Friends could tell me how to extract a .Dz in Lg L3 II, I already tried with several tools but it gives me this error "invalid markers in main header" or "invalid magic". Or if any of you can give me the system.bin I will be grateful.
search in Google for how to extract kdz
i think it is possible but difficult
excuse me , why u want to do that ? :laugh:
ahmedAZ said:
search in Google for how to extract kdz
i think it is possible but difficult
excuse me , why u want to do that ? :laugh:
Click to expand...
Click to collapse
My lg e425 in mode HS-USB QDLoader 9008 I need to extract .tot or .dz to restore the phone. I already search for google, but I can not extract the .dz or .tot to this phone
Related
I'm stuck at recovering my phone from "Security Error". I tried LGNPST but it didn't work. Then I tried KDZ updater, but I'm again stuck I don't know phone's IMEI and I can't find its KDZ files anywhere. Can I use KDZ files of E975 instead ? Help plz, I'm beginner
Amshee said:
I'm stuck at recovering my phone from "Security Error". I tried LGNPST but it didn't work. Then I tried KDZ updater, but I'm again stuck I don't know phone's IMEI and I can't find its KDZ files anywhere. Can I use KDZ files of E975 instead ? Help plz, I'm beginner
Click to expand...
Click to collapse
E970 use tot and dll file only.not have kdz
go here forum.xda-developers.com/showthread.php?t=2668412
E97020j firmware for AT&T LG Optimus E970
Need E97020j firmware for AT&T LG Optimus E970 , Any help would be greatly appreciated ! Thank you !
Note: go here forum.xda-developers.com/showthread.php?t=2668412 not available !!!
My lg e970 is hard bricked and i need adb dump/backup to revive that . if someone can provide that it will be of great help . the procedure to create adb backup is mentioned below. i hope some noble soul will help me smile
step 1: root your device.
step 2: go to setting > about > software info > build info > tap 5-6 times until message getting to enable developer mode.
step 3: go to setting > developer option > usb debugging >Turn ON
step 4: open your PC and run adb t from cmd.exe
step 5: run this command then check your mobile screen for grant su permission.
adb shell
su
dd if=/dev/block/mmcblk0 of=/sdcard/Alive_Dump.bin bs=1024 count=1048576
step 6: AFTER THAT create 1GB dump in your phone internal main storage.
find name “Alive_Dump.bin”
note : command are case sensitive so try to direct copy paste better for no error.
Search of the file .mbn for QPSP. For H932 - to restore bricks. Through qualcomm 9008. Or any help on getting out of the state of a brick.
B0PoH said:
Search of the file .mbn for QPSP. For H932 - to restore bricks. Through qualcomm 9008. Or any help on getting out of the state of a brick.
Click to expand...
Click to collapse
this file not exist .
you need a flashing box like octoplus... to boot the phone , take it to a repair shop.
Thanks for the answer. Is octoplus in a nutshell or how to restore using octoplus? There, too, I need the mbn file as far as I understand.
ufs8998 use .elf file
I tried to search for a long time. Finally, end with the box.
sandking707 said:
ufs8998 use .elf file
I tried to search for a long time. Finally, end with the box.
Click to expand...
Click to collapse
Thanks for the answer and not tell me where to download ??
sandking707 said:
ufs8998 use .elf file
I tried to search for a long time. Finally, end with the box.
Click to expand...
Click to collapse
B0PoH said:
Thanks for the answer and not tell me where to download ??
Click to expand...
Click to collapse
He said he never found a place to download and used Octopus box instead.
ChazzMatt said:
He said he never found a place to download and used Octopus box instead.
Click to expand...
Click to collapse
I have Octoplus, but it sews only in a Download mod. Perhaps the new version has the ability to sew flash memory. Who can flash the phone remotely on Octoplus??
B0PoH said:
I have Octoplus, but it sews only in a Download mod. Perhaps the new version has the ability to sew flash memory. Who can flash the phone remotely on Octoplus??
Click to expand...
Click to collapse
you need octopus with box not the cracked one because you must disassemble the phone and connect the cable.
Maybe someone already has a dump file from lg v30 h932 T-mobile if there is, please contact me. After searching for solutions, there were two possible solutions. The phone and port 9008 sees XiaoMiFlash but you need to correctly convert the KDZ file to XiaoMiFlash format. The second is still looking for a nbm file that can sew QPSP. Or options for converting KDZ to nmb. Who has a tutorial on flashing the phone through octoplus and connecting via cable to JTAG?
@runningnak3d is the expert. Maybe he may have some insight.
I hope you don't me mentioning you here Brian.
----Aakash
I don't know of any T-Mobile firehoses that have leaked... not just the H932, but ANY LG T-Mobile phone. Since T-Mobile uses their own RSA cert for signing, and the firehose is signed just like the firmware, there is less of a chance of it leaking.
Now with that said, if Octopus can flash an H932 in EDL mode (9008), then they got the firehose from somewhere. However, those douche nozzles encrypt the firehose, and you need one of their boxes to use it. I have contemplated buying one, and then sniffing the USB traffic to obtain the decrypted firehoses for every phone that I can get my hands on. You should never have to pay for something that they got from a leaked source.
-- Brian
B0PoH said:
Maybe someone already has a dump file from lg v30 h932 T-mobile if there is, please contact me. After searching for solutions, there were two possible solutions. The phone and port 9008 sees XiaoMiFlash but you need to correctly convert the KDZ file to XiaoMiFlash format. The second is still looking for a nbm file that can sew QPSP. Or options for converting KDZ to nmb. Who has a tutorial on flashing the phone through octoplus and connecting via cable to JTAG?[/QUOT]
How to backup dump file from working LG v30 and flash it on "9008 bricked phone". (I have two v300L phones. One is working another one is hard bricked)
Click to expand...
Click to collapse
Can someone tlel me what is the secret ingredient requird to run LG flash Tool. I have converted mt kdz file, I have installed LG UP and the LG G5 DLL files, set port to use com41 but when I open LG Flash Tool I select manual mode then I select my dll and the converted dz file - then I click the yellow arrow and I get a message:
(S) Failed to load
What is the point in providing such pointless error messages that tell the user absolutely nothing about the problem.
If anyone can help I would be grateful.
Thanks.
Did you try to open LG UP using Uppercut? https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
Actually I got LG Flash Tool to work, but only v1.8.1203 worked - previous and newer versions all gave the error reported in my original post. Managed to flash the stock ROM as required.
Thanks.
Long short story(unlocked the bootloader,installed TWRP+magisk,damaged boot,bootloop,relocked bootloader ), i hard bricked my PCCM00 10x zoom, no stock recovery, locked bootloader and the bootloop with "The current image (boot/recovery) has been destroyed,please flash the correct image..)
I can only access the phone in EDL mode, in device manager appears unde com4 port - Qualcomm HS-USB QDloader 9008 (COM4).The only problem is , after decrypting the .ozip firmware from Oppo , i'm not finding the required files for flashing the phone with Qfil flashing tool from Qualcomm.(rawprogram,patch xml files and that .mbn firmware file).It s possible to generate those files from my actual firmware of i need another different chinese firmware archive with ColorOS .
Thank you
mura69 said:
Long short story, i hard bricked my PCCM00 10x zoom, no stock recovery, locked bootloader and the bootloop with "The current image (boot/recovery) has been destroyed,please flash the correct image..)
I can only access the phone in EDL mode, in device manager appears unde com4 port - Qualcomm HS-USB QDloader 9008 (COM4).The only problem is , after decrypting the .ozip firmware from Oppo , i'm not finding the required files for flashing the phone with Qfil flashing tool from Qualcomm.(rawprogram,patch xml files and that .mbn firmware file).It s possible to generate those files from my actual firmware of i need another different chinese firmware archive with ColorOS .
Thank you
Click to expand...
Click to collapse
I would recommend taking your device to your nearest Oppo service centre
moozer said:
I would recommend taking your device to your nearest Oppo service centre
Click to expand...
Click to collapse
Thank you, but Europe is in lockdown and beside that , global Oppo doesn't want to help me because is a chinese model, so the nearest Oppo service that can help me would be in China
mura69 said:
Thank you, but Europe is in lockdown and beside that , global Oppo doesn't want to help me because is a chinese model, so the nearest Oppo service that can help me would be in China
Click to expand...
Click to collapse
Ah okay. Sorry to hear that. Can I ask...why did you relock the bootloader? Surely that's the issue
moozer said:
Ah okay. Sorry to hear that. Can I ask...why did you relock the bootloader? Surely that's the issue
Click to expand...
Click to collapse
Well,i couldn't flash the stock firmware from the stock recovery because of the unlocked bootloader.The browse option in sdcard was grayout and wifi search was not working.
mura69 said:
Long short story(unlocked the bootloader,installed TWRP+magisk,damaged boot,bootloop,relocked bootloader ), i hard bricked my PCCM00 10x zoom, no stock recovery, locked bootloader and the bootloop with "The current image (boot/recovery) has been destroyed,please flash the correct image..)
I can only access the phone in EDL mode, in device manager appears unde com4 port - Qualcomm HS-USB QDloader 9008 (COM4).The only problem is , after decrypting the .ozip firmware from Oppo , i'm not finding the required files for flashing the phone with Qfil flashing tool from Qualcomm.(rawprogram,patch xml files and that .mbn firmware file).It s possible to generate those files from my actual firmware of i need another different chinese firmware archive with ColorOS .
Thank you
Click to expand...
Click to collapse
Is this of any use?
https://romprovider.com/2019/12/android-10-opo-reno-10x-zoom/
Hello,
I have the same problem! Have you found a solution?
You are going through which software for the flash?
Have you found a solution?
mura69 said:
Long short story(unlocked the bootloader,installed TWRP+magisk,damaged boot,bootloop,relocked bootloader ), i hard bricked my PCCM00 10x zoom, no stock recovery, locked bootloader and the bootloop with "The current image (boot/recovery) has been destroyed,please flash the correct image..)
I can only access the phone in EDL mode, in device manager appears unde com4 port - Qualcomm HS-USB QDloader 9008 (COM4).The only problem is , after decrypting the .ozip firmware from Oppo , i'm not finding the required files for flashing the phone with Qfil flashing tool from Qualcomm.(rawprogram,patch xml files and that .mbn firmware file).It s possible to generate those files from my actual firmware of i need another different chinese firmware archive with ColorOS .
Thank you
Click to expand...
Click to collapse
Hello,
I have the same problem! Have you found a solution?
You are going through which software for the flash?
mura69 said:
Well,i couldn't flash the stock firmware from the stock recovery because of the unlocked bootloader.The browse option in sdcard was grayout and wifi search was not working.
Click to expand...
Click to collapse
Hey did you get it fixed in the end?
I didn t , i just sold it to a guy who could reflash the chip of the phone . Was my first/last oppo , never again . Still good luck with it !
Hi guys,
My realme 3 pro is bricked and I'm trying to revive it through this guide:
https://www.getdroidtips.com/how-to...e-3-pro-firmware-flash-file/#Firmware_Details
The device gets seen by the software but I can't proceed because it asks to select rawprogram0.xml and patch0.xml and I can't locate them. This old guide says that they are extracted from the file 'partition.xml'.
https://www.reddit.com/r/nexus5x/comments/6v2uza/a_possible_fix_for_hardbricked_devices_but_we/
Any chance any of you can extract those 2 files to bring to life my Realme 3 Pro?
Thanks in advance.
I have this same problem on ZTE N9132 , all the stock room available online only has rawprogram0.xml in it and no patch0.xml file. I have over 10 Qualcomm flashing software and they need the patch file before I can flash and unbrick my device