After I upgraded my HTC one m7 with cwm rom, my phone doesn't recognize my sim card. Haven tried almost everything I saw online
Related
hi every body
i bought a new htc desire so i gave my htc hero to my sister.
she is using a other sim with a other provider with the name simpel.
and now the device isnt working any more.
it stops at the boot ( htc quietly brilliant)
could someone help?
Hm i am not sure if i can help,but is the phone rooted?Has a custom ROM and/or a custom Radio?U tried to put back your old sim card to see if it is working?Else how long do you wait until it load?Lets it load for 15-20mins.
I've looked around for similar thread(s) but found nothing. I recently followed the instructions on this website-> "teambamf.net/index.php/topic/3528-guide-to-install-ics-ruu-and-firmware-windows/" and got the phone started up. Unfortunately since I'm not Verizon (T-mobile USA) I've been stuck at the "Activating" screen for hours now and it keeps saying "SIM card from unknown source". Any help to fix either (if not both of these problems) will be greatly appreciated.
P.S - tried rebooting several times and still stuck at the Activation screen after SIM from unknown source.
did you try to boot the phone up first without sim card? The phone by default is locked to cdma and you would have to manually change to gsm in order for it to work.
Try to boot up without SIM (and also any SD card. I had issue that my sd card has a rom in it and it won't let me to get any network data, so I had to erase the SD card and it work. So start without the sd card). Then setup the phone. Once it's setup, change the network to GSM and then shut down and put hte sim. See if this works.
I would suggest check out this thread: http://forum.xda-developers.com/showthread.php?t=1421341
also, is your sim already activated? I am not too sure if you can use rezound ot activate any sim. if it is not activate, try to activate with a diff phone first and then put in the rezound afterwards.
iHMDulton said:
I've looked around for similar thread(s) but found nothing. I recently followed the instructions on this website-> "teambamf.net/index.php/topic/3528-guide-to-install-ics-ruu-and-firmware-windows/" and got the phone started up. Unfortunately since I'm not Verizon (T-mobile USA) I've been stuck at the "Activating" screen for hours now and it keeps saying "SIM card from unknown source". Any help to fix either (if not both of these problems) will be greatly appreciated.
P.S - tried rebooting several times and still stuck at the Activation screen after SIM from unknown source.
Click to expand...
Click to collapse
get an app called App Disabler... it works great... just run the app and find the listing for verizons Setup Wizard... disable that app and you'll be good to go...
A bit of advice there are kit kat ROMs you should install one
help please
I have noticed that most people having this problem dont have verizon but have verizon phones. I have verizon but i just switched to verizon all new phones i have the note 3 and everything but i keep getting this message and dont know why or what to do.
apaul22713 said:
I have noticed that most people having this problem dont have verizon but have verizon phones. I have verizon but i just switched to verizon all new phones i have the note 3 and everything but i keep getting this message and dont know why or what to do.
Click to expand...
Click to collapse
If you have Verizon and a Verizon branded phone and are getting this message, you need to contact customer support.
hi I also have a htc rezound which presents me the same problem. I "ve tried everything but zero. Help me please. I just changed the rom to another rom-Business_ICS4.0.3_Sense3.6 fonctionnebien v6.3 and everything except the sim card side" This SIM card is year from unknown source " thank you.
omegadafrique225 said:
hi I also have a htc rezound which presents me the same problem. I "ve tried everything but zero. Help me please. I just changed the rom to another rom-Business_ICS4.0.3_Sense3.6 fonctionnebien v6.3 and everything except the sim card side" This SIM card is year from unknown source " thank you.
Click to expand...
Click to collapse
Have you tried this solution: http://forum.xda-developers.com/showthread.php?t=1882355
Otherwise, the Business Sense ROM is based on stock, and this will happen on all stock ROMs, but it should not effect actually using the device... It would be best to move to a CM or AOSP based ROM.
After troubleshooting the phone for bootloop problem,
I just successfully flashed the KingCobra3D-ICS-1.6.zip ROM in my HTC EVO 3D GSM S-ON phone.
When it rebooted, the sim card is not detected yet the phone fuctions the same the apps are working etc..
excpet for the sim card detection part (messages, phone, nothing there)
Also there are no language when it was reseted no English (Philippines) that's why I wondered..
The Sim Card is not broken or damaged, I tried inserting it on other phones and also it functions normally..
I tried inserting other sim card on the phone yet it still wont detect it. there are no problem in terms of placing it..
Also the location problem its stuck in US there are no philippine area
How can I resolve this problem by making this sim card be detected again? Thank you for the help
Here's the phone review again
Unlocked and S-ON phone
Hboot 1.53.0007
Android 4.0.3
HTC Sense 3.6
Software KingCobra3D-ICS v.6
Comments Withdrawn
zcink said:
Seems like an odd problem. I would just to reflash the rom. Its possible when you downloaded the rom it got corrupted also. Maybe redownload it and then reflash it. worth a try.
Click to expand...
Click to collapse
Yeah it was odd.. I reflashed it using 4ext its the same.. when I looked at the thread of KingCobra I browsed at the changelog
it says
1.6 - Jul 6
•New base: 3.28.631.1 (Official Rogers ICS RUU)
•Added CyanogenMod APN list
•Multilingual
•All Rogers bloatware removed
im GSM S-ON asia maybe I got problem there don't you think?
I'm browsing the problems yet I can't post at the thread of King Cobra..
I had it working the messaging ang phone settings!!
but the problem now is in the location setting now philippines =D
mewt0826 said:
I had it working the messaging ang phone settings!!
but the problem now is in the location setting now philippines =D
Click to expand...
Click to collapse
how did you work it?
mewt0826 said:
After troubleshooting the phone for bootloop problem,
I just successfully flashed the KingCobra3D-ICS-1.6.zip ROM in my HTC EVO 3D GSM S-ON phone.
When it rebooted, the sim card is not detected yet the phone fuctions the same the apps are working etc..
excpet for the sim card detection part (messages, phone, nothing there)
Also there are no language when it was reseted no English (Philippines) that's why I wondered..
The Sim Card is not broken or damaged, I tried inserting it on other phones and also it functions normally..
I tried inserting other sim card on the phone yet it still wont detect it. there are no problem in terms of placing it..
Also the location problem its stuck in US there are no philippine area
How can I resolve this problem by making this sim card be detected again? Thank you for the help
Here's the phone review again
Unlocked and S-ON phone
Hboot 1.53.0007
Android 4.0.3
HTC Sense 3.6
Software KingCobra3D-ICS v.6
Click to expand...
Click to collapse
Try to install another rom.
This is what happened! I had an old t-mobile Samsung phone that I wanted to unlock, since I moved back to my country i wanted to have it as a back up phone, so I used the Sim card from my HTC Amaze to do the unlocking. Well it didn't go as planed and when i returned my SIM card back to my HTC it said " NO SIM CARD IN PHONE". Then I used different SIM to see if it will do the same and the same message!!! I did factory reset and this problem is still persisting. Can anyone help me please!
Hi, today I wanted to root my gf's phone, I searched on google some tutorials and I find one very simple...with some app and flash recovery...but at the final i flashed from the phone memory not sd card.. and now the phone is restarting over and over again, it's showing only the HTC logo...after that I followed the new tutorial to unbrick with SP Flash tool but without result...can anyone help me out please.