Can someone tlel me what is the secret ingredient requird to run LG flash Tool. I have converted mt kdz file, I have installed LG UP and the LG G5 DLL files, set port to use com41 but when I open LG Flash Tool I select manual mode then I select my dll and the converted dz file - then I click the yellow arrow and I get a message:
(S) Failed to load
What is the point in providing such pointless error messages that tell the user absolutely nothing about the problem.
If anyone can help I would be grateful.
Thanks.
Did you try to open LG UP using Uppercut? https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
Actually I got LG Flash Tool to work, but only v1.8.1203 worked - previous and newer versions all gave the error reported in my original post. Managed to flash the stock ROM as required.
Thanks.
Related
Current situation:
I have a LG G5 H850 VDF that had been unlocked official BL, and also flashed the TWRP Rec and rooted.
when I power up my H850, there is a tip on the screen , which contain a exclamation mark with yellow or red background.
I flash the kdz file in download mode via LG UP, it always stay at 9% each time, and shows a error:
Error: Error Code = 0x81000304, CBasicFlash::_func_LoadGptF...-Error Code:8224
Click to expand...
Click to collapse
(drivers and dlls have been installed. )
in that case, I have nothing to do except update system via twrp zip firmware, but I want solve this problem.
if anyone know the solution of this problem, please help me. Thanks.[/SIZE][/SIZE]
Friends could tell me how to extract a .Dz in Lg L3 II, I already tried with several tools but it gives me this error "invalid markers in main header" or "invalid magic". Or if any of you can give me the system.bin I will be grateful.
search in Google for how to extract kdz
i think it is possible but difficult
excuse me , why u want to do that ? :laugh:
ahmedAZ said:
search in Google for how to extract kdz
i think it is possible but difficult
excuse me , why u want to do that ? :laugh:
Click to expand...
Click to collapse
My lg e425 in mode HS-USB QDLoader 9008 I need to extract .tot or .dz to restore the phone. I already search for google, but I can not extract the .dz or .tot to this phone
Hi everyone..
I am trying to flash my lg g4 (h815) with lg flash tool 2014 but it gives "contact system administrator" error.i tried flashing it on lg up tool but give some error..i have also tried flashing it on lg flash tool 1.8 but all waste.
I also tried updating it from software update..the update is available but when i try to install it.it just reboot and the update screen appears and after a few seconds the dead andriod appears and displays error...how to flash my lg g4..
Anyone please help me: :crying:
jalalnature said:
Hi everyone..
I am trying to flash my lg g4 (h815) with lg flash tool 2014 but it gives "contact system administrator" error.i tried flashing it on lg up tool but give some error..i have also tried flashing it on lg flash tool 1.8 but all waste.
I also tried updating it from software update..the update is available but when i try to install it.it just reboot and the update screen appears and after a few seconds the dead andriod appears and displays error...how to flash my lg g4..
Anyone please help me: :crying:
Click to expand...
Click to collapse
check if bootloader is locked, if so, then unlock it and try to flash again
intel_wise said:
check if bootloader is locked, if so, then unlock it and try to flash again
Click to expand...
Click to collapse
How to unlock bootloader?
Do i have to root my phone?
please, see this post, let me know if helped
http://www.reviversoft.com/answers/...lem-with-the-firmware-update-and-verification
Greetings all, I have come to ask for advice on how to debrick my lg v60 version V600TM20n. First, how I ended up in this situation.
To begin, I followed this guide to unlock bootloader and root my phone then I followed this guide in an attempt to install a custom rom however, i did not get too far.
I tried to remove vbmeta verity as per the requirements of the form and in doing so input this line into my bootloader fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img with the file provided by this form I think this is where the issue I have is comming from but moving on.
I then attempted to download lineage os following the guide but it did not work and I was fed up by this point to I began the process of reverting everything I did. I downloaded SuperSu to deroot my device. After derooting my device I went to the bootloader and typed in fastboot oem lock, locking my device and dooming me.
In my attempts to escape from the hell I am currently in I downloaded LGUP v1.16.03 and v1.14 (I tried them both deleting the previous one before installing the new one) yet each time I was stuck with the this error code Error Code = 0x2000, Invalid command response when the progress bar reach 9%.
The dll i used is version 0.0.3.23 and the one provided by LGUP v.1.16.03, and the firmware I attempted to download was V600TM20n_02_TMO_US_OP_0111.kdz on LGUP it says V600TM20n oh and also I did try UPPERCUT, no resuts
Currently on my phone's download mode screen at the bottom in red it says Modified / E / L / RO / id : 3(NA2_US) I have also tried LGUP Cmd but same results
I have tried LG bridge but it says connecting and then no device found :/
I wish i could say i tried lg flash tool but i have no idea on how to use it
Possibly another big mistake (idk what im doin) I used the QFIL and restore the abl_a and abl_b to their original versions after locking the bootloader.
Please tell me if there is anything else I can do or if I now own a $300 brick. If I do have a $300 brick is there any value I can get from it to fund my walmart flip phone that I will have to buy?
unregisteredhypercam said:
Greetings all, I have come to ask for advice on how to debrick my lg v60 version V600TM20n. First, how I ended up in this situation.
To begin, I followed this guide to unlock bootloader and root my phone then I followed this guide in an attempt to install a custom rom however, i did not get too far.
I tried to remove vbmeta verity as per the requirements of the form and in doing so input this line into my bootloader fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img with the file provided by this form I think this is where the issue I have is comming from but moving on.
I then attempted to download lineage os following the guide but it did not work and I was fed up by this point to I began the process of reverting everything I did. I downloaded SuperSu to deroot my device. After derooting my device I went to the bootloader and typed in fastboot oem lock, locking my device and dooming me.
In my attempts to escape from the hell I am currently in I downloaded LGUP v1.16.03 and v1.14 (I tried them both deleting the previous one before installing the new one) yet each time I was stuck with the this error code Error Code = 0x2000, Invalid command response when the progress bar reach 9%.
The dll i used is version 0.0.3.23 and the one provided by LGUP v.1.16.03, and the firmware I attempted to download was V600TM20n_02_TMO_US_OP_0111.kdz on LGUP it says V600TM20n oh and also I did try UPPERCUT, no resuts
Currently on my phone's download mode screen at the bottom in red it says Modified / E / L / RO / id : 3(NA2_US) I have also tried LGUP Cmd but same results
I have tried LG bridge but it says connecting and then no device found :/
I wish i could say i tried lg flash tool but i have no idea on how to use it
Possibly another big mistake (idk what im doin) I used the QFIL and restore the abl_a and abl_b to their original versions after locking the bootloader.
Please tell me if there is anything else I can do or if I now own a $300 brick. If I do have a $300 brick is there any value I can get from it to fund my walmart flip phone that I will have to buy?
Click to expand...
Click to collapse
Here,try this copy.Make sure you delete all previous versions of LGUP.
Hello ! I'm Mint rhfo !
I also suffered a hard brick while working with the G6.
The attached file below was deleted, so I searched for it myself and eventually succeeded in unpacking the hard brick.
Required files
1. QFIL : 2.0.1.1 (This is the QFIL version I used)
link : https://drive.google.com/file/d/1RxsklHLfm75hTBYPxMuGBJ2MmbTGpVgv/view?usp=share_link
2. firehose : https://drive.google.com/file/d/1UQ9xzAvDC0CJnTW8Lk9HbK8E6VX-8RSE/view?usp=share_link
3. LG Firmware (Download the 20g version firmware) : https://lg-firmwares.com/
How to Unbrick
1. Put your G6 into EDL mode
2. Right after selecting firehose in QFIL, try to set partition ( It's good if this action is fast. )
If it takes a long time to mount the file hose, remove the battery and try again !
3. congratulations !
If you have succeeded in accessing the partition settings, please refer to the YouTube below.
(Thank you to the person who made the video below.)
Youtube :
dont work on lg g6 ls993