Was stuck in recover loop (cwm),now in bootloop - Samsung Galaxy Grand Quattro

I am using a gt i8552 Samsung galaxy grand Quattro , rooted with kingo root.
somewhere in an article I read supersu is better
so I tried installing supersu me pro
. But It showed I was not rooted with king/kingo root. so
I flashed supersu.zip from cwm the recovery I used.
anyway after some time it showed a message update binary
there were 2 options 1) normal.........2)cwm/twrp
obviously I chose normal .
it said installation failed
. I chose cwm recovery fro that moment on whenever I chose reboot system now it would reboot to cwm.
then after trying some options like shutdown(wouldn't work even if I waited 2hours )
reboot to bootloader(the only place else I could go other than cwm)
I started surfing the internet . I got confused in a bootloop and recovery loop . I also tried flashing fixpermissions.zip
I tried factory resed wiped cache partition dalvik chache formatted /cache istalled a custom rom(cosmic rom for gti8552)
. thinking that it is a bootloop :silly: . then I understood and I flashed stock recovery( http://d-h.st/hcA ) <<<<<<biggest mistake of me all
now I am in a boot loop I cannot access bootloader nor recovery . all I can see is samsung
update > when Samsung appered I pulled out the battery put it again I saw galaxy grand quatrro :happy: I got into stock recovery somehow and rebooted but the it didn't even show Samsung
update> I am able to access stock recovery anything I can do
Thanks to pbhogal98
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
that problem was solved but........ Now I am in one more problem..........
I want to install custom ROM (cosmic rom)
But I cannot as of I cannot enter the recovery I have flashed twrp. Anything new was the triangle with ! Below Samsung but I could not enter recovery
...........
So I also tried cwm , I could not enter that also..
So I need another way to install custom ROM or way to fix that recovery

---

I would really love some advice plz

---

go to sammobile (google it)
download firmware and odin
go to download mode and flash firmware by odin

---

thx but.....
tejus said:
go to sammobile (google it)
download firmware and odin
go to download mode and flash firmware by odin
Click to expand...
Click to collapse
see the problem is as told in description I factory reset resulting in the usb debugging is not checked so I can not use odin as it does not add the device.

---

I can now access stock recovery . any help
can I use adb to istall the firmware.if so then how

---

No need
Just go to download mode and flash firmware using odin. There is no system to debug in download mode , so you don't need to enable debugging .

---

Using AP ? When I so connect it Odin does not show added any idea why then??

---

pbhogal98 said:
Just go to download mode and flash firmware using odin. There is no system to debug in download mode , so you don't need to enable debugging .
Click to expand...
Click to collapse
:good: https://www.kingoapp.com/root-tutorials/how-to-flash-samsung-stock-rom-via-odin.htm
Thanks turns out I did not open Odin with admin
:good::victory:thank you I shall try now

---

Just a small problem when I download GT-I8552 firmware it just fails
http://www.sammobile.com/firmwares/confirm/45107/I8552XXANJ1_I8552ODDANG1_INU/

---

pshyco<me;68809915 said:
Just a small problem when I download GT-I8552 firmware it just fails
http://www.sammobile.com/firmwares/confirm/45107/I8552XXANJ1_I8552ODDANG1_INU/
Click to expand...
Click to collapse
Firmware downloaded but. Complete (write) operation failed
All threads completed (succeed 0/failed 1)

---

I just changed USB port and I'm done:good::laugh::laugh::good::highfive:

---

pbhogal98 said:
Just go to download mode and flash firmware using odin. There is no system to debug in download mode , so you don't need to enable debugging .
Click to expand...
Click to collapse
Thank you very much buddy:highfive:

---

Try to select file in Odin if not able to select then there may be error in downloaded file.
Try downloading through IDM

---

Everything done turns out I was not using usb port 3
.0 now every single thing is back to normal

---

pshyco<me said:
Firmware downloaded but. Complete (write) operation failed
All threads completed (succeed 0/failed 1)
Click to expand...
Click to collapse
Use flashify

---

Y_A_S_H said:
Use flashify
Click to expand...
Click to collapse
Firmware was successful installed buddy I have a new problem see above

---

You should try usb jig if its works it might take you to download mode. And if you got stuck in cwm recovery loop just flash cwm again and make sure that you select auto reboot.