I think I soft brick my device, after formatting and wiping data using recovery mode, when powering on the device it's stuck with the Samsung Logo I've tried to download a firmwire from sanmobile website but it seems that my firmware file is not found:
http://dl.sammobile.com/JF9cQlk5PyQ...FLDRoYU05MXlBK/P7510JKLP3_P7510ILOLP1_ILO.zip
When connecting the device to the computer I can't see it in "My Computer" but Odin is recognize him, please advice!
no need to worry , just download anyone of the stock firmwares and flash with odin is alright.
Yes manged to return the original Samsung rom. The problem is that I'm having only total of 2GIG space on my SD card. Any advise?
Sent from my GT-I9300 using Tapatalk
Format SD card
Sent from my GT-I9305 using XDA Premium 4 mobile app
Did thus didn't work
Sent from my GT-I9300 using Tapatalk
I formted SD card, wipe cache, etc... nothing fixed it
Sent from my GT-P7510 using Tapatalk
You mean after all these procedure, you still have only 2gb space? If this is the case, I suggest you flash stock firmware with Odin. Then format the SD card.
I am not an expert but it works for me.
Sent from my GT-I9305 using XDA Premium 4 mobile app
You had the same issue? Can you please elaborate more on what exactly flash stock format?
Sent from my GT-I9300 using Tapatalk
eddiemiller21 said:
You had the same issue? Can you please elaborate more on what exactly flash stock format?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Here is the procedure of what I did:
1) copy those file I wanted to back up to my pc
2) boot into download mode, flash stock frimware which I downloaded from sammobile.com( see the attached pic) using Odin
3) boot into download mode ( see attached pic) again, press the left volume button , and then the right volume button to go into the stock recovery, then wipe cache and wipe dalvik cache, then reboot
3) after boot up, root, flash cwm recovery ( latest version is v6.0.3.1), reboot to cwm recovery and inside mounts and storage manu, choose format /sdcard, then reboot
4) check the storage in the settings to see if it is alright, if so, it's done.
5) go to cwm recovery and backup.
6) you could do whatever you want , if things go wrong, restore the backup image from cwm recovery.
anguslaw said:
Here is the procedure of what I did:
1) copy those file I wanted to back up to my pc
2) boot into download mode, flash stock frimware which I downloaded from sammobile.com( see the attached pic) using Odin
3) boot into download mode ( see attached pic) again, press the left volume button , and then the right volume button to go into the stock recovery, then wipe cache and wipe dalvik cache, then reboot
3) after boot up, root, flash cwm recovery ( latest version is v6.0.3.1), reboot to cwm recovery and inside mounts and storage manu, choose format /sdcard, then reboot
4) check the storage in the settings to see if it is alright, if so, it's done.
5) go to cwm recovery and backup.
6) you could do whatever you want , if things go wrong, restore the backup image from cwm recovery.
Click to expand...
Click to collapse
Hey thank you for the guide!
I follow your instructions but I'm afraid things got wrose, I coudn't find the firmware from: sammobile (P7510 Wifi - Israel)
for some reason File not found so I download it from a diffrent site, and when I'm using Odin to flash this it's failed and I'm getting the message:
<OSM> All threads completed. (succeed 0 / failed 1)
Nothing is loading now, when booting i'm getting an error:
"firmware updatede encountered an in issue please select recovery mode in Kies & try again"
:crying:
Please advise
eddiemiller21 said:
Hey thank you for the guide!
I follow your instructions but I'm afraid things got wrose, I coudn't find the firmware from: sammobile (P7510 Wifi - Israel)
for some reason File not found so I download it from a diffrent site, and when I'm using Odin to flash this it's failed and I'm getting the message:
<OSM> All threads completed. (succeed 0 / failed 1)
Nothing is loading now, when booting i'm getting an error:
"firmware updatede encountered an in issue please select recovery mode in Kies & try again"
:crying:
Please advise
Click to expand...
Click to collapse
Quick update, I manage to return to the original rom but when I'm unlocking the screen the screen is flickering
eddiemiller21 said:
Quick update, I manage to return to the original rom but when I'm unlocking the screen the screen is flickering
Click to expand...
Click to collapse
Did you flash the full firmware via ODIN? You can download from here, look for the file that belongs to your region.
Otherwise, if you don't want to re-flash firmware, search for a compatible bootloader and flash it in ODIN.
Related
I recently tried to install android revolution hd 2.2.0 and ran super wipe.I have put the rom on the sdcard too,so it isn't anymore and the normal bootup doesn't work,I am stuck in recovery and need a way to put that rom there to flash it..does the window explorer work in recovery mode?
ghostvirtual said:
I recently tried to install android revolution hd 2.2.0 and ran super wipe.I have put the rom on the sdcard too,so it isn't anymore and the normal bootup doesn't work,I am stuck in recovery and need a way to put that rom there to flash it..does the window explorer work in recovery mode?
Click to expand...
Click to collapse
If you have the stock Rom flash it via Odin.
Cwm sometimes mounts the external sd card but sometimes doesn't.. don't know how it is for others but it isn't working properly for me.
Go to mount and storage in Cwm for mounting sdcard.
Sent from my GT-I9300
123shree said:
If you have the stock Rom flash it via Odin.
Cwm sometimes mounts the external sd card but sometimes doesn't.. don't know how it is for others but it isn't working properly for me.
Go to mount and storage in Cwm for mounting sdcard.
Sent from my GT-I9300
Click to expand...
Click to collapse
I removed the battery because it was not charging and I thought I won't can flash any rom with the battery low,so I will seek more advices before turning it back on,so..
Wipe removed all my files,including stock rom,but I don't know if volume down + power + home button will work.Well I went into choose zip from sdcard and they all were there,I ran super wipe as it was said in the flash tutorial and it deleted almost everything,I am stuck into recovery and I cannot enter sdcard because there are no files anymore,such as the rom needed to be flashed.
If I mount sdcard n the mount and storage in cwm will windows explorer be able to put the rom back there? So i can flash it with.
update: volume down+home+power works perfectly,should I flash the rom with odin directly? the sdcard is empty too.
ghostvirtual said:
I removed the battery because it was not charging and I thought I won't can flash any rom with the battery low,so I will seek more advices before turning it back on,so..
Wipe removed all my files,including stock rom,but I don't know if volume down + power + home button will work.Well I went into choose zip from sdcard and they all were there,I ran super wipe as it was said in the flash tutorial and it deleted almost everything,I am stuck into recovery and I cannot enter sdcard because there are no files anymore,such as the rom needed to be flashed.
If I mount sdcard n the mount and storage in cwm will windows explorer be able to put the rom back there? So i can flash it with.
update: volume down+home+power works perfectly,should I flash the rom with odin directly? the sdcard is empty too.
Click to expand...
Click to collapse
If you can get into download mode then you should easily be able to flash via Odin.
Do a search in the forum because there are many guides about flashing through Odin.
Sent from my GT-I9300
123shree said:
If you can get into download mode then you should easily be able to flash via Odin.
Do a search in the forum because there are many guides about flashing through Odin.
Sent from my GT-I9300
Click to expand...
Click to collapse
I will flash stock rom then I will try again to do android revolution hd 2.2.0 ( the step I missed is about creating a virtual ssd )
I will come with an update if the flash stock rom through odin works.
Checkrom comes in two versions,one is Odin flashable,flash that.then u are rooted after flashing
Next time u use superwipe remember to move the rom to EXTERNAL SD-card ,because internal SD-card is wiped.
Weird..odin exits after a while it says Please wait then it quits,while trying to flash stock rom,what's the problem?
I found a way to put the rom back there,but it is in sdcard,and I cannot enter it ( cannot mount )
How can I solve this from the recovery mode? I am still stuck in recovery mode or download mode..and the rom is on the card now,but cannot access to flash it with cwm
Why do not you just boot?
Previous rom is there but wiped and restored.
I do not think that superwipe was made to empty system from the rom.
Sent from my GT-I9300 using xda premium
mariosraptor said:
Why do not you just boot?
Previous rom is there but wiped and restored.
I do not think that superwipe was made to empty system from the rom.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
The rom had to be put on a virtual/external sdcard,but because I didn't read carefully I put it on sdcard aslong with superwipe,so after I launched superwipe it deleted the sdcard files and the stock OS too,so it just says samsung galaxy siii like before it boots,but it stays that way..
I don't know how to get into the sdcard,cwm recovery says it cannot mount it,sdcard contains my rom,and because I cannot access it,I cannot flash it..I need a way to help cwm to mount sdcard,so I can flash it from there..
Otherwise I tried flashing stock rom but odin crashes,like I press start,then it says check md5 then Please wait,it gets stuck and quits..
Which recovery do you have? Is it the touch cwm?
Flash 5.5.0.4 1.5 from chainfire. Make sure when running odin nothing from kies is running in the background and make sure you do not tick re-partition.
Sent from my GT-I9300 using xda premium
mariosraptor said:
Which recovery do you have? Is it the touch cwm?
Flash 5.5.0.4 1.5 from chainfire. Make sure when running odin nothing from kies is running in the background and make sure you do not tick re-partition.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
It is not touch cwm..it is a normal cwm from what I have seen.
Can you give me the exact version ( including link )to flash with odin? I think it does not charge and I always get off the battery from it when I try something new and it does not work.
edit: CWM-based Recovery v5.5.0.4 :: CF -v1.3
I got it from..flashing the recovery.img
ghostvirtual said:
It is not touch cwm..it is a normal cwm from what I have seen.
Can you give me the exact version ( including link )to flash with odin? I think it does not charge and I always get off the battery from it when I try something new and it does not work.
edit: CWM-based Recovery v5.5.0.4 :: CF -v1.3
I got it from..flashing the recovery.img
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1695238 post #3
CF-Root for SGS3 v6.4:
Root: SuperSU v0.93
Recovery: CWM v5.5 :: CF-v1.5
Util: CWM Manager v3.60
mariosraptor said:
http://forum.xda-developers.com/showthread.php?t=1695238 post #3
CF-Root for SGS3 v6.4:
Root: SuperSU v0.93
Recovery: CWM v5.5 :: CF-v1.5
Util: CWM Manager v3.60
Click to expand...
Click to collapse
Ok I will try right now,but what will it help me with? Will I can mount sdcard?
edit: flashed it and it went into recovery
update: Now it is CWM-based Recovery v5.5.0.4:: CF v1.5 and the mount sdcard doesn't work yet..
Then i need to tell you that you must flash through Odin a full rom then reroot and then flash again a custom rom of your choice.
Just make sure every time you flash with Odin nothing from Kies runs in the background. Otherwise Odin flash will fail or stuck.
Edit: Please remember and NOT TICK REPARTITION.
Sent from my GT-I9300 using xda premium
mariosraptor said:
Then i need to tell you that you must flash through Odin a full rom then reroot and then flash again a custom rom of your choice.
Just make sure every time you flash with Odin nothing from Kies runs in the background. Otherwise Odin flash will fail or stuck.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
http://i.imgur.com/kJaFo.png ( when i try to flash via odin )
Do you have teamviewer and know some hidden processes from kies? I even uninstalled kies and let the normal usb drivers be installed
ghostvirtual said:
http://i.imgur.com/kJaFo.png ( when i try to flash via odin )
Do you have teamviewer and know some hidden processes from kies? I even uninstalled kies and let the normal usb drivers be installed
Click to expand...
Click to collapse
What's the problem?
Its checking md5, that takes a few minutes.
Boot into download mode (volume down+home+power, press up when it says are you sure) then flash via Odin.
Its simple.
Sent from my GT-I9300 using xda premium
Actually i prefer Odin 1.84. It never gives me any trouble.
Sent from my GT-I9300 using xda premium
mariosraptor said:
Actually i prefer Odin 1.84. It never gives me any trouble.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Agreed.
Sent from my GT-I9300 using xda premium
nodstuff said:
What's the problem?
Its checking md5, that takes a few minutes.
Boot into download mode (volume down+home+power, press up when it says are you sure) then flash via Odin.
Its simple.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Ok,thanks a lot Back to stock..now I will try to run the custom rom again,can someone help me via skype or something through the steps? I don't want to make the same mistake again..
Hello every body :
I have a problem with my samsung galaxy mini 2 GT-S6500D ,
Firstly I have installed jellybean 4.2.2 custom rom , but I found some problem with it ( like white screen ) .
So I decided to flash back the official stock firmware 2.3.6 by odin ( I do that without entering recovery mode and wipe cache/data ) problem arise and I got the following :
1- My phone stucks at the samsung logo screen and reboots till I remove the battery to stop rebooting . I tried to reinstall the stock firmware again but still no solution .
2- I cannot get into recovery mode to wipe cache and factory reset , When I press the keys volume up + volume down + home key + power key , phone won`t start and thus no recovery mode menu .
3- I installed cwm-6.0.3.3-jena.tar.md5 custom recovery using odin but still cannot get into recovery mode .
ANY SOLUTION ,,,,, PLEASE HELP ????
regards
drali8888 said:
3- I installed cwm-6.0.3.3-jena.tar.md5 custom recovery using odin but still cannot get into recovery mode .
Click to expand...
Click to collapse
when you flash CWM only, untick reboot in Odin3 after flash is successful, power down by battery pull and enter CWM recovery by combo keys to do the wipes including dalvik cache in advanced and try again flashing
other solutions look below in My Android solutions.
Check this out! You , YES! you are an " Android ". Not your phone but U.
xsenman said:
when you flash CWM only, untick reboot in Odin3 after flash is successful, power down by battery pull and enter CWM recovery by combo keys to do the wipes including dalvik cache in advanced and try again flashing
other solutions look below in My Android solutions.
Check this out! You , YES! you are an " Android ". Not your phone but U.
Click to expand...
Click to collapse
thanks , but i tried to flash CWM with unchecking auto reboot in Odin3 then pull battery BUT problem still present , I tried the other solution in the links BUT does not work for me
after odin flash reboot in stockrecovery and do a factory reset,reboot.
drali8888 said:
thanks , but i tried to flash CWM with unchecking auto reboot in Odin3 then pull battery BUT problem still present , I tried the other solution in the links BUT does not work for me
Click to expand...
Click to collapse
you need to go here and post or look for PIT file used with Stock ROM to flash your unit
The mini use tass .ops, not sure what is used for Mini 2 also read this thread
Check this out! You , YES! you are an " Android ". Not your phone but U.
-CALIBAN666- said:
after odin flash reboot in stockrecovery and do a factory reset,reboot.
Click to expand...
Click to collapse
I CANNOT get into recovery mode either stockrecovery or custom !
xsenman said:
you need to go here and post or look for PIT file used with Stock ROM to flash your unit
The mini use tass .ops, not sure what is used for Mini 2 also read this thread
Check this out! You , YES! you are an " Android ". Not your phone but U.
Click to expand...
Click to collapse
I tried to flash the pit file in this thread http://forum.xda-developers.com/showthread.php?t=2226321 using Odin3 , but phone still stucks at samsung logo beside that I cannot access recovery mode , I looked for a solution in the link here but no one posted the correct solution
drali8888 said:
I tried to flash the pit file in this thread http://forum.xda-developers.com/showthread.php?t=2226321 using Odin3 , but phone still stucks at samsung logo beside that I cannot access recovery mode , I looked for a solution in the link here but no one posted the correct solution
Click to expand...
Click to collapse
ok, try the reboot tool from PC, I have a collection of recovery tool in My Android Collections, try them, if this fails
The galaxy Mini is using .ops file and not PIT file, so some Google search might help you to understand which version of Odin3 is used for
Mini 2
EDIT: ok checked and 6500D is using PIT, you can download from here
for ROMs you can download from here, (Download fresh one and try) when using PIT, re-partition must be checked also remove SIM card and EXT SD card, when flashing, battery must be charged.
Check this out! You , YES! you are an " Android ". Not your phone but U.
xsenman said:
ok, try the reboot tool from PC, I have a collection of recovery tool in My Android Collections, try them, if this fails
The galaxy Mini is using .ops file and not PIT file, so some Google search might help you to understand which version of Odin3 is used for
Mini 2
EDIT: ok checked and 6500D is using PIT, you can download from here
for ROMs you can download from here, (Download fresh one and try) when using PIT, re-partition must be checked also remove SIM card and EXT SD card, when flashing, battery must be charged.
Check this out! You , YES! you are an " Android ". Not your phone but U.
Click to expand...
Click to collapse
Thanks man for your replies >> the problem was solved
I was butting my phone on usb cable it showed charging icon at this time i pressed the bottoms volume up + down + home + power it restarted in custom recovery mode , fortunately FINALLY i am in recovery mode :good::victory: then i did cache wipe and factory reset and my phone boot normally without problem
Everything that happened:
1) I rooted my GT-I9300 using ODIN v3.07 and CWM Recovery
2)I installed zip of Resurrection Remix Kitkat ROM for S3 using CWM
3) I hated it to the core!
4)I flashed the official stock ROM of 4.3 JB using ODIN
5) I realized that USB Debugging was off!
6) My phone gets stuck at the Samsung logo and doesn't even load into recovery mode!
7) It boots into download mode, I flash the 4.1.2 JB ROM for S3 using ODIN
8)The Samsung logo appears, disappears and then again appears! This goes on forever!!
9)This time it boots into Android Recovery and displays the error: E: failed to mount data (Invalid Argument) cant find /data
10) The phone restarts and continues the boot-looping!!
11) I try to restore it with Kies3 using Firmware Upgrade and Initialization
12) It upgrades the firmware to 4.3 JB but the things that happened in NO. 6 continue!
13) I realised its time for the xda people to help me out!!
Things I have:
1) My Bricked Samsung Galaxy S III (International) GT-I9300
2) USB Cable
3) A Windows 7 PC with 2GB RAM
4) An Internet Connection
Can someone please explain what has happened to my phone and what should I do to get it back on stock ROM?
Please help me as I dont want to buy a new phone!
Note: If you have 16 GB of I9300, apply this guide
I think you can restore your device via repartition with a PIT file. I uploaded Odin and PIT file that I use. You can download it from attachments
You should install this ROM via PIT file; http://samsung-updates.com/details/25147/Galaxy_S_3_International/GT-I9300/TUR/I9300XXUGNB6.html
Make sure select PIT file in Odin before installation.
I live in India. Can you suggest an INU or INS rom?
I flashed my phone with PIT file and (INS_I9300XWUGML4_I9300ODDGML4_I9300DDUGMK1) 4.3 JB ROM. No Progress!!
stance_john said:
I flashed my phone with PIT file and (INS_I9300XWUGML4_I9300ODDGML4_I9300DDUGMK1) 4.3 JB ROM. No Progress!!
Click to expand...
Click to collapse
Can you try install with my suggested ROM? If it will success, you can install your country's ROM anyway.
After installing it via PIT file, wait for boot. If it stuck in Samsung logo, remove battery,insert the battery again, boot into recovery and try to wipe data.
I'm saying again; Make sure select PIT file in Odin before installation.
Did you try a wipe data when you flashed second stock ROM?? When you got in recovery
Sent from my GT-I9300 using Tapatalk
f0xy said:
Did you try a wipe data when you flashed second stock ROM?? When you got in recovery
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Yes, I tried it. When i tried clear dalvik cache, it wasnt cleared. Instead I was took to the main menu of the CWM.
forumber2 said:
Can you try install with my suggested ROM? If it will success, you can install your country's ROM anyway.
After installing it via PIT file, wait for boot. If it stuck in Samsung logo, remove battery,insert the battery again, boot into recovery and try to wipe data.
I'm saying again; Make sure select PIT file in Odin before installation.
Click to expand...
Click to collapse
I installed the ROM with the PIT file but still no progress!
A new problem:
1) I went to the Samsung people expecting some help
2) And they did the most cruel thing on this earth!!! They said
"The binary counter says 4. That means you have flashed the ROM customly. This has void the warranty of your device. We cant help you if you have void your warranty. Sorry!"
I was trying to root my galaxy y but after I flashed cwm 6.0.5.3, when I tried to flash the root package, it failed so when I tried to reboot but it says I'm missing root permission and boots back into cwm. What do I do?!
Frostmunch said:
I was trying to root my galaxy y but after I flashed cwm 6.0.5.3, when I tried to flash the root package, it failed so when I tried to reboot but it says I'm missing root permission and boots back into cwm. What do I do?!
Click to expand...
Click to collapse
If you don't have a nandroid backup, then you will need to reflash the stock firmware via Odin and start over.
I didn't make a nandroid backup but it doesn't bother me much about losing data. I tried using Odin but I can't seem to understand how to use it.
Sent from my GT-S7500 using XDA Free mobile app
If u don't have a nandroid backup u can get it from the internet ...
Frostmunch said:
I didn't make a nandroid backup but it doesn't bother me much about losing data. I tried using Odin but I can't seem to understand how to use it.
Sent from my GT-S7500 using XDA Free mobile app
Click to expand...
Click to collapse
There are a zillion guides around here, YouTube, etc on how it works. It's basically the same for almost any Samsung.
Download the appropriate firmware for your phone / carrier / region
Install drivers, if needed
Open Odin as Admin
Plug phone in Download Mode to PC
Odin should register phone as COM:XX where XX could be any numbers
Load the firmware in the PDA or AP slot, depending on which Odin version being used
After file is checked, hit Start
Wait patiently
Phone should reboot on it's own
If phone bootloops after successful flash, then reboot to the stock recovery and perform a factory data reset
es0tericcha0s said:
There are a zillion guides around here, YouTube, etc on how it works. It's basically the same for almost any Samsung.
Download the appropriate firmware for your phone / carrier / region
Install drivers, if needed
Open Odin as Admin
Plug phone in Download Mode to PC
Odin should register phone as COM:XX where XX could be any numbers
Load the firmware in the PDA or AP slot, depending on which Odin version being used
After file is checked, hit Start
Wait patiently
Phone should reboot on it's own
If phone bootloops after successful flash, then reboot to the stock recovery and perform a factory data reset
Click to expand...
Click to collapse
Thanks! It finally worked! I couldn't find the md5 files until i realised i had to unzip. :victory::victory:
Good job...
es0tericcha0s said:
There are a zillion guides around here, YouTube, etc on how it works. It's basically the same for almost any Samsung.
Download the appropriate firmware for your phone / carrier / region
Install drivers, if needed
Open Odin as Admin
Plug phone in Download Mode to PC
Odin should register phone as COM:XX where XX could be any numbers
Load the firmware in the PDA or AP slot, depending on which Odin version being used
After file is checked, hit Start
Wait patiently
Phone should reboot on it's own
If phone bootloops after successful flash, then reboot to the stock recovery and perform a factory data reset
Click to expand...
Click to collapse
Bro can u help me also............i was using CWM 5.x.x.x and then i flashed CWM 6.x.x.x....i flashed the Kitkat ROM but when i tried to reboot it, it went back to the CWM 6.x.x.x recovery mode
Then i tried to reflash using a the stock ROM, and also installed the GAPPS, but when i tried to reboot , it says it says "No Root Access, Root Device"
No matter what i select 'yes' or 'no' it says -->
It comes back to the CWM 6.x.x.x recovery mode
When i tried to reroot it using the "Update.zip"..........It says -->
E:Error in storage sdcard0 update.zip
(status 0)
Installation aborted
And No matter what i do it does not go out of the CWM 6.x.x.x Recovery Boot
I cleared the "Data", "Cache", "Dalvik Cache".................nothing worked
PLZ HELP:crying::crying::crying:
I am using a gt i8552 Samsung galaxy grand Quattro , rooted with kingo root.
somewhere in an article I read supersu is better
so I tried installing supersu me pro
. But It showed I was not rooted with king/kingo root. so
I flashed supersu.zip from cwm the recovery I used.
anyway after some time it showed a message update binary
there were 2 options 1) normal.........2)cwm/twrp
obviously I chose normal .
it said installation failed
. I chose cwm recovery fro that moment on whenever I chose reboot system now it would reboot to cwm.
then after trying some options like shutdown(wouldn't work even if I waited 2hours )
reboot to bootloader(the only place else I could go other than cwm)
I started surfing the internet . I got confused in a bootloop and recovery loop . I also tried flashing fixpermissions.zip
I tried factory resed wiped cache partition dalvik chache formatted /cache istalled a custom rom(cosmic rom for gti8552)
. thinking that it is a bootloop :silly: . then I understood and I flashed stock recovery( http://d-h.st/hcA ) <<<<<<biggest mistake of me all
now I am in a boot loop I cannot access bootloader nor recovery . all I can see is samsung
update > when Samsung appered I pulled out the battery put it again I saw galaxy grand quatrro :happy: I got into stock recovery somehow and rebooted but the it didn't even show Samsung
update> I am able to access stock recovery anything I can do
Thanks to pbhogal98
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
that problem was solved but........ Now I am in one more problem..........
I want to install custom ROM (cosmic rom)
But I cannot as of I cannot enter the recovery I have flashed twrp. Anything new was the triangle with ! Below Samsung but I could not enter recovery
...........
So I also tried cwm , I could not enter that also..
So I need another way to install custom ROM or way to fix that recovery
I would really love some advice plz
go to sammobile (google it)
download firmware and odin
go to download mode and flash firmware by odin
thx but.....
tejus said:
go to sammobile (google it)
download firmware and odin
go to download mode and flash firmware by odin
Click to expand...
Click to collapse
see the problem is as told in description I factory reset resulting in the usb debugging is not checked so I can not use odin as it does not add the device.
I can now access stock recovery . any help
can I use adb to istall the firmware.if so then how
No need
Just go to download mode and flash firmware using odin. There is no system to debug in download mode , so you don't need to enable debugging .
Using AP ? When I so connect it Odin does not show added any idea why then??
pbhogal98 said:
Just go to download mode and flash firmware using odin. There is no system to debug in download mode , so you don't need to enable debugging .
Click to expand...
Click to collapse
:good: https://www.kingoapp.com/root-tutorials/how-to-flash-samsung-stock-rom-via-odin.htm
Thanks turns out I did not open Odin with admin
:good::victory:thank you I shall try now
Just a small problem when I download GT-I8552 firmware it just fails
http://www.sammobile.com/firmwares/confirm/45107/I8552XXANJ1_I8552ODDANG1_INU/
pshyco<me;68809915 said:
Just a small problem when I download GT-I8552 firmware it just fails
http://www.sammobile.com/firmwares/confirm/45107/I8552XXANJ1_I8552ODDANG1_INU/
Click to expand...
Click to collapse
Firmware downloaded but. Complete (write) operation failed
All threads completed (succeed 0/failed 1)
I just changed USB port and I'm done:good::laugh::laugh::good::highfive:
pbhogal98 said:
Just go to download mode and flash firmware using odin. There is no system to debug in download mode , so you don't need to enable debugging .
Click to expand...
Click to collapse
Thank you very much buddy:highfive:
Try to select file in Odin if not able to select then there may be error in downloaded file.
Try downloading through IDM
Everything done turns out I was not using usb port 3
.0 now every single thing is back to normal
pshyco<me said:
Firmware downloaded but. Complete (write) operation failed
All threads completed (succeed 0/failed 1)
Click to expand...
Click to collapse
Use flashify
Y_A_S_H said:
Use flashify
Click to expand...
Click to collapse
Firmware was successful installed buddy I have a new problem see above
You should try usb jig if its works it might take you to download mode. And if you got stuck in cwm recovery loop just flash cwm again and make sure that you select auto reboot.