I found this Port in Moto G 2015 Page, this thread:
http://forum.xda-developers.com/2015-moto-g/themes-apps/moto-g4-camera-timeweather-widget-t3382126
Tested here in CM13: all ok, except Manual Focus (FC camera).
Guide:
Flash zip in TWRP.
Add the following line to your build.prop in order to enable professional mode: (thanks @iiWoodstocK)
Code:
ro.product.device=athene
Camera (to flash): click here
joaonds said:
I found this Port in Moto G 2015 Page, this thread:
http://forum.xda-developers.com/2015-moto-g/themes-apps/moto-g4-camera-timeweather-widget-t3382126
Tested here in CM13: all ok, except Manual Focus (FC camera).
Guide:
Flash zip in TWRP.
Add the following line to your build.prop in order to enable professional mode: (thanks @iiWoodstocK)
Code:
ro.product.device=athene
Camera (to flash): click here
Click to expand...
Click to collapse
I tried this earlier a month ago and the professional mode was not working, i didn't had any pro mode option but today i tried this again after seeing this thread same again there is no professional mode option, i'm on RR rom 5.7.3 but can you confirm whether professional mode is really working for you ??
Yes, work in CM13. But not 100% (focus not work).
I think, "Cameringo" or "Snap Camera HDR" are the best camera app for Moto X2.
In cm14.1 vídeo crash
Related
Hello Guys...!
I am on Latest build of "RR Oreo" and i have tried Arnova8G2 "GCam_Pixel3Mod_1_build.6.1.013.apk" which working good in this rom NIGHT MODE, Portrait Mode, HDR+ is working fine so if gou guy's wanna use Pixel 3 Camera use that app...
https://www.celsoazevedo.com/files/android/google-camera/dev-arnova8G2/
"""Video Mode Is Not Working"""
camera api2 and gcam enabler required?
let me know if the above two mods are required
debmaj2 said:
let me know if the above two mods are required
Click to expand...
Click to collapse
Yes you have to Enable Camera2API
Do you need to change any settings before it works fine?. I am on July Security Build and the app crashes whenever I take pictures in portrait and normal mode but works fine in night mode.
I don't want to update to September security patch because i don't need my device to be encrypted so I can successfully run some magisk modules
Yo everybody, there are some good Google Camera ports i've like to share with yours.
Google Camera 5.X
Scrubber's Google Camera Port
Download link
Update date: 2018-01-09
What's not working/not included:
Enhanced HDR+ is not included in this Gcam;
cstark27's Google Camera Port
Download link
Update date: 2018-09-20
What's not working/not included:
-
Google Camera 6.X
Arnova8G2's Google Camera Port
Download link
Update date: 2018-12-09
What's not working/not included:
Night Mode not working.
B-S-G's x Tolyan009 Google Camera Port
Download link
Update date: 2018-12-04
What's not working/not included:
Slow Motion
Unstable or slow viewfinder
Motion Photos -- not tested
B-S-G's MGC_6.1.013_MI8_POCO_FINAL_V1a.apk
Download link
Update date: 2018-11-13
What's not working/not included:
Motion Photos
If you find some Google Camera which is fully working, reply this thread and I'll include it on this post
reserved
CypherPotato said:
reserved
Click to expand...
Click to collapse
Recommend including whether or not the wide angle lens works in both versions.
sleze said:
Recommend including whether or not the wide angle lens works in both versions.
Click to expand...
Click to collapse
My phone inst unlocked for testing
Sent from my Moto X4 using XDA Labs
CypherPotato said:
Yo everybody, there are some good Google Camera ports i've like to share with yours.
Google Camera 5.X
Scrubber's Google Camera Port
Download link
Update date: 2018-01-09
What's not working/not included:
Enhanced HDR+ is not included in this Gcam;
cstark27's Google Camera Port
Download link
Update date: 2018-09-20
What's not working/not included:
-
Google Camera 6.X
Arnova8G2's Google Camera Port
Download link
Update date: 2018-12-09
What's not working/not included:
Night Mode not working.
B-S-G's x Tolyan009 Google Camera Port
Download link
Update date: 2018-12-04
What's not working/not included:
Slow Motion
Unstable or slow viewfinder
Motion Photos -- not tested
B-S-G's MGC_6.1.013_MI8_POCO_FINAL_V1a.apk
Download link
Update date: 2018-11-13
What's not working/not included:
Motion Photos
If you find some Google Camera which is fully working, reply this thread and I'll include it on this post
Click to expand...
Click to collapse
Which one works for oreo8.0 with October security patch
Dev please make gcam work with both the lenses without root as u guys done with Asus Zenfone 6z. Please please please
Pawn99 said:
Dev please make gcam work with both the lenses without root as u guys done with Asus Zenfone 6z. Please please please
Click to expand...
Click to collapse
I know that the root isn't necessarily... But you must have bootloader unlocked and modify some lines in the build prop... Someone, with alternative rom, say that he can use both lens without modify build prop... So... There is some method to use both lens on a full stock Moto x 4? I mean without unlock bootloader or do anything.. A sort of pug and play apk
I modify for add this apk :
https://f.celsoazevedo.com/file/cfiles/gcm1/Gcam_6.2.030_Advanced_V2.2beta3.190624.0200.apk
Posted in another thread by uccollab... Actually I used this one and everything work fine for me... Ah there are some things to change like :
- on "About" check "advanced options"
- on HDR+ Options:
1) Disabled AWBGains Mod -> ON
2) RAW Format -> RAW10
3) Image Format -> YUV_420_888
4) GCAM wb Mode -> ON
Also, I suggest you to check the "Saturation adjustements" section, because this version really oversaturates photos. Try what levels are the best for you, in my case they were 1.0 - 1.0 for back camera and 1.1 - 1.3 for front camera.
( copied and pasted from the same thread so thanks uccollabs and thanks to Arnova that is the developer)
---------- Post added at 10:29 AM ---------- Previous post was at 09:54 AM ----------
Sidlegend said:
Which one works for oreo8.0 with October security patch
Click to expand...
Click to collapse
When I was on oreo I used cstark27 version 5.1 ( posted in the first post) ...
Stable and fast....
Actually I am on pie but that version still work.. So I continue to use it alternatively to 6.2
I'm on Havoc OS and BSG V2e, based on Gcam 6.1, works perfectly for me with buffer fix and AUX camera switch.
https://f.celsoazevedo.com/file/gcamera/MGC_6.1.021_MI8_V2e.apk
Where can we find the 7.x version?
LeyendaV said:
Where can we find the 7.x version?
Click to expand...
Click to collapse
The most stable and newest version that I found so far that works for Android 10 is Urnyx's 7.2.010 v2.3.
It does NOT support slow motion.
https://www.celsoazevedo.com/files/android/google-camera/dev-urnyx05/
LeyendaV said:
Where can we find the 7.x version?
Click to expand...
Click to collapse
Hello, here is a 7.3 that you can try
https://www.xda-developers.com/goog...ary-camera-support-many-devices-without-root/
In particular with this app you can activate the secondary camera in that way : setting >> general advanced >> foto active the secondary camera ...
Attention if you active also the 3a camera the app will crash and you will not able to use the camera . . Tomorrow I will test it with the sunlight , because I' am using it without xml setting ... But the most important thing is that it works!
Ps: I am on stock pie, with bootloader locked a without root .
Ps2: I have finded that version thanks to @sleze that posted it some post under this .
Hi, i am currently using pixels experience custom rom on my device but the current pre installed gcam doesn't had night scene, and sometimes its lagging.. Does anyone have a stable version for gcam selfie and night scene.
Thanks
Just get the last file, which works best for android 9.x pie variants. I'm running it on Syberia OS, and the only issues I have is selfie in portrait mode doesn't work.
https://miui.blog/redmi-5-plus/compatible-gcam-mods/
After a lot of testing following is working for me (using HavocOS without Gapps):
- flash attached camera_2api.zip (it's from the note 5 plus forum, but works for me)
- flash the attached camera (it's a Magisk module, so Magisk must be flashed too)
As always: making a backup is recommended. Hope I could help.
Greetings from Germany
Gaukler_Faun said:
After a lot of testing following is working for me (using HavocOS without Gapps):
- flash attached camera_2api.zip (it's from the note 5 plus forum, but works for me)
- flash the attached camera (it's a Magisk module, so Magisk must be flashed too)
As always: making a backup is recommended. Hope I could help.
Greetings from Germany
Click to expand...
Click to collapse
is this the miui camera or gcam? and also what version?
Liron123 said:
is this the miui camera or gcam? and also what version?
Click to expand...
Click to collapse
I think it's Mui Camera. But the package name is "com.android.camera". Version code is 2.0. I attached a screenshot.
I recommend using GCamera_Mod_v.5.1.23_R5Plus_fix_crash for Front Camera on any rom!
And I also recommend bsg-test-8.1 then disabling the location, shutter sound and enabling
the HDR+ Enhanced to prevent crashing then installing MGC_6.1.021_BSG_Arnova-based_v.1.3d_TlnNeun
and configuring it properly If you did that without crashes (Which I have done many times!) then update
to MGC_6.1.021_BSG_Arnova-based_v.1.4a_TlnNeun and done now you have to configure It yourself properly
else It'll be pretty crappy!
If you're dumb and cant understand this then simply flash the MIUI Camera above my post
I recommend xtreme v2s config, and 7hdr frames for day 36 for night and fully working night sight
with good auto-focus in low-light and sharpness etc.
Hi all,
as the GSI topic here is still having a few issues, i have created a gsi overlay as per phhussons instructions:
https://github.com/phhusson/treble_experimentations/wiki/How-to-create-an-overlay
The source code can be found here:
https://github.com/mKenfenheuer/vendor_hardware_overlay
Build/install instructions:
(Assuming you have a recent Ubuntu/Debian/Mint Linux machine running)
1. Install xmlstarlet and dos2unix
2. Go to build folder
3. Run bash build.sh
4. Copy treble-overlay-realme-x2pro.apk to /system/overlay in your gsi.
5. add the following property to /vendor/build.prop or replace with the attached build.prop
# Patch to add device specific match for treble overlays by mkenfenheuer
ro.vendor.build.overlay.deviceid=RMX1931
Works (confirmed by me):
- Always on display
- 90hz display
'Should' be working:
- Enables DT2W option but enabling does not seem to have any effect to me.
- VOLTE - i cannot test as my carrier does not offer this anymore
- more reliable network connection (i have noticed far less lte issues, but this is my perception)
MISC:
- Imported the settings from realme vendor (i don't know if they are nescessary)
If there are any issues, simply delete the file from /system/overlay with recovery file manager and reboot.
I've added the compiled apk to this post, in case you do not want to build it yourself.
mKenfenheuer said:
Hi all,
as the GSI topic here is still having a few issues, i have created a gsi overlay as per phhussons instructions:
https://github.com/phhusson/treble_experimentations/wiki/How-to-create-an-overlay
The source code can be found here:
https://github.com/mKenfenheuer/vendor_hardware_overlay
Build/install instructions:
(Assuming you have a recent Ubuntu/Debian/Mint Linux machine running)
1. Install xmlstarlet and dos2unix
2. Go to build folder
3. Run bash build.sh
4. Copy treble-overlay-realme-x2pro.apk to /system/overlay in your gsi.
As i have currently not flashed any gsi, i would ask you guys to test please.
Preferably with phhussons AOSP 10 gsi.
If there are any issues, simply delete the file from /system/overlay with recovery file manager and reboot.
I've added the compiled apk to this post, in case you do not want to build it yourself.
Click to expand...
Click to collapse
I copy your .apk overlay to /system/overlay and reboot. I am on evolution gsi phh based. Nothing change as far as i notice.
Great initiative @mKenfenheuer !
I'll look into the settings to see if there are other that we could use!
@ospeto from what I see in the commits try to see if volte works and if you can switch user profiles.
exadeci said:
Great initiative @mKenfenheuer !
I'll look into the settings to see if there are other that we could use!
@ospeto from what I see in the commits try to see if volte works and if you can switch user profiles.
Click to expand...
Click to collapse
I can switch user profiles just fine. Havent test volte though. By the way , the maximum brightness of gsi roms are not as bright as stock rom. Is there any fix for it?. I tried setting backlight to 255 but still not fixed.
ospeto said:
I can switch user profiles just fine. Havent test volte though. By the way , the maximum brightness of gsi roms are not as bright as stock rom. Is there any fix for it?. I tried setting backlight to 255 but still not fixed.
Click to expand...
Click to collapse
I assume switching user profiles has not been working until now?
I have just unlocked my bootloader and started working on the kernel source so lets hope i can get this moving.
I will focus on the kernel first and once this is working we can start with getting other things working.
mKenfenheuer said:
I assume switching user profiles has not been working until now?
I have just unlocked my bootloader and started working on the kernel source so lets hope i can get this moving.
I will focus on the kernel first and once this is working we can start with getting other things working.
Click to expand...
Click to collapse
I haven't switch user profile before so i also am not sure. Should i delete your apk and test again?. I can't test volte cuz my sim provider stopped supporting volte. Thank you so much for your effort. I hope you can fix brightness, 90hz display and on display fingerprint. That would be very helpful for gsi users.
The fingerprint must be an overlay issue because even with bootloader unlocked it still works
Problems I'm facing with evolutionx gsi
1-no fingerprint or face unlock (face unlock was removed from Android Q but it can be added)
2-there's no 90 hz refresh rate
3-speaker volume is lower than color is
4-brightness is slightly lower than color os also
5-need the stock camera app for video recording because gcam isn't that reliable with video recording
talalahmed said:
Problems I'm facing with evolutionx gsi
1-no fingerprint or face unlock (face unlock was removed from Android Q but it can be added)
2-there's no 90 hz refresh rate
3-speaker volume is lower than color is
4-brightness is slightly lower than color os also
5-need the stock camera app for video recording because gcam isn't that reliable with video recording
Click to expand...
Click to collapse
There is a fix for the 90hz issue for the OPPO device
90hz just fixed with dtbo.img flashing. U can find it on your how to flash android 10 gsi post's comment. I am using with 90hz now and it is working flawlessly.
ospeto said:
90hz just fixed with dtbo.img flashing. U can find it on your how to flash android 10 gsi post's comment. I am using with 90hz now and it is working flawlessly.
Click to expand...
Click to collapse
Yeah just flashed it and it's amazing
@exadeci all changes were merged into phhussons main repo and will be available in the next release.
He will also include a option in settings to force the display to a specific frame rate (eg.g 60hz) as 90hz will be the default with the overlay.
Sorry for maybe stupid question, but what letters “GSI” stand for?
SamePaul said:
Sorry for maybe stupid question, but what letters “GSI” stand for?
Click to expand...
Click to collapse
GSI -> Generic System Image
If you want to know how to flash one onto your x2 pro have a look here
https://forum.xda-developers.com/re...-to-flash-aosp-android-10-gsi-realme-t4036825
Hello , i think maximum brightness on gsi roms are not as bright as stock one. Is it gsi rom's bug or do we need overlay for it. I want to watch HDR content so i hope this can be fixed.
https://www.techbilla.com/gsi-treble-fixes-for-realme-2-pro/
This one is not working with our device
Can Anyone pls tell anx camera install process for miatoll or curtana With 48mpx
If you have AOSP Android 11, forget about it because it doesn't work yet.
If you have AOSP Android 10, install:
Code:
ANXCameraUnity_190.BountifulDistantHapuka.zip
ANXFrameworkUnity_190.BountifulDistantHapuka.zip
48MPFixQ_181.GlossyIntelligentCock.zip
ANXCameraHotfix.190.BootloopFix.zip
Make sure you enable debugging so that you can recover in case of a boot loop.
I didn't try yet without the anx pro configs but if anyone want to fix portrait mode on all cameras (front & back) you should:
- Download Anx Camera pro from Play Store
- Grant access
-Search portrait
-Enable all (DON'T ENABLE NIGHT PORTRAIT)
-Search hand gestures
-Set hand gestures false
-Save
All done portrait working
Front camera dose not work!!!!!!
All done portrait working
Click to expand...
Click to collapse
Front camera portrait yes, but not back camera portrait unfortunately.
I am using Havoc official vanilla rom in GRAM and it comes with preinstalled anx cam. rom doesn't have any major bug. you can check it out.
devdieded said:
I am using Havoc official vanilla rom in GRAM and it comes with preinstalled anx cam. rom doesn't have any major bug. you can check it out.
Click to expand...
Click to collapse
Is it Android 11?
sush1101 said:
Can Anyone pls tell anx camera install process for miatoll or curtana With 48mpx
Click to expand...
Click to collapse
Search on YouTube
Krishjain0704 said:
Search on YouTube
Click to expand...
Click to collapse
Then Send Me a Video Link For a11
pwnaz said:
I didn't try yet without the anx pro configs but if anyone want to fix portrait mode on all cameras (front & back) you should:
- Download Anx Camera pro from Play Store
- Grant access
-Search portrait
-Enable all (DON'T ENABLE NIGHT PORTRAIT)
-Search hand gestures
-Set hand gestures false
-Save
All done portrait working
Click to expand...
Click to collapse
I'm unable to get portrait working even after following these steps. It just freezes the app whenever I select portrait mode sadly.
On arrow os android 11 anx cam
Tried few days, to make fully functional the 185R version of ANXcamera on EvolutionX 5.3 and crDroid 7.2 rom. Used files from Arrow and Nusantara roms, "Fix_ANXCamera_crash.zip", "JoyUI12-camfix.zip". Finally works all modes (portrait, 64M pictures, slow motion), excepting the back camera video.
Then I installed yesterday the AICP (Android Ice Cold Project) 16.1 unofficial for miatoll rom on my joyeuse phone. Built in ANX/Miui camera working, and as customization options same as crDroid/EvolutionX.
If anybody want to try this AICP rom, I found it on telegram "MIATOLL UPDATES" channel.