Help. I have a Superpad 8 Chinese tablet that will not boot.
At first, it would boot only as far as the "Andrtoid" boot animation and just hang there.
Then I started trying to restore a different ROm to it.
ADB sees it, and I was able to pull the /system directory from the tab.
After trying to flash a ROM to it using this "Livesuite" app I found, , which completed successfully, but since then, when the tab boots, it displays absolutely nothing.
ADB still sees it, but whatever command I send (adb reboot recovery or adb reboot bootloader), it just reboots and does nothing...
Can ANYBODY help, please?
I am still very new to ADB & troubleshooting Android, so I need all the help I can get!
Thanks in advance, and if you manage to get this tab working for me, I'll buy you a beer or 5...
skoop99 said:
Help. I have a Superpad 8 Chinese tablet that will not boot.
At first, it would boot only as far as the "Andrtoid" boot animation and just hang there.
Then I started trying to restore a different ROm to it.
ADB sees it, and I was able to pull the /system directory from the tab.
After trying to flash a ROM to it using this "Livesuite" app I found, , which completed successfully, but since then, when the tab boots, it displays absolutely nothing.
ADB still sees it, but whatever command I send (adb reboot recovery or adb reboot bootloader), it just reboots and does nothing...
Can ANYBODY help, please?
I am still very new to ADB & troubleshooting Android, so I need all the help I can get!
Thanks in advance, and if you manage to get this tab working for me, I'll buy you a beer or 5...
Click to expand...
Click to collapse
Is youre problem solved??
cejean said:
Is youre problem solved??
Click to expand...
Click to collapse
Hi Have the same problem if anyone can help Please. I'm still new to all this
same problem any ideas
any ideas to fit the problem?
Hello, I had a very similar problem which I had which might help with a BC1003 user.
first was the internal LCD cable came loose.. common problem...
Another was it would not boot at all. So I used Livesuit with "sun4i_crane_bc1003.img" dated August 2012... November 2012 did not work!.
It does appear to matter which .img file you use (unfortunately), because the WiFi does not work with the November version.
hi ... same tablet, some problem...
skoop99 said:
Help. I have a Superpad 8 Chinese tablet that will not boot.
hi ... same tablet, some problem...
after 3 days trying every possible firmware, and booting them from external sd card
all i could do was change de logo at boot start from (mapan to kosaco, to oem etc..)
than i had the idea of removing the internal sd card to look at it ...
and guess what it still runs the same with out no sd card in or out
so i thought ... the sd card was never read in the first place cause is damage or corrupted...
so on the 4th day im trying to format and partition the new internal sd card... hoping for the best.
by know u may not even have that tablet anymore but is food for thought for a next android promblems.
:good:
Click to expand...
Click to collapse
Hi there I think I have softbricked my Nabi 2. I tried to update the software from ICS to JB using files from the XDA Nabi 2 Wiki but have come to a massive problem. I can't boot back into TWRP because all I get is an Android laying down with an ! on his chest. I can't re-install TWRP because my Windows 8 PC can no longer see the device!! I can get into the tablet options menu with fastboot, forced recover etc. I think the biggest problem is getting the PC to see the device.
If I try selecting different options in the tablet boot menu then Windows will see the device as Android ADB Device or MTP USB Device.
Can anyone help me get over this problem? I'm not used to using shell commands but fear I will have to install the Android environment to use ADB to get things working.
Please help if you can as this tablet belongs to a nephew of mine and he is missing his YouTube. I am close to tears trying to find the solution. I have read and re-read XDA posts in case I missed something.
Many Thanks In Advance.
Doozeman
Hi guys,
I just bought two brandnew Cube U27GT S (MTK 8127) tablets and tried to install a custom rom. Unfortunately the tab hard bricked while trying to flash it with SPFT. Now I can´t turn on the tab anymore - all black. I even can´t open the recovery mode and Win 7 doesn´t found the tab anymore, it shows unknown device in the device manager!?
Meanwhile I deinstalled all MTK drivers with usbdeview and installed them again with the help of the second tab. But it has no effect of the damaged one it´s still an unkown device.
Maybe anyone has an idea how to unbrick it? Would be great to get any help! :crying:
No hope anymore?
I have the same problem can only get into recovery, factory reset does seem to do anything still hangs on boot, looks like I need to update via sdcard?
so I was installing shaunMTs rom from freaktab on my daughters tablet and when I did the flash instead of rebooting back into recovery to flash rom it just turned off I was tolod by shaunMT that using rk tools I might bring it back problem is I cant get any drivers that will work with the tablet in current state the pc recognices it as an android but that's it I tried using rkandroid 1.37,Rockchip_Batch_Tool_v1.6 , RK3xxx_firmware_tools_5.99.07.00, hell not even the SP_Flash_Tool_v5.1420 from the nextbook page recognizes it or theres no way to know I think so what can I do or what should I do laptop is running windows 10 by the way idk if it matters thanks for any help its greatly appreciated as I keep getting asked by my daughter every day if the tablet its fixed thanks again
Hello everyone,
My name is Max, and i have a problem with a tabelt: note 10.1 GT-N8010.
I wanted to fix this tablet because its not booting anymore, its stuck at the logo. things that i tryed.:
1. i tryed to fix it with odin to install a stock rom< odin is finding my tabelt and its installing everything just fine but its still stuck at the boot logo. even after 30min
2. i tryed to unlock USB debugging but that fail. because ADB is not regonizing my tablet, even with the USB drivers installed.
3. i tryed to use the programm called SkipSoft ToolKit, but this tool kit is also using ADB. and like i sad ADB is not finding my tabelt.
Anyone who could help me with this problem, i have been searching XDA formus and google for 1 day now and didnt find any thing that helped me.
Thx for reading,
Regard Max
maxvg said:
Hello everyone,
My name is Max, and i have a problem with a tabelt: note 10.1 GT-N8010.
I wanted to fix this tablet because its not booting anymore, its stuck at the logo. things that i tryed.:
1. i tryed to fix it with odin to install a stock rom< odin is finding my tabelt and its installing everything just fine but its still stuck at the boot logo. even after 30min
2. i tryed to unlock USB debugging but that fail. because ADB is not regonizing my tablet, even with the USB drivers installed.
3. i tryed to use the programm called SkipSoft ToolKit, but this tool kit is also using ADB. and like i sad ADB is not finding my tabelt.
Anyone who could help me with this problem, i have been searching XDA formus and google for 1 day now and didnt find any thing that helped me.
Thx for reading,
Regard Max
Click to expand...
Click to collapse
I think you accidentally stumbled into the wrong forum. This one is for the P7500/7510 type 10.1 tablet... The very first one.
I'm betting you'll have better luck with your questions in the correct forum.
Sorry I couldn't help you more.
Best of luck.
Olivier V said:
I think you accidentally stumbled into the wrong forum. This one is for the P7500/7510 type 10.1 tablet... The very first one.
I'm betting you'll have better luck with your questions in the correct forum.
Sorry I couldn't help you more.
Best of luck.
Click to expand...
Click to collapse
awh thx,
im very sry that i did this, im kinda new here :/:angel: