My phone just dead. It stucks on Samsung Logo. I made some researches, tried to flash orginal Rom but it did not work. Odin fails.
I ve tried to update from ADB, but it says Installation Aborted!.
I tried to install TWRP or other recovery images but couldnt via Odin. I used almost all different Odin versions or cables or computers.
As I read, this can be a hardware problem, like my motherbaord is dead. Bu I want to be sure about this. Cause if it is dead, I am gonna buy new one and try to install it.
I tried almost 5 different Roms but couldnt flash none of them. Always Odin fails. In download mode it says Knox Warranty Void: 1 and RP SWREV: A2. I dont know if Odin fails because of this.
If anyone can help that would be awesome. I ve tried to add pictures but it doesnt accept outside links.
At Recovery mode it says E: Failed to mount /efs , cache, recovery, last recovery (no such file or directory)
Sorry for bad english. Thanks.
You are having BOOT-LOOP (i.e soft brick) not to worry. Find USB drivers for your device and STOCK ROM.
Just Check this out, Click below
SALMAN AL-BADGAIL
Salman Al-Badgail said:
You are having BOOT-LOOP (i.e soft brick) not to worry. Find USB drivers for your device and STOCK ROM.
Just Check this out, Click below
SALMAN AL-BADGAIL
Click to expand...
Click to collapse
I ve tried them all. Installed Samsung drivers and orjinal ROM from Sammobile, but Odin gives eroor. Nand Write Start!!
Sammobile does not show BL AP CSC etc files.
Please tell me your ex android ver. So that i can find it for you
Check HERE
Check Guide ETC HERE
Salman Al-Badgail said:
Sammobile does not show BL AP CSC etc files.
Please tell me your ex android ver. So that i can find it for you
Check HERE
Check Guide ETC HERE
Click to expand...
Click to collapse
It was latest original ROM Android 4.4.2 for Turkey
cihadkoc said:
It was latest original ROM Android 4.4.2 for Turkey
Click to expand...
Click to collapse
Try posting it here
http://forum.xda-developers.com/showthread.php?t=2259645
Related
Hi all
I have recived a I9100 from a friend and I am trying to fix it for her... It went dead after she flashed a costum rom to her device...
Recovery does not work either
What I have tried
flashing a stock rom
flashing a kernel
flashing bootloader
flashing unbrick file using ASB box
flashing the handset with SPT box
flashing .pit
repartion
---------------------------------
SPT box flashing log
Detect Phone Connect ...
Connect Phone OK.
Get PIT for Mapping ...
Sending Boot Data ...
Sending Sbl Data ...
Sending Param Data ...
Sending zImage Data ...
Sending Factoryfs Data ...
Sending Data Data ...
Sending Cache Data ...
Sending Hidden Data ...
Please Wait Reboot Phone ...
Update Flash OK!
Total Time: 146.4 s
My guess is that it is NAND rw problem, and I will have to wait for my riff box service cables to arrive, so I can jtag it back to life (I have the box, they forgot to ship the service cables)
Any ideas is appriciated
Best regards
You actually see the logo? Can you get into Download mode? Not recovery.
If not you either need to Jtag or she has somehow triggered the super brick bug. Then the device can't even be repaired with the RIFF box.
TheSniperFan said:
You actually see the logo? Can you get into Download mode? Not recovery.
If not you either need to Jtag or she has somehow triggered the super brick bug. Then the device can't even be repaired with the RIFF box.
Click to expand...
Click to collapse
Yup, it is stuck at the Samsung GSII logo...
I can easily get into Download mode... But I have no recovery... Im thinking that it is a eMMC fault, I am trying to find a place to buy the eMMC and get it replaced/reballed
Well if you can get into Download mode, I'd suggest you try flashing the CM9 resurrection edition. It's the only "custom Rom installation package" I know that comes with everything to start from every base.
If it's really a broken emmc chip, you better have the knowledge to replace it yourself (or know someone who has). It's neither an easy nor cheap procedure.
TheSniperFan said:
Well if you can get into Download mode, I'd suggest you try flashing the CM9 resurrection edition. It's the only "custom Rom installation package" I know that comes with everything to start from every base.
If it's really a broken emmc chip, you better have the knowledge to replace it yourself (or know someone who has). It's neither an easy nor cheap procedure.
Click to expand...
Click to collapse
My brother has the right equipment at work...
I will try to flash that to it... Could you post a link??
Btw how am I supposed to flash it, as I have no recovery mode??
CM9 Resurrection is flashed via Odin in download mode.
MistahBungle said:
CM9 Resurrection is flashed via Odin in download mode.
Click to expand...
Click to collapse
Hmm can you post a link then?? I get a .zip that is CWM flashable
Ratata82 said:
Hmm can you post a link then?? I get a .zip that is CWM flashable
Click to expand...
Click to collapse
Im at a loss here... Why do you keep on going on about recovery mode," Hmm can you post a link then?? I get a .zip that is CWM flashable ", when you say you have none but can easily get into download mode!!!!.
As Mistahbungle said," CM9 Resurrection is flashed via Odin in download mode ".
Read the Galaxy S2 guide here how to use Odin is also there.
How to fix a soft brick is here
And CM9 Resurrection is here flashable via Odin
Hope you know what your doing.
bored_stupid said:
Im at a loss here... Why do you keep on going on about recovery mode," Hmm can you post a link then?? I get a .zip that is CWM flashable ", when you say you have none but can easily get into download mode!!!!.
As Mistahbungle said," CM9 Resurrection is flashed via Odin in download mode ".
Read the Galaxy S2 guide here how to use Odin is also there.
How to fix a soft brick is here
And CM9 Resurrection is here flashable via Odin
Hope you know what your doing.
Click to expand...
Click to collapse
I apparently only found the CWM files, instead of the tar, that's why I was talking about CWM... but it is still dead...
Okay, you must have misunderstood me... I know how to use Odin, I know how to recover from a Soft brick, I know how to recover from hardbricks using JTAG... I am not a noob
I have all Samsung professional tools, riff, SPT, medusa, asb etc...
Ratata82 said:
I apparently only found the CWM files, instead of the tar, that's why I was talking about CWM... but it is still dead...
Okay, you must have misunderstood me... I know how to use Odin, I know how to recover from a Soft brick, I know how to recover from hardbricks using JTAG... I am not a noob
I have all Samsung professional tools, riff, SPT, medusa, asb etc...
Click to expand...
Click to collapse
Then accept my appologies. the link to the CM9 odin flashable is live and it is a .tar file.
Good luck
bored_stupid said:
Then accept my appologies. the link to the CM9 odin flashable is live and it is a .tar file.
Good luck
Click to expand...
Click to collapse
Hehe, it is just okay...
When I flashed the CM9 to it, I got the kernel panic uploade mode... So my guess is still NAND/eMMC fault...
Strange one. It seems like a hardware fault. Good luck with repairing that. Usually a motherboard replacement would be the way to go.
Can you check if you're able to get into stock recovery after flashing a stock ROM?
I have had similar problems on both SGS2 and on Gtab 8.9 after performing factory reset in latest CWM. The only solution was flashing a stock ROM and then factory reset from stock recovery (and then flashing whatever ROM I wanted to flash in the first place)
Could be worth trying.
podumal said:
Can you check if you're able to get into stock recovery after flashing a stock ROM?
I have had similar problems on both SGS2 and on Gtab 8.9 after performing factory reset in latest CWM. The only solution was flashing a stock ROM and then factory reset from stock recovery (and then flashing whatever ROM I wanted to flash in the first place)
Could be worth trying.
Click to expand...
Click to collapse
It was a HW failure... I got it fixed under warranty, and they changed the PCB... Way more simple than changing the eMMC...
Best regards
bored_stupid said:
As Mistahbungle said," CM9 Resurrection is flashed via Odin in download mode ".
And CM9 Resurrection is here flashable via Odin
Hope you know what your doing.
Click to expand...
Click to collapse
Had the same problem, stuck in logo. I tried flashing stock ROM, but it didn't save my situation. So I tried flashing CM9 Resurrection and managed to get into recovery mode. Then I reflashed the custom ROM I had earlier on and everything went up again. Thanks a lot.
same issue
I am also stuck at Samsung logo, i9100
I can get into recovery. I installed stock many times - no help. (I9100XWMS1_I9100XXMS4_I9100NEELS1_HOME.tar.md5)
I was missing my IMEI so I guess it is the efs folder fault.
I tried to fix the efs with backups, I have zipped EFS, but I can not go to system and replace the files.
If you have any ideas - please share it with me!
I also had a nandroid backup - no help as well.
my sgs2 is softbricked and I have download AND recovery mode, and still can't fix it ;(
did you try this guide?
forum.xda-developers.com/galaxy-s2/help/guide-26-12-flash-stock-firmware-rom-t2365701
While trying to update his device my friend bricked somehow his galaxy player YP-GB70EB 16Gb, i still can go in download mode and device is detected by odin, tried several solutions with no change, flashing is successful but device won't boot and remains stuck in Samsung logo, would anybody guide me to a tutorial or at least provide the right files to help me unbrick my device ?? thx in advance
theexperto said:
While trying to update his device my friend bricked somehow his galaxy player YP-GB70EB 16Gb, i still can go in download mode and device is detected by odin, tried several solutions with no change, flashing is successful but device won't boot and remains stuck in Samsung logo, would anybody guide me to a tutorial or at least provide the right files to help me unbrick my device ?? thx in advance
Click to expand...
Click to collapse
Try flash kernel and then in recovery full wipe and then flash rom...
Or flash pit file and then rom
thx dude for fast reply, but would you please point me to the files because i don't seem to see where i can find working ones ...
theexperto said:
thx dude for fast reply, but would you please point me to the files because i don't seem to see where i can find working ones ...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1389873
Download PIT file and in odin choose PIT and flash it
just tried that with no success, looks like my partions are gone 'caue even when i try wiping data i get errors and formatting fails and stuf
i have an unrooted unlocked samsung galaxy mega 6.3 gt i9200 from china i tried to flash an arabic rom using odin but it didnt work and now the phone is not working how can i fix it
dexzizo said:
i have an unrooted unlocked samsung galaxy mega 6.3 gt i9200 from china i tried to flash an arabic rom using odin but it didnt work and now the phone is not working how can i fix it
Click to expand...
Click to collapse
What isn't working? Did it flash successfully but not boot? Just do a factory reset. If it didn't flash completely, then you have to let us know what happened before it failed.
es0tericcha0s said:
What isn't working? Did it flash successfully but not boot? Just do a factory reset. If it didn't flash completely, then you have to let us know what happened before it failed.
Click to expand...
Click to collapse
i tried to flash a rom but failed now it says Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again
dexzizo said:
i tried to flash a rom but failed now it says Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again
Click to expand...
Click to collapse
Ok, so typically when people say they flashed a rom, that means a custom version through a custom recovery. But you said earlier you tried to install through Odin. This is an important distinction. If you tried to flash a custom rom and it didn't work, then flashing the correct stock firmware through Odin will resolve. If you flashed through Odin and it gave you that warning, then you need to find the right one and re-try.
es0tericcha0s said:
Ok, so typically when people say they flashed a rom, that means a custom version through a custom recovery. But you said earlier you tried to install through Odin. This is an important distinction. If you tried to flash a custom rom and it didn't work, then flashing the correct stock firmware through Odin will resolve. If you flashed through Odin and it gave you that warning, then you need to find the right one and re-try.
Click to expand...
Click to collapse
Yup what i tried to do is flash an arabic rom instead the Chinese stock one but if failed on the phone it said invalid at the end so if i flashed the Chinese stock one back from odin will it work or not
Yes, flashing the original firmware via Odin should get you working again.
es0tericcha0s said:
Yes, flashing the original firmware via Odin should get you working again.
Click to expand...
Click to collapse
will it work if i used samsung kies recovery
Possibly, but if the system had already been modified, I find Odin to be a more reliable fix.
es0tericcha0s said:
Possibly, but if the system had already been modified, I find Odin to be a more reliable fix.
Click to expand...
Click to collapse
well i flashed back the old rom and it worked but now i have no signal and there is no sound what can i go and there is 2 red lines on the top when i open the phone even the wifi doesnt work
Hi there,
I may have softbricked my i9300 S3 after failing to flash MIUI. I had the phone rooted already with custom recovery installed.
CWM 6.0.1.2. A friend recommended the recovery after he successfully installed it on his S3. I was running Android 4.1.2
so no Knox problems hopefully. I downloaded the latest MIUI rom for my phone directly from the official website and used the CWM
to try and flash it. My phone was already rooted at that stage and I had wiped cache and reset the phone prior to the flash attempt.
Unfortunately it gave me a Status 7 error. Even after I unrooted and rerooted my phone the error still remained. I read somewhere else
that this happens sometimes and so I edited the Updater-Script as suggested elsewhere and deleted the section pertaining to the
Verification process. I double checked I had the right ROM too and proceeded to wipe and flash again. It seemed to take and the phone
restarted and I was met with the MIUI language selection menu. However, when i tried to select English, the whole thing just froze and switched
off and restarted itself. But this time the screen went all weird and fuzzy and wouldnt boot back to MIUI interface. I tried to boot into recovery but with no luck. I have tried to reflash the recovery also with no luck. I have tried other versions of CWM alos without luck. Tried TWRP and also no luck. I have used both the 3.07 and the 1.85 version of ODIN with no luck. The flash would fail with either a PIT error or a COM port error. But I have all the necessary drivers installed. I have Kies but dont run it at the same time. The Emergency Firmware something also doesnt seem to work.
I have pictures of the various errors and such and can provide dropbox links if required
Any suggestions would be helpful.
Thanks!
Original Firmware
If I were you, I would go to Download Mode and Flash the Original Firmware from Samsung. Download it from the Sammobile Website and after you successfully installed it try it again.
Like Tkkg1994 said above download the Samsung firmware and use Odin to install it through download mode.
You were having a "Status 7" error when initially flashing miui because your CWM recovery was not the latest...download the latest cwm recovery (6.48.something not sure??) Then flash miui and hopefully you shouldn't have any problems.
Sent from a "Galaxy" far, far away with my Ultra Ray Gun
begin from bottom
Pulseuser said:
Like Tkkg1994 said above download the Samsung firmware and use Odin to install it through download mode.
You were having a "Status 7" error when initially flashing miui because your CWM recovery was not the latest...download the latest cwm recovery (6.48.something not sure??) Then flash miui and hopefully you shouldn't have any problems.
Sent from a "Galaxy" far, far away with my Ultra Ray Gun
Click to expand...
Click to collapse
Yes that's correct. Because of this I would do all things to get a normal S3 without root. That in download mode it shows Original and 0 flashs. Than I would download Philz latest Touch Recovery, clean to install a new rom, download the ROM again, maybe there is a fault, than install it again and root it later, not than.
Hope I could help
Thanks guys! I think that was the general consensus then. I'm trying to follow this guide here
http://unbrick.itcse.com/unbrick-soft-bricked-samsung-galaxy-s3-i9300/
But when I download the Original 4.1.2 ROMS they dont have all the mentioned csc files nor do they have any PIT files in them either.
The only file included in the ZIP was a MD5 file which i guess is the PDA file.
Regardless, I'll give it a go. I've found some newer CWM recoveries but they seem to be IMG files instead of ZIP or MD5.
Any idea how to convert it. I'm getting the file directly from the CWM ROM MANAGER website.
Thanks for all the help again!
Firmware
If you like to download the latest Firmware form Samsung, than I have a link for you:
HTML:
http://www.sammobile.com/firmwares/3/?download=33625
Creat a free account on sammobile, than download it. Flash it on Odin select AP (On Odin3) or PDA on Odin 1.85.
Hit thanks if I helped you
Thanks man but I live in Taiwan so selected Taiwan.
I downloaded this one
http://www.sammobile.com/firmwares/3/?download=19112
and also another one but both did not have the PIT file.
When I try to use ODIN 3.09 it says fail due to THERE IS NO PIT PARTITION.
There is only one file thats supposed to be for PDA i guess.
I have tried older ODIN 1.85 too. NO PIT PARTITION ERROR
Help?
james0908 said:
Thanks man but I live in Taiwan so selected Taiwan.
I downloaded this one
http://www.sammobile.com/firmwares/3/?download=19112
and also another one but both did not have the PIT file.
When I try to use ODIN 3.09 it says fail due to THERE IS NO PIT PARTITION.
There is only one file thats supposed to be for PDA i guess.
Help?
Click to expand...
Click to collapse
Extract the file inside the ZIP File. Than go to odin and on Odin3.09 select AP! Not PIT. This works!
Yes Sir Thanks but I was doing that before. When I unzip there is 2 files.
One is MD5 file and the other one is SS_DL.dll file
I loaded it in AP slot in ODIN 3.09 and ODIN 1.85
Still gives PIT Partition Error!
Is there any PIT file that I can use that wont brick my phone??
I really dont want to brick this phone!
james0908 said:
Yes Sir Thanks but I was doing that before. When I unzip there is 2 files.
One is MD5 file and the other one is SS_DL.dll file
I loaded it in AP slot in ODIN 3.09 and ODIN 1.85
Still gives PIT Partition Error!
Is there any PIT file that I can use that wont brick my phone??
I really dont want to brick this phone!
Click to expand...
Click to collapse
You don't brike your phone this way. I never select the SS_DL.dll file. You just need the MD5 file and do this in AP. I do some research on that but it should work
Yes thanks man. Even Samsung Official readme says that I should do it that way but I still get PIT error when I load the .tar file in the zip.
If someone can link me a working .tar file with PIT as well I would greatly appreciate it!
Thank you all!
Thinking about it....
james0908 said:
Yes thanks man. Even Samsung Official readme says that I should do it that way but I still get PIT error when I load the .tar file in the zip.
If someone can link me a working .tar file with PIT as well I would greatly appreciate it!
Thank you all!
Click to expand...
Click to collapse
Maybe flash a Philz Touch recovery first. Here is a link:
HTML:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/philz_touch_6.48.4-i9300.zip.md5/
After that try again with the md5 from Sammobile
Thanks man. That one failed too. Some kind of binary error. I tried numerous other versions from the site
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/
Only the .tar ones load but when I start to flash it, the same PIT Partition error comes up.
I appreciate any and all help!
james0908 said:
Thanks man. That one failed too. Some kind of binary error. I tried numerous other versions from the site
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/
Only the .tar ones load but when I start to flash it, the same PIT Partition error comes up.
I appreciate any and all help!
Click to expand...
Click to collapse
God damm it. -.- sorry bro I can just give you a last advice. Download the S3 Android 4.1.2 from Sammobile and try this the same way.
Tkkg1994 said:
God damm it. -.- sorry bro I can just give you a last advice. Download the S3 Android 4.1.2 from Sammobile and try this the same way.
Click to expand...
Click to collapse
Those are the ones I have been downloading from Sammobile. I havent downloaded any of the 4.3 versions. I have tried many 4.1.2 versions
Unfortunately none of them have the PIT file included.
Thanks!
Any other suggestions??
james0908 said:
Those are the ones I have been downloading from Sammobile. I havent downloaded any of the 4.3 versions. I have tried many 4.1.2 versions
Unfortunately none of them have the PIT file included.
Thanks!
Any other suggestions??
Click to expand...
Click to collapse
Ah than try it with a 4.3 version!
Maybe this thread could help.
There is a download for a PIT file for GT-i9300 16GB version.
Tkkg1994 said:
Ah than try it with a 4.3 version!
Click to expand...
Click to collapse
Thanks I did but it did not come with a PIT file and flashing it did not work.
UPDATE
Turns out that my S3 had a faulty eMMC chip and had to have the chip and the motherboard replaced.
NOTE TO OWNERS OF 2012 MODEL I9300 GALAXY S3:
I did not know this before I had the problem but there is apparently an APP on the PLAY STORE called eMMC Brickbug App.
That will apparently check your eMMC status. Since I was not aware of this app beforehand I cannot say for sure if this app
does or does not work. However I previously owned and since gave away a 2013 late model Galaxy S3 which had no issues
whatsoever. From all the details that I have read, it seems that most 2012 models of the i9300 are more susceptible to this kind
of problem. If you own a 2012 model please take extra care when flashing any type of software, even if its original from Samsung!
Finally thanks to all the Posters who have attempted to help me out. I'm sure that all of your suggestions would have fixed the issue had my
phone not been hard bricked in the first place.
Hi , please help me ,
I have a samsung galaxy s3 , it was working so good , until yesterday , when i wake up , i found it crushed on the "samsung galaxy s||| "logo , i try to flash it , but i always get failed on odin .
I have access to recovery mode but it write : E: failed to mount /cache
I have access to download mode too without any probleme
*i''ve tried many version of odin : 1.83 - 1.85 - 3.04 - 3.06 - 3.07 - 3.09 - 3.12 .
*i've tried pit file (but im not sure if it's compatible with my phone ) anyway i get failed error too .
*i've tried changing the cable .
*i've tried changin usb port .
*i've changed the pc (first one is with windows 10 - and the second is with windows 7)
Please help me :'(
Thanks in advance
What error message are you getting in the Odin log?
Sounds like it is a hardware problem.
with frimware I9300XXUGMK6_I9300OXXGML1_I9300XXUGMK6 ; i got error on boot.img in all odin version
and in frimware I9300XXDLIH_I9300VDSDLI1_VDS ; i got error on system.img in all odin version
Looks like the rom is too old for the phone. Try flashing the latest stock ROM from sammobile.com.
audit13 said:
Looks like the rom is too old for the phone. Try flashing the latest stock ROM from sammobile.com.
Click to expand...
Click to collapse
Depends where it's from. For my btu, mk6 was the last update. Nothing changed after mk6 so you should be able to 'downgrade' from any higher version as they are all 4.3.
E: failed to mount is a recovery issue. Which recovery are you using?. Is your device rooted?.
If your device isn't rooted then you can try flashing the stock recovery image via odin on the pc (hopefully it'll flash provided that the corruption is elsewhere in the nand).
If the stock recovery image won't flash then you have bigger issues and the device is probably hard bricked from hardware failure.
Here is a stock recovery for mk6: https://drive.google.com/file/d/0B4vTiHTBB629ajRJaWx5QlVFSWs/view?usp=drivesdk
Grab it quick before a mod breaks my balls for it.
Beamed in by telepathy.
Although mk6 may be the latest for some phones, it may not be the latest for the op's phone which is why I suggested flashing the latest stock rom.
Sorry for late answer , no my phone is not rooted , how i can see which recovery im using?
audit13 said:
Although mk6 may be the latest for some phones, it may not be the latest for the op's phone which is why I suggested flashing the latest stock rom.
Click to expand...
Click to collapse
Thats why I said "depends where it's from". You're right but lack the detail..
OP: You can access recovery by holding home and vol+ while tapping the power button.
Beamed in by telepathy.