I tried to unroot but stuck at samsung bootscreen. Im i bricked?
just set the phone in download mode, and run odin multiloader.
Sent from my GT-I9300 using xda premium
Well i did unroot with Odin, the output:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9300_NEE_I9300XXALE8_I9300NEEALE3_I9300XXLE8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Completed..
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/006> Removed!!
Everything went great, but im still stuck at the samsung bootscreen.
Remove battery .
Boot to recovery mode factory reset.
jje
Thank you, it work.
JJEgan said:
Remove battery .
Boot to recovery mode factory reset.
jje
Click to expand...
Click to collapse
Thankyou! It worked for me as well
Related
Ok just tried to go from cm10.1 to stock but now I'm stuck in a boot loop and I have no idea what to do, here the what Odin said:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXELLA_I9300H3GELL1_I9300NELK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> recovery.img
<ID:0/003> modem.bin
<ID:0/003> tz.img
<ID:0/003> sboot.bin
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
I can go in to download mode if that helps..
I think I found a solution but I'm in the middle of doing it now will post if it worked
http://forum.xda-developers.com/showthread.php?p=38780087#post38780087
You'll have to go to recovery and wipe data. That'll remove everything from the internal SD card, of course, but the phone will boot up. I faced this issue little while ago. This solved it.
Sent from my GT-I9300 using xda app-developers app
read the basics. you have to wipe data when switching ROMs. flash a custom recovery via Odin and wipe data from there, so that it doesn't wipe your internal sd
Hello
I've tried everything regarding an encryption error on my Galaxy SIII, I have tried several stock roms but I always get the same error.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBEMH2_I9300UBEMH1_I9300UVYEMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
It always gets stuck at system.img.
Please help!
ezekiel131 said:
Hello
I've tried everything regarding an encryption error on my Galaxy SIII, I have tried several stock roms but I always get the same error.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBEMH2_I9300UBEMH1_I9300UVYEMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
It always gets stuck at system.img.
Please help!
Click to expand...
Click to collapse
I have the exact same problem. Did you came out with a solution?
Can u boot ur fone? Did u factory reset like it said?
Sent from my GT-I9300 using xda app-developers app
I boot in recovery and download mode. I did not do factory reset like it said. I pressed the power off button.
rennyhernandez said:
I boot in recovery and download mode. I did not do factory reset like it said. I pressed the power off button.
Click to expand...
Click to collapse
Why did u not lol... So u can't boot normally?
Sent from my GT-I9300 using xda app-developers app
I can't boot normally. It freezes in Samsung logo. I tried to reinstall stock flash rom but nothing.
rennyhernandez said:
I can't boot normally. It freezes in Samsung logo. I tried to reinstall stock flash rom but nothing.
Click to expand...
Click to collapse
I've got the same problem.
Hey guys, i acidentally wiped the sd card and everything on the phone, and now i tried to flash stock firmware via odin but in the end when its finished it says "FAIL!"..
This is the odin code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> modem.bin
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is the phone bricked or can anyone please help me with this? I tried two different stock firmwares but got the same message on both
Thank you in advance!!
nkewk
"EDIT: I fixed it myself after almost 6 hours of trying. I followed these steps: http://www.s4miniarchive.com/2014/07....img.ext4.html (even tho it is s4mini the advice is still the same) using CWM from http://forum.xda-developers.com/gala...overy-t2923587" (thanks to Nousey)
I made the mistake of rooting my phone with KingUser Root. Not Kingo, but the one you can "root" without a PC. At any rate, when the latest Pokemon Go update came out I was unable to play. I tried unrooting with the King software, but it failed. So I tried a method I found online to installe SuperSU over King and then attempted to unroot it with its proprietary software...only to have my phone soft brick and at first it would only boot to the Verizon Splash screen...
So, I downloaded ODIN, downloaded the appropriate files or so I thought and attempted to flash to recover it. Now it won't boot past "Software Updated Failed: please run VZW Software Update Repair Assistant" and that doesn't work either... any tips as to what I can do? I can still use download mode, but recovery mode won't load.
It's the 16 GB VZW SCH-I545 version.
It got stuck here:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl2.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
For me also
Any help ?
Hi my device is S6 Edge G925V (Verizon) and previously on Nouget. My issue is the device is stuck on the verizon logo for awhile then it reboot (it would repeat this cycle forever). Quick backstory to how this happen, I performed a factory reset using the recovery menu and this where trouble started. So far I have downloaded multiple stock firmware from sammobile. I have also downloaded multiple odin version (3.12.7, 3.10.7, 3.10.6, 3.09 droidviews). I have tried multiple cables and port (my laptop only has two). Every time I run the odin program, flash process would always pass but when device reset it would still be stuck at verizon logo. I can still access recovery mode and download mode. I can clear system cache and did factory reset but this led to same result. I just tried again today with Pit file and the result is the same.
Odin Log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> cm.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> cache.img
<ID:0/006> modem.bin
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
I also tried using the samsung smart switch but it doesn't get recognized. I tried to use the emergency software recovery and initialization but I don't have the serial number. I opened the device up and it only has IMEI and SKU.
I'm at my end's wit with this phone atm. Is this issue caused by locked bootloader? Any help would be much appreciated.