I was trying to root my galaxy y but after I flashed cwm 6.0.5.3, when I tried to flash the root package, it failed so when I tried to reboot but it says I'm missing root permission and boots back into cwm. What do I do?!
Frostmunch said:
I was trying to root my galaxy y but after I flashed cwm 6.0.5.3, when I tried to flash the root package, it failed so when I tried to reboot but it says I'm missing root permission and boots back into cwm. What do I do?!
Click to expand...
Click to collapse
If you don't have a nandroid backup, then you will need to reflash the stock firmware via Odin and start over.
I didn't make a nandroid backup but it doesn't bother me much about losing data. I tried using Odin but I can't seem to understand how to use it.
Sent from my GT-S7500 using XDA Free mobile app
If u don't have a nandroid backup u can get it from the internet ...
Frostmunch said:
I didn't make a nandroid backup but it doesn't bother me much about losing data. I tried using Odin but I can't seem to understand how to use it.
Sent from my GT-S7500 using XDA Free mobile app
Click to expand...
Click to collapse
There are a zillion guides around here, YouTube, etc on how it works. It's basically the same for almost any Samsung.
Download the appropriate firmware for your phone / carrier / region
Install drivers, if needed
Open Odin as Admin
Plug phone in Download Mode to PC
Odin should register phone as COM:XX where XX could be any numbers
Load the firmware in the PDA or AP slot, depending on which Odin version being used
After file is checked, hit Start
Wait patiently
Phone should reboot on it's own
If phone bootloops after successful flash, then reboot to the stock recovery and perform a factory data reset
es0tericcha0s said:
There are a zillion guides around here, YouTube, etc on how it works. It's basically the same for almost any Samsung.
Download the appropriate firmware for your phone / carrier / region
Install drivers, if needed
Open Odin as Admin
Plug phone in Download Mode to PC
Odin should register phone as COM:XX where XX could be any numbers
Load the firmware in the PDA or AP slot, depending on which Odin version being used
After file is checked, hit Start
Wait patiently
Phone should reboot on it's own
If phone bootloops after successful flash, then reboot to the stock recovery and perform a factory data reset
Click to expand...
Click to collapse
Thanks! It finally worked! I couldn't find the md5 files until i realised i had to unzip. :victory::victory:
Good job...
es0tericcha0s said:
There are a zillion guides around here, YouTube, etc on how it works. It's basically the same for almost any Samsung.
Download the appropriate firmware for your phone / carrier / region
Install drivers, if needed
Open Odin as Admin
Plug phone in Download Mode to PC
Odin should register phone as COM:XX where XX could be any numbers
Load the firmware in the PDA or AP slot, depending on which Odin version being used
After file is checked, hit Start
Wait patiently
Phone should reboot on it's own
If phone bootloops after successful flash, then reboot to the stock recovery and perform a factory data reset
Click to expand...
Click to collapse
Bro can u help me also............i was using CWM 5.x.x.x and then i flashed CWM 6.x.x.x....i flashed the Kitkat ROM but when i tried to reboot it, it went back to the CWM 6.x.x.x recovery mode
Then i tried to reflash using a the stock ROM, and also installed the GAPPS, but when i tried to reboot , it says it says "No Root Access, Root Device"
No matter what i select 'yes' or 'no' it says -->
It comes back to the CWM 6.x.x.x recovery mode
When i tried to reroot it using the "Update.zip"..........It says -->
E:Error in storage sdcard0 update.zip
(status 0)
Installation aborted
And No matter what i do it does not go out of the CWM 6.x.x.x Recovery Boot
I cleared the "Data", "Cache", "Dalvik Cache".................nothing worked
PLZ HELP:crying::crying::crying:
Related
Hi all,
I've been having a few issues with my S2 (Randomly resetting, freezing, etc) - so I decided to do a factory reset - but it hasn't worked.
When I turn my phone on, it wont go past the galaxy logo. I've tried holding down VOLUME UP, POWER, and HOME - but it doesn't boot it into recovery mode.
I've downloaded odin (the phone is rooted) and was told to download a new ROM and then use the PDA button on odin. But the only file type it expects is MD5, tar and SMD. Whenever I download a ROM, I just get a ZIP?
I'm probably being stupid. Could someone point me in the right direction? I don't care if I lose data, I just want the phone working.
Wazza26 said:
Hi all,
I've been having a few issues with my S2 (Randomly resetting, freezing, etc) - so I decided to do a factory reset - but it hasn't worked.
When I turn my phone on, it wont go past the galaxy logo. I've tried holding down VOLUME UP, POWER, and HOME - but it doesn't boot it into recovery mode.
I've downloaded odin (the phone is rooted) and was told to download a new ROM and then use the PDA button on odin. But the only file type it expects is MD5, tar and SMD. Whenever I download a ROM, I just get a ZIP?
I'm probably being stupid. Could someone point me in the right direction? I don't care if I lose data, I just want the phone working.
Click to expand...
Click to collapse
What ROM do you want to flash?
If it's a stock ROM, then extract the zip file and flash the contained tar/md5 file with Odin.
If it is a custom ROM and only provided as CWM-flashable zip file, then use a stock ROM to flash first and flash the custom ROM afterwards, when everything works again.
Here you can get the latest stock ROMs => http://forum.xda-developers.com/showthread.php?t=1544487, or pre-rooted stock ROMs from here => http://forum.xda-developers.com/showthread.php?t=1608071, or use Check Fus Downloader from here => http://fus.nanzen.se/ to check for the latest officiallly released firmware versions for your phone in your region and download it directly from Samsung servers.
It_ler said:
What ROM do you want to flash?
If it's a stock ROM, then extract the zip file and flash the contained tar/md5 file with Odin.
If it is a custom ROM and only provided as CWM-flashable zip file, then use a stock ROM to flash first and flash the custom ROM afterwards, when everything works again.
Here you can get the latest stock ROMs => http://forum.xda-developers.com/showthread.php?t=1544487, or pre-rooted stock ROMs from here => http://forum.xda-developers.com/showthread.php?t=1608071, or use Check Fus Downloader from here => http://fus.nanzen.se/ to check for the latest officiallly released firmware versions for your phone in your region and download it directly from Samsung servers.
Click to expand...
Click to collapse
Hi,
Thanks for the reply. I don't care which ROM I use - As long as I get the phone working again. I did download 7comp ROM but I couldn't find any .tar files?
I also converted the ZIP to a TAR but odin isn't picking it up ?!
OK - I've downloaded and installed the latest stock ROM you posted.
It seems to have installed, but doesn't go past the splash screen which says samsung galaxy Sii
Any ideas?
[EDIT] - Phone fixed. I was able to load it into recovery mode and cleared cache. woo
Well done ...now try to go on recovery mode ...if should be able to go....do full wipe...then clear delvik cache...then advance- fix permission ..
Then reboot system ....you are done...
Don't forget to say thanks..
Sent from my GT-I9100 using xda premium
Attempted to root the phone but it didn't work.
I followed a set of instructions, and was asked to wait for the phone to reboot. It now has the "!" rooted icon but won't go past the rooted screen.
System restore and clearing cache doesn't set it back to factory default. Any ideas?
Wazza26 said:
Attempted to root the phone but it didn't work.
I followed a set of instructions, and was asked to wait for the phone to reboot. It now has the "!" rooted icon but won't go past the rooted screen.
System restore and clearing cache doesn't set it back to factory default. Any ideas?
Click to expand...
Click to collapse
May i know what u did???
xDa_nightfury said:
May i know what u did???
Click to expand...
Click to collapse
Sorry for late reply. I followed a video on youtube showing you how to root the phone. It looked succesfull as the "!" did appear, but it wouldn't go past that.
So I rolled it back using the original ROM and have given up on rooting it. It's a shame as I really liked Jelly Bean
Wazza26 said:
Sorry for late reply. I followed a video on youtube showing you how to root the phone. It looked succesfull as the "!" did appear, but it wouldn't go past that.
So I rolled it back using the original ROM and have given up on rooting it. It's a shame as I really liked Jelly Bean
Click to expand...
Click to collapse
to root ur phone, just dwnld the .tar file of Siyah v4.1.5 fro the link below, then put ur phone into Dwnld mode and connect to ODIN in ur PC and flash by putting the siyah kernel file(.tar) in PDA section, ur phone will be rooted
http://www.gokhanmoral.com/gm/2012/09/08/siyahkernel-s2-v4-1/
PS- do see that u dwnld the file meant to flash by ODIN ie Download tar (for Odin)
Just flash a siyah v.4 rooted kernel through odin.
i just rooted for the 1st time with cwm then i was able to switch it to twrp. then i made a backup, then installed CM10. but i failed badly...i never deleted the 2 caches.
nor did i wipe it / reset it, for fear i would lose all my settings/apps/contacts/etc... i know i have the backup but i still didn't think it was necessary.
can anyone tell me where i go from here?
i tried holding down all 3 buttons, it just vibrates, then reboots and starts the loop again. i went into recovery mode with vol down & power buttons. since i don't have a tar file for twrp, i had to go with the tar file from odin. then it rebooted but it went back to the loop.
i just pulled the battery out and let it sit for a minute. turned it on and it is still CM10 looping.
thanks in advance for any advice!
ARTAQaf said:
i just rooted for the 1st time with cwm then i was able to switch it to twrp. then i made a backup, then installed CM10. but i failed badly...i never deleted the 2 caches.
nor did i wipe it / reset it, for fear i would lose all my settings/apps/contacts/etc... i know i have the backup but i still didn't think it was necessary.
can anyone tell me where i go from here?
i tried holding down all 3 buttons, it just vibrates, then reboots and starts the loop again. i went into recovery mode with vol down & power buttons. since i don't have a tar file for twrp, i had to go with the tar file from odin. then it rebooted but it went back to the loop.
i just pulled the battery out and let it sit for a minute. turned it on and it is still CM10 looping.
thanks in advance for any advice!
Click to expand...
Click to collapse
You can try using odin and flashing the twrp tar file and you can find that here.
or you can use kies to do an emergency firmware update. It will blitz everything on your phone (except your external memory) and reinstall android version 4.1.2. Then you can root properly and know nothing is botched up.
To update to latest firmware (from any rom even rooted)
1. On a PC open http://www.samsung.com/us/kies/
2. Click Download for windows
3. Install Kies
4. Open Kies
5. Write down serial number of phone device (it's under battery)
6. Plug in phone to PC and power up phone while HOLDING volume down
7. Once you see the download screen on phone press volume up
8. On PC in Kies click "tools - Firmware Upgrade and Initialization"
9. Type in SGH-I717 (all caps)
10. Type in serial number
11. Follow directions
12. Once phone reboots you will have the latest OFFICIAL AT&T firmware (JB 4.1.2 as of 6-1-2013)
13. Perform a factory data reset before proceeding (it helps it run smoother)
14. Type in google info and enjoy!
To root the stock 4.1.2 rom
1. Use Odin 1.85 in Admin Mode for Windows users.
2. Install TWRP 2.5 via PDA settings.
3. Reboot phone into Recovery.
4. Install SuperSU via the Zip.
5. Reboot phone and Presto!
Your now on the latest software for the i717, rooted, and have twrp recovery installed. Enjoy or flash any rom of your choice!
440bro said:
You can try using odin and flashing the twrp tar file and you can find that here.
or you can use kies to do an emergency firmware update. It will blitz everything on your phone (except your external memory) and reinstall android version 4.1.2. Then you can root properly and know nothing is botched up.
To update to latest firmware (from any rom even rooted)
1. On a PC open http://www.samsung.com/us/kies/
2. Click Download for windows
3. Install Kies
4. Open Kies
5. Write down serial number of phone device (it's under battery)
6. Plug in phone to PC and power up phone while HOLDING volume down
7. Once you see the download screen on phone press volume up
8. On PC in Kies click "tools - Firmware Upgrade and Initialization"
9. Type in SGH-I717 (all caps)
10. Type in serial number
11. Follow directions
12. Once phone reboots you will have the latest OFFICIAL AT&T firmware (JB 4.1.2 as of 6-1-2013)
13. Perform a factory data reset before proceeding (it helps it run smoother)
14. Type in google info and enjoy!
To root the stock 4.1.2 rom
1. Use Odin 1.85 in Admin Mode for Windows users.
2. Install TWRP 2.5 via PDA settings.
3. Reboot phone into Recovery.
4. Install SuperSU via the Zip.
5. Reboot phone and Presto!
Your now on the latest software for the i717, rooted, and have twrp recovery installed. Enjoy or flash any rom of your choice!
Click to expand...
Click to collapse
thanks! being a noob, when i goto the teamwin link i download the only 2 downloads they have there...1 is the goo zip the other says it's the twrp zip. i put them in a twrp folder i made and unzip them both there (since i am not sure which is neededwith 7zip. when i go into odin mode, i click pda and when it goes to open the needed file in that twrp folder i made it only sees an MD5 file and when i click that, odin freezes (Not Responding) and i have to force it closed. am i missing something?
thankx in advance for any assistance :cyclops:
ARTAQaf said:
thanks! being a noob, when i goto the teamwin link i download the only 2 downloads they have there...1 is the goo zip the other says it's the twrp zip. i put them in a twrp folder i made and unzip them both there (since i am not sure which is neededwith 7zip. when i go into odin mode, i click pda and when it goes to open the needed file in that twrp folder i made it only sees an MD5 file and when i click that, odin freezes (Not Responding) and i have to force it closed. am i missing something?
thankx in advance for any assistance :cyclops:
Click to expand...
Click to collapse
I see more than 2 options for downloads in twrp. The one you should be using with odin is this one http://goo.im/devs/OpenRecovery/sgh-i717/openrecovery-twrp-2.5.0.0-quincyatt.img.tar
don't unzip, open, or do anything with it. Just place it in the PDA section of odin and hit start.
If that fails use kies.
that file i cant find on the link, but thanks 440!!! Odin would get stuck at "Setup connection," so it wasn't working. tried it again and it said it did work, "passed," but still no changes from tthe CM10 loop.
i was desperate not to use Kies and lose everything. so i started messing around with different buttons. i pressed and held both volume buttons and power button again...it powered off and nothing. tried it again and this time i saw the teamwin logo!! i was able to then click restore on the Gnote's screen and now it is restoring my twrp back up from yesterday. i guess that last attempt on Odin paid off.
just rebooted it and voila, all is perfect again.
thanks for your quick assistance 440!!! :good::good::good:
so now if i try CM10 again, when i "wipe" it (i think that is the wording) will that wipe all my txt's, call history, photos, contacts, S memo's, etc...???
ARTAQaf said:
that file i cant find on the link, but thanks 440!!! Odin would get stuck at "Setup connection," so it wasn't working. tried it again and it said it did work, "passed," but still no changes from tthe CM10 loop.
i was desperate not to use Kies and lose everything. so i started messing around with different buttons. i pressed and held both volume buttons and power button again...it powered off and nothing. tried it again and this time i saw the teamwin logo!! i was able to then click restore on the Gnote's screen and now it is restoring my twrp back up from yesterday. i guess that last attempt on Odin paid off.
just rebooted it and voila, all is perfect again.
thanks for your quick assistance 440!!! :good::good::good:
so now if i try CM10 again, when i "wipe" it (i think that is the wording) will that wipe all my txt's, call history, photos, contacts, S memo's, etc...???
Click to expand...
Click to collapse
Before you wipe make sure to do a complete back up, download sms backup or super backup to back up contacts, texts etc... Download app2zip or Titanium to back up your apps.
Here's the process I go through each time. Each time you will lose everything but is safer and have a better chance of not failing:
In TWRP
Factory reset
Wipe System
Wipe cache and dalvik cache
Install your rom and the gapps
Wipe cache and dalvik again
reboot and let the phone sit for about 10mins, then reboot again and all should be good.
Once phone is up and running, if you did app2zip to back up your apps, you have to go back into recovery and flash that zip and install the backups from sms backup or super backup for your contacts, texts etc....
Hope that helped some.
READ ALL THE INSTRUCTIONS.
DON'T FORGET TO BACKUP YOUR EFS FILES AND NANDROID BACKUP
WARRNING : YOUR ARE DOING THIS ON YOUR OWN RISK !
instructions to Flash TWRP on your GT-i9300 using Odin:
1- download the latest Odin ver. ( http://forum.xda-developers.com/showthread.php?t=1738841 )
Or download Odin Via mobile.
2- download the latest .tar of TWRP ( http://techerrata.com/browse/twrp2/i9300 )
3- put your device in download ( home + power + Down )
4- open Odin as administrator
5- check Auto Reboot and F.Reset Time ONLY !
6- put your .tar File in PDA part only.
7- dont unplug your device till you see the Blue sign of DONE!
Volla now you're on TWRP latest version
( FOR MORE INFO : http://teamw.in/project/twrp2/114 )
darki0xox said:
can anyone provide me with link for 2.7.0.0 of TWRP for GT-i9300
and i have CWM already , does it affect anything when i flash the TWRP ?
Click to expand...
Click to collapse
You could try the zip in this post: http://forum.xda-developers.com/gal...-2-6-3-0-touch-recovery-t1943592/post50943534
Then you could just flash that using CWM. And yes it does affect things when you flash it as it changes your recovery from CWM to TWRP which is more touch screen based, easier to use as well as being a lot more powerful than a basic CWM. Having changed you may find TWRP doesn't find your previous backups. This is usually as both of those recoveries tend to save them in different places and it's just looking in the wrong place for the files. You can either change the settings to a CWM style restore or just run a new backup through TWRP and delete the old CWM one.
pjcarrmole said:
You could try the zip in this post: http://forum.xda-developers.com/gal...-2-6-3-0-touch-recovery-t1943592/post50943534
Then you could just flash that using CWM. And yes it does affect things when you flash it as it changes your recovery from CWM to TWRP which is more touch screen based, easier to use as well as being a lot more powerful than a basic CWM. Having changed you may find TWRP doesn't find your previous backups. This is usually as both of those recoveries tend to save them in different places and it's just looking in the wrong place for the files. You can either change the settings to a CWM style restore or just run a new backup through TWRP and delete the old CWM one.
Click to expand...
Click to collapse
thanks , and i made this post like a tutorial ^_^ <3
Guys, everytime I flash twrp using ODIN it goes down as a success. And it reboots the phone. But then I shut down the phone and reboot to recovery its once again the default Samsung Recovery. The phone is not rooted. How do I prevent the original recovery from overwriting the TWRP recovery?
lurker316 said:
Guys, everytime I flash twrp using ODIN it goes down as a success. And it reboots the phone. But then I shut down the phone and reboot to recovery its once again the default Samsung Recovery. The phone is not rooted. How do I prevent the original recovery from overwriting the TWRP recovery?
Click to expand...
Click to collapse
Just use the TWRP Manager from the Play Store. Root the phone http://forum.xda-developers.com/showpost.php?p=33305792&postcount=3 and install the manager.
@lurker316: forget TWRP-manager. The only extra step, you need, is a factory reset. So backup all your data before. To avoid reboot after flashing TWRP, either uncheck reboot in Odin or pull out battery after succeeded flash.
Hi guys, i have a problem with my phone, I tryed to re-root it after upgrading to android 4.3, now the only response i get from the phone is download mode and that happens only when it's plugged in, I applied this TWRP but i still have the same problem. please if anyone has an idea, help!
here's my post if you need more details:
http://forum.xda-developers.com/galaxy-s3/help/s3-boot-plug-computer-to-download-mode-t3380912
a reply from a dear xda person
lurker316 said:
Guys, everytime I flash twrp using ODIN it goes down as a success. And it reboots the phone. But then I shut down the phone and reboot to recovery its once again the default Samsung Recovery. The phone is not rooted. How do I prevent the original recovery from overwriting the TWRP recovery?
Click to expand...
Click to collapse
try turning off auto reboot sometimes samsung reverts itsel to the stock recovery
cuz samsung knows evrything
I think I soft brick my device, after formatting and wiping data using recovery mode, when powering on the device it's stuck with the Samsung Logo I've tried to download a firmwire from sanmobile website but it seems that my firmware file is not found:
http://dl.sammobile.com/JF9cQlk5PyQ...FLDRoYU05MXlBK/P7510JKLP3_P7510ILOLP1_ILO.zip
When connecting the device to the computer I can't see it in "My Computer" but Odin is recognize him, please advice!
no need to worry , just download anyone of the stock firmwares and flash with odin is alright.
Yes manged to return the original Samsung rom. The problem is that I'm having only total of 2GIG space on my SD card. Any advise?
Sent from my GT-I9300 using Tapatalk
Format SD card
Sent from my GT-I9305 using XDA Premium 4 mobile app
Did thus didn't work
Sent from my GT-I9300 using Tapatalk
I formted SD card, wipe cache, etc... nothing fixed it
Sent from my GT-P7510 using Tapatalk
You mean after all these procedure, you still have only 2gb space? If this is the case, I suggest you flash stock firmware with Odin. Then format the SD card.
I am not an expert but it works for me.
Sent from my GT-I9305 using XDA Premium 4 mobile app
You had the same issue? Can you please elaborate more on what exactly flash stock format?
Sent from my GT-I9300 using Tapatalk
eddiemiller21 said:
You had the same issue? Can you please elaborate more on what exactly flash stock format?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Here is the procedure of what I did:
1) copy those file I wanted to back up to my pc
2) boot into download mode, flash stock frimware which I downloaded from sammobile.com( see the attached pic) using Odin
3) boot into download mode ( see attached pic) again, press the left volume button , and then the right volume button to go into the stock recovery, then wipe cache and wipe dalvik cache, then reboot
3) after boot up, root, flash cwm recovery ( latest version is v6.0.3.1), reboot to cwm recovery and inside mounts and storage manu, choose format /sdcard, then reboot
4) check the storage in the settings to see if it is alright, if so, it's done.
5) go to cwm recovery and backup.
6) you could do whatever you want , if things go wrong, restore the backup image from cwm recovery.
anguslaw said:
Here is the procedure of what I did:
1) copy those file I wanted to back up to my pc
2) boot into download mode, flash stock frimware which I downloaded from sammobile.com( see the attached pic) using Odin
3) boot into download mode ( see attached pic) again, press the left volume button , and then the right volume button to go into the stock recovery, then wipe cache and wipe dalvik cache, then reboot
3) after boot up, root, flash cwm recovery ( latest version is v6.0.3.1), reboot to cwm recovery and inside mounts and storage manu, choose format /sdcard, then reboot
4) check the storage in the settings to see if it is alright, if so, it's done.
5) go to cwm recovery and backup.
6) you could do whatever you want , if things go wrong, restore the backup image from cwm recovery.
Click to expand...
Click to collapse
Hey thank you for the guide!
I follow your instructions but I'm afraid things got wrose, I coudn't find the firmware from: sammobile (P7510 Wifi - Israel)
for some reason File not found so I download it from a diffrent site, and when I'm using Odin to flash this it's failed and I'm getting the message:
<OSM> All threads completed. (succeed 0 / failed 1)
Nothing is loading now, when booting i'm getting an error:
"firmware updatede encountered an in issue please select recovery mode in Kies & try again"
:crying:
Please advise
eddiemiller21 said:
Hey thank you for the guide!
I follow your instructions but I'm afraid things got wrose, I coudn't find the firmware from: sammobile (P7510 Wifi - Israel)
for some reason File not found so I download it from a diffrent site, and when I'm using Odin to flash this it's failed and I'm getting the message:
<OSM> All threads completed. (succeed 0 / failed 1)
Nothing is loading now, when booting i'm getting an error:
"firmware updatede encountered an in issue please select recovery mode in Kies & try again"
:crying:
Please advise
Click to expand...
Click to collapse
Quick update, I manage to return to the original rom but when I'm unlocking the screen the screen is flickering
eddiemiller21 said:
Quick update, I manage to return to the original rom but when I'm unlocking the screen the screen is flickering
Click to expand...
Click to collapse
Did you flash the full firmware via ODIN? You can download from here, look for the file that belongs to your region.
Otherwise, if you don't want to re-flash firmware, search for a compatible bootloader and flash it in ODIN.
I am using a gt i8552 Samsung galaxy grand Quattro , rooted with kingo root.
somewhere in an article I read supersu is better
so I tried installing supersu me pro
. But It showed I was not rooted with king/kingo root. so
I flashed supersu.zip from cwm the recovery I used.
anyway after some time it showed a message update binary
there were 2 options 1) normal.........2)cwm/twrp
obviously I chose normal .
it said installation failed
. I chose cwm recovery fro that moment on whenever I chose reboot system now it would reboot to cwm.
then after trying some options like shutdown(wouldn't work even if I waited 2hours )
reboot to bootloader(the only place else I could go other than cwm)
I started surfing the internet . I got confused in a bootloop and recovery loop . I also tried flashing fixpermissions.zip
I tried factory resed wiped cache partition dalvik chache formatted /cache istalled a custom rom(cosmic rom for gti8552)
. thinking that it is a bootloop :silly: . then I understood and I flashed stock recovery( http://d-h.st/hcA ) <<<<<<biggest mistake of me all
now I am in a boot loop I cannot access bootloader nor recovery . all I can see is samsung
update > when Samsung appered I pulled out the battery put it again I saw galaxy grand quatrro :happy: I got into stock recovery somehow and rebooted but the it didn't even show Samsung
update> I am able to access stock recovery anything I can do
Thanks to pbhogal98
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
that problem was solved but........ Now I am in one more problem..........
I want to install custom ROM (cosmic rom)
But I cannot as of I cannot enter the recovery I have flashed twrp. Anything new was the triangle with ! Below Samsung but I could not enter recovery
...........
So I also tried cwm , I could not enter that also..
So I need another way to install custom ROM or way to fix that recovery
I would really love some advice plz
go to sammobile (google it)
download firmware and odin
go to download mode and flash firmware by odin
thx but.....
tejus said:
go to sammobile (google it)
download firmware and odin
go to download mode and flash firmware by odin
Click to expand...
Click to collapse
see the problem is as told in description I factory reset resulting in the usb debugging is not checked so I can not use odin as it does not add the device.
I can now access stock recovery . any help
can I use adb to istall the firmware.if so then how
No need
Just go to download mode and flash firmware using odin. There is no system to debug in download mode , so you don't need to enable debugging .
Using AP ? When I so connect it Odin does not show added any idea why then??
pbhogal98 said:
Just go to download mode and flash firmware using odin. There is no system to debug in download mode , so you don't need to enable debugging .
Click to expand...
Click to collapse
:good: https://www.kingoapp.com/root-tutorials/how-to-flash-samsung-stock-rom-via-odin.htm
Thanks turns out I did not open Odin with admin
:good::victory:thank you I shall try now
Just a small problem when I download GT-I8552 firmware it just fails
http://www.sammobile.com/firmwares/confirm/45107/I8552XXANJ1_I8552ODDANG1_INU/
pshyco<me;68809915 said:
Just a small problem when I download GT-I8552 firmware it just fails
http://www.sammobile.com/firmwares/confirm/45107/I8552XXANJ1_I8552ODDANG1_INU/
Click to expand...
Click to collapse
Firmware downloaded but. Complete (write) operation failed
All threads completed (succeed 0/failed 1)
I just changed USB port and I'm done:good::laugh::laugh::good::highfive:
pbhogal98 said:
Just go to download mode and flash firmware using odin. There is no system to debug in download mode , so you don't need to enable debugging .
Click to expand...
Click to collapse
Thank you very much buddy:highfive:
Try to select file in Odin if not able to select then there may be error in downloaded file.
Try downloading through IDM
Everything done turns out I was not using usb port 3
.0 now every single thing is back to normal
pshyco<me said:
Firmware downloaded but. Complete (write) operation failed
All threads completed (succeed 0/failed 1)
Click to expand...
Click to collapse
Use flashify
Y_A_S_H said:
Use flashify
Click to expand...
Click to collapse
Firmware was successful installed buddy I have a new problem see above
You should try usb jig if its works it might take you to download mode. And if you got stuck in cwm recovery loop just flash cwm again and make sure that you select auto reboot.