Hi my device is S6 Edge G925V (Verizon) and previously on Nouget. My issue is the device is stuck on the verizon logo for awhile then it reboot (it would repeat this cycle forever). Quick backstory to how this happen, I performed a factory reset using the recovery menu and this where trouble started. So far I have downloaded multiple stock firmware from sammobile. I have also downloaded multiple odin version (3.12.7, 3.10.7, 3.10.6, 3.09 droidviews). I have tried multiple cables and port (my laptop only has two). Every time I run the odin program, flash process would always pass but when device reset it would still be stuck at verizon logo. I can still access recovery mode and download mode. I can clear system cache and did factory reset but this led to same result. I just tried again today with Pit file and the result is the same.
Odin Log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> cm.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> cache.img
<ID:0/006> modem.bin
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
I also tried using the samsung smart switch but it doesn't get recognized. I tried to use the emergency software recovery and initialization but I don't have the serial number. I opened the device up and it only has IMEI and SKU.
I'm at my end's wit with this phone atm. Is this issue caused by locked bootloader? Any help would be much appreciated.
Related
I tried to unroot but stuck at samsung bootscreen. Im i bricked?
just set the phone in download mode, and run odin multiloader.
Sent from my GT-I9300 using xda premium
Well i did unroot with Odin, the output:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9300_NEE_I9300XXALE8_I9300NEEALE3_I9300XXLE8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Completed..
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/006> Removed!!
Everything went great, but im still stuck at the samsung bootscreen.
Remove battery .
Boot to recovery mode factory reset.
jje
Thank you, it work.
JJEgan said:
Remove battery .
Boot to recovery mode factory reset.
jje
Click to expand...
Click to collapse
Thankyou! It worked for me as well
Hi, I have a Samsung Galaxy S3 (GT-i9300) which was working fine until the other day. The phone was plugged into the charger and immediately restarted itself and stuck at the initial loading screen. I could boot into TWRP recovery but was unable to mount any partitions and if I tried a factory reset it reported that there was no OS installed on the phone.
So I decided to reload the factory firmware using Odin. I have downloaded what I beleive to be the correct factory 4.3 firmware (I9300XXUGMK6_I9300OXAGMK6_BTU.zip) but when I try to load it using Odin it fails at around 90% (see screenshot).
The complete message log is as follows:
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGMK6_I9300OXAGMK6_I9300XXUGMK6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> tz.img
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> modem.bin
<ID:0/007> cache.img
<ID:0/007> hidden.img
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Here is a screenshot of Odin when it fails. One concern I have is that at the top of the screen it sdays 'Odin3 i9505'. Should that not say the model of the connected phone which in my case would be i9300
If anyone could offer some advice I would be gratefull.
Thanks
EDIT: I forgot to mention, since the failed attempt I can no longer boot into recovery but I can still boot into download mode.
Try the rescue firmware with pit, search in general forum.
boomboomer said:
Try the rescue firmware with pit, search in general forum.
Click to expand...
Click to collapse
Thanks for that boomboomer, I'm downloading it now.
What do you think about Odin not displaying my phone model at the top of the screen. Is this something I should be worried about or just ignore it for the moment.
My the same , but select rom forr I9305 bot i9300 and it fail on modem
and i flash i9300 rom and it works perfect
Hey guys, i acidentally wiped the sd card and everything on the phone, and now i tried to flash stock firmware via odin but in the end when its finished it says "FAIL!"..
This is the odin code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> modem.bin
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is the phone bricked or can anyone please help me with this? I tried two different stock firmwares but got the same message on both
Thank you in advance!!
nkewk
"EDIT: I fixed it myself after almost 6 hours of trying. I followed these steps: http://www.s4miniarchive.com/2014/07....img.ext4.html (even tho it is s4mini the advice is still the same) using CWM from http://forum.xda-developers.com/gala...overy-t2923587" (thanks to Nousey)
Hi. My phone died a week ago, days before it was rebooting by itself, one day in one of the reboots happened like a "half factory reset", some apps were missing and some apps werent. I did a factory reset, it kept rebooting, next day it didnt turn on anymore, it was stuck on a bootloop. When i went to recovery mode i had E: failed to mount /cache /recovery no such file found etc. I thought well, my recovery died and i will flash a new one... right..
I tried flashing a recovery, the same NAND error appeared on Odin. I downloaded a firmware assuming the firmware was the thing that died, i tried installing it again with Odin and:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
What to do? Thanks.
I had/have a virus that persists through all types of recoveries that I could find and try. The virus would install multiple apps and the phone would restart constantly.
I then tried Odin, put the device into download mode (pwr btn, vol dwn, home) and it started saying "downloading... do not turn off target" with a bar that would not move. This was different from what I was expecting from the guides.
I connected the device to my PC and tried to use Odin, loaded up the package? and device was showing connected in odin. The file analysis seemed to work, so I hit start and nothing changed on the device. Odin fails after a few seconds. I then try turn off the device and now comes back with "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" with the same not moving bar.
Top left of this screen is:
Code:
ODIN MODE
PRODUCT NAME: SM-T330
CURRENT BIRNARY: Samsung Official
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE(CSB)
AP SWERV: S1, T1, R1, A1, P1
UDC START
Kies tells me the device is not compatable with Kies.
I'm stuck, please help.
Some Odin output:
Code:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T330XXU1ANE8_T330XSA1ANE3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
the rom you try to odin is kitkat, if you are coming from lollipop you need to activate the repartition option or you can try to flash android 5. if it still fails msg me.
sub77 said:
the rom you try to odin is kitkat, if you are coming from lollipop you need to activate the repartition option or you can try to flash android 5. if it still fails msg me.
Click to expand...
Click to collapse
I cant turn off the device or do anything. Its stuck on the screen which I described last.
I dont know which version of android was on the device.
I let the tablet die and it came back to the same thing
try different usb cable & ports and if possible try kies recovery from another pc, too.