Related
anyone willing to build up this post on what modules do work on the g3 without putting the phone into a boot loop? yesterday i got xposed alpha 3 installed and had the g3 tweakbox. tried to install a couple other modules that i had on my nexus 4 (kitkat) and that put my device in a boot loop.
here are the list i got:
gmail app attachment size
playstore changelog
wa/wa+ theme
xgpm
xinstaller
youtube background playback
on the nexus, when i installed xposed framework, i got a file that i could flash from twrp in case phone got into a boot loop (it disables the modules or the whole framework i think) but didn't get that on lollipop. anyone knows of a way to get rid of a boot loop other than a factory reset? (had to do that yesterday so asking for future reference).
is it a trial and error to find out if a module will boot loop the phone on lollipop? or is there some other method?
RockyAJ said:
anyone willing to build up this post on what modules do work on the g3 without putting the phone into a boot loop? yesterday i got xposed alpha 3 installed and had the g3 tweakbox. tried to install a couple other modules that i had on my nexus 4 (kitkat) and that put my device in a boot loop.
here are the list i got:
gmail app attachment size
playstore changelog
wa/wa+ theme
xgpm
xinstaller
youtube background playback
on the nexus, when i installed xposed framework, i got a file that i could flash from twrp in case phone got into a boot loop (it disables the modules or the whole framework i think) but didn't get that on lollipop. anyone knows of a way to get rid of a boot loop other than a factory reset? (had to do that yesterday so asking for future reference).
is it a trial and error to find out if a module will boot loop the phone on lollipop? or is there some other method?
Click to expand...
Click to collapse
Yes in twrp you can go into file manager and under apps delete the xposed app that is causing the bootloop wipe the caches and you should be good
Working Lollipop modules:
For the sake of good camera, I'm using stock based CloudyRom. So the results are for stock based ROMS. Will be updating the post after future tests
Working:
Obviously G3 Tweakbox
GravityBox (I have it for the volume button cursor control)
AppSettings (Surpisingly it works great. Just dong go below 540 for stock LG apps)
ChromePie
Greenify
Not Working:
klukiyan said:
For the sake of good camera, I'm using stock based CloudyRom. So the results are for stock based ROMS. Will be updating the post after future tests
Working:
Obviously G3 Tweakbox
GravityBox (I have it for the volume button cursor control)
AppSettings (Surpisingly it works great. Just dong go below 540 for stock LG apps)
ChromePie
Not Working:
Greenify (I don't need it, just know it doesnt work)
Click to expand...
Click to collapse
and here i thought gravitybox works only for nexus devices.hah.i ended up buying tweakbox. don't regret it though. greenify works flawlessly for me. am running stock rom that came with phone. didn't flash any custom ones. i use app ops instead of appsettings though i just looked that one up and has a few more options. also lucky patcher works fine
let's keep the lists coming
klukiyan said:
For the sake of good camera, I'm using stock based CloudyRom. So the results are for stock based ROMS. Will be updating the post after future tests
Working:
Obviously G3 Tweakbox
GravityBox (I have it for the volume button cursor control)
AppSettings (Surpisingly it works great. Just dong go below 540 for stock LG apps)
ChromePie
Not Working:
Greenify (I don't need it, just know it doesnt work)
Click to expand...
Click to collapse
what you mean sir greenify not working? i installed it then activated modules...then no bootloop..but for technicalities you found out why its not working.please explain..so that i will change to servicely
chacho_2me said:
what you mean sir greenify not working? i installed it then activated modules...then no bootloop..but for technicalities you found out why its not working.please explain..so that i will change to servicely
Click to expand...
Click to collapse
I mean the greenify as Xposed module. As the app it works perfect. Sorry for confusion.
klukiyan said:
I mean the greenify as Xposed module. As the app it works perfect. Sorry for confusion.
Click to expand...
Click to collapse
Greenify as a xposed module works perfectly for me on both latest Cloudy and CM
4ndroid99 said:
Greenify as a xposed module works perfectly for me on both latest Cloudy and CM
Click to expand...
Click to collapse
Thank you for the info. I saw it totally red here https://docs.google.com/spreadsheets/d/10vutBHBlPtEFtnqNQBuz-IzStlXNGbVS6K0BRpwz7n0/edit#gid=0, so was afraid to try.
klukiyan said:
Thank you for the info. I saw it totally red here https://docs.google.com/spreadsheets/d/10vutBHBlPtEFtnqNQBuz-IzStlXNGbVS6K0BRpwz7n0/edit#gid=0, so was afraid to try.
Click to expand...
Click to collapse
i can confirm it works fine for me too. module and app.
I personally use and can confirm they all work; Greenify, Amplify, Flat syle bar indicators , G3 Tweaksbox and Gravitybox without any issues.
Hello.
I just need to ask something. Is there any custom ROM based on stock LG firmware (Android 5.0) which allows you to use Xposed modules, but keeping all the functionality of QuickCircle case?
Ćwirek said:
Hello.
I just need to ask something. Is there any custom ROM based on stock LG firmware (Android 5.0) which allows you to use Xposed modules, but keeping all the functionality of QuickCircle case?
Click to expand...
Click to collapse
Not for now... To install Xposed Framework you have to delete/freeze Quickcircle... But, in beggining weather apk was also necessary to freeze... Not anymore. There are some mods to use xposed and weather. Probably, some day, circle case will also be available with xposed
Delgadovsky said:
Not for now... To install Xposed Framework you have to delete/freeze Quickcircle... But, in beggining weather apk was also necessary to freeze... Not anymore. There are some mods to use xposed and weather. Probably, some day, circle case will also be available with xposed
Click to expand...
Click to collapse
Can you elaborate on that? Earlier i got into a bootloop and had to factory reset phone and i lost the backup xposed made for weather and the clock thingie. A guy sent me the apks that the app created for him. Weather and clock, etc. You think it would be safe to just install the weather ones from within the phone(not flash from recovery) and make them system apps to have it working again? If not, can you advise please? Thanks
Sent from my LG-D855 using XDA Free mobile app
Please let me know if someday Xposed and QuickCircle case will work together without freezing anything in Titanium Backup
Ćwirek said:
Please let me know if someday Xposed and QuickCircle case will work together without freezing anything in Titanium Backup
Click to expand...
Click to collapse
as far as I know xposed new version (69) works.
vassagout said:
as far as I know xposed new version (69) works.
Click to expand...
Click to collapse
Yes it does. I'm using it on my D851 now.
Sent from my LG-D851 using Tapatalk
well, THE man himself said it:
So here it is, framework version 69 with support for LG's encrypted apps (LGCover, LGWeather, maybe more). Please make sure to clean your Dalvik cache after flashing the ZIP if you have an LG device and had issues with these apps.
Click to expand...
Click to collapse
good to know our device is still gettin' some love
i'm still on ver68 & attached is a list of my working modules. btw, do we still need the LP mem fix?
You mean that the version 69 could work with the quickCircle?
Hmm, I will backup and test it, it's very interesting...
Edit: Ok, I confirm that the 69 is ok with the QuickCircle and weather. That's great
(tested on Cloudy 2.5)
Envoyé de mon LG-D855 en utilisant Tapatalk
Deleted
Reserved
Reserved 2
The point of there being a thread is to gain suggestions, and improvements from the users.
Not for bug reports.
Its to further development ONLY
This rom seems awesome. Don't know if you already have done this but here's a little suggestion or a feature request. Lockscreen blur:
http://gerrit.aicp-rom.com/#/c/18133/
http://gerrit.aicp-rom.com/#/c/18130/
Do you think it would be possible to implement?
Arju007 said:
This rom seems awesome. Don't know if you already have done this but here's a little suggestion or a feature request. Lockscreen blur:
http://gerrit.aicp-rom.com/#/c/18133/
http://gerrit.aicp-rom.com/#/c/18130/
Do you think it would be possible to implement?
Click to expand...
Click to collapse
That's nice. When I sync up this week I will try to get that working.
Lock screen blur would be nice. Seeing as that's one of the few COS features I haven't implemented yet.
ZX64 said:
That's nice. When I sync up this week I will try to get that working.
Lock screen blur would be nice. Seeing as that's one of the few COS features I haven't implemented yet.
Click to expand...
Click to collapse
Awesome, thank you! I'm out of thanks today, will push the thanks button tomorrow
Arju007 said:
Awesome, thank you! I'm out of thanks today, will push the thanks button tomorrow
Click to expand...
Click to collapse
Well I appreciate the share. I've been looking for that and a fix for maxxaudio so it recognizes the source output correctly in cm13.
ZX64 said:
The Original UnityROM-4.
The point of this ROM is to build a smoother, more optimized version of CM, with as much COS flavor as possible.
Features:
CM13 pure source.
COS features (as many as possible)(Cortana, MaxxAudio, Snapdragon Browser, GalleryNext, Theme Chooser/Store, and TrueCaller)
Fully Odexed.
Full OTA.
UberTC compilation. (Thanks to @varund7726)
Signal hack (thanks to @Sultanxda)
OTA updating (thanks to @Sultanxda)
Revamped kernel (thanks to @Captain_Throwback & @varund7726)
AdAway 3.1.
Kernel Auditor.
OppoCam & plugins.
Minimal Gapps.
Increased WiFi scan interval (saves battery)
SELinux status set to permissive.
Note:
I am not very skilled. I just used a guide or two to get this building. And the help of quite a few others to bring the ROM where it is.
This is a Full OTA ROM. No gapps needed.
DO NOT REPORT BUGS.
This is based off of CM sources, which is not anywhere near "stable" yet.
If you have a fix, or constructive suggestion. Provide all details in a PM.
ROM Link: (4.12-V7) https://www.androidfilehost.com/?fid=24352994023706706
Source Link: https://github.com/LiquidSmokeX64/android
Kernel Source: https://github.com/LiquidSmokeX64/android_kernel_one plus_msm8974
Click to expand...
Click to collapse
Nice to go on . Wellcome back!
Sorry about the derp. I accidentally made calendar remove itself lol.
Will be fixed next release
ZX64 said:
That's nice. When I sync up this week I will try to get that working.
Lock screen blur would be nice. Seeing as that's one of the few COS features I haven't implemented yet.
Click to expand...
Click to collapse
Discovered I can't use that because it requires the Aicp_extras repo and I don't really support use of any non cm repos besides UBERTC toolchains of course
So, some time in the last two days somewhere between v4 - v7 my status bar stopped working with quick pulldown and notifications seem to not be appearing for background apps.
Edit: wiped system and reflashed, issue has been resolved
4.13 is up. Derp fixed, updated the firmwares. The assert check may fail. If so, follow the steps to installing Sultanxda's cm13 ROM. Twrp 2.8.7.0 doesn't write firmwares correctly, and 2.8.6.0 is needed. And is in the ROM.zip just in case.
4.13.1 posted. Few more fixes. LaunchAnyApp Mod integrated.
Gapps reworked. No more integrated Google search app. Mostly because it messes with the lock screen shortcuts.
SetupWizard might crash. But its nothing to worry about. I'll try to get that fixed next update
Edit.
Reuploaded an alternate 4.13.1. Now It's as close to an Unofficial CyanogenOS 13 as I can get it. With the normal UR4 stuff of course. Enjoy.
Also all Google Apps are intact as of now.
can i flash it with twrp 2.8.10 bro? using clean flash ?
rendiipratama said:
can i flash it with twrp 2.8.10 bro? using clean flash ?
Click to expand...
Click to collapse
wouldn't do that. Didn't install completely, system launched but no gapps availabe. Couldn't boot anymore in recovery. Had to install twrp 2.8.6.0 manually via laptop and fastboot. Rebooted into recovery (this time 2.8.6.0), installed the rom without errors, rebooted and google play services is just crashing permanently... Originally came from a fully working (ok two random reboots per day) from unity 4.10..... I really hate marshmallow, seems like no one can feature a working, stable and battery friendly rom. You update your rom, you get ****ed (seems like it will be my fourth clean install in marshmallow)...
solidsnew said:
wouldn't do that. Didn't install completely, system launched but no gapps availabe. Couldn't boot anymore in recovery. Had to install twrp 2.8.6.0 manually via laptop and fastboot. Rebooted into recovery (this time 2.8.6.0), installed the rom without errors, rebooted and google play services is just crashing permanently... Originally came from a fully working (ok two random reboots per day) from unity 4.10..... I really hate marshmallow, seems like no one can feature a working, stable and battery friendly rom. You update your rom, you get ****ed (seems like it will be my fourth clean install in marshmallow)...
Click to expand...
Click to collapse
so, i must bring twrp to 2.8.6.0, flash it via pc? ok, i'll do it. thx @solidsnew
rendiipratama said:
so, i must bring twrp to 2.8.6.0, flash it via pc? ok, i'll do it. thx @solidsnew
Click to expand...
Click to collapse
seems like that. But OP states it will install automatically... Just install twrp 2.8.6.0 via laptop and you should be safe.... And I do a clean install since I only get "setup assistant crashed" over and over and over.... I HATE IT!
solidsnew said:
seems like that. But OP states it will install automatically... Just install twrp 2.8.6.0 via laptop and you should be safe.... And I do a clean install since I only get "setup assistant crashed" over and over and over.... I HATE IT!
Click to expand...
Click to collapse
in xda share oneplus toolkit, and the toolkit when i running instal Costom recovery will instal twrp 2.8.6.0. too, can work with that software, i'm sorry my english so bad my bro
I state setup wizard crashes. It's because of the LaunchAnyApp gestures.
I contacted the creator for a fix. Calm down. It's nothing to worry about
this installs it as your stock rom
https://www.youtube.com/watch?v=vjxIrsfT2Lo&feature=youtu.be
The Odin file you say is 80MB, the file you uploaded to AndroidHost is only 40MB, is this correct?
Edit: never mind, saw that it was compressed
stoph8n24 said:
The Odin file you say is 80MB, the file you uploaded to AndroidHost is only 40MB, is this correct?
Edit: never mind, saw that it was compressed
Click to expand...
Click to collapse
Did you succeed? First impressions?
mikronex said:
Did you succeed? First impressions?
Click to expand...
Click to collapse
So far so good, xposed is included arter97, very lively and can install adblockers and uninstall bloatware. No reboots but it's been only 24 hours, worth the go.
email won't work well
when using Hotmail account reply a email , always stopped, anyone have same problem?
Did not flash odin file and worked fine without it.
Just rooted my note 3 using that new method of Yemen now how I flash the jasmine 6.1 just by using flashfire?
Maniatico2016 said:
Just rooted my note 3 using that new method of Yemen now how I flash the jasmine 6.1 just by using flashfire?
Click to expand...
Click to collapse
First of all, you need a SuperSu in order to use FlashFire. Next step, installation Instructions:
http://forum.xda-developers.com/showpost.php?p=62769340&postcount=11940
I installed Jasmine 6.1 with MultiSystem, and it's pretty fast, I like it....
xXArisXx said:
I installed Jasmine 6.1 with MultiSystem, and it's pretty fast, I like it....
Click to expand...
Click to collapse
Got a question. With jasmine ROM is kernel tweaking available? Guessing the locked BL would prevent this.
Does anyone know how to uninstall and install xposed again. Wanna use Snapchat but gonna need to uninstall xposed
ExpialZLD said:
Does anyone know how to uninstall and install xposed again. Wanna use Snapchat but gonna need to uninstall xposed
Click to expand...
Click to collapse
same problem happened to me, dont try to uninstall xposed while will sofft brick the phone, i had to go back to lollipop and make a titanium backup of snapchat then reinstall jasmine rom then restored snapchat
Everything works? lol yep
Sent from my SM-N900V using Tapatalk
why couldn't you use snapchat with Jasmine? Thinking of installing jasmine, but not if there is an issue with that app.
Install Jasmine, go here http://forum.xda-developers.com/showpost.php?p=60857320&postcount=1 flash the uninstaller, install and login to Snapchat, then flash the appropriate arter97 for your chipset, and you're all set.
stoph8n24 said:
Install Jasmine, go here http://forum.xda-developers.com/showpost.php?p=60857320&postcount=1 flash the uninstaller, install and login to Snapchat, then flash the appropriate arter97 for your chipset, and you're all set.
Click to expand...
Click to collapse
i've bricked a few times before... but i really want snapchat... there is only one uninstall... but which one should I use for the note 3 for verizon. In the jasmine rom I'm using now xposed installer says Im on framework version 71 custom by arter97. (thinking v71 snapdragon)
cyberoptics said:
why couldn't you use snapchat with Jasmine? Thinking of installing jasmine, but not if there is an issue with that app.
Click to expand...
Click to collapse
Snapchat does a security check for xposed framework upon sign in(and only at sign in).
if you want snapchat to work, you will need to sign into the app before installing the xposed framework. and if you ever log out of snapchat, you will need to uninstall xposed framework, sign in, and reinstall.
its not really an issue its a security measure taken by the devs of snapchat to further secure their app. it only checks for xposed since there is a module that exploits a few features on snapchat. however its security check only runs when you sign in. so once you're signed- in your in the clear. Just dont sign out or its a pain waiting for xposed to uninstall and reinstall. Hope that helps!
(only install xposed on Jasmine roms that support it, installing Xposed on a Stock rooted lollipop rom will cause bootloop)
cyberoptics said:
i've bricked a few times before... but i really want snapchat... there is only one uninstall... but which one should I use for the note 3 for verizon. In the jasmine rom I'm using now xposed installer says Im on framework version 71 custom by arter97. (thinking v71 snapdragon)
Click to expand...
Click to collapse
Correct!
Excellent tutorial! This should be posted in the Jasmin ROM thread too, which at least I will post the link over there. I think this will save many headaches to say the least.
yep. tks you. I like jamine rom :good:
Running lineage os 14.1 latest nightly (always). Every time I turn on usb debugging, just exiting the settings and entering again shows it disabled.
Running titanium backup asks for it to be enabled but it keeps turning off.
Any help will be appreciated.
Thanks.
muradulislam said:
Running lineage os 14.1 latest nightly (always). Every time I turn on usb debugging, just exiting the settings and entering again shows it disabled.
Running titanium backup asks for it to be enabled but it keeps turning off.
Any help will be appreciated.
Thanks.
Click to expand...
Click to collapse
Try magisk su instead. I have usb debugging disabled & TB works just fine. Anyway, I'm using RR rom.
mauam said:
Try magisk su instead. I have usb debugging disabled & TB works just fine. Anyway, I'm using RR rom.
Click to expand...
Click to collapse
Have been thinking of using RR but the backup is the problem. Let's see.
Can you pass safetynet using RR and Magisk?
By the way, how fast is RR. With so many customization options, does it lag or not?
muradulislam said:
Have been thinking of using RR but the backup is the problem. Let's see.
Can you pass safetynet using RR and Magisk?
By the way, how fast is RR. With so many customization options, does it lag or not?
Click to expand...
Click to collapse
I don't need safetynet so...But I'm pretty sure you'll find how to bypass it in Magisk forum. For me RR is fast as all other roms that I tried (with or without a lot of customization) & no lag at all. The better is, when you have some free time, make a backup of your current rom & try RR, so you can take you own conclusions. BTW, battery (SOT) is great too
mauam said:
I don't need safetynet so...But I'm pretty sure you'll find how to bypass it in Magisk forum. For me RR is fast as all other roms that I tried (with or without a lot of customization) & no lag at all. The better is, when you have some free time, make a backup of your current rom & try RR, so you can take you own conclusions. BTW, battery (SOT) is great too
Click to expand...
Click to collapse
Already tried it before your post. Seems a lot better than others. Can not pass safetynet and I guess updating will be a bit of hassle but am sticking with it for now.
muradulislam said:
Already tried it before your post. Seems a lot better than others. Can not pass safetynet and I guess updating will be a bit of hassle but am sticking with it for now.
Click to expand...
Click to collapse
Did you search in magisk forum!? Try HotDog kernel & see if you can pass it.
mauam said:
Did you search in magisk forum!? Try HotDog kernel & see if you can pass it.
Click to expand...
Click to collapse
Wanted it for Pokemon Go but am not such a huge fan that I have to have it. I can live without it for now.
It's a very small tradeoff when I look at customization, battery and ram management etc.
muradulislam said:
Wanted it for Pokemon Go but am not such a huge fan that I have to have it. I can live without it for now.
It's a very small tradeoff when I look at customization, battery and ram management etc.
Click to expand...
Click to collapse
Don't want to see you unhappy. Didn't tried with pokemon but this should work. Go to magisk, check magisk hide, then choose the app that you want to hide. See the pics attached.
mauam said:
Don't want to see you unhappy. Didn't tried with pokemon but this should work. Go to magisk, check magisk hide, then choose the app that you want to hide. See the pics attached.
Click to expand...
Click to collapse
@muradulislam Have you tried ? Does Pokemon work ? What ROM are you in now so Pokemon works charm ! Else are you back to Stock with Magisk ? Else any Custom ROM like Lineage 14.0 or RR RR 7.1.X Official / RR 6.0.1 Unofficial
kartrikpal said:
@muradulislam Have you tried ? Does Pokemon work ? What ROM are you in now so Pokemon works charm ! Else are you back to Stock with Magisk ? Else any Custom ROM like Lineage 14.0 or RR RR 7.1.X Official / RR 6.0.1 Unofficial
Click to expand...
Click to collapse
Lineage latest with built-in root and an app iSu from XDA labs. Passing safety net like a pro
iSu lets you automate hiding the root. Hides and un-hides automatically when you run and quit the game.
Using magisk hide somehow made me loose my root on RR official. Did not try it again and went back to lineage.
muradulislam said:
Lineage latest with built-in root and an app iSu from XDA labs. Passing safety net like a pro
iSu lets you automate hiding the root. Hides and un-hides automatically when you run and quit the game.
Using magisk hide somehow made me loose my root on RR official. Did not try it again and went back to lineage.
Click to expand...
Click to collapse
But iSu from XDA need kernel ! Did you use Magisk on Lineage or stuck with XPosed ?
kartrikpal said:
But iSu from XDA need kernel ! Did you use Magisk on Lineage or stuck with XPosed ?
Click to expand...
Click to collapse
You don't need to flash a custom kernel. It just works on the lineage kernel.
Hi everyone.
I am (like a few I assume) still on marshmallow for xposed. So I was curious, are there any active developments in custom MM roms? And if not, which Rom is good even with current issues/abondoned? I was hoping to using fluenceuhd but cannot he the patch or Rom zip and was curious about trying cyanogen. Any ideas or feedback would be greatly appreciated.
If anyone could recommend a Rom that could replace the xposed modules I use then I might consider updating to N. The key xposed modules are:
Rootclock
Amplify
Bootmanager
Lucky patcher
G4 toolbox
Gravitybox
Youtube adaway
Youtube background playback
Greenify
Enhanced and burnt toast
No overlay warning
Thanks
megatron_lives said:
Hi everyone.
I am (like a few I assume) still on marshmallow for xposed. So I was curious, are there any active developments in custom MM roms? And if not, which Rom is good even with current issues/abondoned? I was hoping to using fluenceuhd but cannot he the patch or Rom zip and was curious about trying cyanogen. Any ideas or feedback would be greatly appreciated.
If anyone could recommend a Rom that could replace the xposed modules I use then I might consider updating to N. The key xposed modules are:
Rootclock
Amplify
Bootmanager
Lucky patcher
G4 toolbox
Gravitybox
Youtube adaway
Youtube background playback
Greenify
Enhanced and burnt toast
No overlay warning
Thanks
Click to expand...
Click to collapse
Id say Res rom best for nogut. Most customizable. But that situation is up in the air because developer no longer working on it. But there's others trying. I do miss xposed too, wish it was on nogut already. Youtube is so annoying with all the adds.
Nick216ohio said:
Id say Res rom best for nogut. Most customizable. But that situation is up in the air because developer no longer working on it. But there's others trying. I do miss xposed too, wish it was on nogut already. Youtube is so annoying with all the adds.
Click to expand...
Click to collapse
Cool thanks for the advice, ill check it out
I was in the same problem some time ago, but i finally went to nougat.
Fulmics rom works great, lucky patcher works in the same way that it does with Xposed.
I've replaced YouTube background play with yMusic(try OGYoutube, its also very good)
So, almost all the Xposed modules that you're using are can be replaced: almost but GravityBox.
Anyway, the rom have some mods that can do some of the things that GravityBox does...
To finish, i think you should move to nougat.
Hi Skrb, thanks for the reply, that is exactly the sort of review I needed.
I am not desperate to move to Nougat, just getting bored of not having much to do with MM; but I shall certainly consider the upgrade.
The only thing I am uncertain about is the possibility of downgrading from N to MM> I understand that to do so you need to also downgrade recovery/boot? Anyway, I'll look into it - just so I have a safe way of returning to my TWRP MM Nandroid
I dont know, but i think that for downgrade you will have to flash the boot.img from a PC... But i cannot guarantee that
You only have to flash mm boot.zip and mm modem.zip via twrp from autoprime
Then you can restore TwrpBackup
And also flash N boot.zip and N modem.zip before flashing Fulmics Rom
http://downloads.codefi.re/autoprime/LG/LG_G5/H850
I've just switched back to MM from nougat purely for xposed! Also seem to be getting better battery life too even though it was great on nougat, seems to be even better on MM. Although it might be just me imagining it.