Currently i am using Oxygen OS 3.1.3.
I was using Hydrogen OS.
The sound clarity in H2OS is far better than OOS due to Dirac HD Sound.
Is there any MOD available to get Dirac HD Audio on OOS?
If not available then can someone port it from H2OS?
Dirac HD Audio is available on all versions of H2OS MM and LP for Oneplus X.
It is also available on Oneplus 2 OOS
Currently I'm using this on my OOS 3.1.3
http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
It's a compilation of sound mods packed into one App/MOD.Not only does it have Dirac HD Audio, but also it has many other audio enchancments inside.
I think that you should try it
Caraparbor said:
Currently I'm using this on my OOS 3.1.3
http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
It's a compilation of sound mods packed into one App/MOD.Not only does it have Dirac HD Audio, but also it has many other audio enchancments inside.
I think that you should try it
Click to expand...
Click to collapse
Can you mention the steps followed by you to installed this MOD?
Danish66 said:
Can you mention the steps followed by you to installed this MOD?
Click to expand...
Click to collapse
Just:
1. Install SuperSu
2. Flash Mod with TWRP (Normal Version. Not systemless)
3. And enjoy
You should have XtremeMusic App after flash.
Try A.R.I.S.E Sound Systems, its what I use.
Joshwin Aranha said:
Try A.R.I.S.E Sound Systems, its what I use.
Click to expand...
Click to collapse
Thanks for your info! I tried this with 3.1.1, the installation was so easy compared to the complicated viper4android installation. The effect is wow...! Its like attaching a power amplifier into my OPX :good:
motherninja said:
Thanks for your info! I tried this with 3.1.1, the installation was so easy compared to the complicated viper4android installation. The effect is wow...! Its like attaching a power amplifier into my OPX :good:
Click to expand...
Click to collapse
I'm glad, pass the info along
Related
Hey Guys!
I actually have been looking for a way to get Viper4Android working today. And i actually found a method to do it. By luck, OnePlus posted the Oxygen 3.0 based on android 6.0.1 today. This version of android is compatible with the newest version of Viper4Android. This version actually comes without an equalizer like 2.2... but oh well. I liked viper way better anyway.
Just wanted to give my 2 cents to the forum.. just wanted to let people know there is opportunity here to enjoy better music while you are waiting for CM 13 like me =)
How i got it to work:
- First install Oxygen 3.0 with a custom TWRP created for Oxygen 3.0 (see this url: link to oneplus forums)
- Secondly, use the custom made SuperSU (credits to @Yash98) = this link
- When the phone is updated and rooted, you can install BusyBox through the app store. After you did that download the APK of Viper on your phone via the original XDA thread
- Don't run it yet. Download SELinuxModeChanger via the original XDA thread.
- Change the mode to permissive, go back to Viper and install the drivers. It'll ask you for a reboot, do so. After the reboot open Viper4Android and press the 3 dots on the right high corner. Examining the driver status would show that the driver is enabled. If it's not. Try to empty the google music cache & removing the data (i did so somewhere in the process).
Hope this can make anybody happy. I'm an audiophile so i'm more than happy.
- Shakaraja.
The new Beta of OxygenOS 3.0 does NOT come with any audio enhancements, so you may even flash packages of audio mods, as I did
MaxtremePL said:
The new Beta of OxygenOS 3.0 does NOT come with any audio enhancements, so you may even flash packages of audio mods, as I did
Click to expand...
Click to collapse
Can you share the audio mods you used?? Thanks
---------- Post added at 10:43 PM ---------- Previous post was at 10:42 PM ----------
shakaraja said:
Hey Guys!
I actually have been looking for a way to get Viper4Android working today. And i actually found a method to do it. By luck, OnePlus posted the Oxygen 3.0 based on android 6.0.1 today. This version of android is compatible with the newest version of Viper4Android. This version actually comes without an equalizer like 2.2... but oh well. I liked viper way better anyway.
Just wanted to give my 2 cents to the forum.. just wanted to let people know there is opportunity here to enjoy better music while you are waiting for CM 13 like me =)
How i got it to work:
- First install Oxygen 3.0 with a custom TWRP created for Oxygen 3.0 (see this url: link to oneplus forums)
- Secondly, use the custom made SuperSU (credits to @Yash98) = this link
- When the phone is updated and rooted, you can install BusyBox through the app store. After you did that download the APK of Viper on your phone via the original XDA thread
- Don't run it yet. Download SELinuxModeChanger via the original XDA thread.
- Change the mode to permissive, go back to Viper and install the drivers. It'll ask you for a reboot, do so. After the reboot open Viper4Android and press the 3 dots on the right high corner. Examining the driver status would show that the driver is enabled. If it's not. Try to empty the google music cache & removing the data (i did so somewhere in the process).
Hope this can make anybody happy. I'm an audiophile so i'm more than happy.
- Shakaraja.
Click to expand...
Click to collapse
Thanks for the detailed guide... Will test now thanks
anees167 said:
Can you share the audio mods you used?? Thanks
Click to expand...
Click to collapse
Divine Beats by Royal Seeker (DolbyDigital+ version) located at:
http://theroyalseeker.github.io/
In order for this mod to work you need permissive SElinux
I'm not able to install custom recovery it just gets stuck at the one plus logo. And when I reboot normally it gets back to stock recovery. Any solution plz
Did you disable boot to stock recovery and also you may have to fastboot recovery
Can I reduce the loudest sound of OxyGenOS3 with Viper4Android?
I have distorted sound using the v4a. How fix it?
Bluetooth doesn't work when V4A drivers is installed.
Anyone can solved this problem?
Thanks, got it working. Don't notice too much difference in sound, but maybe I just haven't foudn the right settings yet.
It dosent work getting distorted sound
viper4android install than sound break problem is fix?
mohamm3edadam said:
I'm not able to install custom recovery it just gets stuck at the one plus logo. And when I reboot normally it gets back to stock recovery. Any solution plz
Click to expand...
Click to collapse
You need the TWRP version meant for H2OS. You will find it in any H2OS based ROM thread.
Skick3 said:
Can I reduce the loudest sound of OxyGenOS3 with Viper4Android?
Click to expand...
Click to collapse
Yes, there are options. Find gain controls and tweak them to your preference.
ras_fyah said:
I have distorted sound using the v4a. How fix it?
Click to expand...
Click to collapse
Akhil701 said:
It dosent work getting distorted sound
Click to expand...
Click to collapse
If you still are on OOS 2.2.x then V4A will not work. This fix is specifically meant for OOS 3.
If you are on OOS 3, then try reflashing OOS 3 with a clean flash. This might fix it, but only if you are on OOS 3.
mvha said:
Bluetooth doesn't work when V4A drivers is installed.
Anyone can solved this problem?
Click to expand...
Click to collapse
Did you install the right drivers? And also check if you set the SELinux mode to Permissive.
locxFIN said:
Thanks, got it working. Don't notice too much difference in sound, but maybe I just haven't foudn the right settings yet.
Click to expand...
Click to collapse
Search XDA Forums for V4A profiles and use a preferred profile according to your type of music.
whwhdtk5689 said:
viper4android install than sound break problem is fix?
Click to expand...
Click to collapse
Only if you have flashed the latest beta of OOS 3. This fix is OOS 3 specific and DOES NOT APPLY TO OOS 2.
arch_geek said:
Only if you have flashed the latest beta of OOS 3. This fix is OOS 3 specific and DOES NOT APPLY TO OOS 2.
Click to expand...
Click to collapse
yes. i'm oos 3.0 MM.
wow i'm install now viper4android !
thank you !
arch_geek said:
Did you install the right drivers? And also check if you set the SELinux mode to Permissive.
Click to expand...
Click to collapse
You've Got a Point. I have installed wrong version of V4A. Now working all. Thank You
Sorry for the noob question and if I'm posting at the wrong place. When you first install OOS 3.0 it's not rooted right? How do I root it? Thanks for the help.
shakaraja said:
Examining the driver status would show that the driver is enabled. If it's not. Try to empty the google music cache & removing the data (i did so somewhere in the process).
Click to expand...
Click to collapse
Hm i had the same problem. Driver Status was false.
My Workaround was i clicked in Viper many Menus up an down. Lock Effect Mode disable to speaker. UI Setting to Expert and suddenly the Driver Status was True.
No cleaning data. I didn´t installed google play music.
With Viper4Anroid on OO2 Oxygen3 the sound are definitly noiser and better. (Master Gain (Limiter) / Output Gaine -20db)
Thx for the hint with these app.
_Epix_ said:
Sorry for the noob question and if I'm posting at the wrong place. When you first install OOS 3.0 it's not rooted right? How do I root it? Thanks for the help.
Click to expand...
Click to collapse
How to root your phone. You find it in these guide
> http://forum.xda-developers.com/oneplus-2/general/guides-how-to-guides-beginners-t3146568
Last time I used viper was the nexus 4 days almost 2 years ago... They have improved the audio (most likely new audio hardware on OP2) but yh it sounds a lot better then stock oxygenOS 3 it does the job till Maxxaudio is back
MaxtremePL said:
Divine Beats by Royal Seeker (DolbyDigital+ version) located at:
http://theroyalseeker.github.io/
In order for this mod to work you need permissive SElinux
Click to expand...
Click to collapse
Thank you soooo much! This did the trick. I was so frustrated with the MM update until you saved my ears with this suggestion. :good:
_Epix_ said:
Sorry for the noob question and if I'm posting at the wrong place. When you first install OOS 3.0 it's not rooted right? How do I root it? Thanks for the help.
Click to expand...
Click to collapse
If you flashed OOS 3, it is highly likely that the build was not a pre-rooted build. To root follow this guide at this link :
http://forum.xda-developers.com/oneplus-2/general/guides-how-to-guides-beginners-t3146568
anees167 said:
Last time I used viper was the nexus 4 days almost 2 years ago... They have improved the audio (most likely new audio hardware on OP2) but yh it sounds a lot better then stock oxygenOS 3 it does the job till Maxxaudio is back
Click to expand...
Click to collapse
Actually V4A can be tweaked to sound better than MaxxAudio. Try XtremeMUSIC mod by androidexpert35. It includes V4A as an addon.
Link to the above mod is here: http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
&roid said:
Thank you soooo much! This did the trick. I was so frustrated with the MM update until you saved my ears with this suggestion. :good:
Click to expand...
Click to collapse
Try XtremeMUSIC mod. Link: http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
Hi, I modified some file in the old v4a version to be able to install on new android 7.0 Nougat in enforcing mode until some permissive kernel will be released
I tried the new vers. of v4a (ViPER4Android_2.5.0.5_guitardedhero) but didn't like the new interface and the new sound quality, this old vers. has the super audio quality driver enabled together with Dolby Atmos and offers an improved audio quality over the newest one (in my opinion)
by doing these 3 steps above you'll also have enhanced audio output volume through headphones
STEP0. make sure you already have stericson's busybox installed on your phone before anything else
STEP1. just flash this zip file through TWRP www120.zippyshare.com/v/Jr4TLKB6/file.html
STEP2. replace these 2 files from this archive in /system/etc and give them permission 644 (rw-r-r) www79.zippyshare.com/v/GXEFYNUh/file.html
STEP3. reboot
enjoy v4a and dolby atmos working together on SElinux enforcing mode
Nice!..Can we make the stereo sound of our a5 stereo?
Followed your steps, but v4a didn't install properly.
status - abnormal
audio format - unsupported.
Using A7 2016 Nougat
ashwini215 said:
Followed your steps, but v4a didn't install properly.
status - abnormal
audio format - unsupported.
Using A7 2016 Nougat
Click to expand...
Click to collapse
Working for me. A5 6
V4a 2.5.0.5
Sent from my SM-A510F using Tapatalk
rijuzz said:
Working for me. A5 6
V4a 2.5.0.5
Sent from my SM-A510F using Tapatalk
Click to expand...
Click to collapse
He also worked for me
rijuzz said:
Working for me. A5 6
V4a 2.5.0.5
Sent from my SM-A510F using Tapatalk
Click to expand...
Click to collapse
What's your step?
Whcih busybox are you using?
Supersu or magisk?
I think magisk might be the issue.
Every where i searched, guys are suggesting supersu to be better option for nougat when it comes to installing v4a.
ashwini215 said:
What's your step?
Whcih busybox are you using?
Supersu or magisk?
I think magisk might be the issue.
Every where i searched, guys are suggesting supersu to be better option for nougat when it comes to installing v4a.
Click to expand...
Click to collapse
I didnt install busybox. Using supersu..
I jst flashed v4a 2.5.0.5, after that replaced the xml files as mentioned in step 2 in this post. Thats all
One of the best thing about an unlocked and rooted phone is Viper4Android.
I've been using it since 2015 on various versions of android
I use these Viper mods
https://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
These were super easy to install by just flashing the zip
But now on oreo these ZIPS won't flash
Makes my recovery go freeze
Stuck at copying files
I know I can get Viper4Android through magisk module on Oreo
But they they don't offer that bass and quality as compared to beats and sony edition. As they don't contain the driver files
Also the GUI is material design
So can anyone tell my how to get this version working on my MIDO.
SamP1298 said:
One of the best thing about an unlocked and rooted phone is Viper4Android.
I've been using it since 2015 on various versions of android
I use these Viper mods
https://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
These were super easy to install by just flashing the zip
But now on oreo these ZIPS won't flash
Makes my recovery go freeze
Stuck at copying files
I know I can get Viper4Android through magisk module on Oreo
But they they don't offer that bass and quality as compared to beats and sony edition. As they don't contain the driver files
Also the GUI is material design
So can anyone tell my how to get this version working on my MIDO.
Click to expand...
Click to collapse
You can use divine beats.
MyNameIsRage said:
You can use divine beats.
Click to expand...
Click to collapse
Never heard about it.
Is it better than Viper?
very good thank you
SamP1298 said:
Never heard about it.
Is it better than Viper?
Click to expand...
Click to collapse
I can't really compare it to viper, because it is a sound mod which combines multiples of sound mods in one. Like you get dolby atmos, viper, beats audio mod etc all in a single package. It's actually good.
https://forum.xda-developers.com/an...nebeats-sound-master-phone-sony-t3274355/amp/
Btw is this viper materialized or standard?
MyNameIsRage said:
I can't really compare it to viper, because it is a sound mod which combines multiples of sound mods in one. Like you get dolby atmos, viper, beats audio mod etc all in a single package. It's actually good.
https://forum.xda-developers.com/an...nebeats-sound-master-phone-sony-t3274355/amp/
Btw is this viper materialized or standard?
Click to expand...
Click to collapse
It's new version but
I prefer the old version with more value controls
SamP1298 said:
It's new version but
I prefer the old version with more value controls
Click to expand...
Click to collapse
You talking about this one?
I have been flashing Rise Magnum Opus everytime and so far i has been working flawlessly on any oreo rom i tried.
It installs Dolby Digital Plus and Viper last versions, along with the magisk model it needs to work.
Dear All,
I tried experimenting with various roms and didnt find a suitable sound mod that could impress me.
However my search ended after finding this ultimate Dolby Atmos port which is easy to flash on any custom Oreo based rom.
Instructions:
1) Flash Magisk v16
2) Download Audio Modification lib from Downloads in Magisk
3)Download and flash Ainur Mod in Magisk
4) Flash attached Dolby Atmos magisk module
Thats it ! Experience the change in overall sound..
Many thanks to this devloper...
https://forum.xda-developers.com/android/software/app-dolby-atmos-axon-7-oreo-port-t3740508
Enjoy Guys...
can you share link ainur mod?
Attached for magisk compatibility.
Dolby sounds keeps crashing.
Unable to open both dolby sounds and atoms
Thanks. Work like charms.
Doesn't seem to activate after reboot in magisk
What does it affect? Speaker or playback via headphones quality
Both. But do not believe yet, try it yourself...
keeps stopping.
suree_n said:
Both. But do not believe yet, try it yourself...
Click to expand...
Click to collapse
[email protected] said:
Click to expand...
Click to collapse
Suggest me moto g5s plus Dolby atmos
Those who are have problems of force closure of app (keeps stopping), flash Audio Modification Library on Magisk. Everything will work then.
Boot Loop
I have done exactly step-by-step guide pointed out, but after flashing Dolby from attachment, my phone is on Boot load consistently for half an hour now. Reboot it few times, any help ?
EDIT: I have just noticed I have Android 9. Hahahaha
Keeps Stopping
Is there an android pie version of this?
If you find any good sound mods for Poco F1 please do share here. Like the LG V30 mod or viper or Dolby mod or Sony Xz2 mod or anything. So far the only problem is with the sound
Actually Poco is going to provide Dolby in future update (With MIUI 10 update).As posted in changelog of future beta ROM of Poco F1 in MIUI global forum beta recruitment page.
hrishi420 said:
Actually Poco is going to provide Dolby in future update (With MIUI 10 update).As posted in changelog of future beta ROM of Poco F1 in MIUI global forum beta recruitment page.
Click to expand...
Click to collapse
Already people are using MIUI 10 in poco F1, but don't see anybody mentioning this.
Dolby and viper are a must for me to buy this phone.Can't live without them.
kapilathi said:
Already people are using MIUI 10 in poco F1, but don't see anybody mentioning this.
Click to expand...
Click to collapse
Are you talking about this link?
Use this https://play.google.com/store/apps/details?id=com.noozxoidelabs.eizo.rewirepro
Sent from my SM-A720F using XDA-Developers Legacy app
masdacheri said:
Use this https://play.google.com/store/apps/details?id=com.noozxoidelabs.eizo.rewirepro
Sent from my SM-A720F using XDA-Developers Legacy app
Click to expand...
Click to collapse
sweet it does work
Same here. So I try flash dolby for oreo and all of them make my phone bootlop, still wait for developer to fix this
Even in the Miui10 Beta there's no dolby atmos but they said they'll add it in Miui10 for Poco
Guess v4a,sauron,dirac audio mod library are safe to flash?
jaspad1710 said:
Guess v4a,sauron,dirac audio mod library are safe to flash?
Click to expand...
Click to collapse
Nobody tried it though. Waiting for someone to post a flashable good sound mod zip
Update:i flashed v4a, sauron ,audmod lib magisk modules (to make them work together). They're working. You need to tinker until the settings reach your needs, thats all
jaspad1710 said:
Update:i flashed v4a, sauron ,audmod lib magisk modules (to make them work together). They're working. You need to tinker until the settings reach your needs, thats all
Click to expand...
Click to collapse
Ok how exactly did u do that ....Pls tell us step by step....I'm newbie ...
3d360 said:
Ok how exactly did u do that ....Pls tell us step by step....I'm newbie ...
Click to expand...
Click to collapse
https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-unlock-bootloader-custom-t3839405
Go to this thread,and follow the instructions to root with magisk by flashing via recovery, then after rebooting go to magisk manager and go to downloads tab and search for modules required and click install, it's interactive,gollow the steps as directed.
For now viper4android is safe i guess
Because i installed other sound mods and faced bootloop,im not sure its because of those mods,but i wouldn't risk it as v4a suffices all our needs
Dolby atmos working for me on MIUI 10 (8.9.13) with Magisk v16.0
jaspad1710 said:
https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-unlock-bootloader-custom-t3839405
Go to this thread,and follow the instructions to root with magisk by flashing via recovery, then after rebooting go to magisk manager and go to downloads tab and search for modules required and click install, it's interactive,gollow the steps as directed.
For now viper4android is safe i guess
Because i installed other sound mods and faced bootloop,im not sure its because of those mods,but i wouldn't risk it as v4a suffices all our needs
Click to expand...
Click to collapse
You probably just need the Audio Modification Library module in Magisk
brunokutta said:
Dolby atmos working for me on MIUI 10 (8.9.13) with Magisk v16.0
Click to expand...
Click to collapse
Link please
Im on 10.1.3.0…
And both dolby and viper4android are working.. clear sound.. with a touch of surround sound experience.. the best
jaspad1710 said:
Guess v4a,sauron,dirac audio mod library are safe to flash?
Click to expand...
Click to collapse
I've flash Viper4x and it's perfectly working
rahulkamma14 said:
Nobody tried it though. Waiting for someone to post a flashable good sound mod zip
Click to expand...
Click to collapse
Just flash a sound mod on Magisk and actually, you can download and install a module V4A or Dolby and have no risks on bricking your phone