Good day all
Need some help with my phone?
Blu studio G
The issue:
I had my phone rooted using kingroot.
I wanted to play Pokémon go and thought maybe a update to the os would make it work.
I forgot I had rooted the phone and did an ota update D:
my phone will boot only to the recovery screen.
So now I have the recovery screen and nothing more, will not load past it. I have tried getting the stock rom and placing it on the sd card however it fails to load ( will not update). I may not have the right rom? I thought also well F it I’ll pop on a custom rom one found on this site ( mystic os)
Again when placed on sd card and told to update from sd it does not work….
So I am lost as to what I can do. When plugged into my pc I hear it get auto detected then it dies and get auto detected again and keeps looping . I tried using fastboot but the phone seems to not be being picked up by windows right… also used the blu drivers for windows…
I am at a loss and am hoping someone has an idea of something for me to try…. I have the android sdk but no idea how to use it (was thinking I might need to use adb ???)
any and all help would be much appreciated
self bump :crying:
Related
Hello everybody,
I am new here, but after many searches I found out that this forum can be quite useful. Unfortunately I couldn't find the answer to my problem. Here you go, I start very well for my first thread:
I just got a HTC one M7 international version GSM from a friend, very nice phone and it was already rooted and had Trickdroid installed on it. I started to talk to my friend and he told me I should install KIt Kat on the phone... and from there it went all wrong...
I tried to install a KIT KAT rom I found online, it didn't work and the phone wouldn't start anymore, I would just have access to recovery mode (CWM is installed) and fastboot/bootloader. From there, the phone wasn't recognized anymore by my pc when connected to USB. I then used a mini USB cable to connect a USB key with different .zip file to load them to the phone.
After many attemps, one file finally worked (all the other would abort installation), it was insertcoin M7 kustomizer... I know I should have had reloaded Trickdroid 11.0.0 on it, but it was taking ages to download and went the fast way... which was a really bad decision I guess.
After the installation of insertcoin, the phone rebooted and... rebooted...and keeps rebooting to the HTC white screen (with the red warning: this build is for...)... it goes on and on...
Only thing I can do is hold the volume down key when it reboots and then it takes me to fastboot/bootloader. From there when I try to go to recovery mode it goes to recovery mode for half a second and reboot directly to the white HTC screen over and over again....
Also, USB device is not recognized (but strange, HTC sync manager starts even though it tells me no phone is connected).
Now I have the Trickdroid 11 file ready (1.1GB) but there is no way to install it on the phone... I really don't see how to do it anymore, did I really screw up big time and my phone is more or less a dead weight?
I am going to Kuala Lumpur, Malaysia at the end of the week, maybe someone will be able to find a solution for me...
I shouldn't have touched a phone that was working very well....I know...
Nobody? So my HTC one is dead?
Is the all in one tool going to help? I installed it but since my phone is not recognized by the computer (windows 8.1) when connected via USB, I don't seem to be able to do anything...
sedoriku said:
Is the all in one tool going to help? I installed it but since my phone is not recognized by the computer (windows 8.1) when connected via USB, I don't seem to be able to do anything...
Click to expand...
Click to collapse
This is all if you can find a way to get files to your phone...
I'm not sure which recovery you have but when upgrading from Android 4.2.2, and 4.3 the recovery you are using needs to be updated to the most current version. For example if you are running TWRP recovery you need to be running TWRP 2.6.3.3 for everything to run smoothly. In order to do this though you will need to download your original ROM (No matter how long it takes). Then go google play store and download goo.im and update you recovery with openrecoveryscript and update from there and you should be fine. I would also like to note that it's fully recommended that when you flash 4.4 KK you do a full wipe. This means userdata/cache/dalvik cache wipe, otherwise you will run into problems. Let me know if I missed anything or if you have anymore questions!
Thank you, but unfortunately I still couldn't find a way to access the files on the phone, no matter what I do. The phone starts by itself to the HTC white screen when I connect it to the main to charge it... I can only access fastboot/bootloader... I feel useless...
I feel your pain
sedoriku said:
Thank you, but unfortunately I still couldn't find a way to access the files on the phone, no matter what I do. The phone starts by itself to the HTC white screen when I connect it to the main to charge it... I can only access fastboot/bootloader... I feel useless...
Click to expand...
Click to collapse
After my htc one freezing on the 'quietly trickdroid' loading screen my phone will now not turn on, AT ALL! I think it's screwed : S
I just arrived in Kuala Lumpur and took it to a little shop, they told me they will fix it for me by tomorrow for 50USD... I'll let you know tomorrow if they managed to make the magic happen. I think they would reinstall stock, but that's fine with me, much better than a bricked "rooted" phone. It will take me a while before I start to screw up with a phone again...
Hello everyone,
Last month I rooted my LG G2, and installed cyanogenmod. Everything was going smoothly but for some reason I decided to restore my phone from a backup I made before installing cyan and then just continued using it like that. Two nights ago an android software update took place automatically overnight and when I woke up it was just stuck in the TWRP menu. I tried restoring from previous backups, wiping it and re installing the cyanogenmod that was still on the virtual SD card to no avail, and finally completely formatting the phone to see if I could get it to show up on the computer because it makes the connection noise but it doesn't show up as a device or hard drive.
So now when it boots up it shows the LG logo and then brings me back to TWRP but now I have no restore points on the phone. So is there anyway to get my computer to recognize it so I can add files and hopefully get a working backup on the phone? Or is there a way I can even just flash the stock firmware on it again? Or am I out of luck?
cj0435 said:
Hello everyone,
Last month I rooted my LG G2, and installed cyanogenmod. Everything was going smoothly but for some reason I decided to restore my phone from a backup I made before installing cyan and then just continued using it like that. Two nights ago an android software update took place automatically overnight and when I woke up it was just stuck in the TWRP menu. I tried restoring from previous backups, wiping it and re installing the cyanogenmod that was still on the virtual SD card to no avail, and finally completely formatting the phone to see if I could get it to show up on the computer because it makes the connection noise but it doesn't show up as a device or hard drive.
So now when it boots up it shows the LG logo and then brings me back to TWRP but now I have no restore points on the phone. So is there anyway to get my computer to recognize it so I can add files and hopefully get a working backup on the phone? Or is there a way I can even just flash the stock firmware on it again? Or am I out of luck?
Click to expand...
Click to collapse
so you formatted your sdcard too. (jokes aside, thats genius). Mind my sarcastic fun-poking, you will have to put your phone into emergency mode and use a tool to flash the stock rom. Usually you can navigate to the manufacturers support page and they will have an updater tool that can flash one of the updates. if not, then scour the forums for an unbrick guide that will flash the stock rom from emergency mode.
Hello,
The other day I finally found a way to root my Quanta Verizon Ellipsis 8 tablet QTAQZ3 with KingRoot. It was working great for about 3-4 days. I was finally able to use apps like Apps2SD to install my games and large apps on the SD card, use chainfire3D and the like and some other useful apps that actually worked to shutdown processes I didn't want running in the background to clear up a good 300MB of extra ram. It was working great.
The day before yesterday however I was routinely using the tablet and it was in the middle of loading Fifa16. Suddenly the tablet shutitself down and rebooted all on its own. When it rebooted however it only brought up the Android Splash screen for a few seconds, after that it goes to a blank Back-Lit screen(so I know its still on) and just sits there. I have left it there for 6 hours+ hoping it would eventually miraculously boot but it just sits there until the power button is held down to shut it off.
Now since I get it to power up and show the android splash screen and also access the recovery mode by holding PowerButton+Volume down I am hoping/assuming it is only softbricked.
I have tried to putting a new Rom.zip on the SD card and accessing "Update from external storage" in recovery mode, but I keep getting Permission Denied. I have tried burning a Rom image to the sd card to try to boot from it but nothing happens. I have tried Factory Reset in the recovery mode and it does basically nothing other than delete my user data. Upon reboot the same problem persists.
ADB doesnt seem to be an option because I can only get windows to install a Generic MTP Device driver(it does show up as the model number of the device properly QTAQZ3 though) but thats all it will do. Doesnt show up in drive list to access anything, cant install adb driver because it doesnt detect the device. I have tried forcing adb driver install but it just tells me the proper driver is already installed.
I am hoping somebody might be able to help me solve the ADB driver issue so I can sideload a new rom/bootloader to the device or help me figure why it keeps saying Permission Denied when trying to update .zip from my sd card.
Please help, thanks you.
Dang
Where dod you get the rom updat.zip?
Sent from my SM-G920P using XDA-Developers mobile app
Bump
Sent from my SM-G920P using XDA-Developers mobile app
same happened to me with kingo root on the QTAQ73 model
Any new development on this? I have the same issue except mine stays on the boot animation until the power runs dead or I shut it off.
Update - I ended up taking the tablet to Verizon and luckily I still had a week left of my warranty. Sent it in Monday got one sent back Saturday running Android 5.1.1 and rooted it with KingRoot. Working on swapping King with SuperSu but that's how I got it stuck in bootloop last time so I'm a bit cautious.
I [email protected] Verizon
I also have this problem. ellipsis 8 QTAQZ3 won't boot past the Verizon screen. Repair center wouldn't do anything for me, even though it's a software issue, because I'm outside of warranty time. Verizon sucks.
All the intelligent people tinkering with droid tablets and no one has an answer on this? I've looked everywhere.
Hello guys, i realize this is an older thread but the other day i soft bricked my Quanta Ellipsis 8 QTAQZ3... Can someone help me out with a stock rom for reflashing? Willing to donate for your support! Thank you!
I have a QTAQZ3 currently running 4.2.2. I captured the OTA url and downloaded an update bin file. I'm not exactly sure how bins compare to flashable zips, nor do I know what to do with a bin file. I am hoping that by posting it, someone with the right know-how can help us fix all these bricked tablets.
https://drive.google.com/open?id=1LmyrA3eGcVL3sCMB3okBdsoqA0Gv5RZE
Hi all.
I'm wondering if anyone has a viable workaround for the pile of bloatware on the QTAQZ3, I was gifted on a few years ago and it is telling me that it is running out of room. The math for the misc junk file doesn't add up. Display counts 5.2 GB, and clicking the line often shows less than 3 MB.
So, for Christmas my daughter's mom got her an A33 Q88H QuadCore Softwinner tablet, and we discovered the OS it came with had some very strange issues related to a lack of compatibility with Google Play, so I tried to get around that with software, but I needed to be rooted. However, I had bizarre difficulties with SuperSU, unlocking the bootloader, rooting, and even more difficulties trying to flash a custom recovery that I could use to ROOT-- the obscure china tablet had no TWRP or CWM support. I finally tried a very convoluted method of flashing what appeared to be a ROM for the A33 Allwinner tablet, which hadTWRP already installed, so I could use TWRP to root it, and then finally fix the software issues.
However, the process didn't work, and when I rebooted the phone, I found it stuck on a black screen with a tiny android symbol, and that's how it's been since. Holding volume and power button only reboots it to the same screen -- no bootloader or anything, so I can't find any way to try to flash a factory ROM to get it back to regular settings. When I plug it into my computer, it makes the input noise, and shows up in Device Manager as "Android Device" with "Android ADB Interface" drivers successfully installed, but ADB doesn't recognize it as a device, and I can't get it into any sort of download mode -- it isn't recognized in My Computer as a hard drive. So, I can't find a way to interface with the tablet to reflash a stock ROM. :frown:
It's her Christmas present, so I don't want to admit that I've broken it; I've been trying to solve it all night for 12 hours straight, but I just can't find anything that works! Is there any way you guys can help me? :crying:
I tried to attach some pics but the uploader isnt working.
bump
In an attempt to switch custom ROMs I wiped my previous ROM and went to install my new ROM through a zip file in TWRP and it said the installation failed twice. When I restarted my phone it will not pass the LG logo screen (looks like a bootloop but I don't think that is it) as well as the original combination of buttons I used to start TWRP is not working either. I have been trying to manually install a ROM through a flash tool on PC but my PC isn't detecting the phone as a removable device even though an SD is inserted as well. Completely lost and bought a really bare bones phone over a month ago but I want my better and higher quality phone back and it's sooo frustrating. Any help is greatly appreciated. Thanks!
I need a lot more info. Phone model? I know log but what kind. Android os? The ROM in question? It's highly unlikely you erased a recovery by flashing a ROM from recovery. The only time I've ever had an issue like yours was when I tried to downgrade my bootloader on an old s3 years ago. And that was a nightmare to fix. If lg is like Samsung you can take a SD card the same size as your devices internal and build a replica of your internal on the SD, and like a PC failing to boot from the HDD it might default to the SD to boot. Samsung does.
LG D851. LG G3 T-Mobile Variant.
I was using CyanogenMod before and I was trying to flash Lineage OS.
What would be the steps to build it on the SD? If you'd be willing to tell me or just link me to something.
If you need any more info on anything just let me know. Thanks!