Personal speech.
Would help to solve the problem I'm going through.
Was using the ROM "cm-13.0-20160901-UNOFFICIAL-Temasek-i9305" and did the usual procedure (already done several times this process), however an hour to another cell restarted and was caught in the BOOT screen ..
I entered the TWRP mode and received a "No OS installed" message.
Based on that, I tried to install the ROM again, but the TWRP can not read the micro sd and not the internal memory.
From that, I tried to return to original ROM, however I am getting this fault message on ODIN:
<OSM> Enter CS is MD5 ..
<OSM> Binary Check MD5 .. Do not unplug the cable ..
<OSM> Please wait ..
<OSM> Checking MD5 finished sucessfully ..
<OSM> Leave CS ..
<ID: 0/005> Added !!
<ID: 0/005> Odin engine v (ID: 3.1100) ..
<ID: 0/005> File analysis ..
<ID: 0/005> SetupConnection ..
<ID: 0/005> Initialzation ..
<ID: 0/005> Get PIT for mapping ..
<ID: 0/005> Firmware update start ..
<ID: 0/005> SingleDownload.
<ID: 0/005> tz.img
<ID: 0/005> NAND Write Start !!
<ID: 0/005> FAIL!
<ID: 0/005>
<ID: 0/005> Complete (Write) operation failed.
<OSM> All completed threads. (0 succeed / failed 1)
I've used the version of ODIN (3:07, 3:10, 3:12) all display the same error.
I also noticed that when you enter the TWRP and access any folder, I get the message in the log:
unable to mount the store
Failed to mount (invalid argument)
Related
Hi my name is amit today i tired updating my galaxy s2 i9100g with ics (wasnt aware that its not supported) with odin and it showd me fail and now i am unable to switch it on it just shows phon and yellow triangle and computer logo
when i connect it ot pc odin recognizes but kies not can sum1 please help me out m a new to android how can i fix it
is it bricked ?
this what odin showd when i tried to update
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_SEB_I9100XXLPQ_I9100OXXLPD_I9100XXLPQ.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> boot.bin
<ID:0/015> NAND Write Start!!
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
just2mit said:
Hi my name is amit today i tired updating my galaxy s2 i9100g with ics (wasnt aware that its not supported) with odin and it showd me fail and now i am unable to switch it on it just shows phon and yellow triangle and computer logo
when i connect it ot pc odin recognizes but kies not can sum1 please help me out m a new to android how can i fix it
is it bricked ?
this what odin showd when i tried to update
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_SEB_I9100XXLPQ_I9100OXXLPD_I9100XXLPQ.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> boot.bin
<ID:0/015> NAND Write Start!!
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
Click to expand...
Click to collapse
I can't help, but I have a note for you:
I9100 is a different model from your I9100G
So you wasn't supposed to install I9100 roms over your I9100G
you should Install only the roms related to your model.
Sent from my GT-I9100G using Tapatalk
Hey dude, I found something that likely can help you,
check this link:
http://forum.xda-developers.com/showthread.php?p=21471558
Sent from my GT-I9100G using Tapatalk
Don't panic. You can boot into Download Mode and odin recognizes your phone.
You are not bricked.
just2mit said:
Hi my name is amit today i tired updating my galaxy s2 i9100g with ics (wasnt aware that its not supported) with odin and it showd me fail and now i am unable to switch it on it just shows phon and yellow triangle and computer logo
when i connect it ot pc odin recognizes but kies not can sum1 please help me out m a new to android how can i fix it
is it bricked ?
this what odin showd when i tried to update
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_SEB_I9100XXLPQ_I9100OXXLPD_I9100XXLPQ.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> boot.bin
<ID:0/015> NAND Write Start!!
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
Click to expand...
Click to collapse
I encountered this things once. i check and found out that i did not insert my simcard. then after inserting it i can boot normally. so you better check if the simcard is there
phone was havaing problem of null imei and was not accepting code *#7284# so i flashed it
now having an other problem of phone not starting in normal mode
tryed tto many version but nothing changed
always reboot on recovery menu
i've try with theses versions
Code:
I9300XXEMC2_I9300VFGEMD1_SFR_4.1.2.zip
Code:
I9300XXALEF_I9300XEFALE1_XEF.zip
Code:
recovery-cwmtouch-6.0.3.2-GTI9300.tar
RR_JB_V3.1.4_AOKP_4.2.1_I9300.zip
Code:
CODE_I9300XXBLH1_928452_REV00_user_low_ship.tar.md5
MODEM_I9300XXLH1_REV02_REV04_CL1172449.tar.md5
CSC_OXE_I9300OXEBLF1_CL777132_REV00_user_low_ship.tar.md5
Code:
CODE_I9300XXEMA2_836582_REV00_user_low_ship.tar.md5
MODEM_I9300XXELLA_REV02_REV04_CL1214143.tar.md5
CSC_WIN_I9300WINEMA1_811450_REV00_user_low_ship.tar.md5
flashed with odin & nspro
Code:
Initialising connection...
Checking if protocol is initialised...
Protocol is not initialised.
Initialising protocol...
Handshaking with Loke...
Beginning session...
Session begun
Reading PIT from device...
PIT read successfully
Uploading BOOTLOADER
BOOTLOADER upload successful
Uploading CACHE
CACHE upload successful
Uploading HIDDEN
HIDDEN upload successful
Uploading RADIO
RADIO upload successful
Uploading RECOVERY
RECOVERY upload successful
Uploading SYSTEM
SYSTEM upload successful
Uploading TZSW
TZSW upload successful
Uploading BOOT
BOOT upload successful
Ending session...
Rebooting device...
Press NEXT to continue...
corrupted efs. restore it or replace the motherboard
Glebun said:
corrupted efs. restore it or replace the motherboard
Click to expand...
Click to collapse
it's possible to repair efs using microbox or nspro or any other samsung box
my problem is phone not booting into normal mode
because of the corrupted efs
Glebun said:
because of the corrupted efs
Click to expand...
Click to collapse
phone fixed by flashing only one file
efs still corrupted but now phone is booting into normal mode
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> _______________I9300.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> _____.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
cool
Hi all, I will explain briefly what happens to my S3 (GT-I9300) is "soft brick" enters the "downloads" only. If I want to enter the recovery mode, restarts and freezes once the logo of Samsung.
I tried to make a flash via Odin (1.85, 3.07 version) by following the appropriate steps. A negative result (fails). I read that it could be the file "PITS" I have also tried different and never-ending operation is always the result is "fail". After that I have to turn off the phone by removing the battery, it is the only way to recognize ODIN again.
The end result is always the same:
<ID: 0/005> Added !!
<OSM> Enter CS for MD5 ..
<OSM> Check MD5 .. Do not unplug the cord ..
<OSM> Please wait ..
<OSM> I9300UBUGML1_I9300ANCUGMK1_I9300UBUGMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 Sucessfully finished ..
<OSM> Leave CS ..
<ID: 0/005> Odin v.3 engine (ID: 5) ..
<ID: 0/005> File analysis ..
<ID: 0/005> SetupConnection ..
<ID: 0/005> initialzation ..
<ID: 0/005> Get PIT for mapping ..
<ID: 0/005> Firmware update start ..
<ID: 0/005> sboot.bin
<ID: 0/005> Write Start NAND !!
<ID: 0/005> Transmission Complete ..
<ID: 0/005> Now Writing .. Please wait about 2 minutes
<ID: 0/005> Receive Response from boot-loader
<ID: 0/005> FAIL!
<OSM> All threads completed. (Succeed 0 / failed 1)
Try flashing bootloader BLFB then try firmware flash with pit. If still the same then your emmc chip is broken.
boomboomer said:
Try flashing bootloader BLFB then try firmware flash with pit. If still the same then your emmc chip is broken.
Click to expand...
Click to collapse
thank you very much I will try and tell you
agus_311 said:
thank you very much I will try and tell you
Click to expand...
Click to collapse
Hi. There was no case, apparently the cell is damaged. Any other suggestions? or is it like a cute paperweights... =(
Thanks
Hello. I have a problem. I have a samsung galaxy s6 unit g925x demo edge. I wanted to write it soft 1 g925f a file from which the normal S6 edge. When I included the phone in bootloader mode and tried to write it with a soft by Odin to the odinie jump out the mistake .... Here below you log oo Odin:
<ID: 0/004> Added !!
<OSM> Enter CS for MD5 ..
<OSM> Binary Check MD5 .. Do not disconnect the cable ..
<OSM> Please wait ..
<OSM> Checking successfully completed MD5 ..
<OSM> Leave CS ..
<ID: 0/004> Odin engine v (ID: 3.1100) ..
<ID: 0/004> Analysis file ..
<ID: 0/004> SetupConnection ..
<ID: 0/004> Initialzation ..
<ID: 0/004> Download PIT for mapping ..
<ID: 0/004> Firmware start the update ..
<ID: 0/004> SingleDownload.
<ID: 0/004> boot.img
<ID: 0/004> NAND Record start !!
<ID: 0/004> cache.img
<ID: 0/004> cm.bin
<ID: 0/004> FAIL!
<ID: 0/004>
<ID: 0/004> Complete (Write) operation failed.
<OSM> All threads completed. (Good luck 0 / failed: 1)
Now when I try to turn the phone to either stands on logu galaxy s6 demo unit edge OR appears: An error occurred while updating the device software.Use function of the emergency recovery intelligent software switch. When you want to write it by an intelligent software switch to show that the ten model or g925x demo NO Support scales This program ...
I do not know what to do Help please. I count on it
Try rooting my Samsung j7 Prime SM-G610M device with CF-Auto-Root. The case is that under the CF-Auto-Root corresponding to version 8.1.0 Oreo of my Mobile with the same number of compilation, but when flashing from Odin, it tells me everything is correct, but it restarts, I verify with Root Checker that I have rooted, but he says no. Below I leave the log generated by Odin to review.
Code:
<ID: 0/005> Added !!
<OSM> Enter CS for MD5 ..
<OSM> Check MD5 .. Do not unplug the cable ..
<OSM> Please wait ..
<OSM> Checking MD5 finished Successfully ..
<OSM> Leave CS ..
<ID: 0/005> Odin engine v (ID: 3.1203) ..
<ID: 0/005> File analysis ..
<ID: 0/005> SetupConnection ..
<ID: 0/005> Initialzation ..
<ID: 0/005> Get PIT for mapping ..
<ID: 0/005> Firmware update start ..
<ID: 0/005> SingleDownload.
<ID: 0/005> recovery.img
<ID: 0/005> cache.img
<ID: 0/005> RQT_CLOSE !!
<ID: 0/005> RES OK!
<ID: 0/005> Removed !!
<ID: 0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID: 0/004> Added !!
<ID: 0/004> Removed !!
<ID: 0/004> Added !!
<ID: 0/004> Removed !!
[/ code]
Forgive my English, I'm from Argentina and use the Google translator ...