Related
After 3 days tried to find out how to recovered or fix bootloop/brick ME170C, here is the way which was succeed for me.
1. Download latest firmware from ASUS website
the best way using complete firmware (containing stock rom) like this version UL-K017-WW-11.2.3.18.2-user, if succeed then later on you can continue with OTA system update
2. Rename the firmware file to K017_sdupdate.zip and put on SD card then Insert the SD card into a tablet. (Use good one SD card, Sandisk perfect I don't know others)
3. Download flashtools and USB driver at the bottom of this thread
4. Enter the DROIDBOOT, for this purpose on the tablet off push and hold button volume + and power then connect USB cable to tablet and PC.
5. Open your firmware archive and copy or drag & drop the boot.img, fastboot.img, splashscreen.img into Flashtools folder ( in computer )
6. go to flashtools folder and then push button shift and right click together and choose “Open command windows here”, to start open CMD on the right folder (in computer)
7. Test your device by typing fastboot devices on that cmd (in computer)
8. Enter the queue codes on CMD; (in computer)
fastboot erase cache
fastboot erase userdata
fastboot erase system
fastboot flash boot boot.img
fastboot flash fastboot fastboot.img
fastboot flash splashscreen splashscreen.img
fastboot reboot-bootloader
8. Disconnect the USB cable and select the SD update or Recovery.
9. Take your coffee and sit, walaaaaaaa I see you are smiling
I am curious , is it work for others ASUS tablet? do with your own risk, but btw with this step I did wake up a hard brick devices.
Tag [ Asus memopad fonepad zenfone ME170 brick, bootloop, stuck on asus logo, boot problem, solved brick, guide how to]
So awesome you figured this out! Glad it worked out for you and I'll be saving this in case I find myself in the same boat. Thank you for this!!
Sent from my Nexus 6
K01A, aka ASUS MeMO Pad ME170CX
Prod date 2014-10 IIRC.
I appreciate you taking time to create this thread, have been unable to flash stock firmware to the ME170CX using just the ME170CX itself. ASUS website just mentions a SOP method and when I insert SD that has had the firmware files which have been extracted (1) time to the SD card, the prompt that is supposed to "pop-up" on the taskbar as mentioned in the PDF's I found online about the SOP method does NOT occur.
(I have 2 ME170CX's about 30-days old running 4.4.2, firmware Version WW_V11.2.3.27 in which one of them all the sudden the camera app crashes 100% of the time, then gives a "No camera is found" error message.
Beyond a hardware issue no-one knows what causes this beyond (1) poster that mentioned he thought problem first occurred after hitting the "Home" button right after hitting the cam icon and the thought is the app gets confused by this and the app/firmware for the camera gets corrupted.
Reset via OS itself. Wiping data and choosing "Recovery" in DROIDBOOT with "FASTBOOT" text at bottom of screen didn't make any difference. Camera is dead, dead, dead.
Figured I'd re-flash with same Version WW_V11.2.3.27, if that doesn't work try Version WW_V11.2.3.28 before RMA'ing it back to ASUS so I appreciate you listing the steps, and also attaching the needed files.)
***************
Question about Step 2, Please clarify:
2. Extract (archive in archive) and throws to the SD card. Rename the file to K017_sdupdate.zip and Insert the flash drive into a tablet. (Use good one SD card)
Click to expand...
Click to collapse
To clarify you are saying to extract the firmware from the "zip" package of zip that matches the firmware specific to the device from ASUS, which itself contains a zip file named IFWI.ZIP (1 ), one time, then rename the file named IFWI.ZIP (which contains 4 Bin files) to K017_sdupdate.zip.
Upon extraction process completing and renaming the zip you then copy the contents over to a known good MiroSD of at least 2GB which is formatted FAT32 to the ROOT of the drive.
IE: You do not extract the zip within the archive, you're just renaming IFWI.ZIP to K017_sdupdate.zip?
OR are you saying to extract the BINS also?
If so do these go in the ROOT of the SD card?
Another question, is there a reason for renaming IFWI.zip to K017_sdupdate.zip?
.
WeAreNotAlone said:
K01A, aka ASUS MeMO Pad ME170CX
Prod date 2014-10 IIRC.
I appreciate you taking time to create this thread, have been unable to flash stock firmware to the ME170CX using just the ME170CX itself. ASUS website just mentions a SOP method and when I insert SD that has had the firmware files which have been extracted (1) time to the SD card, the prompt that is supposed to "pop-up" on the taskbar as mentioned in the PDF's I found online about the SOP method does NOT occur.
(I have 2 ME170CX's about 30-days old running 4.4.2, firmware Version WW_V11.2.3.27 in which one of them all the sudden the camera app crashes 100% of the time, then gives a "No camera is found" error message.
Beyond a hardware issue no-one knows what causes this beyond (1) poster that mentioned he thought problem first occurred after hitting the "Home" button right after hitting the cam icon and the thought is the app gets confused by this and the app/firmware for the camera gets corrupted.
Reset via OS itself. Wiping data and choosing "Recovery" in DROIDBOOT with "FASTBOOT" text at bottom of screen didn't make any difference. Camera is dead, dead, dead.
Figured I'd re-flash with same Version WW_V11.2.3.27, if that doesn't work try Version WW_V11.2.3.28 before RMA'ing it back to ASUS so I appreciate you listing the steps, and also attaching the needed files.)
***************
Question about Step 2, Please clarify:
To clarify you are saying to extract the firmware from the "zip" package of zip that matches the firmware specific to the device from ASUS, which itself contains a zip file named IFWI.ZIP (1 ), one time, then rename the file named IFWI.ZIP (which contains 4 Bin files) to K017_sdupdate.zip.
Upon extraction process completing and renaming the zip you then copy the contents over to a known good MiroSD of at least 2GB which is formatted FAT32 to the ROOT of the drive.
IE: You do not extract the zip within the archive, you're just renaming IFWI.ZIP to K017_sdupdate.zip?
OR are you saying to extract the BINS also?
If so do these go in the ROOT of the SD card?
Another question, is there a reason for renaming IFWI.zip to K017_sdupdate.zip?
.
Click to expand...
Click to collapse
some firmware when you download it from asus site ZIP compresed twice, you can rename it directly from WW_V11.2.3.28.zip to K017_sdupdate.zip, if your device is K01A try to renaming firmware to K01A_sdupdate.zip and then put in SD card (do not created any folder in SD card ). the key to success is the SD card compatibility with ASUS DROIDBOOT, I was using Sandisk SD card. I did format fat32 the SD card and insert in another android devices first and then put the renamed firmware file there.
inside firmware file there is boot.img, fastboot.img and splashscreen.img you need to extract it in flashtool/fasboot folder and then flashing it your tablet. this trick to make firmware recognize correct devices to be update.
try again.
sevensvr said:
some firmware when you download it from asus site ZIP compresed twice, you can rename it directly from WW_V11.2.3.28.zip to K017_sdupdate.zip, if your device is K01A try to renaming firmware to K01A_sdupdate.zip and then put in SD card (do not created any folder in SD card ). the key to success is the SD card compatibility with ASUS DROIDBOOT, I was using Sandisk SD card. I did format fat32 the SD card and insert in another android devices first and then put the renamed firmware file there.
inside firmware file there is boot.img, fastboot.img and splashscreen.img you need to extract it in flashtool/fasboot folder and then flashing it your tablet. this trick to make firmware recognize correct devices to be update.
try again.
Click to expand...
Click to collapse
RE: boot.img, fastboot.img and splashscreen.img you need to extract it in flashtool/fasboot folder ???????
Having some progress, renaming ifwi.zip which contains (4) bin files when Recovery was selected caused the robot with the Updating System Settings to appear, but a couple of seconds later it said ERROR with the robot laying on it's back, then it exits. Device reboots as normal.
To clarify:
WW_V11.2.3.28.zip download from ASUS was extracted with a Windows computer,
WW_V11.2.3.28.zip extracting /creating following folders, files, then the contents were copied to the ROOT of a MicroSD card formated Fat32
1: boot.img, fastboot.img and splashscreen.img (TO ROOT)
2: ifwi.zip to ROOT. (contains (4) bin files, is this supposed to be extracted to I assume folder by same name off root? OR does this ZIP file just get renamed?)
3: System folder
4: Recovery folder
5: META-INF folder
I do not see a flashtool/fasboot folder. (Fastboot, right?)
Q: Is boot.img, fastboot.img and splashscreen.img supposed to be in a folder named "Flashtool" OR are they supposed to be in folder named "Fastboot" with a pathway of Root (Drive) D:/Flashtool/fastboot ?
.
(NOTE ALL OF THIS IS BEING DONE ON THE DEVICE ITSELF, with contents on SD card.)
Still getting the ERROR! message wit the Adroid robot that is laying on his back.
The zip file that extracts from the main zip WW_V11.2.3.28.zip is named:
ifwi.zip...
I have left a copy of it in the ROOT, plus copied it and renamed it to
K01A_sdupdate.zip
K017_sdupdate.zip
LEAVING COPIES OF ALL IN THE ROOT OF THE SDCARD.
Q: If more than (1) zip is present does this confuse fastboot? OR does fastboot automatically look for zip zip which matches model ID of device? (K01A)
I have left copies of boot.img, fastboot.img and splashscreen.img in the ROOT of the drive.
AND
Created: (ROOT) flashtools/fastboot with *img files in it.
Created: (ROOT) fastboot with *img files in it.
Copied the *img files to under "Flashtools" folder in flashtools/fastboot.
Figuring all the bases would be covered. (EG: *img Files in ROOT, files in Flashtools, Flashtools/fastboot, and a folder named fastboot as well.
Q: I've noticed on the SD card files appearing that previously were not there, when the flash aborts is there some kind of file or files you need to delete, or is it ok to leave the newly generated files there?
---------- Post added at 03:43 AM ---------- Previous post was at 03:37 AM ----------
Deleted:
ifwi.zip.
K017_sdupdate.zip
Tried:
K01A_sdupdate.zip
Still getting robot on it's back with ERROR!
who said you need to renaming ifwi.zip, What you need is read all instruction carefully,
do not put more than 1 zip file in SD card only firmware file which is already renamed to K017_sdupdate.zip, and use good brand SD card.
I successfully complete all step after "Installing system update" nothing change again stuck on asus logo.
commando987 said:
I successfully complete all step after "Installing system update" nothing change again stuck on asus logo.
Click to expand...
Click to collapse
when installing update, the robot end with error or not?, the installing bar moved till finish ? the installing process will take 3 to 5 minutes.
if you did all above and still got stuck on asus logo, try to change the firmware with this version UL-K017-WW-11.2.3.18.2-user, if succeed then you can continue with OTA system update
My Asus MemoPad ME170C has risen again!
sevensvr said:
After 3 days tried to find out how to recovered or fix bootloop/brick ME170C, here is the way which was succeed for me.
1. Download latest firmware from ASUS website
2. Rename the firmware file to K017_sdupdate.zip and put on SD card then Insert the SD card into a tablet. (Use good one SD card, Sandisk perfect I don't know others)
3. Download flashtools and USB driver at the bottom of this thread
4. Enter the DROIDBOOT, for this purpose on the tablet off push and hold button volume + and power then connect USB cable to tablet and PC.
5. Open your firmware archive and copy or drag & drop the boot.img, fastboot.img, splashscreen.img into Flashtools folder ( in computer )
6. go to flashtools folder and then push button shift and right click together and choose “Open command windows here”, to start open CMD on the right folder (in computer)
7. Test your device by typing fastboot devices on that cmd (in computer)
8. Enter the queue codes on CMD; (in computer)
fastboot erase cache
fastboot erase userdata
fastboot erase system
fastboot flash boot boot.img
fastboot flash fastboot fastboot.img
fastboot flash splashscreen splashscreen.img
fastboot reboot-bootloader
8. Disconnect the USB cable and select the SD update or Recovery.
9. Take your coffee and sit, walaaaaaaa I see you are smiling
I am curious , is it work for others ASUS tablet? do with your own risk, but btw with this step I did wake up a hard brick devices.
Tag [ Asus memopad fonepad zenfone ME170 brick, bootloop, stuck on asus logo, boot problem, solved brick, guide how to]
Click to expand...
Click to collapse
I bought my memopad 170c just a couple of days ago and because of excitement i flash the wrong firmware and it went dead i tried the recovery method but nothing happens i'm beginning to get nervous as this tablet is a gift for my daughter but thankfully i found this site especially to your instruction did every step with my finger crossed and like what you said sit back and walaaaaa! my tablet err my daughter's tablet has risen again. thank you for sharing your knowledge.
sevensvr said:
when installing update, the robot end with error or not?, the installing bar moved till finish ? the installing process will take 3 to 5 minutes.
if you did all above and still got stuck on asus logo, try to change the firmware with this version UL-K017-WW-11.2.3.18.2-user, if succeed then you can continue with OTA system update
Click to expand...
Click to collapse
Installing bar not complete at the end but not give error and restart. After restart stuck on asus logo. Now i download version UL-K017-WW-11.2.3.18.2 and check it.
mapagmatyag said:
I bought my memopad 170c just a couple of days ago and because of excitement i flash the wrong firmware and it went dead i tried the recovery method but nothing happens i'm beginning to get nervous as this tablet is a gift for my daughter but thankfully i found this site especially to your instruction did every step with my finger crossed and like what you said sit back and walaaaaa! my tablet err my daughter's tablet has risen again. thank you for sharing your knowledge.
Click to expand...
Click to collapse
you welcome friend
commando987 said:
Installing bar not complete at the end but not give error and restart it. After restart stuck on asus logo. Now i download version UL-K017-WW-11.2.3.18.2 and check it.
Click to expand...
Click to collapse
it seems the tablet didn't read your SD card, to assure SD card problem when the robot appear while system update press buttom vol + and - rapidly to show installing status.
if the tablet didn't read ur SD card try to use another SD card
BIG Thanks
I've been stuck with the bricked 2 day old tablet for at least 3 months. Today I did the procedure you described and it worked. I had to install version V11.2.3.18.2 and then, once unbricked, apply latest version update.
Again, thanks a lot!.. Best regards.
mnabarro said:
I've been stuck with the bricked 2 day old tablet for at least 3 months. Today I did the procedure you described and it worked. I had to install version V11.2.3.18.2 and then, once unbricked, apply latest version update.
Again, thanks a lot!.. Best regards.
Click to expand...
Click to collapse
happy to heard it
Hi, am trying to fix my ME170CX because an original root attempt that failed and am getting a demo error message that won't go away.
I tried following all your instructions to fix this but it gets stuck "waiting for device" once I begin entering the commands.
I have tried multiple sd cards (including a sandisk) and both the V11.2.3.27 & V11.2.3.28 firmware versions to no avail.
I also tried naming the zip file K017 & K01A.
I am also wondering why we need to download the USB driver file? I don't see anywhere in your instructions on what to do with this.
Any help would be greatly appreciated.
Mike
mashton70 said:
Hi, am trying to fix my ME170CX because an original root attempt that failed and am getting a demo error message that won't go away.
I tried following all your instructions to fix this but it gets stuck "waiting for device" once I begin entering the commands.
I have tried multiple sd cards (including a sandisk) and both the V11.2.3.27 & V11.2.3.28 firmware versions to no avail.
I also tried naming the zip file K017 & K01A.
I am also wondering why we need to download the USB driver file? I don't see anywhere in your instructions on what to do with this.
Any help would be greatly appreciated.
Mike
Click to expand...
Click to collapse
Youll want to get your answer from him but i think i may be able to help. You need to install usb drivers so you can access abd and give commands to your tablet. Which i think is why it just says waiting for device... I could be wrong though....
Sent from my Nexus 6
anthonyg45157 said:
Youll want to get your answer from him but i think i may be able to help. You need to install usb drivers so you can access abd and give commands to your tablet. Which i think is why it just says waiting for device... I could be wrong though....
Sent from my Nexus 6
Click to expand...
Click to collapse
OK, I finally got the usb drivers working on my computer and made it through all commands which is much further than I was getting before.
I got to step 8 "Disconnect the USB cable and select the SD update or Recovery" and selected "Recovery" in DROIDBOOT (I don't have an "SD update" option there) and after like 1 second of "installing system updates" I get the android falling over guy error and then it hangs on the asus splash screen for ever.
download ME70CX for ME170CX
anthonyg45157 said:
Youll want to get your answer from him but i think i may be able to help. You need to install usb drivers so you can access abd and give commands to your tablet. Which i think is why it just says waiting for device... I could be wrong though....
Sent from my Nexus 6
Click to expand...
Click to collapse
have you been able to restore it ?
Can NOT use download of ME170C
Use download of ME70CX. Just did it, and tablet back to "almost" normal.
I have wifi button issue now. Button is stuck.
bye
ydobon.999 said:
have you been able to restore it ?
Can NOT use download of ME170C
Use download of ME70CX. Just did it, and tablet back to "almost" normal.
I have wifi button issue now. Button is stuck.
bye
Click to expand...
Click to collapse
That did it!
I used the firmware ME70CX and renamed the file "K01A_sdupdate.zip" and followed all of the other steps as per the original instructions and got my ME170CX working again but for one problem. . . I was still getting the "demo has stopped" error! So I proceeded to attempt root again, this time with RootZenFone-1.4.6r and and now it's working perfectly and rooted as well!
Many thanks to all!!
Hi Guys,
I'm hoping someone can help me here with unbricking my daughters Nabi 2 tablet.
The long story short is that I've tried to update to the latest OTA with TWRP 2.3.3.0 (Nabi 1.9.37) and gapps installed in the past (in order to have google play services).
After downloading the OTA and successfull file verification it booted into TWRP mode and this is when things went wrong...
As I wasn't sure about how to even leave the TWRP mode I have hit few things by accident (I think one of them asked me if I want to wipe my ROM and I said YES + when I was after that trying to reboot the tablet it gave me a warning saying something like "you have no OS installed - are you sure to reboot?).
Now, of course due to my stupid actions it doesn't work - stuck on Nabi boot logo and when I try to pres Volume+ and Power together it gives me the screen with 4 options to choose from (Boot Normally, Fastboot Protocol, Recovery Kernel, Forced Recovery) but I still can't select/move the highlighted item. All what I'm able to do now is to power it off by holding the power button pressed for couple seconds.
Based on your experience here - is there anything that can be done or is it a "real brick" and we need to buy something new for her?
Thank you for any suggestions.
Hi,
I managed to boot into TWRP somehow...
Could someone please direct me how I can re-flash it with a Nabi 2 UK OS (and where I can source the file from if possible at all)?
Cheers,
T1000
termostat1000 said:
Hi,
I managed to boot into TWRP somehow...
Could someone please direct me how I can re-flash it with a Nabi 2 UK OS (and where I can source the file from if possible at all)?
Cheers,
T1000
Click to expand...
Click to collapse
Try sections 9 and 10. http://forum.xda-developers.com/nabi-2/general/nabi-information-t3229119
Hi,
Using NabiLab I managed to load stock 1.9.37 through TWRP.
At the moment tablet will start, let me through the initial setup wizard and go into normal mode from when it was new (no Google services available).
When I try to install gapps (TWRP mode) using NabiLab it goes into endless boot loop showing just a splash screen of the screen lock and reloads again.
I tried also bringing it more to factory condition but it is not recognised in NabiLab when android is fully booted (even though PC can see it). I tried different drivers but without too much luck. When in TWRP mode it comes up as Alcatel ADB Device and when adroid is booted it comes up as a storage device rather than ADB.
I feel I'm pretty close but I need just a hint how to solve it finally without bricking it for real...
Cheers
T
termostat1000 said:
Hi,
Using NabiLab I managed to load stock 1.9.37 through TWRP.
At the moment tablet will start, let me through the initial setup wizard and go into normal mode from when it was new (no Google services available).
When I try to install gapps (TWRP mode) using NabiLab it goes into endless boot loop showing just a splash screen of the screen lock and reloads again.
I tried also bringing it more to factory condition but it is not recognised in NabiLab when android is fully booted (even though PC can see it). I tried different drivers but without too much luck. When in TWRP mode it comes up as Alcatel ADB Device and when adroid is booted it comes up as a storage device rather than ADB.
I feel I'm pretty close but I need just a hint how to solve it finally without bricking it for real...
Cheers
T
Click to expand...
Click to collapse
Pretty hard to brick a Nabi2.
Why did you choose 1.9.37? Isn't the latest 2.3.2 and already has Gapps?
When in Android do you have ADB turned on in Developer options?
Is this the procedure you used?
a) Download the ROM for your device in section 10
b) Boot to TWRP (see above for instructions)
c) Do a backup of just the boot partition in TWRP.
- Click Restore tab
- Just check "boot" and nothing else.
- Swipe to Backup
d) Eject the external SD from the tablet and place in the computer
- Note: You should unmount the card from the mount tab in TWRP before ejecting it. (Uncheck the box next to external SD)
e) Connect the SD card to you computer
f) On the SD card navigate to the folder TWRP/BACKUPS/XXXX. XXX is a serial number unique to your Nabi.
g) Make a new folder and call in whatever you want. So it should now look like TWRP/BACKUPS/XXX/yourfolder
h) Unzip the ROM file you downloaded in to the "yourfolder" you created above. The files should look like ext4.system.win, emmc.boot.win, ext.addon.win, etc. Inside the the "yourfolder" directory.
i) Download the bootloader zip for your device from section 10
j) Copy it to the external SD in a location you will remember. This will be for the bootloader update.
k) Eject the SD card from your computer (safely eject it)
l) Install SD card in Nabi
- After inserted in tablet go to TWRP mount tab and check the box to mount the SD card
m) Go to restore tab, and find the backup under the "yourfolder" you made and unzipped the files to.
n) You should be able to select boot, system, and addon and skip the others.
o) If everything restores then go to TWRP install tab, find the bootloader.zip you downloaded and install it.
p) Reboot
Code:
[U][B]Nabi2 Original United Kingdom (NABI-NV7A-UK)[/B][/U]
Version 2.3.2[URL="https://www.androidfilehost.com/?fid=24269982087011751"] Download[/URL]
ROM Mirror[URL="http://www.nabtabhacks.com/downloads/232UKstock.zip"] Download[/URL]
Bootloader [URL="https://www.androidfilehost.com/?fid=24269982087013995"] Download[/URL]
aicjofs said:
Pretty hard to brick a Nabi2.
Why did you choose 1.9.37? Isn't the latest 2.3.2 and already has Gapps?
When in Android do you have ADB turned on in Developer options?
Is this the procedure you used?
a) Download the ROM for your device in section 10
b) Boot to TWRP (see above for instructions)
c) Do a backup of just the boot partition in TWRP.
- Click Restore tab
- Just check "boot" and nothing else.
- Swipe to Backup
d) Eject the external SD from the tablet and place in the computer
- Note: You should unmount the card from the mount tab in TWRP before ejecting it. (Uncheck the box next to external SD)
e) Connect the SD card to you computer
f) On the SD card navigate to the folder TWRP/BACKUPS/XXXX. XXX is a serial number unique to your Nabi.
g) Make a new folder and call in whatever you want. So it should now look like TWRP/BACKUPS/XXX/yourfolder
h) Unzip the ROM file you downloaded in to the "yourfolder" you created above. The files should look like ext4.system.win, emmc.boot.win, ext.addon.win, etc. Inside the the "yourfolder" directory.
i) Download the bootloader zip for your device from section 10
j) Copy it to the external SD in a location you will remember. This will be for the bootloader update.
k) Eject the SD card from your computer (safely eject it)
l) Install SD card in Nabi
- After inserted in tablet go to TWRP mount tab and check the box to mount the SD card
m) Go to restore tab, and find the backup under the "yourfolder" you made and unzipped the files to.
n) You should be able to select boot, system, and addon and skip the others.
o) If everything restores then go to TWRP install tab, find the bootloader.zip you downloaded and install it.
p) Reboot
Code:
[U][B]Nabi2 Original United Kingdom (NABI-NV7A-UK)[/B][/U]
Version 2.3.2[URL="https://www.androidfilehost.com/?fid=24269982087011751"] Download[/URL]
ROM Mirror[URL="http://www.nabtabhacks.com/downloads/232UKstock.zip"] Download[/URL]
Bootloader [URL="https://www.androidfilehost.com/?fid=24269982087013995"] Download[/URL]
Click to expand...
Click to collapse
Hi aicjofs,
I followed the steps above except step c which I haven't done.
So it looked good with the NabiLab built in 1.9.37 and it seemed to load fine with my TWRP 2.3.3.0 but it was hgoing into this endless boot loop after trying to install gapps. BTW I went for 1.9.37 as it came with NabiLab and turned right.
After your reply I've donwloaded the 232UK stock rom and bootloader. Copied both onto SD card - at that stage it would let me do a restore directly from the SD card so I've copied the 232UK rom into internal memory. Restore process went OK and at the end I've installed its dedicated bootloader...
Right now the situation is that I can only boot into TWRP but restore doesn't show any available roms (both internal or external memory) even though there is backup folder on the SD card.
What worries me the most is when I go to advanced / file manager / sdcard (internal memory) in TWRP mode it doesn't show any files or folders there. When I try to dipslpay tablet information in NabiLab it shows the external SD card properties properly (capacity/free space) but on the internal memory it says "Size df:KB Free can'tKB used find".
Does it mean it has wiped all the internal memory down to zero? Would this be the reason for recovery no being able to identify the roms on external SD card too?
Looking at the log in TWRP mode it is filled with entries like
E:Unable to mount '/data'
E:Unable to mount '/cache'
E:Can't open /cache/recovery/last_install
E:Can't open (No such file or directory)
What a pain is this thing, honestly...
termostat1000 said:
Hi aicjofs,
I followed the steps above except step c which I haven't done.
So it looked good with the NabiLab built in 1.9.37 and it seemed to load fine with my TWRP 2.3.3.0 but it was hgoing into this endless boot loop after trying to install gapps. BTW I went for 1.9.37 as it came with NabiLab and turned right.
After your reply I've donwloaded the 232UK stock rom and bootloader. Copied both onto SD card - at that stage it would let me do a restore directly from the SD card so I've copied the 232UK rom into internal memory. Restore process went OK and at the end I've installed its dedicated bootloader...
Right now the situation is that I can only boot into TWRP but restore doesn't show any available roms (both internal or external memory) even though there is backup folder on the SD card.
What worries me the most is when I go to advanced / file manager / sdcard (internal memory) in TWRP mode it doesn't show any files or folders there. When I try to dipslpay tablet information in NabiLab it shows the external SD card properties properly (capacity/free space) but on the internal memory it says "Size df:KB Free can'tKB used find".
Does it mean it has wiped all the internal memory down to zero? Would this be the reason for recovery no being able to identify the roms on external SD card too?
Looking at the log in TWRP mode it is filled with entries like
E:Unable to mount '/data'
E:Unable to mount '/cache'
E:Can't open /cache/recovery/last_install
E:Can't open (No such file or directory)
What a pain is this thing, honestly...
Click to expand...
Click to collapse
My fault. I forgot to tell you once you update the bootloader you need to use TWRP for Jellybean, you are still using TWRP for Ice Cream Sandwich .
Code:
[B][U]Nabi2 Original (NABI-NV7A)[/U][/B]
Ice Cream Sandwich TWRP 2.6.3[URL="http://forum.xda-developers.com/attachment.php?attachmentid=2586828&d=1392743412"] Download[/URL]
Jellybean TWRP 2.8.5[URL="http://forum.xda-developers.com/attachment.php?attachmentid=3211498&d=1426404068"] Download[/URL]
KitKat TWRP 2.8.7[URL="http://forum.xda-developers.com/attachment.php?attachmentid=3473994&d=1442276115"] Download[/URL]
Discussion Thread [URL="http://forum.xda-developers.com/showthread.php?t=2074501"]Link[/URL]
At that point you can try to restore the 2.3.2 ROM again. Or try the 2.2 ROM http://forum.xda-developers.com/showpost.php?p=50341726&postcount=85
aicjofs said:
My fault. I forgot to tell you once you update the bootloader you need to use TWRP for Jellybean, you are still using TWRP for Ice Cream Sandwich .
Code:
[B][U]Nabi2 Original (NABI-NV7A)[/U][/B]
Ice Cream Sandwich TWRP 2.6.3[URL="http://forum.xda-developers.com/attachment.php?attachmentid=2586828&d=1392743412"] Download[/URL]
Jellybean TWRP 2.8.5[URL="http://forum.xda-developers.com/attachment.php?attachmentid=3211498&d=1426404068"] Download[/URL]
KitKat TWRP 2.8.7[URL="http://forum.xda-developers.com/attachment.php?attachmentid=3473994&d=1442276115"] Download[/URL]
Discussion Thread [URL="http://forum.xda-developers.com/showthread.php?t=2074501"]Link[/URL]
At that point you can try to restore the 2.3.2 ROM again. Or try the 2.2 ROM http://forum.xda-developers.com/showpost.php?p=50341726&postcount=85
Click to expand...
Click to collapse
Forgive me please but I'm not entirely sure how to load this TWRP 2.8.5 for JellyBean on it with TWRP 2.3.3.0 in place..
Cheers
termostat1000 said:
Forgive me please but I'm not entirely sure how to load this TWRP 2.8.5 for JellyBean on it with TWRP 2.3.3.0 in place..
Cheers
Click to expand...
Click to collapse
You will need to use fastboot to load it. If you have a nabilab folder it already has fastboot available. So using the procedure below you couldn't download the ZIP file I linked in post above. Extract the from the zip the recovery.img or twrp-recovery.img and put it in the nabilab folder. (Im puling the procedure from http://forum.xda-developers.com/nabi-2/general/nabi-information-t3229119 )
1) To load TWRP we will be in the fastboot operational mode(see section 3)
Device powered off:
-Depending on device press and hold the power and vol - keys OR power and vol + key. Some will boot straight to recovery, and others will come to the "bootloader" screen. We want the bootloader.
-To enter fastboot use vol+ and vol- to highlight and select fastboot protocol. (Device will need to be plugged in to computer and fastboot driver installed before the screen will change)
Device powered on:
-Use ADB and execute from the command line:
Code:
adb reboot-bootloader
2) USB plugged in and Fastboot/Bootoader Driver loaded(see section 4) verify with windows device manager if needed.
3) Download the TWRP zip file for your device from TWRP list below(see section 8)
4) Extract the file to the location your are running your command prompt(see section 6)
-The file will be called twrp-recovery.img or recovery.img
5) Depending on the name of the file in step 4, load TWRP by typing at the command prompt:
Code:
fastboot flash recovery recovery.img
or
Code:
fastboot flash recovery twrp-recovery.img
aicjofs said:
You will need to use fastboot to load it. If you have a nabilab folder it already has fastboot available. So using the procedure below you couldn't download the ZIP file I linked in post above. Extract the from the zip the recovery.img or twrp-recovery.img and put it in the nabilab folder. (Im puling the procedure from http://forum.xda-developers.com/nabi-2/general/nabi-information-t3229119 )
1) To load TWRP we will be in the fastboot operational mode(see section 3)
Device powered off:
-Depending on device press and hold the power and vol - keys OR power and vol + key. Some will boot straight to recovery, and others will come to the "bootloader" screen. We want the bootloader.
-To enter fastboot use vol+ and vol- to highlight and select fastboot protocol. (Device will need to be plugged in to computer and fastboot driver installed before the screen will change)
Device powered on:
-Use ADB and execute from the command line:
Code:
adb reboot-bootloader
2) USB plugged in and Fastboot/Bootoader Driver loaded(see section 4) verify with windows device manager if needed.
3) Download the TWRP zip file for your device from TWRP list below(see section 8)
4) Extract the file to the location your are running your command prompt(see section 6)
-The file will be called twrp-recovery.img or recovery.img
5) Depending on the name of the file in step 4, load TWRP by typing at the command prompt:
Code:
fastboot flash recovery recovery.img
or
Code:
fastboot flash recovery twrp-recovery.img
Click to expand...
Click to collapse
Hi,
Thank you very much for your help but it clearly looks that this is way beyond my knowledge on how to use all of these fastboot, command, adb and so on...
I regret I ever touched the thing at all.
So there is absolutely no easy way - command line is a must from where I am right now?
termostat1000 said:
Hi,
Thank you very much for your help but it clearly looks that this is way beyond my knowledge on how to use all of these fastboot, command, adb and so on...
I regret I ever touched the thing at all.
So there is absolutely no easy way - command line is a must from where I am right now?
Click to expand...
Click to collapse
Its not a must but easiest to try and walk you through. Which version of Nabilab are you using? You could move some files around and still use Nabilab. Up to you which way to go forward. I'll try and help.
aicjofs said:
Its not a must but easiest to try and walk you through. Which version of Nabilab are you using? You could move some files around and still use Nabilab. Up to you which way to go forward. I'll try and help.
Click to expand...
Click to collapse
Hi,
I'm not so much afraid of copy/paste for cmd... the biggest fear is that I don't know anything about ADB, fasboot etc. So when your instruction in previous post says use ADB and I purely don't know what it means.
I think if the option is there I'd like to ask if you could help with restoring it with Nabilab.
Thanks a million for your help!
T
termostat1000 said:
Hi,
I'm not so much afraid of copy/paste for cmd... the biggest fear is that I don't know anything about ADB, fasboot etc. So when your instruction in previous post says use ADB and I purely don't know what it means.
I think if the option is there I'd like to ask if you could help with restoring it with Nabilab.
Thanks a million for your help!
T
Click to expand...
Click to collapse
Which version of Nabilab are you using? Is it the commandline version. Black window, where you have to use keyboard to make selections?
aicjofs said:
Which version of Nabilab are you using? Is it the commandline version. Black window, where you have to use keyboard to make selections?
Click to expand...
Click to collapse
Hi,
I'm using Nabilab ver 2 - black windows with keyboard made selections.
termostat1000 said:
Hi,
I'm using Nabilab ver 2 - black windows with keyboard made selections.
Click to expand...
Click to collapse
Find the Nabilab folder on your computer. Open the "recovery" folder. Then open the "stock" folder. Inside it there is recovery.img file. Rename it to recoverystock.img.
You downloaded the twrp-recovery-JBNV7AUS.zip from a few posts back. Extract the twrp-recovery.img file and put it in the stock folder. Now rename the twrp-recovery.img file to recovery.img.
Now boot the tablet to TWRP recovery(the one that isn't working) and run Nabilab. Select 4 Install recoveries. Then 4 instal stock recovery. Then reboot in to recovery and see if you have the 2.8.5 recovery
aicjofs said:
Find the Nabilab folder on your computer. Open the "recovery" folder. Then open the "stock" folder. Inside it there is recovery.img file. Rename it to recoverystock.img.
You downloaded the twrp-recovery-JBNV7AUS.zip from a few posts back. Extract the twrp-recovery.img file and put it in the stock folder. Now rename the twrp-recovery.img file to recovery.img.
Now boot the tablet to TWRP recovery(the one that isn't working) and run Nabilab. Select 4 Install recoveries. Then 4 instal stock recovery. Then reboot in to recovery and see if you have the 2.8.5 recovery
Click to expand...
Click to collapse
Great!
Your trick worked fine and now I can see TWRP 2.8.5.0 and I have problems with drivers - keeps failing to recognize the tablet.
I'll work on the driver issue or is there something I should know about it with TWRP 2.8.5.0 lodaed?
What is my next step from here as Android is still stuck on Nabi logo (no motion) and I'm afraid to do anything in case I create even bigger mess than I already have
I also noticed when I try to shut it down from inside TWRP it asks me a question if I want to root the tablet (Install super SU) - is it something I should do and at what stage?
Thanks!
T
termostat1000 said:
Great!
Your trick worked fine and now I can see TWRP 2.8.5.0 and I have problems with drivers - keeps failing to recognize the tablet.
I'll work on the driver issue or is there something I should know about it with TWRP 2.8.5.0 lodaed?
What is my next step from here as Android is still stuck on Nabi logo (no motion) and I'm afraid to do anything in case I create even bigger mess than I already have
I also noticed when I try to shut it down from inside TWRP it asks me a question if I want to root the tablet (Install super SU) - is it something I should do and at what stage?
Thanks!
T
Click to expand...
Click to collapse
If you can see the files again now with the correct TWRP. You can try to restore the 2.3.2 ROM again. Or maybe try the procedure from post #5 with the 2.2 ROM I linked to in post #7. You don't have to do the bootloader install anymore so skip that step. Installing root doesn't matter, you can choose to install or not.
aicjofs said:
If you can see the files again now with the correct TWRP. You can try to restore the 2.3.2 ROM again. Or maybe try the procedure from post #5 with the 2.2 ROM I linked to in post #7. You don't have to do the bootloader install anymore so skip that step. Installing root doesn't matter, you can choose to install or not.
Click to expand...
Click to collapse
You're a STAR!
All happy working as new with 232UK ROM and bootloader loaded with your instructions.
I'd never get this sorted without your specialized help.
If I only could I'd send you something just to say Thank You...
T - Happy Dad of Amelia
termostat1000 said:
You're a STAR!
All happy working as new with 232UK ROM and bootloader loaded with your instructions.
I'd never get this sorted without your specialized help.
If I only could I'd send you something just to say Thank You...
T - Happy Dad of Amelia
Click to expand...
Click to collapse
Your thanks is enough Glad we got it sorted and a happy kid!
Alright, so I screwed up my watch a few days ago and it ended up not getting past the splash screen and going straight to recovery. Thanks to @z0mghii, I was able to get a TWRP backup of the system, boot, and data. I replaced this backup with my own so none of his data (if possible) could be taken advantage of. However, after flashing it, I was still unable to boot up. Here are the steps I took in order to get everything back to working order. Keep in mind this is for WREN, the small version. Some steps may be unnecessary.
1. Boot to TWRP
2. Go to advanced wipe
3. Wipe everything
4. Go to the link below and download the TWRP Backup
5. Create a backup of a small partition (like boot) on your watch to create the folder.
6. Plug watch into PC while in TWRP
7. Go to the watch's internal storage
8. Go to the TWRP folder
9. Go to the subfolder
10. Paste the downloaded backup folder into this folder, this should be with the one you created earlier
11. Restore this backup on your watch, be sure to check all the boxes
12. Reboot to the bootloader
13. Install ADB if you haven't already, I recommend the 15 second one
14. While the watch is in the bootloader and it is plugged in, type the following commands
fastboot erase cache
fastboot erase misc
fastboot reboot
https://drive.google.com/drive/folders/0B_HUnwYIrFskUW10UDZ0dXdHQzg (You might have to download each item and put them in a folder instead, unless I'm oblivious to something, sorry )
After this, your watch should boot up, then power back down, then boot back up again. This will be followed up by the boot animation and go to the welcome screen.
If any of you guys could provide me with the latest stock rom version TWRP backup or a stock recovery.img, it would be greatly appreciated. (Unless June patch is the latest). The recovery would be great no matter what. Getting the stock recovery can be done by typing the following commands into the command prompt on a PC. Hopefully they work. It should be copied onto the /sdcard.
Via adb shell (make sure ADB debugging is on in developer options, then type adb shell in CMD on PC) type: cat/proc/mtd and press enter
You will see which is recovery partition and then type: dd if=/dev/mtd/mtd1 of=/sdcard/recovery.img (note that mtd1 you must replace with number which is recovery partition)
I hope I helped somebody with this. Again, huge thanks to @z0mghii for making this possible. I'm sorry for bad formatting.
I'm really new to this. I'm also by no means a developer/hardcore android person. These commands were all taken from google. I take 0 responsibility for your device being ruined. This is just what worked for me.
Reserved
HOLY CRAP IT WORKED!! You just don't know how much this means to me, words can't express!
cland216 said:
HOLY CRAP IT WORKED!! You just don't know how much this means to me, words can't express!
Click to expand...
Click to collapse
Hell yeah. Glad I could help somebody! I've been wanting to give back to the wonderful XDA community for a while as a long time lurker. Also, I'm hoping to get a newer version of the stock rom and a stock recovery.img so you can go back to 100% factory stock for an OTA. I'm pretty proud of myself (being noobish) figuring this out.
Thanks a lot!! My watch was kept in a drawer because it was useless and it has now returned to life, I just have a problem restoring the recovery, the command to locate the recovery folder do not work me, have any idea how located the recovery folder?
klaudio_tv said:
Thanks a lot!! My watch was kept in a drawer because it was useless and it has now returned to life, I just have a problem restoring the recovery, the command to locate the recovery folder do not work me, have any idea how located the recovery folder?
Click to expand...
Click to collapse
Are you referring to "extracting" the recovery img? You only need to do it if you're running the stock recovery.
If so, I think I have screwed the command. Make sure you're in adb shell (in recovery on the watch) and then type "cat /proc/mtd" (with the space in front of cat) without the quotes in order to locate the recovery partition.
You will see which is recovery partition and then type: dd if=/dev/mtd/mtd1 of=/sdcard/recovery.img (note that mtd1 you must replace with number which is recovery partition)
Hopefully this works
Hi, my watch now works well, but I was not able to install updates, when I try to install updates from the watch, watch reboots and go to TWRP recovery. Anyone knows how install the updates?
klaudio_tv said:
Hi, my watch now works well, but I was not able to install updates, when I try to install updates from the watch, watch reboots and go to TWRP recovery. Anyone knows how install the updates?
Click to expand...
Click to collapse
Since the OP helped me, here's my chance to give back..
By no means do I know what hell I'm doing, but I know enough to be dangerous. If you're ready to live dangerously, follow these steps (which worked for me):
1. Go into TWRP on the watch and connect it usb to your computer. Using TWRP file manager, copy the update.zip from CACHE to sdcard\Download.
2. On the computer, browse to Zenwatch internal memory Downloads folder and copy the update.zip file to your computer.
3. Unzip the file on your computer using 7zip.
4. Navigate to \META-INF\com\google\android\ and look for updater-script.
5. Edit updater-script in Notepad++.
6. Delete the lines starting with getprop. This turned out to be lines 2 thru 5.
7. Delete the lines starting with apply_patch_check. This turned out to be lines 10 thru 176
8. Save changes to updater-script then in Windows Explorer highlight all of the files and folders that you unzipped, right-click them and click on 7zip --> Add to update.zip
9. Copy the new update.zip to the Zenwatch internal memory, Downloads folder, overwriting the original update.zip
10. Flash the update.zip file with TWRP.
11. Reboot TWRP to Bootloader.
12. On your computer, goto adb folder where you have fastboot files, and using command prompt type:
fastboot erase cache
fastboot erase misc
fastboot reboot
These steps worked as I was stuck on the June 1, 2016 Android security patch on my Wren Zenwatch. These steps helped me get to the September 1, 2016 security patch.
I managed to update my watch to the September 1 security patch using Cland216's method. But I am unable to update further using the method above. Does anyone have any info on how to update further? Or has any zip files to flash?
If we could get someone to upload the watches stock recovery that would solve all issues.....Why has noone done this for this model yet?
Sent from my OnePlus X using XDA Labs
I'm unable to create a backup file
5. Create a backup of a small partition (like boot) on your watch to create the folder.
6. Plug watch into PC while in TWRP
TWRP :
Could not mount /data
When I try to mount /data , I unable to /data
HOLY ****
Dude.. Let me just say...
YOU ARE THE ****ING ABSOLUTE BEST.
I am now going to make a backup, and save it to my computer, google drive, dropbox, icloud, and every other ****in place I can to make sure this never happens again. Thank you!!!!
Nicholas6706 said:
Alright, so I screwed up my watch a few days ago and it ended up not getting past the splash screen and going straight to recovery. Thanks to @z0mghii, I was able to get a TWRP backup of the system, boot, and data. I replaced this backup with my own so none of his data (if possible) could be taken advantage of. However, after flashing it, I was still unable to boot up. Here are the steps I took in order to get everything back to working order. Keep in mind this is for WREN, the small version. Some steps may be unnecessary.
1. Boot to TWRP
2. Go to advanced wipe
3. Wipe everything
4. Go to the link below and download the TWRP Backup
5. Create a backup of a small partition (like boot) on your watch to create the folder.
6. Plug watch into PC while in TWRP
7. Go to the watch's internal storage
8. Go to the TWRP folder
9. Go to the subfolder
10. Paste the downloaded backup folder into this folder, this should be with the one you created earlier
11. Restore this backup on your watch, be sure to check all the boxes
12. Reboot to the bootloader
13. Install ADB if you haven't already, I recommend the 15 second one
14. While the watch is in the bootloader and it is plugged in, type the following commands
fastboot erase cache
fastboot erase misc
fastboot reboot
https://drive.google.com/drive/folders/0B_HUnwYIrFskUW10UDZ0dXdHQzg (You might have to download each item and put them in a folder instead, unless I'm oblivious to something, sorry )
After this, your watch should boot up, then power back down, then boot back up again. This will be followed up by the boot animation and go to the welcome screen.
If any of you guys could provide me with the latest stock rom version TWRP backup or a stock recovery.img, it would be greatly appreciated. (Unless June patch is the latest). The recovery would be great no matter what. Getting the stock recovery can be done by typing the following commands into the command prompt on a PC. Hopefully they work. It should be copied onto the /sdcard.
Via adb shell (make sure ADB debugging is on in developer options, then type adb shell in CMD on PC) type: cat/proc/mtd and press enter
You will see which is recovery partition and then type: dd if=/dev/mtd/mtd1 of=/sdcard/recovery.img (note that mtd1 you must replace with number which is recovery partition)
I hope I helped somebody with this. Again, huge thanks to @z0mghii for making this possible. I'm sorry for bad formatting.
I'm really new to this. I'm also by no means a developer/hardcore android person. These commands were all taken from google. I take 0 responsibility for your device being ruined. This is just what worked for me.
Click to expand...
Click to collapse
I spoke just a bit too soon, now it is hanging on that animation with the 4 dots. Any suggestions?
NEVERMIND, I AM UP AND RUNNING!! WOOHOOOO
I tried to root my watch a while back and kind of gave up. Since then, I have installed both the stock recovery and system image found in this thread:
https://forum.xda-developers.com/zenwatch-2/general/m6e69n-twrp-backup-stock-boot-firmware-t3484961
Now, I keep getting the update to M6E69X and it goes through the normal process of updating, but then a picture of an Android with an exclamation point comes up. I'm almost positive that its similar to the issues of newer versions of Android on phones requiring complete stock systems to update. The only problem is, I have tried reflashing the backup in the link above about four times now and it still won't work.
Any help will be appreciated at all and I'm sorry if this has been answered before and I'm just blind.
About 4 down from your post, https://forum.xda-developers.com/zenwatch-2/help/m6e69x-stock-rom-t3564626
At the bottom of that thread is a zipped up TWRP backup. Get TWRP temporarily running on the watch and restore it from there.
Here are the brief steps I did.
1. Get ADB Minimal and Fastboot - plug your watch into the computer using the cord. Enable ADB debugging on the watch.
2. Get twrp-v3.0.0-0.jk-v3.recovery.img for the watch
3. Fastboot oem unlock (erases your /data partition)
4. fastboot boot twrp-v3.0.0-0.jk-v3.recovery.img
5. Make an initial backup of the watch. You'll need the file structure created.
5. TWRP should let you copy the files to/from the watch
6. Create a new folder and copy the files from the zip to a folder under the serial number folder below TWRP - I have folder called 2017-03-14--11-51-50_M6E69X
7. Restore that copied TWRP backup
Hope that helps.
Attached i will have a link to my google drive with programs and zip files for everyone to use will explain further.
Okay I have a few problems going... here is what I have and have tried and the issues I have been having... I have log files and such saved too should you need those.
Synthoms: LGK20 PLUS aka TP260
- I needed a Binary update for SU... (never did get that to work) Somehow afterwards my phone would only reboot into Twrp Recovery on boot loop.
-I installed an Update SU file ( also didn't work) then the phone started booting into only fastboot.... ( I had a brief issue of it not connecting on ADB but I hade to just end task adb in the task menu (Crtl Alt Del in case somebody has same problem) Afterwards connected no problem.
-I have wiped datas and cache and all sorts of instuctions to no avail.. lol
_phone now boot immediately to fastboot but I am able to get to twrp recovery just fine
Whats Weird:
-I can see the device on the computer get onto the sd card add files and zip files and the computer recognizes it n o problem at all... but LG MOBILE SUPPORT LGUP LG Bridge and LG Flash Tool.... all do not recognize my phone.
-But no matter where I partition anything and no matter what recovery img or zip file I install... it just only wants to open into fastboot.... I'm sure it is a very simple operation to fix... maybe one of you have a restore file can put on the SD with mine that have done me no good? Any help would be appreciated hardcore lol and I appreciate the learning experience a per i have learned a lot..
Heres what I have collected in my attempts
A: I have a Twrp.img and Recovery.img (not sure if they are a recovery or boot partition)
B: I have ADB it connects to my device fine and I can even flash onto the phone but seems to not be helping lol
C: : LG Bridge and LG UP do not see that my phone is connected (all my drivers are updated)
D: I have a stock KTZ file for my phone but I have no programs to flash it except adb (the others will not recognize my phone except ADB
E: I am very sure Xposed may have something to do with this... I downloaded an uninstaller and the zip file will not flash error 555 or something like that.
F: I'm very sure I need a Boot.img?? this I know little about but I have a program to build one if I can figure out how lol.
G: My recoveries did not work :0(
H: None of my SU zips seem to be working (is why I believe Xposed is behind it lol.
I: There are commands you can put into the terminal in TWRP recovery ( I can get there will explain further later) to disable Xposed but they say to create a folder name \data\data\....ect ect... There is no way that the TWRP recovery will let me create folders so I'm at a loss there.....
Chances are there was software on the phone that allows the LG software on the computer to see it.
I'm not seeing the Google drive link, but if you wiped the system & data partitions in TWRP, then you have no OS.
Don't know if TWRP can flash a KTZ file, most 3rd party ROMs are ZIP.
Is it Tmobile or MetroPCS?
I assume you have read Aletron9000's thread https://forum.xda-developers.com/android/help/lg-k20-plus-how-to-flash-original-rom-t3632850/page1
It seems like it has a download mode similar to Samsung phones when using Odin. I have a OnePlus and its straight forward, TWRP (in twrp plugging into pc will bring up the device in file mode so you can copy rom and gapps zip files) and once I got twrp on my mom's galaxy s4 it was same process with LineageOS 14.1 and the phone runs 10x better.
I wish I knew if you could flash the KTZ file in twrp, but I doubt it.. If you can uncompress it in 7zip or winrar, then zip it again that may work. But if your just trying to install a factory image (assuming that's what a KTZ is) the the directions in the link above should get you there. Then for root either flash supersu (apparently Chinese controlled if that matters) or maybe better magisk 16 from twrp (and the newest magisk manager apk from within the Android, should still pass safety check, and can install alot of modules that I previously used xposed for.
Only trust the magisk on xda-developers
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Sent from my A0001 using Tapatalk
TP260 SOFT BRICK: Recovery File?
I am on a TMOBILE phone... I"M sure that's exactly what my problem is... I did read that post and have LGUP (will also be in my drive link) BUT it does me no good because it will not show up on the program for me to flash anything to it...
If I could get somebody to send me a recovery file I would be able to put it into my SD card then load it up will solve my entire issue lol.
I did consider trying magicks honestly but I do not know enough about it to switch over like that... Once I get my phone back I will research into it and let you guys now how my adventure turns out. lol.... I'm a research first kind of person hahaha....
FILES
Soon I will type up instuctions for each KIT I put together. That way all the instructions will be able to be found in one place which will help out a lot of people looking for LG UP or Recovery.img or Twrp.img plus a lot of other stuff including SU zip file ect,,,
https://drive.google.com/open?id=10OXHQtyZBCap7PaqiGZEEErmo_th8xFp
The KTZ file would not upload but if You want I will send it no problem at all Just ask. I will be adding a couple other things on there too probably.
I believe my best bet would be to take that KTZ file (bugger wouldn't load onto my DRIVE account lol) but I thin I will take that and convert it to a zip file and maybe give that a shot... But when I flash something like that does it go under the BOOT or RECOVERY partition? I undertand what a partigtion is but I'm not sure of the difference between the BOOT and RECOVERY idea .... is recovery out ROM and BOOT our OS system?