Current situation:
I have a LG G5 H850 VDF that had been unlocked official BL, and also flashed the TWRP Rec and rooted.
when I power up my H850, there is a tip on the screen , which contain a exclamation mark with yellow or red background.
I flash the kdz file in download mode via LG UP, it always stay at 9% each time, and shows a error:
Error: Error Code = 0x81000304, CBasicFlash::_func_LoadGptF...-Error Code:8224
Click to expand...
Click to collapse
(drivers and dlls have been installed. )
in that case, I have nothing to do except update system via twrp zip firmware, but I want solve this problem.
if anyone know the solution of this problem, please help me. Thanks.[/SIZE][/SIZE]
Related
Hi guys! I've a problem with that phone...
I was in the security error, and when loaded the firmware with the S / W Download I remained standing at 50%.
Then install u-boot, boot and recovery from fastboot.
The problem is i install the partitions from wrong model. I put the P769. Now I have black screen. My model is P760.
I have extracted from the KDZ firmware the partitions of a P760 firmware but still with black screen.
Someone can lend a hand?
Hi guys !
I'm currently trying to unbrick my F600L in bootloop since I tried to downgrade from 20q update.
I founded out later that the V10 has anti rollback feature but it was too late.
Now i'm looking for a kdz or anything flashable to restore my system...
By the way I always get a " invalid command response" error with LGUP while flashing "system" do someone know how to fix it ?
I tried to reset it with LG Bridge but il always fails because the detected software version is the 20q which is the latest... Is there a way to force the restore or update with LG Bridge ?
I tried recovery error fix too but it doesn't find any error...
software update (korean version) stuck at 21%
I have the same problem here. I tried to get back to LL Firmware F600L20n while my phone was on Firmware F600L20q. I used LGUP but it always got stuck at 21% percent on PC and 13 % on LG V10 F600L. And it also showed error codes 0x2000 invallid command. Please help.
cheansayon said:
I have the same problem here. I tried to get back to LL Firmware F600L20n while my phone was on Firmware F600L20q. I used LGUP but it always got stuck at 21% percent on PC and 13 % on LG V10 F600L. And it also showed error codes 0x2000 invallid command. Please help.
Click to expand...
Click to collapse
How did you unlock the bootloader?
Hi everyone..
I am trying to flash my lg g4 (h815) with lg flash tool 2014 but it gives "contact system administrator" error.i tried flashing it on lg up tool but give some error..i have also tried flashing it on lg flash tool 1.8 but all waste.
I also tried updating it from software update..the update is available but when i try to install it.it just reboot and the update screen appears and after a few seconds the dead andriod appears and displays error...how to flash my lg g4..
Anyone please help me: :crying:
jalalnature said:
Hi everyone..
I am trying to flash my lg g4 (h815) with lg flash tool 2014 but it gives "contact system administrator" error.i tried flashing it on lg up tool but give some error..i have also tried flashing it on lg flash tool 1.8 but all waste.
I also tried updating it from software update..the update is available but when i try to install it.it just reboot and the update screen appears and after a few seconds the dead andriod appears and displays error...how to flash my lg g4..
Anyone please help me: :crying:
Click to expand...
Click to collapse
check if bootloader is locked, if so, then unlock it and try to flash again
intel_wise said:
check if bootloader is locked, if so, then unlock it and try to flash again
Click to expand...
Click to collapse
How to unlock bootloader?
Do i have to root my phone?
please, see this post, let me know if helped
http://www.reviversoft.com/answers/...lem-with-the-firmware-update-and-verification
Can someone tlel me what is the secret ingredient requird to run LG flash Tool. I have converted mt kdz file, I have installed LG UP and the LG G5 DLL files, set port to use com41 but when I open LG Flash Tool I select manual mode then I select my dll and the converted dz file - then I click the yellow arrow and I get a message:
(S) Failed to load
What is the point in providing such pointless error messages that tell the user absolutely nothing about the problem.
If anyone can help I would be grateful.
Thanks.
Did you try to open LG UP using Uppercut? https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
Actually I got LG Flash Tool to work, but only v1.8.1203 worked - previous and newer versions all gave the error reported in my original post. Managed to flash the stock ROM as required.
Thanks.
Greetings all, I have come to ask for advice on how to debrick my lg v60 version V600TM20n. First, how I ended up in this situation.
To begin, I followed this guide to unlock bootloader and root my phone then I followed this guide in an attempt to install a custom rom however, i did not get too far.
I tried to remove vbmeta verity as per the requirements of the form and in doing so input this line into my bootloader fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img with the file provided by this form I think this is where the issue I have is comming from but moving on.
I then attempted to download lineage os following the guide but it did not work and I was fed up by this point to I began the process of reverting everything I did. I downloaded SuperSu to deroot my device. After derooting my device I went to the bootloader and typed in fastboot oem lock, locking my device and dooming me.
In my attempts to escape from the hell I am currently in I downloaded LGUP v1.16.03 and v1.14 (I tried them both deleting the previous one before installing the new one) yet each time I was stuck with the this error code Error Code = 0x2000, Invalid command response when the progress bar reach 9%.
The dll i used is version 0.0.3.23 and the one provided by LGUP v.1.16.03, and the firmware I attempted to download was V600TM20n_02_TMO_US_OP_0111.kdz on LGUP it says V600TM20n oh and also I did try UPPERCUT, no resuts
Currently on my phone's download mode screen at the bottom in red it says Modified / E / L / RO / id : 3(NA2_US) I have also tried LGUP Cmd but same results
I have tried LG bridge but it says connecting and then no device found :/
I wish i could say i tried lg flash tool but i have no idea on how to use it
Possibly another big mistake (idk what im doin) I used the QFIL and restore the abl_a and abl_b to their original versions after locking the bootloader.
Please tell me if there is anything else I can do or if I now own a $300 brick. If I do have a $300 brick is there any value I can get from it to fund my walmart flip phone that I will have to buy?
unregisteredhypercam said:
Greetings all, I have come to ask for advice on how to debrick my lg v60 version V600TM20n. First, how I ended up in this situation.
To begin, I followed this guide to unlock bootloader and root my phone then I followed this guide in an attempt to install a custom rom however, i did not get too far.
I tried to remove vbmeta verity as per the requirements of the form and in doing so input this line into my bootloader fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img with the file provided by this form I think this is where the issue I have is comming from but moving on.
I then attempted to download lineage os following the guide but it did not work and I was fed up by this point to I began the process of reverting everything I did. I downloaded SuperSu to deroot my device. After derooting my device I went to the bootloader and typed in fastboot oem lock, locking my device and dooming me.
In my attempts to escape from the hell I am currently in I downloaded LGUP v1.16.03 and v1.14 (I tried them both deleting the previous one before installing the new one) yet each time I was stuck with the this error code Error Code = 0x2000, Invalid command response when the progress bar reach 9%.
The dll i used is version 0.0.3.23 and the one provided by LGUP v.1.16.03, and the firmware I attempted to download was V600TM20n_02_TMO_US_OP_0111.kdz on LGUP it says V600TM20n oh and also I did try UPPERCUT, no resuts
Currently on my phone's download mode screen at the bottom in red it says Modified / E / L / RO / id : 3(NA2_US) I have also tried LGUP Cmd but same results
I have tried LG bridge but it says connecting and then no device found :/
I wish i could say i tried lg flash tool but i have no idea on how to use it
Possibly another big mistake (idk what im doin) I used the QFIL and restore the abl_a and abl_b to their original versions after locking the bootloader.
Please tell me if there is anything else I can do or if I now own a $300 brick. If I do have a $300 brick is there any value I can get from it to fund my walmart flip phone that I will have to buy?
Click to expand...
Click to collapse
Here,try this copy.Make sure you delete all previous versions of LGUP.