does it keep adding and removing?Is the usb loosing connection?Also,try removing the battery for a minute,then boot into download mode...Could also be bad cables,i had 2 bad one's once,and it drove me nuts till i got another one...Let me know how it works out after trying these things
Hi my device is S6 Edge G925V (Verizon) and previously on Nouget. My issue is the device is stuck on the verizon logo for awhile then it reboot (it would repeat this cycle forever). Quick backstory to how this happen, I performed a factory reset using the recovery menu and this where trouble started. So far I have downloaded multiple stock firmware from sammobile. I have also downloaded multiple odin version (3.12.7, 3.10.7, 3.10.6, 3.09 droidviews). I have tried multiple cables and port (my laptop only has two). Every time I run the odin program, flash process would always pass but when device reset it would still be stuck at verizon logo. I can still access recovery mode and download mode. I can clear system cache and did factory reset but this led to same result. I just tried again today with Pit file and the result is the same.
Odin Log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> cm.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> cache.img
<ID:0/006> modem.bin
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
I also tried using the samsung smart switch but it doesn't get recognized. I tried to use the emergency software recovery and initialization but I don't have the serial number. I opened the device up and it only has IMEI and SKU.
I'm at my end's wit with this phone atm. Is this issue caused by locked bootloader? Any help would be much appreciated.