[ROM][MM][fireball] AICP - 11.0 [MODDED TWRP] - Verizon HTC Droid Incredible 4G LTE

[ROM][MM][fireball] AICP - 11.0 [MODDED TWRP] - Verizon HTC Droid Incredible 4G LTE

INITIAL RELEASE
- Must be on modified TWRP with fat/userdata swap HOW TO IS HERE
09/22/16
- Initial MM release
- CLEAN FLASH ONLY
10/23/16
- Hopeful fix for RIL problem
11/19/16 --WILL BE LAST PUBLIC RELEASE--
- ROM update and RIL fixed for sure

Download is live.
Can I get a mod to move this to the right forum and delete this post after?

Thanks for this update Hi bro I am using older version of this ROM so do I need to reinstall firmware and also again to all those methods I did in first time? Plus for some reason I m not able to send sms idk why... I tried many app but all failed anyways thanks for this update bro

Mak29 said:
Thanks for this update Hi bro I am using older version of this ROM so do I need to reinstall firmware and also again to all those methods I did in first time? Plus for some reason I m not able to send sms idk why... I tried many app but all failed anyways thanks for this update bro
Click to expand...
Click to collapse
No you don't need to do anything if you've already done the partition swap. I would make sure I am on MDMowers TWRP and you should be fine, don't dirty flash the ROM do clean flash only.

Beeko said:
No you don't need to do anything if you've already done the partition swap. I would make sure I am on MDMowers TWRP and you should be fine, don't dirty flash the ROM do clean flash only.
Click to expand...
Click to collapse
Thanks bro but with clean flash you mean wipe everything and then install ROM then gapps .?
And g apps suppose to be arm>6.0>aroma right?

Mak29 said:
Thanks bro but with clean flash you mean wipe everything and then install ROM then gapps .?
And g apps suppose to be arm>6.0>aroma right?
Click to expand...
Click to collapse
Yes, backup your stuff and wipe everything. And yes, you can use aroma if you'd like.

Any Specific Baseband?
Beeko, Is there a specific baseband/radio version for this ROM? I'm coming from PACROM 5.1.1 and the baseband that IT requires is installed. When I clean-flashed and booted phone into this ROM, I had no connection/wireless service. I'm going to attempt it again today and check out more possibilities I may have missed. Thank you for keeping this phone relevant and up to date.

actionville said:
Beeko, Is there a specific baseband/radio version for this ROM? I'm coming from PACROM 5.1.1 and the baseband that IT requires is installed. When I clean-flashed and booted phone into this ROM, I had no connection/wireless service. I'm going to attempt it again today and check out more possibilities I may have missed. Thank you for keeping this phone relevant and up to date.
Click to expand...
Click to collapse
I'll have to test when I get home, I don't think there were any new basebands so I'll look when I'm home.

Seems I can't get Verizon APN to show. I'll check the build and make a new one tonight/tomorrow

Beeko said:
Seems I can't get Verizon APN to show. I'll check the build and make a new one tonight/tomorrow
Click to expand...
Click to collapse
That is what I am seeing too, something like "apn not available for this user" or something similar - It won't allow me to add APN info.

actionville said:
That is what I am seeing too, something like "apn not available for this user" or something similar - It won't allow me to add APN info.
Click to expand...
Click to collapse
I'll be looking at it tonight/tomorrow. I've got some stuff for another device that I have to fix first tonight.

Beeko said:
I'll be looking at it tonight/tomorrow. I've got some stuff for another device that I have to fix first tonight.
Click to expand...
Click to collapse
As I said before, thanks for publicizing your interest in keeping this phone model "flowing". You have a donate paypal? I'll toss some bucks your way, since I have been using PacManRom, and now hearing from you about this...interactively. Glad to see people squeeze all performance out of (unsubsidized) 600.00 dollar pieces of gear, instead of contracts, latest and (perceived greatest) phone "upgrades".
---------- Post added at 08:32 PM ---------- Previous post was at 08:31 PM ----------

actionville said:
As I said before, thanks for publicizing your interest in keeping this phone model "flowing". You have a donate paypal? I'll toss some bucks your way, since I have been using PacManRom, and now hearing from you about this...interactively. Glad to see people squeeze all performance out of (unsubsidized) 600.00 dollar pieces of gear, instead of contracts, latest and (perceived greatest) phone "upgrades".
---------- Post added at 08:32 PM ---------- Previous post was at 08:31 PM ----------
Click to expand...
Click to collapse
I'm not accepting donations personally but thank you. I've been busy with other devices so I've kinda left this one in the dirt. But I'm gonna see what I can do for it here this next week or so.

New build in OP. Hopefully got the RIL problem fixed.

ROM update in OP, along with fixed RIL. Wasn't sure if it was working last build, tried with my SIM and it works fine.

Just wanted to pop in and say thanks for this ROM. It is really a great ROM. Super smooth and stable. It is not my main phone anymore but every now and then I switch to it for awhile for some reason. Not sure if it's the smaller size or the nostalgia (was my first smart phone), but I just can't seem to get rid of this phone. Was using your PAC Rom up until now, but it's good to get it updated to an MM based ROM for when I do use it.

Decryption Issues
Hi
when i turn on my htc it asks for a password..
could you provide it.

Beeko said:
ROM update in OP, along with fixed RIL. Wasn't sure if it was working last build, tried with my SIM and it works fine.
Click to expand...
Click to collapse
Thank you, again. The phone is like brand new with this Rom. No loggers, no adware shows up. Great having adaway built in. This Rom makes this old phone sooooo smooth, runs cooler, battery seems managed better. I'm not a fan of android coaxing me to format my SD to it, but I did (backed the contents up to Pc) so the phone has 32 gigs mem. Again, THANK YOU!
The only bug I have found so far, Is turning off mobile hotspot hangs, unless I restart, hotspot stays on. Sometimes I can get it to turn off if I tap hotspot settings or mess with wifi power button bar. On Pacman Rom, what fixed it for me was "allow wifi scanning even when wifi is off." I'm looking for similar settings to see if that does the trick.
Many Thanks Beeko!

Beeko said:
ROM update in OP, along with fixed RIL. Wasn't sure if it was working last build, tried with my SIM and it works fine.
Click to expand...
Click to collapse
Thanks for this rom, just posting this info for others who may want to know what it can/can't do.
I had a little trouble deciphering the conversion from stock to the swapped CM11/12 version ( I first tried what the page describes as for CM13 roms, but ended in boot loops with logcat choking on /data/media permissions)
ROM runs great. I had forgotten the issues with trying to get too many apps on the PacRom with stock partitions.
Data/cell seems fine, video playback excellent, it now makes for a nice portable media player.
I don't have it activated, so cant comment on the hotspot issue mentioned above but Bluetooth has issues.
Can turn on and see other devices, but I get the message "cant communicate to xx:xx:..." when trying to pair to a known working speaker.
A minor flaw in an otherwise great ROM.
Thanks for developing it.
edit: on a whim, I initiated pairing to my speaker, flipped the speaker's power on/off, and immediately the phone changed the mac address of the speaker to it's identifying name, and a pairing request popped up. Pairs successfully.

Related

OmniRom[5.0] [Unofficial] [Build from Source]

OMNI ROM for DROID RAZR
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
****************************************************************************************************
* Your warranty is now void.*
* We(XDA, AOKP, Google, Motorola, and me) are not responsible for bricked devices, dead SD cards, misuse of any of the zips and links provided in this post*
Pre-requisites: Have a Rooted phone, with SafeStrap 3.73(or higher), and some knowledge about how to flash roms, wipes, etc, if you need help with some of this topics you can take a look to other posts on XDA which explain this, anyway I'll leave a short description of wipes(in order to see less bricked devices).
****************************************************************************************************
What is OMNI ROM
OmniROM general forums are available there - http://forum.xda-developers.com/forumdisplay.php?f=2601
Note
OMNI does not come rooted by default. Please flash supersu below if you need root.
LINKS:
(will be available as soon as possible)
SPYDER(XT912):
UMTS_SPYDER(XT910):
I'll upload to MEGA, but if any link got broken I upload again as soon as I can or if any of you make a mirror I can put his/her link in this post.
GAPPS: If you want, you can install gapps or not, If you want, I recomend to use PAgapps ( http://forum.xda-developers.com/showthread.php?t=2397942 )
INSTALLATION:
-If coming from another ROM or another major Omni version, wipe SYSTEM and DATA(if you want Cache, Dalvik and Android Secure too)
-Make sure you're using the latest TWRP(SafeStrap)
-Flash ROM
-Flash Google Apps (GAPPS)(wipe cache and dalvik)
-Reboot
SuperSU: http://download.chainfire.eu/supersu
SuperSU thread: http://forum.xda-developers.com/show....php?t=1538053
Thanks for reading
XDA:DevDB Information
OmniRom 5.0, ROM for the Motorola Droid RAZR
Contributors
tonyt.
Source Code: https://github.com/omnirom
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Internet and Rooted phone with SafeStrap
Based On: AOSP
Version Information
Status: Testing
Current Beta Version: 5.0
Beta Release Date: 2014-11-16
Created 2014-11-15
Last Updated 2014-11-27

Reserved
IMPORTANT
Please if any build didn't work tell me in the main thread, if you find any bug or anything is not working please post it to "bug report" section, so in this way we can have a clean and organized.
I didn't have XT912(SPYDER) so I can only try builds for UMTS.

Reserved
READ PLEASE
I know that maybe the thread will have a lot of pages and you don't want to read all, so I'll post here general problems and posible solutions on order to save time, if your problem is not here please make a replay to the thread or make a review and told us whats your problem and we try to solve it.

Wow, thanks @tonyt
You're really pushing these builds! Awesome.
I've only just downloaded AOKP. Still need to flash it though. Will probably try on ROM slot 1.
Currently on Paranoid Android. I was using CM11 for a long time, but after a while it starts lagging, and it seems silly to have to clear cache or monitor everything that's running all the time. Will see how PA does after two weeks or so. But I will be trying your ports out very, very soon!!!
Thank you!
Generated on a RAZR Maxx (XT910) using XDA's free mobile app.

@tonyt I never thought I would have so many choices! Theses are all great. I won't use an AOSP ROM, and all the ROMs you have recently posted are based on or use an AOKP type of system. (They all allow the led light to work with the screen ON, either natively or with the XLed module...)
Currently using the AOSB, and it is running well! Still restoring apps, but this one allows me to move them to the SD card. I loved Dirty Unicorns, but kept running out of space. Keep up the great work, and Thank You!

d.casper.b said:
Wow, thanks @tonyt
You're really pushing these builds! Awesome.
I've only just downloaded AOKP. Still need to flash it though. Will probably try on ROM slot 1.
Currently on Paranoid Android. I was using CM11 for a long time, but after a while it starts lagging, and it seems silly to have to clear cache or monitor everything that's running all the time. Will see how PA does after two weeks or so. But I will be trying your ports out very, very soon!!!
Thank you!
Generated on a RAZR Maxx (XT910) using XDA's free mobile app.
Click to expand...
Click to collapse
I want to keep RAZR alive, and I want give kitKat a good farewell
sherri said:
@tonyt I never thought I would have so many choices! Theses are all great. I won't use an AOSP ROM, and all the ROMs you have recently posted are based on or use an AOKP type of system. (They all allow the led light to work with the screen ON, either natively or with the XLed module...)
Currently using the AOSB, and it is running well! Still restoring apps, but this one allows me to move them to the SD card. I loved Dirty Unicorns, but kept running out of space. Keep up the great work, and Thank You!
Click to expand...
Click to collapse
I'm using AOSB as my daily driver I'm in love with this rom, I'm trying to build and fix all the roms that I can, today I'll post new versions of AOSB and told me if you prefer AOKP or DU, Omni stills downloading because my family power off my computer and all the sync goes to the trash but if I can I build Omni today.
Thanks to you!!

Had you asked me 2 days ago which ROM I would prefer you to work on, it would have been AOKP. That has been the same answer for 3 years. My favorite, then Liquid Smooth.
However, your AOSB is incredible. GPS seemed to work, I just need to try the voice navigation. Everything else is smooth as silk. I will try to reinstall Dirty Unicorns later, but for now, this is amazing.
Keep up the great work, and again, thank you!

sherri said:
Had you asked me 2 days ago which ROM I would prefer you to work on, it would have been AOKP. That has been the same answer for 3 years. My favorite, then Liquid Smooth.
However, your AOSB is incredible. GPS seemed to work, I just need to try the voice navigation. Everything else is smooth as silk. I will try to reinstall Dirty Unicorns later, but for now, this is amazing.
Keep up the great work, and again, thank you!
Click to expand...
Click to collapse
I don't know why GPS didn't work on DU, but later today or tomorrow I'll put a new build with SU and bluetooth working.
OMNI in one hour may finish I hate my internet conecction :'(

Thanks again @tonyt.! You are pumping these Roms out at an incredible pace!

tonyt. said:
I don't know why GPS didn't work on DU, but later today or tomorrow I'll put a new build with SU and bluetooth working.
OMNI in one hour may finish I hate my internet conecction :'(
Click to expand...
Click to collapse
First of all, thanks for your ROMs, its great to have the possibility to choose from so many variations.
My question (sorry if this has already been asked): Do you think its possible to build a cm-12 version for the RAZR? I just checked all (I think) relevant repositories in cyanogenmods github, they all now include a cm-12 branch...
Sent from my XT910 using XDA Free mobile app

Kilroy. said:
First of all, thanks for your ROMs, its great to have the possibility to choose from so many variations.
My question (sorry if this has already been asked): Do you think its possible to build a cm-12 version for the RAZR? I just checked all (I think) relevant repositories in cyanogenmods github, they all now include a cm-12 branch...
Sent from my XT910 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks I can't build CM12 because another guy is trying to build it, if he can't do it and he didn't want to try to build it anymore, if you want I can try to make it :good:

tonyt. said:
Thanks I can't build CM12 because another guy is trying to build it, if he can't do it and he didn't want to try to build it anymore, if you want I can try to make it :good:
Click to expand...
Click to collapse
I couldn't build, the breakfast, lunch, and brunch commands kept giving me errors. I am trying to build AOSP 5.0.0_r6 right now. My repo sync of AOSP will be done in around 50 minutes.
@tonyt. Could you try building CM12 just to see if it wasn't my computer that caused the errors?
Thanks.

tonyt. said:
Thanks I can't build CM12 because another guy is trying to build it, if he can't do it and he didn't want to try to build it anymore, if you want I can try to make it :good:
Click to expand...
Click to collapse
That'd be great. Tried to build it myself a couple of days back, but Motorola's omap-4-common repo hadn't been synced, so the make command failed epically And right now, I just don't have the time to work through the whole procedure again.
Really appreciate your efforts!
Sent from my XT910 using XDA Free mobile app

Kilroy. said:
That'd be great. Tried to build it myself a couple of days back, but Motorola's omap-4-common repo hadn't been synced, so the make command failed epically And right now, I just don't have the time to work through the whole procedure again.
Really appreciate your efforts!
Sent from my XT910 using XDA Free mobile app
Click to expand...
Click to collapse
Bobcus Leper said:
I couldn't build, the breakfast, lunch, and brunch commands kept giving me errors. I am trying to build AOSP 5.0.0_r6 right now. My repo sync of AOSP will be done in around 50 minutes.
@tonyt. Could you try building CM12 just to see if it wasn't my computer that caused the errors?
Thanks.
Click to expand...
Click to collapse
Okay, guys, the only thing that you have to know is that I have a very poor conecction so, maybe I build it for the next weekend, I'm downloading OMNI and maybe took 4 hours more but I'll try

tonyt. said:
Okay, guys, the only thing that you have to know is that I have a very poor conecction so, maybe I build it for the next weekend, I'm downloading OMNI and maybe took 4 hours more but I'll try
Click to expand...
Click to collapse
Hey @tonyt. I could build some ROMs for you, as I have a pretty good internet connection. All I need is some knowledge on how to build for this device and I can held you make these ROMs at a faster pace. [emoji6] Can you PM me your hangouts?
Sent from my XT912 using Tapatalk

Here are some sources. Please don't ask me any questions, because I'm a noob when it comes to building.
http://nathanpfry.com/2014/02/07/how-to-prepare-ubuntu-14-04-lts-trusty-tahr-to-compile-android-roms
How to Build your own CyanogenMod Rom from Source: http://youtu.be/GAyxypK7_K8
http://wiki.cyanogenmod.org/w/Build_for_spyder

Vlasp said:
Hey @tonyt. I could build some ROMs for you, as I have a pretty good internet connection. All I need is some knowledge on how to build for this device and I can held you make these ROMs at a faster pace. [emoji6] Can you PM me your hangouts?
Sent from my XT912 using Tapatalk
Click to expand...
Click to collapse
https://plus.google.com/u/0/111655988248202993846/posts This is my G+ but maybe this week I can teach you how to
Bobcus Leper said:
Here are some sources. Please don't ask me any questions, because I'm a noob when it comes to building.
http://nathanpfry.com/2014/02/07/how-to-prepare-ubuntu-14-04-lts-trusty-tahr-to-compile-android-roms
How to Build your own CyanogenMod Rom from Source: http://youtu.be/GAyxypK7_K8
http://wiki.cyanogenmod.org/w/Build_for_spyder
Click to expand...
Click to collapse
Yes Bobcus but for CM12 we need to use other tools, I'll use this: http://forum.xda-developers.com/chef-central/android/tutorial-compile-lollipop-ubuntu-t2929410

Building process start
I leave a terminal on my home building OMNI, When I come back home I'll tell you if it works and all what you need to Know
Regards,
Juan Pablo Toniolo

I have both builds, but they have some errors in META-INF folder because I can't flash it, and I have asked in omni G+ but for now, noone give me any solution. I have replaced with others and didn't work. Maybe I have errors in my slot, anyway I build the rom so I have to wait for an answer at g+ community, sorry for the delay

tonyt. said:
I have both builds, but they have some errors in META-INF folder because I can't flash it, and I have asked in omni G+ but for now, noone give me any solution. I have replaced with others and didn't work. Maybe I have errors in my slot, anyway I build the rom so I have to wait for an answer at g+ community, sorry for the delay
Click to expand...
Click to collapse
META-INF 4 UMTS or Spyder?

[ROM] [UNOFFICIAL] [AOSP] LiquidSmooth v4.0 (Android 5.0) for the SGH-I777/959G

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome everyone once again to a brand new Android. Here you will find unofficial builds for LiquidSmooth v4.0 running Android 5.0 Lollipop. Bare in mind that these are currently in the ALPHA stage, so expect bugs here and there and things to be a little off. This is early in development and may or may not be daily driver ready yet. And now, on with the show.
Click to expand...
Click to collapse
DISCLAMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
We ask that you do your part to know your device and know how to recover from problems before you flash!
Code:
[URL="https://github.com/LiquidSmooth"]LiquidSmooth Github[/URL]
Code:
You can download the latest build from [URL="https://www.androidfilehost.com/?fid=95832962473398652"][COLOR="Blue"]]RIGHT HERE[/COLOR][/COLOR][/URL] (Current Build: 12/06 )
Gapps can be found [URL="https://www.androidfilehost.com/?fid=95832962473398367"][COLOR="Blue"]here[/COLOR][/URL] thanks to @rogersb11
INSTALLATION INSTRUCTIONS
1) DO A BACKUP!
2) If you haven't prior to this step, flash the Shift Eternal CM12 kernel, then reboot recovery.
3) Factory Reset, Wipe Cache, Wipe Dalvik.
4) Wipe System
4) Flash ROM then flash Gapps.
5) Reboot and enjoy!
Also note that the initial boot takes a good amount of time. Upwards of 10 minutes in some cases. Just be patient when you get ready to boot into the system. It will eventually start up.
IMPORTANT NOTE:
You must be on a Lollipop compatible kernel and recovery for this to flash. Currently, the only one available is the Shift Eternal CM12 kernel from @rogersb11. You can download it here. This ROM package contains the same kernel so you will not have to reflash it after flashing the ROM. Questions related to the kernel can be directed to this thread.
You will not have a keyboard upon the initial boot. Skip through the initial setup process then do the following:
Go to Settings>Language and Input
Select the current keyboard.
A pop up will then come up and you need to flip the hardware switch in the top right corner to on.
After this you can then go through with signing in with your account, setting up wifi, etc.
Please remember that these are UNOFFICIAL ALPHA BUILDS. This meaning nobody from the LiquidSmooth team should be expected to help you if you run into any issues. Bugs should be reported to THIS THREAD ONLY. I will do my best to address and fix them as I can. I'm not a master developer, just a builder. But I am learning, and I will try my best to track down fixes to relevant bugs.
Click to expand...
Click to collapse
KNOWN ISSUES
As reported by @rogersb11 in his CM12 thread, "If you don't have WiFi on the device will reboot upon going to sleep so LEAVE THE WIFI ON." This is a Lollipop bug in general, and currently has no fix.
SPECIAL THANKS
Special thanks to the entire LiquidSmooth team for building this awesome ROM. I just compile it from source for this device and the ROM would not be here without their dedication and hard work to provide it.
Special thanks also once again to @rogersb11 for his help and guidance and tireless work to bring the device tree up to be ready for Android 5.0 ... Seriously, this dude has coded his fingers to the bone to make this a reality. I wouldn't have this thread up and going already without him. So be sure to let him know how thankful you are for his work to keep this device alive.
XDA:DevDB Information
Unofficial LiquidSmooth v4.0 for the SGH-I777/959G, ROM for the AT&T Samsung Galaxy S II SGH-I777
Contributors
TheGeekyNimrod, rogersb11
Source Code: https://github.com/LiquidSmooth/android
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.0.x
Version Information
Status: Alpha
Current Beta Version: LiquidSmooth v4.0
Beta Release Date: 2014-12-06
Created 2014-12-07
Last Updated 2014-12-07

RESERVED

Reserved one more just because

TheGeekyNimrod said:
Reserved one more just because
Click to expand...
Click to collapse
Thanks for all the hard work. Just a quick question. I assume this isn't happening to everyone, but Google Play Services crashes, not allowing me to create my backup account. Does the same on the cm12 build.

omar71693 said:
Thanks for all the hard work. Just a quick question. I assume this isn't happening to everyone, but Google Play Services crashes, not allowing me to create my backup account. Does the same on the cm12 build.
Click to expand...
Click to collapse
Hmm. I'm not sure. Haven't had that issue. A guess says it could be the Gapps, but I can't say that for sure though because I tested with different Gapps than the ones listed. Have you tried going back and wiping Dalvik and reinstalling Gapps?
Sent from my SAMSUNG-SGH-I747

TheGeekyNimrod said:
Hmm. I'm not sure. Haven't had that issue. A guess says it could be the Gapps, but I can't say that for sure though because I tested with different Gapps than the ones listed. Have you tried going back and wiping Dalvik and reinstalling Gapps?
Sent from my SAMSUNG-SGH-I747
Click to expand...
Click to collapse
Yeah, I actually did. I'm going to try some other things throughout the day and report back.

OMG, I can't believe there is ANOTHER lollipop build for the s2 . Oh BTW where you listed me as a contributer if you remove the @ before my username it will link me correctly. You don't need that on DevDB. Just edit profect at the top and then it automatically links the username without the @ in those contributor boxes

omar71693 said:
Thanks for all the hard work. Just a quick question. I assume this isn't happening to everyone, but Google Play Services crashes, not allowing me to create my backup account. Does the same on the cm12 build.
Click to expand...
Click to collapse
Yah, I'm having the same google play services FCs. I also tried bpear's Lollipop Gapps and that didn't work either . . .
NOTE: I did have the same problem on @rogersb11 Cm12 build too

I tested this with the 5.0 gapps from here. But if you try it, you will have to strip a few unneeded apps out of it for the sake of internal storage space. I can't remember exactly which ones I pulled out of it, but you can pretty much just use Google Play, Play Services, and Google Services Frameworks, and download the rest from the PlayStore

rogersb11 said:
OMG, I can't believe there is ANOTHER lollipop build for the s2 . Oh BTW where you listed me as a contributer if you remove the @ before my username it will link me correctly. You don't need that on DevDB. Just edit profect at the top and then it automatically links the username without the @ in those contributor boxes
Click to expand...
Click to collapse
Got it. I'm really not sure I like how the whole DevDB thing works. Should have just started a regular thread

I may possibly have another build out tomorrow with a few minor tweaks and a little overhaul to the UI. I don't know about everyone else, but I don't like the dark background of, say, the settings app. I'll be working on this and a few minor things tomorrow.
Sent from my SAMSUNG-SGH-I747

I haven't been able to get a working system. It usually hangs on the boot animation (animation freezes). Sometimes it gets to the optimizing apps screen, but it will hang there too. However, if I do NOT flash gapps, it's able to boot, but then hangs on the welcome screen (it freezes and doesn't accept any input). Between failed boot attempts, I'll wipe everything or even go as far as reflashing.
Any ideas?

sciguy125 said:
I haven't been able to get a working system. It usually hangs on the boot animation (animation freezes). Sometimes it gets to the optimizing apps screen, but it will hang there too. However, if I do NOT flash gapps, it's able to boot, but then hangs on the welcome screen (it freezes and doesn't accept any input). Between failed boot attempts, I'll wipe everything or even go as far as reflashing.
Any ideas?
Click to expand...
Click to collapse
Don't bother wiping everything.. Tried that two different times, still having the same results as you. I reverted back to KK and I'm just gonna wait for another build.
Sent from my SGH-I777 using XDA Free mobile app

Remember these are alpha builds. While I haven't had that issue with it yet, doesn't mean it won't happen for others. On mine, once I got to the setup screen I had to reboot the first time, then it allowed me to skip through until I was able to enable the keyboard. And it worked fine after that.
It will stabilize as time goes by for sure.
Sent from my SAMSUNG-SGH-I747

I had hoped to have another build out today, but I had a learning curve to get through first. But now that I have learned, should be late tonight or tomorrow. Mainly UI fixes, maybe a tweak or two elsewhere.
Sent from my SAMSUNG-SGH-I747

Finally! Android L for my GS2! Now to wait for an at&t GS4 custom Lollipop ROM.

[Q] About booting this ROM
When I flash the shift eternal kernel does it give me the right clockwork mod recovery I need to flash the rom? If not,where can I download it?

StoneyJSG said:
When I flash the shift eternal kernel does it give me the right clockwork mod recovery I need to flash the rom? If not,where can I download it?
Click to expand...
Click to collapse
It comes with PhilzTouch which is very a custom recovery based on CWM. It will be the right version for you to flash this and also the version and kernel that the ROM will be running.
Sent from my SAMSUNG-SGH-I747

Was hoping to have a new build posted today, but there are a few too many quirks with it for me to feel comfortable putting it out there. It boots, but there's a few things going crazy. I do believe I can get it worked out though, and will try to get another build done and put out tonight or tomorrow.
Biggest change right now is that I have reverted the Material Dark theme in favor of the Material Light theme that Lollipop is more known for right now. In the future, according to one of LS's lead developers, there will be a switch to go between the two.
Anyhoo, carry on.

My internal storage is not working. Google play services not working. Browser is also not working. Unable to install any app at all. Very nice rom though. Once a stable version is released i will use it as daily driver.

[ROM][4.4.4][UNOFFICIAL] LIQUID SMOOTH LS990

LIQUIDSMOOTH 4.4.4 [UNOFFICIAL]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WARNING
This is a disclaimer: While this has been tested I am not responsible for ANY damage done to your device. I take no responsibility for bootloops, soft bricks, hard bricks, living brick monsters, your phone proving an omnipotent being fallible(thus negating all existence), your great aunt smoking bath salts, flying monkeys, hot pockets, obamacare, dingleberries, carnivorous dingleberries or Sundays. Your warranty is now void and it's your fault!Use at your own risk!!
Secondary disclaimer: If you have carnivorous dingleberries then you have bigger problems to worry about - but for any phone related questions feel free to message me on here either privately or in the thread.
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
We ask that you do your part to know your device and know how to recover from problems before you flash!
FEATURES
Android KitKat 4.4.4
Fast and Buttery Smooth UI
Viper4Android (Built into LiquidSmooth Settings under "Equalizer")
CM11 Themes Engine
Liquid Explorer File Manager
Apollo Music Player
Torch
PA Pie Controls
Slim Pie Controls
Numerous Interface mods for custom statusbar, navigationbar, navring, battery, lockscreen, notifications and more!
Performance Tweaks(Kernel Tweaks)
Dynamic Color Changer
Power Reboot Menu
HALO
G3 Oversharpening Fix
OmniSwitch Added(12-28-14)
And MANY MORE, just try it and see for yourself!!
Whats not working?
NFC - I hate you, NFC......
Probably wireless charging but have yet to test it.
FULL INSTRUCTIONS
Download ROM and GAPPS to internal memory
Reboot into TWRP Recovery
Make a BACKUP(JUST IN CASE)
Go back to Main Menu and select Wipe->Advanced Wipe and select System, Data, Dalvik and Cache(DO NOT SELECT INTERNAL) and wipe.
Go back to Main Screen and select Install
Find LS zip, select it and install
Press back and install GAPPS
Reboot
PROFIT!
DOWNLOADS
LIQUIDSMOOTH
LS-KitKat3.2_12-28-14
GAPPS
I use official PA GAPPS found here (specifically PA NANO but the choice is yours - AS LONG AS IT'S 4.4).
Changelog
12-28-14
Roaming issue/data label fixed
Updated Mixer_paths.xml for better sound quality and volume
Added OmniSwitch by default
Fixed SDCard issues some were experiencing
12-26-14
Initial Build
SOURCECODE
LiquidSmooth
CyanogenMod
TESTERS
@engine95
@seanskiT!
@solver404
@aheeejd
THANKS TO:
LiquidSmooth and the team behind it
@liquid0624
@liquidzgrl
@deadman96385
@sspencer10
@johnnyslt
@Somber73
@jsnweitzel
@CPA Poke
@Jarrid42
CyanogenMod
@xboxfanj - for showing infinite patience.
@invisiblek and @jholtom for all the work they did pushing commits to CM for the G3
@Skin1980 for his oversharpening fix
@RandomPooka for his Bluetooth fix
XDA:DevDB Information
LIQUID SMOOTH 4.4.4 LS990, ROM for the Sprint LG G3
Contributors
HPTesla, engine95, seanskiT!
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP/CyanogenMod
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2014-12-26
Created 2014-12-27
Last Updated 2014-12-28

FAQ
FIRST AND FOREMOST
HOW TO PROPERLY POST A BUG - Guide to logcats, dmesg and last_kmsg.
Coming in and saying "XYZ isn't working", isn't as helpful as some might think. Even if your intentions are good i.e., making this rom better, I (and any developer for that matter)needs more info. Logcats are the way to do this. If it's a kernel panic, last_kmsg is where it's at. Without supplying me with proper logs I may not be able to help and you may be ignored. Sorry to be harsh but we all have lives outside of xda(hopefully) and time is pretty precious.
GPS isn't working! HELP!
While it works for me, this has been a known issue on LG phones and AOSP roms since I owned my LGOG. First thing to try is to restore your stock backup, get a lock for a few minutes then restore the rom. The only other issue may be with your particular version of GAPPS. Sometimes Google Services can act funny with location services. I use PA Nano and have had zero issues with GPS.
Why won't NFC work?
This is a bug for pretty much every rom right now. We are all working on a fix and as soon as one is available, I will rebuild and reupload the rom.
My 64gb+ sd card won't work!!
While exFAT is usually preferred over FAT32, exFAT has been hit or miss so USE A COMPUTER to format your sd card to FAT32 if exFAT doesn't work for you. DO NOT USE TWRP OR STOCK LG - USE A COMPUTER!!!!

Reserved2
Reserved2

Reserved3
Reserved3

Weird, I have data, but I am unable to send SMS or place a call. Will try reflashing
---------- Post added at 06:21 PM ---------- Previous post was at 06:14 PM ----------
crazycori said:
Weird, I have data, but I am unable to send SMS or place a call. Will try reflashing
Click to expand...
Click to collapse
Reflashed, and now it seems to work, sorry. Could have been a botched gapps zip I had installed prior

crazycori said:
Weird, I have data, but I am unable to send SMS or place a call. Will try reflashing
---------- Post added at 06:21 PM ---------- Previous post was at 06:14 PM ----------
Reflashed, and now it seems to work, sorry. Could have been a botched gapps zip I had installed prior
Click to expand...
Click to collapse
Yeah I was gonna say, I had that issue before as well and knew I fixed it(took me FOREVER and I refused to release even a beta until the basics work) but remnants are a serious pain particularly on LG products.

crazycori said:
Weird, I have data, but I am unable to send SMS or place a call. Will try reflashing
---------- Post added at 06:21 PM ---------- Previous post was at 06:14 PM ----------
Reflashed, and now it seems to work, sorry. Could have been a botched gapps zip I had installed prior
Click to expand...
Click to collapse
Had the same issue with SMS.
I've tried the GAPPS Mini Modular Package and that doesn't seem to work. I don't have any Google apps.
Gonna try the Full Gapps and report back

Another strange thing is the End Call button wont work. I have honestly never experienced that one before

crazycori said:
Another strange thing is the End Call button wont work. I have honestly never experienced that one before
Click to expand...
Click to collapse
Maybe a bad upload? Give me about 15 minutes and I will reupload and change the link.

HPTesla said:
Maybe a bad upload? Give me about 15 minutes and I will reupload and change the link.
Click to expand...
Click to collapse
Cool thanks a lot, I tried to reflash and TWRP said it was a bad zip.

crazycori said:
Cool thanks a lot, I tried to reflash and TWRP said it was a bad zip.
Click to expand...
Click to collapse
Ok new upload and link has simply been changed behind the scenes. I downloaded that one and got the same problem when flashing. The one I uploaded I also flashed and everything was fine so hopefully this one uploaded correctly.

HPTesla said:
Ok new upload and link has simply been changed behind the scenes. I downloaded that one and got the same problem when flashing. The one I uploaded I also flashed and everything was fine so hopefully this one uploaded correctly.
Click to expand...
Click to collapse
Thanks man, I will flash ASAP and report back. BTW love your signature, just watched the Christmas episode
---------- Post added at 08:06 PM ---------- Previous post was at 07:28 PM ----------
Works great now! This ROM is sweet, you do great work! I haven't noticed any issues yet. SMS is working, calls work now as well. Thanks again!

Rom has been running great guys. I use hangouts, so I never have any problems sending or receiving. Thanks so much for these kk builds. To me LP is just to boring at the moment.
Sent from my LG-ls990 using Xparent Green Tapatalk 2

Glad to see you got this up and running. Congrats

Pump Ac7i0n said:
Glad to see you got this up and running. Congrats
Click to expand...
Click to collapse
Oh yeah, Idk if it would be the same for lollipop, but resync, everything. lol. That's what I did. And used cm/the muppets updated sources for device and vendor. Then change cm.mk and cm.dependencies to liquid.mk, etc and change the files themselves(switch cm to liquid in those) and voila! Hope it helps you buddy!
EDIT: Oh, under vendor you need atleast g3-common and lss990, under devices you need those AND qcom, possibly samsung as well but definitely qcom and g3/ls990. Good luck.

I was getting domestic roaming and when i selected the show carrier logo in status bar barit was showing that i was on boost mobile
Sent from my LGLS990 using XDA Free mobile app

stevie13.xo said:
I was getting domestic roaming and when i selected the show carrier logo in status bar barit was showing that i was on boost mobile
Sent from my LGLS990 using XDA Free mobile app
Click to expand...
Click to collapse
What is your apn set to under mobile network? It should be Sprint LTE. If it is then I'm guessing there is still an issue with the eri.xml file but it should just be a label error. It doesn't mean you are actually roaming or should incur roaming charges, particularly if you have data not working while roaming(under the same mobile network menu in settings). I'll look into it but mine says Sprint.

Damn, you've been busy HP. Thanks so much for all this. Won't be able to try til Monday, but looking forward to it.

HPTesla said:
What is your apn set to under mobile network? It should be Sprint LTE. If it is then I'm guessing there is still an issue with the eri.xml file but it should just be a label error. It doesn't mean you are actually roaming or should incur roaming charges, particularly if you have data not working while roaming(under the same mobile network menu in settings). I'll look into it but mine says Sprint.
Click to expand...
Click to collapse
It was set to Sprint LTE. Thanks for looking into it.. It was fast. Restored nandroid because i didnt want to use too much data while roamint
Sent from my LGLS990 using XDA Free mobile app

stevie13.xo said:
It was set to Sprint LTE. Thanks for looking into it.. It was fast. Restored nandroid because i didnt want to use too much data while roamint
Sent from my LGLS990 using XDA Free mobile app
Click to expand...
Click to collapse
It's weird because even though I think I may know what the issue is, mine and aheeejd's said Sprint. These phones are too picky. I'm gonna try something and rebuild anyway. New build probably won't be up til tomorrow though.

[ROM][6.0.1][wt88047][UNOFFICIAL] Dirty Unicorns 10.0

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About Us:
Dirty Unicorns is a project that started out with no name. It was a project that was first based off AOKP back in the early days of Jelly Bean. In the early days it was just a one man show on one device, the EVO 3D. Since then, many others have joined the project and it has grown exponentially.
We have seen a lot of talent contribute to this project of ours. Big or small, the focus was always on contributing to the community. That is ultimately why we do what we do. After Jelly Bean, we decided to move to a new base, OmniROM. While AOKP was fun, OmniROM proved to be even more exciting base because it challenged us to see what we could do with a project that had different goals in mind. We learned a lot and again, gain contributors. With Lollipop, we moved to an AOSP base with a lot of patches from CAF to make our older devices function as they should. We grew even more and learned a whole lot more.
It has been an awesome learning experience and is still not over! We are still learning every day and continue to move forward. Lastly, we DO NOT accept, nor ask, for donations. We don't believe in that. Everything that is necessary to keep this project going is out of our own pocket. Gerrit, Jenkins, Websites, Devices, etc. We will never ask for a dime. All we do ask, is that you have patience, search, read and try to enjoy the process with us!!
Kernel Source:
https://github.com/redmi2/kernel
Flashing Instructions:
1. Boot in twrp.. do all the wipes (system, data, cache and dalvik cache) and then flash the rom.zip
2. Reboot.
Download Links:
Dirty
GAPPS_minimal
Changelog:
Code:
Version 10.0
- Initial Release of M
For a detailed change log, check [URL="http://gerrit.dirtyunicorns.com/#/q/status:merged,n,z"]http://gerrit.dirtyunicorns.com/#/q/status:merged,n,z[/URL]
Credit and Thanks:
We would like to give thanks to everyone that contributes to the Android community, big or small because every bit counts. Although we can't list each and every contributor within the Android community, we would like to highlight some of the teams and individuals that have made it possible NOT only with just this version of DU but throughout the years because we don't ever want to forget where we came from nor those that have helped us!
That said, on behalf of the DU team we say THANKS to....
JMZ Software
Baby Jesus
Code Aurora Forum
Omni ROM
Android Open Kang Project (AOKP)
Android Ice Cold Project (AICP)
XDA-Developers
SlimROMs
Preludedrew
Max Weninger
Team Black Out
CyanogenMod
Pure Nexus Project
Hashbang173
And.. on behalf of the Redmi2 "team-less" i say THANKS to....
EVERYONE working on Redmi2 WITHOUT official Xaomi sources (until yesterday.. they released the kitkat sources )
Frequently asked questions:
The download link is slow, can you provide a mirror?
From time to time, we perform maintenance on our website but we do not authorize any mirrors. Please have patience!
I'm on a TEST BUILD and have this bug, can you help?
Please keep any discussion about test builds in the G+ community!
How can I get Viper4Android working?
Check this thread out https://plus.google.com/+JasonPasch5/posts/6JDRjdL2mKM
Are you coming from a ROM with Layers?
Make sure you remove your 'overlay' folders and perform a FULL WIPE
My battery stats are all messed and reporting the wrong percentage, what can I do?
Stop using another kernel. Do a FULL WIPE and flash the ROM again
Is this ROM CM based or AOSP based?
This ROM is based off AOSP
Does this ROM have layers or the CMTE?
This ROM uses the CM theme engine
Pulse doesn't work with [insert music app]
Check this thread out https://plus.google.com/101146731143...ts/TcSzc61xuVx
I'm getting a FC from the theme chooser, what gives?
This is due to restoring data/apps from Google. Go ahead and clear data and cache for theme chooser and theme provider then reboot you should be good moving forward.
I changed my LCD density and now the navbar looks weird, what gives?
This is currenly an issue that we are aware of and addressing. For now after you changed density reset navbar layout or stay on the stock density.
Other Links:
G+ community - https://plus.google.com/u/0/communit...28866939227235
ROM Source - https://github.com/DirtyUnicorns
Gerrit - http://gerrit.dirtyunicorns.com
Crowdin (translations) - https://crowdin.net/project/dirtyunicorns
Jira (Bug Report / Feature Request) - http://jira.dirtyunicorns.com/

Hi, i made this rom as an last contribute from me to Redmi2( i bought Nexus 5X)
and plus.. @s.sawrav wanted "DU"

Excellent rom with a nice UI .

Ready for test. :good:

New Rom! Thanks, downloading...

@pirej I am very happy for you making this ROM possible for redmi 2. I hope you will not abandon DU in Redmi 2 now that you got nexus 5x. Looking forward for future dirty builds.
#Stay Dirty Never Clean

flarestar123 said:
@pirej I am very happy for you making this ROM possible for redmi 2. I hope you will not abandon DU in Redmi 2 now that you got nexus 5x. Looking forward for future dirty builds.
#Stay Dirty Never Clean��
---------- Post added at 07:17 PM ---------- Previous post was at 07:17 PM ----------
[/COLOR @pirej I am very happy for you making this ROM possible for redmi 2. I hope you will not abandon DU in Redmi 2 now that you got nexus 5x. Looking forward for future dirty builds.
#Stay Dirty Never Clean?
Click to expand...
Click to collapse
Ill stick around for a while, ill try to use some code from the official xiaomi kernel..

pirej said:
Ill stick around for a while, ill try to use some code from the official xiaomi kernel..
Click to expand...
Click to collapse
Nice to hear that @pirej. Always waiting to something amazing. I will be glad if Redmi 2 will be listed on the official DU now that we have a kernel source now that DU M is finished its testing phase

@pirej I got bootloop I wiped all including system but still loops. what gapps did you used

flarestar123 said:
@pirej I got bootloop I wiped all including system but still loops. what gapps did you used
Click to expand...
Click to collapse
Code:
Flashing Instructions:
Same as all other rom's , do all the wipes and flash it, and reboot
[B][U][COLOR="Red"]For Now.. dont flash anything else[/COLOR][/U][/B]

'This is what i was been waiting for since i bought redmi 2.
@pirej Just don't abandon this project.(Until DU gets stable)
#Stay Dirty Never Clean

pirej said:
Code:
Flashing Instructions:
Same as all other rom's , do all the wipes and flash it, and reboot
[B][U][COLOR="Red"]For Now.. dont flash anything else[/COLOR][/U][/B]
Click to expand...
Click to collapse
I followed all of that I do all the wipes data, dalvik, cache, internal and system. I didn't even flash anything including gapps but still I got bootloop

flarestar123 said:
I followed all of that I do all the wipes data, dalvik, cache, internal and system. I didn't even flash anything including gapps but still I got bootloop
Click to expand...
Click to collapse
Ok, then.. what device do you have, what rom do you come from..??
Did anyone else flash it??
I know @s.sawrav has problem flashing it too, on the other hand.. i flashed ~10 versions so far and only the first one was stuck on "mi" logo, but it wasn't a good build, audio, wifi, fm... wasn't built at all, now everything is ok, or at least good enough for an alpha build.
I can only think of one thing at this moment.. can you please flash my CAF_Rom first, and then flash DU ???
Just for testing.

pirej said:
Ok, then.. what device do you have, what rom do you come from..??
Did anyone else flash it??
I know @s.sawrav has problem flashing it too, on the other hand.. i flashed ~10 versions so far and only the first one was stuck on "mi" logo, but it wasn't a good build, audio, wifi, fm... wasn't built at all, now everything is ok, or at least good enough for an alpha build.
I can only think of one thing at this moment.. can you please flash my CAF_Rom first, and then flash DU ???
Just for testing.
Click to expand...
Click to collapse
I came from CM maybe I need to flash a AOSP based ROM first then flash DU. I'll report later

pirej said:
Ok, then.. what device do you have, what rom do you come from..??
Did anyone else flash it??
I know @s.sawrav has problem flashing it too, on the other hand.. i flashed ~10 versions so far and only the first one was stuck on "mi" logo, but it wasn't a good build, audio, wifi, fm... wasn't built at all, now everything is ok, or at least good enough for an alpha build.
I can only think of one thing at this moment.. can you please flash my CAF_Rom first, and then flash DU ???
Just for testing.
Click to expand...
Click to collapse
I was on AOKP which is based on CM when i flashed DU,anyways so i tried flashing your caf rom and this happens:-
What should i do?Should i flash MIUI KK through fastboot,then try?

s.sawrav said:
I was on AOKP which is based on CM when i flashed DU,anyways so i tried flashing your caf rom and this happens:-
What should i do?Should i flash MIUI KK through fastboot,then try?
Click to expand...
Click to collapse
I encounter the same issue I flash your kernel but it is not booting so I went back to CM13 all is working I don't know but I think we need a more stable kernel or build. I will start working other things tomorrow if I can make a workaround but I hope you find a clean solution for this problem.

s.sawrav said:
I was on AOKP which is based on CM when i flashed DU,anyways so i tried flashing your caf rom and this happens:-
What should i do?Should i flash MIUI KK through fastboot,then try?
Click to expand...
Click to collapse
Sorry, but is this comment meant to be sarcastic or???
If yes.. then flash gingerbread first, then turn around 3 times, spit in your hand 3 times and then throw your phone in fire, THEN try :silly:
If not... then flash this (caf_kernel) , then from twrp go to reboot to recovery again, and then flash the caf rom.

pirej said:
Sorry, but is this comment meant to be sarcastic or???
If yes.. then flash gingerbread first, then turn around 3 times, spit in your hand 3 times and then throw your phone in fire, THEN try :silly:
If not... then flash this (caf_kernel) , then from twrp go to reboot to recovery again, and then flash the caf rom.
Click to expand...
Click to collapse
I'm sorry but there was no sarcasm at all,why would i?I said what i said to know your opinion whether to flash miui kk fastboot rom or not as i thought after flashing the stock MIUI Romi would flash your caf rom and see if it helps,BTW i'll try your method first and see.

I was kidding

pirej said:
I was kidding
Click to expand...
Click to collapse
You hurt my feelings man :crying: BTW i should wipe everything then flash the kernel(or should i flash the boot.img through fatboot?) and then reboot to recovery and then flash the ROM,right?

[ROM][OFFICIAL][10.0] RevengeOS | Moto G6 [64 Bit] [DISCONTINUED]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RevengeOS is an aftermarket firmware based on AOSP. We are dedicated to a beautiful, fast, stable and minimal customized ROM, honesty and communication with our users, and openness with our code, Hope you will enjoy.
Please feel free to look, build, and use our code at RevengeOS GitHub.
Also, we got our Telegram Group to talk about the ROM, share some love, ideas or even have fun with us
Disclaimer: While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! If you have questions, ask your fellow users or ask us in Telegram Group
Download ROM here for your device!https://1pwn.tk/android/ali/RevengeQ/RevengeOS-3.2-Q-OFFICIAL-ali-20200713-0913.ziphttps://1pwn.tk/android/ali/RevengeQ/RevengeOS-3.2-Q-OFFICIAL-ali-20200713-0913.ziphttps://1pwn.tk/android/ali/RevengeQ/RevengeOS-3.2-Q-OFFICIAL-ali-20200713-0913.ziphttps://1pwn.tk/android/ali/RevengeQ/RevengeOS-3.2-Q-OFFICIAL-ali-20200713-0913.zip
What's Working
* Everything
BUGS:
* You tell me
Download the ROM
- Backup each and every partition from TWRP Recovery(optional)
- Make a full wipe (system, vendor, data, cache, dalvik)
- Flash RevengeOS Package
- Flash gapps
- Flash Magisk, only Canary version will work
- And at last Reboot!
[First boot will take few minutes! Have patience]
Clean Flash is always recommended!
If you want any bug to be fixed please write here on xda in detail. Give Logcats, mention your device name, mention if any mods and kernels, if used and please be specific about it. By helping us, you are helping yourself too.
->How to take Logcats?
https://goo.gl/UcTM9 and https://goo.gl/J4CSEP
Like my Work?
Buy me a Beer or Coffee
Donate
XDA:DevDB Information
Revenge OS, ROM for the Motorola Moto G6
Contributors
@Electimon
@erfanoabdi
All my testers
Source Code: https://github.com/RevengeOS
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: Unlocked bootloader, Custom recovery
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: Revenge OS
Stable Release Date: 2020-05-15
Created 2020-05-10
Last Updated 2020-07-13
2020-05-15:
Fixed some lags and fixed video bugs
This ROM has been discontinued, thank you for your support and thanks to the community for donating me this device for development purposes. After close to a year it has been a fun ride!

Great Rom, I'm one of the testers, I have the XT1925-3 everything works very well. Just Remember to use TWRP X64.

Does seem to be working. Congrats on getting a 64-bit rom working on this phone!
I did see some weirdness where the phone didn't think it was connected to WiFi during the google setup, even though it was. Didn't seem to really hurt anything though (it immediately connected and continued on).
I did manage to get magisk working. I wasn't entirely sure which version you were recommending or where to download a build from, so I just pulled it and built it myself. That forced an update on first use anyway.

Finally there was someone willing and able to let our Motorola G6 run 64-bit operating systems, congratulations on your beautiful work, I've been using the rom for a few days and it's very stable! Your work was our salvation, thank you!

Thanks for the first 64-bit custom ROM. I have a question, does NFC work? Because I have moto g6 XT1925-5 and has an NFC module.

Bi-Turbo said:
Thanks for the first 64-bit custom ROM. I have a question, does NFC work? Because I have moto g6 XT1925-5 and has an NFC module.
Click to expand...
Click to collapse
Yes afaik

nate1975 said:
Does seem to be working. Congrats on getting a 64-bit rom working on this phone!
I did see some weirdness where the phone didn't think it was connected to WiFi during the google setup, even though it was. Didn't seem to really hurt anything though (it immediately connected and continued on).
I did manage to get magisk working. I wasn't entirely sure which version you were recommending or where to download a build from, so I just pulled it and built it myself. That forced an update on first use anyway.
Click to expand...
Click to collapse
Gapps issue
I was recommending canary magisk but if yours works ^_^

@Electimon Thanks for the answer. You encouraged me to install this RevengeOS.

So can I use NFC to make payments? if this is how I configure it or does it work when installing the rom? thanks for your work friend

Tester here. Thank you Electi for your superb work. You do in three weeks what Motorola doesn't want to.
Congrats!
---------- Post added at 01:37 PM ---------- Previous post was at 01:36 PM ----------
lorenkordo said:
So can I use NFC to make payments? if this is how I configure it or does it work when installing the rom? thanks for your work friend
Click to expand...
Click to collapse
Payment are not ROM friendly. You must try and then tell us
---------- Post added at 01:40 PM ---------- Previous post was at 01:37 PM ----------
Before asking: we have not still a Google Cam ported to our phone. You must try many and then report please. Or make your own and share ...
---------- Post added at 01:41 PM ---------- Previous post was at 01:40 PM ----------
Hypercam works with issues

Wvanderlei21 said:
Great Rom, I'm one of the testers, I have the XT1925-3 everything works very well. Just Remember to use TWRP X64.
Click to expand...
Click to collapse
How can I install this rom? i was looking for an updated system for the moto g6, but i don't know how to install to try it out. As already reported above, it seems to me that the rom is very good for use. Could someone do a tutorial to install? I am a beginner in doing these procedures. ^_^

I tested again and the dual sim work correct on both sim

Thank you for this! I been waiting for a 64 bits rom for a long time, but I have a question I currently have the rom Lineage 16.0 on my device, do I need to go back to an stock rom? a guide would be appreciated.
(sorry my bad english)

kozk said:
Thank you for this! I been waiting for a 64 bits rom for a long time, but I have a question I currently have the rom Lineage 16.0 on my device, do I need to go back to an stock rom? a guide would be appreciated.
(sorry my bad english)
Click to expand...
Click to collapse
You don't need to go back. Download the 64bits recovery image from the link provided. You can flash it through your current 32bits recovery. After that, do the normal wipe... Dalvick , data and cache. Install the ROM, install gapps...

Lanreallenjay said:
You don't need to go back. Download the 64bits recovery image from the link provided. You can flash it through your current 32bits recovery. After that, do the normal wipe... Dalvick , data and cache. Install the ROM, install gapps...
Click to expand...
Click to collapse
Wow amazing! Thanks you.

OMG! I cant belive that we have an 64 bits rom. Thats sounds amazing!
i'm downloading right now.
I do have some questions, too
First: i'm using stock pie pps29.55-37-7 on xt1925-3 with magisk, boot.img signed and TWRP 32 bits.
To begin, i need update my twrp to 64 bits right? Then, after updated, i can flash this rom directly or i have to wipe system before flash this rom?
2nd: after 1st, i have to flash gapps then magisk?
i'm really sorry for newbie questions, but i lost 4 days months ago to get this rom rooted... is such a pain that motorola doesnt make an easy update like one plus or maybe samsung to get root etc.
oh, just an last question: can i use titanium backup and restore my actual apps in this rom? because since its an 64 bits system, i dont know if i could use to restore 32 bits apps.
thanks in advance!!

mdlgpt said:
OMG! I cant belive that we have an 64 bits rom. Thats sounds amazing!
i'm downloading right now.
I do have some questions, too
First: i'm using stock pie pps29.55-37-7 on xt1925-3 with magisk, boot.img signed and TWRP 32 bits.
To begin, i need update my twrp to 64 bits right? Then, after updated, i can flash this rom directly or i have to wipe system before flash this rom?
2nd: after 1st, i have to flash gapps then magisk?
i'm really sorry for newbie questions, but i lost 4 days months ago to get this rom rooted... is such a pain that motorola doesnt make an easy update like one plus or maybe samsung to get root etc.
oh, just an last question: can i use titanium backup and restore my actual apps in this rom? because since its an 64 bits system, i dont know if i could use to restore 32 bits apps.
thanks in advance!!
Click to expand...
Click to collapse
You only need to wipe data, because it is encrypted. Do it by fastboot erase userdata.
I think data backup made with 32 bits will not work. Not sure
Please write one question per entry

edukardo said:
You only need to wipe data, because it is encrypted. Do it by fastboot erase userdata.
I think data backup made with 32 bits will not work. Not sure
Please write one question per entry
Click to expand...
Click to collapse
Sorry about that, I thought that putting all the questions together in one post would be better.
I'm making an backup from whole phone in TWRP before doind any mods. I'll update here.

mdlgpt said:
Sorry about that, I thought that putting all the questions together in one post would be better.
I'm making an backup from whole phone in TWRP before doind any mods. I'll update here.
Click to expand...
Click to collapse
Let's go. It's a sweet

XT1925-6?
Will it work with XT1925-6?
And does Bluetooth audio work well?

Better Mobile App

welcome