Related
can anyone make a tutorial about how to install cwm with SE Extreme Tweak Installer v1.8
it says suerimission denied
On which firmware are you? 4.0.2.A.0.62?
Is your device rooted? Because permission denied meens, that you have no root.
If you want to install clockworkmod on lww, check this out. It will automaticly install cwm, but I don't know if it works on locked bootloader...
For SE Tweak installer you could check this out. It's a tutorial
how to root it then?
On which firmware version are you? 4.0.2.A.0.62?
Check out this here
But go to settings -> about phone -> build number and tell which version please!
Simplest Guide to install cmw !
As is usual with most updates, the Sony Ericsson Walkman Live lost root access after its recent update to Android 4.0.4. The guide below will show you how to obtain root access on this device running the 4.1.B.0.431 version of the OS and install ClockworkMod Recovery, enabling you to flash custom ROMs and do other things that require root access.
I. Before You Begin
1. This will not erase any data from your device, but as a precaution, do a backup of what you feel is important just in case.
2. This solution works by flashing a modified kernel that will provide root access. If you are not okay with this, do not proceed any further.
3. You will need a device with an unlocked bootloader for the procedure to work.
{ 4. If you want to install custom rom then download the custom rom and extract it. then there would a boot.img and replace it with the below bootextended blah blah.img } not understood? obviously... read full and then come back to this step.
II. Necessary Downloads
1. boot_EXtendedStockKernel_WT19i.img.
2. Fastboot Files
III. Flashing the Modified Kernel
1. Extract the fastboot-win32.zip file you downloaded above to a folder in your C:\ drive. You should end up with a folder named C:\fastboot-win32 containing fastboot.exe. Rename folder to fastboot for ease.
2. Copy the boot_EXtendedStockKernel_WT19i.img file you downloaded above to the same folder. Rename the file as boot.img for ease
3. Power down your device and put it into Fastboot Mode. To do this, press and hold the Volume Up + Power buttons until it enters the Fastboot mode. Blue led will glow.
3. Open up a Command Prompt window. To do this on your Windows 7 PC, click on the Windows Start button, type cmd in the search box and hit enter.
4. Run the following commands: (Get into . fastboot directory first ):- It should look as this
c:\fastboot\ fastboot flash boot.img
That’s it! You should have a rooted device after a reboot!
pls hit thanks if i helped.!
rachit.rc96 said:
As is usual with most updates, the Sony Ericsson Walkman Live lost root access after its recent update to Android 4.0.4. The guide below will show you how to obtain root access on this device running the 4.1.B.0.431 version of the OS and install ClockworkMod Recovery, enabling you to flash custom ROMs and do other things that require root access.
I. Before You Begin
1. This will not erase any data from your device, but as a precaution, do a backup of what you feel is important just in case.
2. This solution works by flashing a modified kernel that will provide root access. If you are not okay with this, do not proceed any further.
3. You will need a device with an unlocked bootloader for the procedure to work.
{ 4. If you want to install custom rom then download the custom rom and extract it. then there would a boot.img and replace it with the below bootextended blah blah.img } not understood? obviously... read full and then come back to this step.
II. Necessary Downloads
1. boot_EXtendedStockKernel_WT19i.img.
2. Fastboot Files
III. Flashing the Modified Kernel
1. Extract the fastboot-win32.zip file you downloaded above to a folder in your C:\ drive. You should end up with a folder named C:\fastboot-win32 containing fastboot.exe. Rename folder to fastboot for ease.
2. Copy the boot_EXtendedStockKernel_WT19i.img file you downloaded above to the same folder. Rename the file as boot.img for ease
3. Power down your device and put it into Fastboot Mode. To do this, press and hold the Volume Up + Power buttons until it enters the Fastboot mode. Blue led will glow.
3. Open up a Command Prompt window. To do this on your Windows 7 PC, click on the Windows Start button, type cmd in the search box and hit enter.
4. Run the following commands: (Get into . fastboot directory first ):- It should look as this
c:\fastboot\ fastboot flash boot.img
That’s it! You should have a rooted device after a reboot!
pls hit thanks if i helped.!
Click to expand...
Click to collapse
But that's for unlocked bootloader only! With the method I posted, you can root without unlocking the bootloader...
@OP Please tell us which build number you have! You must go to settings -> About phone -> Build number and tell us the number (or at least the 3 or 2 last numbers). If .42, .58, .62, .69, .432, .578! Otherwise we can't help you
First off, greetings to all. Not trying to hijack the thread but I have a quasi-related question.
Have a LWW WT19i, with Android 4.1.B.0.431 rooted as per the instructions here, with a locked bootloader (unlock allowed: no). I want to install Real ICS r5.2 which states it works with a locked BL, however the instructions ask me to use CWM which I can find no clear tutorial on how to install (most guides suggest installing new kernel).
Any help would be appreciated. Also fini13, if you're as new to this as I am, the guide I listed should help you at least with the rooting.
Dark_Az_ said:
First off, greetings to all. Not trying to hijack the thread but I have a quasi-related question.
Have a LWW WT19i, with Android 4.1.B.0.431 rooted as per the instructions here, with a locked bootloader (unlock allowed: no). I want to install Real ICS r5.2 which states it works with a locked BL, however the instructions ask me to use CWM which I can find no clear tutorial on how to install (most guides suggest installing new kernel).
Any help would be appreciated. Also fini13, if you're as new to this as I am, the guide I listed should help you at least with the rooting.
Click to expand...
Click to collapse
When your phone is rooted, you sould install cwm with the Extreme Tweak installer. But make sure you select your phone, otherwise it could brick.
Give it a shot
mihahn said:
When your phone is rooted, you sould install cwm with the Extreme Tweak installer. But make sure you select your phone, otherwise it could brick.
Give it a shot
Click to expand...
Click to collapse
Sir I've installed cwm using xparts and I'M ABLE to get into CWM recovery mode using the one click button in xparts..bt i CANT do the same while swithing on the fon,by pressing (also tried tapping) vol down key, after seeing the blue light sensor..i've tried many times&many ways as explained in many threads..bt coudnt... :crying:
why its so?? Can u once again say the correct combination of keys pls?
live with walkman..locked bl..stock rom&kernal..just rooted..
EDIT: TAP POWER BUTTON TO ENTER INTO RECOVERY MODE....Its not vol down key now in pvyparts 5.5.0.4
follow
fini13 said:
can anyone make a tutorial about how to install cwm with SE Extreme Tweak Installer v1.8
it says suerimission denied
Click to expand...
Click to collapse
first root by this method by doomlord
only follow 1 and 2 steps if u wan Gingerbread
and all for Ics
link- http://forum.xda-developers.com/showthread.php?t=1695514
then insall cwm
download CWM v5.02.7 from here:
http://www.mediafire.com/download/73xv18tht0e8zt4/CWM-Install.rar
requirements:
rooted device
how to install CWM on any xperia
1.turn on USB debugging
2.connect your phone to comp
3.download tthe above file and extract it
4.install-cwm2 for (xperia mini/mini pro/
active/live with walkman)
5.switch off your device
6.turn on the device and wait till "SONY
ERICSSON" logo appers
7.after "SONY ERICSSON" logo appears just
tap the volume down button repeatedly till
CWM open.
The simple method is, try to unlock yor device then install custom kernel that support autoroot and cwm, much tutorial for that in xda. :thumbup:
Here We have the Root And CWM for Nexus 10 On Android 4.2.2!
Step 1 - Download Android SDK from the Android Developers website and install with USB drivers. See: How to Set Up Android SDK (Fastboot / ADB) on Windows.
Step 2 - Enable USB Debugging mode in your Nexus 10 tablet.
Step 3 - Download Fastboot and extract it in android-sdk-windowsplatform-tools directory. Create directory if not already there.
NOTE: Skip Steps 1, 2, 3 if you already have them.
Step 4 - Download SuperSU v1.04 (UPDATE-SuperSU-v1.04.zip) and copy it to your sdcard on your Nexus 10 tablet.
Step 5 - Make sure you have backup your data as it will be removed. Then switch OFF your Nexus 10.
Step 6 - Download recovery-clockwork-touch-6.0.2.3-manta.img and copy/paste it in the android-sdk-windowsplatform-tools directory.
Step 7 - Now go into Fastboot Mode on Nexus 10. How? Press Volume Down + UP + Power key for a few seconds till you see some text on the screen.
Step 8 - Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click > Open Command Prompt).
Step 9 - Type in the following command and press Enter.
fastboot flash recovery recovery-clockwork-touch-6.0.2.3-manta.img
Click to expand...
Click to collapse
Step 10 - Once completed, choose RECOVERY MODE from the Fastboot menu and enter Recovery Mode.
Step 11 - Then scroll down to “flash zip from SD card” and press the Power button to select it.
Step 12 - Press the Power button again and select “choose zip from sdcard”.
Step 13 - Now using your volume keys, navigate to the UPDATE-SuperSU-v1.04.zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.
Step 14 - After the installation completes, go to “+++++Go Back” and reboot the phone by selecting “reboot system now” from the recovery menu. Then Choose yes flash recovery back (this will make CWM your permanent recovery mode)
That’s it. Your Nexus 10 is now rooted on Android 4.2.2 JDQ39 software version of Jelly Bean and even has a custom CWM recovery installed. Check for the SuperSU app in your apps list to verify.
Root and CWM for Nexus 7
Root and CWM for Nexus 4
Reserved...
Thanks udi, but could you also post how to do it on stock rom with stock recovery? Much appreciated! I keep wathing your youtube videos lol :good:
lKBZl said:
Thanks udi, but could you also post how to do it on stock rom with stock recovery? Much appreciated! I keep wathing your youtube videos lol :good:
Click to expand...
Click to collapse
what do u want root or recovery??
AW: [How-to]Root Android 4.2.2 And Install CWM
lKBZl said:
Thanks udi, but could you also post how to do it on stock rom with stock recovery? Much appreciated! I keep wathing your youtube videos lol :good:
Click to expand...
Click to collapse
I think you have to unlock your device first. Then you can easily install your custom recovery
how do I install TWRP now?
never mind was trying to flash a .TAR file this wayyy... figured it out. need a .img
Use the nexus 10 toolkit
Side Load via adb,
then re run the everything script in toolkit.
Worked like a charm for me, however, I did have to reflash back to my first backup, to be on stock 4.2.1 with stock kernel
mrdunlop said:
Use the nexus 10 toolkit
Side Load via adb,
then re run the everything script in toolkit.
Worked like a charm for me, however, I did have to reflash back to my first backup, to be on stock 4.2.1 with stock kernel
Click to expand...
Click to collapse
did it work for 4.2.2 ? i was rooted with 4.2.1 but the OTA screw it up.. i have to recover to factory .. then OTA ｔｏ ４．２．２
ｃｏｕｌｄ ｙｏｕ ｐｌｅａｓｅ ｂｅ ｍｏｒｅ ｓｐｅｃｉｆｉｃ ？
followed this method last night and got my tablet rooted with TWRP's recovery!
epunk said:
followed this method last night and got my tablet rooted with TWRP's recovery!
Click to expand...
Click to collapse
Glad that It's working!
Download Fastboot?
I cant download Download Fastboot... I have been denied access??? little help over here please I wanna root my device on 4.2.2... Thanks in advance!
just did the same thing with my n7, worked out easily on my mac !
#1 thanks a lot dude
Mr_Jay_jay said:
I cant download Download Fastboot... I have been denied access??? little help over here please I wanna root my device on 4.2.2... Thanks in advance!
Click to expand...
Click to collapse
http://www.mediafire.com/?lt8ghch95u5abgo fastboot files!
hope this one works :fingers-crossed:
I followed your method and got:
1.- Clockworkmod E:can't mount /sdcard/
2.- System stuck at Nexus X logo
What do I do now?
[update]
1.- Got factory image: https://developers.google.com/android/nexus/images#mantaray
2.- Ran "flash-all.bat" from the tgz
3.- Flashed recovery-twrp-2.4.2.0-manta.img
4.- TWRP asked if I wanted to install SU, I said yes
5.- Happy days.
Sorry if this has already been asked and I'm not understanding it.
I bought my mom a Nexus10 and it's missing some Indian fonts on it. I saw I need to flash on a fontpack to add them.
The tablet is totally stock, on 4.2.2..
Do I need to unlock the bootloader first (which wipes all the data) and then do the steps from the 1st post?
This whole process is not working for me. I am in windows 8 and it just doesnt let me install sdk nor even ask me to install drivers. Can you suggest what is the possible way out? I am unable to move ahead due to these issues :/
Root failed.
I followed all instructions (I have successfully rooted a number of smartphones and the Nexus 7 before this). The end result is that the Nexus 10 is unlocked, but hangs on bootup with just the X showing. I can't go into Recovery mode (I just get the Android lying on his back with an exclamation point showing and eventually it tries a normal boot - as far as the X).
I can't try Restart Bootloader as this, too, leads to just the X and hangs. I have reset the tab (power + down volume) and also have tried to reconnect the tab to the PC, which now does not recognize it, putting fastboot.exe and adb.exe out of reach. I think something might have gone wrong installing CWM, though it did boot up a couple of times after that with a couple of errors that passed by too fast to copy - before it started to hang. I never got a chance to put superuser on it as Recovery mode is out of reach. I tried a master reset the last time I got to Recovery Mode, but got several minor errors and now seem not to have ANY bootloader working. Short of sending the tab back to Google to have them restore a 'cherry' Android 4.2.2 (for a sum), I'm lost as to where to go next.
Any ideas?
s
paano po mag rooted ng myphone Rio fun
My recovery is lost when I did this!!!
I did this with adb....almost same step......now when try to go to recovery mode.....just logo......! I have to take battery out! so that I could boot into android.......when I accidently type -w which was for wipe,,,,,,,wiped thw whole phone..... now its just white screen when i boot into android......cant install new rom because recovery is lost.......what should I do now? help me please!
how to root s3mini 8200
Please anyone tell me ,how to root my Karbonn titanium s1 plus:laugh:
shivkiran9 said:
Please anyone tell me ,how to root my Karbonn titanium s1 plus:laugh:
Click to expand...
Click to collapse
Follow these steps.
1. First make sure that you have your device drivers installed on your PC.
2. Download your preferred superuser package. ( search the forum for superuser.zip files or just google it)
3. Download CWM recovery image file for your phone.
4. Once you have downloaded these two files, copy recovery.img to the folder where you have fastboot and adb. (If you have no idea what they are, please search the forum) and copy superuser.zip package to your phone's SD card.
5. Now connect your device to your PC. Make sure that developer options is enabled on your phone.
6. Open command prompt window where you have set up ADB. To do this press shift key on your computer’s keyboard and right click on the ADB folder, then select open command window here.
7. Type these commands in the command prompt.
fastboot devices (if you find anything appear on the cmd window, your device is connected)
fastboot flash recovery recovery.img
8. Then, switch off your mobile. Press Volume up+down + power button to enter into recovery.
9. Select Install from zip option -> Select zip from sdcard -> Choose superuser.zip.
10. It will install, then reboot your device.
You will find Superuser app in your phone, which means that your phone is successfully rooted. :good:
Hit thanks if this helped. If you need further help, PM me or search the forum. :laugh:
is this method for S1 plus or S1
dev27 said:
Follow these steps.
1. First make sure that you have your device drivers installed on your PC.
2. Download your preferred superuser package. ( search the forum for superuser.zip files or just google it)
3. Download CWM recovery image file, for your titanium s1 from the link below.
CWM recovery.img
4. Once you have downloaded these two files, copy recovery.img to the folder where you have fastboot and adb. (If you have no idea what they are, please search the forum) and copy superuser.zip package to your phone's SD card.
5. Now connect your device to your PC. Make sure that developer options is enabled on your phone.
6. Open command prompt window where you have set up ADB. To do this press shift key on your computer’s keyboard and right click on the ADB folder, then select open command window here.
7. Type these commands in the command prompt.
fastboot devices (if you find anything appear on the cmd window, your device is connected)
fastboot flash recovery recovery.img
8. Then, switch off your mobile. Press Volume up+down + power button to enter into recovery.
9. Select Install from zip option -> Select zip from sdcard -> Choose superuser.zip.
10. It will install, then reboot your device.
You will find Superuser app in your phone, which means that your phone is successfully rooted. :good:
Hit thanks if this helped. If you need further help, PM me or search the forum. :laugh:
Click to expand...
Click to collapse
Is this method works on S1 plus also?
Please confirm, as you post you are quoting CWM for S1
Thanks in advance
nanachitang420 said:
Is this method works on S1 plus also?
Please confirm, as you post you are quoting CWM for S1
Thanks in advance
Click to expand...
Click to collapse
I'm sorry for my carelessness, the download link I attached in the previous post was for S1. The method is similar to almost all android devices. The only thing you should worry about is CWM. You can follow the same steps but make sure that you have a CWM for your phone. If not, you may try porting it to your phone or just download ROM manager on your phone, it will provide you with all the options for flashing CWM. You can download ROM Manager from google play. Other than that, the steps are all the same.
Signature verification failed
dev27 said:
Follow these steps.
1. First make sure that you have your device drivers installed on your PC.
2. Download your preferred superuser package. ( search the forum for superuser.zip files or just google it)
3. Download CWM recovery image file for your phone.
4. Once you have downloaded these two files, copy recovery.img to the folder where you have fastboot and adb. (If you have no idea what they are, please search the forum) and copy superuser.zip package to your phone's SD card.
5. Now connect your device to your PC. Make sure that developer options is enabled on your phone.
6. Open command prompt window where you have set up ADB. To do this press shift key on your computer’s keyboard and right click on the ADB folder, then select open command window here.
7. Type these commands in the command prompt.
fastboot devices (if you find anything appear on the cmd window, your device is connected)
fastboot flash recovery recovery.img
8. Then, switch off your mobile. Press Volume up+down + power button to enter into recovery.
9. Select Install from zip option -> Select zip from sdcard -> Choose superuser.zip.
10. It will install, then reboot your device.
You will find Superuser app in your phone, which means that your phone is successfully rooted. :good:
Hit thanks if this helped. If you need further help, PM me or search the forum. :laugh:
Click to expand...
Click to collapse
cwm is compulsory or i can use android system recovery which already in s1 plus
i've tried this method. downloaded superuer.zip and tried to flash with android system recovery but it says "E:failed to verify whole-file signature;E:signature verification failed"
i've tried many rooting software but no luck so far.
vipul0197 said:
cwm is compulsory or i can use android system recovery which already in s1 plus
i've tried this method. downloaded superuer.zip and tried to flash with android system recovery but it says "E:failed to verify whole-file signature;E:signature verification failed"
i've tried many rooting software but no luck so far.
Click to expand...
Click to collapse
U have to either user CWM or TWRP recoveries. Android system recovery cannot be used to install superuser.
dev27 said:
U have to either user CWM or TWRP recoveries. Android system recovery cannot be used to install superuser.
Click to expand...
Click to collapse
Still unsuccessful. Can you please shed some light on how to go about with rooting this particular model? Thanks
judebrent87 said:
Still unsuccessful. Can you please shed some light on how to go about with rooting this particular model? Thanks
Click to expand...
Click to collapse
What error are you getting?
I run superuser after rebooting the phone while using the volume + power buttons. But after installation when I check root it says no access.
judebrent87 said:
I run superuser after rebooting the phone while using the volume + power buttons. But after installation when I check root it says no access.
Click to expand...
Click to collapse
Try doing this. Install SuperSU using CWM. If it installs, reboot the phone and check whether it has been installed by looking at the All apps section under settings. Then try to use any root application. If you encounter any problems in these sections, kindly specify where you get the problem.
Waiting for device
I am facing different problem.
Command prompt displays nothing after writing fastboot devices and on further process it says waiting for device.
i have karbonn drivers installed in my pc with windows 7 and usb debugging is on.
dev27 said:
Try doing this. Install SuperSU using CWM. If it installs, reboot the phone and check whether it has been installed by looking at the All apps section under settings. Then try to use any root application. If you encounter any problems in these sections, kindly specify where you get the problem.
Click to expand...
Click to collapse
How do I manage to get CWM for this model. All versions I've downloaded off playstore says it doesn't recognize this model!
Anybody got success?
Anybody tried this method?
Me have deleted SU accidently from system/xbin so, cant try rather is not working for me.
Better than all these cwm methods u download any framaroot.apk search it on google or on 4shared.com and just select install superSU and press gandalf option!!!
Hurray! Your phone is now rooted!
Just reboot to access the superuser app!
Press thanks button if i helped you!
Sent from my GT-S7562 using XDA Free mobile app
Isbit harmful for device ????
Sent from my Titanium S1 Plus using XDA Free mobile app
akshykhade said:
Isbit harmful for device ????
Sent from my Titanium S1 Plus using XDA Free mobile app
Click to expand...
Click to collapse
No way!!!!
It will not harm your device!!!!
Just use the updated version of the framaroot app!!!
Press thanks button if I helped you!!!!!!!
Sent from my GT-S7562 using XDA Free mobile app
I am just successfully rooted my device...
But can i upgrade rom to kitkat...
I tried it using cynogenmod but the error is ur device not supported..
Is there any way to upgrade rom
Sent from my Titanium S1 Plus using XDA Free mobile app
how can i flash rom and upgrade to 4.4 kitkat
Sent from my Titanium S1 Plus using XDA Free mobile app
how?
akshykhade said:
I am just successfully rooted my device...
But can i upgrade rom to kitkat...
I tried it using cynogenmod but the error is ur device not supported..
Is there any way to upgrade rom
Sent from my Titanium S1 Plus using XDA Free mobile app
Click to expand...
Click to collapse
Please confirm how you rooted the device? Which method you used?
My device is karbonn titanium s1 plus
And rooted using rootgenius application..
Sent from my Titanium S1 Plus using XDA Free mobile app
Hi guys,
anyone know how to root this phone?
root on Cubot Cheetah 2
https://forum.xda-developers.com/ge...bot-cheetah2-information-reviews-5-5-t3509666
I flashed TWRP, attachted as rar file. I did it like this:
http://forum.xda-developers.com/android/general/guide-clones-t3421539
Did you know that devices has build in recovery menu?!
It can only backup some user data for you
You can get into by pressing POWER and Volume+ for a few sec. while turned of tile boot.
Hold Volume + and press Power again.
***Do not press Volume down, it is "enter" in first recovery screen you maybe start fastboot or normal
***Volume + is for navigate in first recovery screen
Do not flash other super user as in thread... i did and had a heavy bootloop (;
hello
i cooked my 1st rom for a Cubot like this https://forum.xda-developers.com/showthread.php?t=1801690.
Then i flashed it with the recovery. As installation stoped i got a message: "no os installed do you realy like to reboot?!"
So i cancel process to restore systemfiles which i backed up befor. *
But now all system app are gone and recover them with Titanium backup doesn´t work well. I also got those files from stock image and maybe most by another backup by root explorer. What to do right now?
Try to install my rom again? Via fastboot? Or flashing a clean stockrom i don´t know.
I´m uploading Cheetah 2 rom i cooked since hours, it is ~2gb
Maybe someone can look into it
My pc is to slow to run a emulator to test it. That´s why i try flashing befor posting download link dang
stock rom:
CUBOT_6143C_CHEETAH_2_V02_20161027.zip https://mega.nz/#!VUc1TIjK!0FK1U5bt0NIL8RNEt-LkV-U5byVBroqV0PU92VzM5iE
http://forum.cubot.net/viewtopic.php?f=21&t=1176
other:
http://forum.cubot.net/viewforum.php?f=21
*did i just miss to wipe data .. i need some sleep ^o^
url to my rom
(part 1 /3) http://www.mediafire.com/file/0rwbkc84afgqd38/Cubot+Cheetah+2+6143c+V02+20161027+xda.7z.003
(part 2&3) soon here ~3hours+
HAPPY NEW YEAR
Do not install wip-rom.
This on your own risk:
https://www.mediafire.com/folder/5k0832h9u1cce/Cubot_Cheetah_2
Ok, after new installation and wipe partition my phone still alive
But all system app are missing! And no superuser!
toBsucht Psp said:
I flashed TWRP, attachted as rar file. I did it like this:
http://forum.xda-developers.com/android/general/guide-clones-t3421539
Did you know that devices has build in recovery menu?!
It can only backup some user data for you
You can get into by pressing POWER and Volume+ for a few sec. while turned of tile boot.
***Do not press Volume down, it is "enter" in first recovery screen you maybe start fastboot or normal
***Volume + is for navigate in first recovery screen
Do not flash other super user as in thread... i did and had a heavy bootloop (;
Click to expand...
Click to collapse
Thanks, but it didn't work for me...
Any other?
Do you use same firmware as me? That very importat!
What doesn´t work for you?
Are you in develop mode, enable debugging or connected as android bridge?
I flashed today TWRP to another Cheetah 2! But this super user installation blow my mind and device!!! Installed chainfire (2.52) as in linked thread made my phone hang on cubot bootlogo. Then i downloaded SR2-SuperSU-v2.79-SR2-20170103215521.zip and i pass the boot but now all system apps are gone again! Recovered it with my TWRP backup.
Thinking about retry 2.72 SuperSu which maybe was reason of bootloop on 1st cubot rooting :fingers-crossed:
Keep in mind to backup your whole system if you enter TWRP 1st time, befor installing SuperSu. Suggesting befor install TWRP make backup with stock recovery!
Maybe a video i made on that 2nd rooting procedure is helpful to you?
https://youtu.be/wqXhLF_WOKI
unlock bootloader
https://youtu.be/4dtMelJsGx0
I have cubot cheetah (1st edition). I Installed twrp, but it doesn't work. Touch doesn't work. Everything you posted, it's for 2nd edition.
Sent from cubot cheetah
I´m pretty sure boot into recovery is same as on Cheetah 2. I also believe you still not unlocked bootloader!
I Installed twrp, but it doesn't work. a) you did not Touch doesn't work. b) bootloader and stock recovery navigation via hardwarebutton TWRP via Touch
Click to expand...
Click to collapse
Do a websearch: "unlock bootloader adb" example
It is basicly same step as in ultimate MT6753 thread url = see me 1st reply
You just need fastboot.exe and your Cheetah running as adb device to install TWRP.
Make sure you got it installed Cheetah via ADB driver not as MTP device or else!
TWRP is same on cheetah 1 & 2 not 100% sure, maybe ask megathebest .
Alternative method:
adb.exe to unlock and
Sp flashtool with vCOM-driver installed
https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
https://androidmtk.com/install-android-cdc-driver-manually
Some links for you but you don´t need those files at the moment:
Cubot Cheetah 1 ROM Download - PC Flash Files http://forum.cubot.net/viewtopic.php?f=21&t=1146
Cubot Cheetah 1 ROM Download - T Card Flash Files 2 http://forum.cubot.net/viewtopic.php?f=21&t=1025
http://www.needrom.com/category/cubot/cheetah-cubot/
--------------------------------------------------------------------------------------------------------------------------
Another method to install TWRP is via update.zip but if you have to unlock oem via adb (minimal adb fastboot.exe) why manuel flash it.
How:
Rename twrp.zip to XXX-stock-rom name-XXX.zip place it at you internal memory boot into fastboot by power and volume button.
Ya, there are loads of tutorial on the internet about TWRP 3.1.1 For Cheetah 2 which means root is possible for the device running the latest Android OS.
Here is a guide which has shared the latest TWRP 3.1.1 with rooting guide
tiringer said:
I have cubot cheetah (1st edition). I Installed twrp, but it doesn't work. Touch doesn't work. Everything you posted, it's for 2nd edition.
Sent from cubot cheetah
Click to expand...
Click to collapse
i had the same problem but was very easy coming out. just connect the otg cable to your phone since the handset supports otg functionality then use the pc mouse once you have rebooted into recovery mode. works swiftly!!!!
Hey guys,
I'm still running the stock EUI ROM and getting pretty sick of it.
I've looked at getting my bootloader unlocked and installing TWRP but it seems pretty complicated for this device and what information I could find didn't work for me.
Can anyone show me some noob friendly guides on getting this done?
Much appreciated!
What?!? I never had a phone which bootloader unlocks easier than in Le Max 2. You have a special switch for that i developer options. That's all. Next you have to restart your phone in bootloader mode and flash desired recovery using fastboot commands.
Qron said:
What?!? I never had a phone which bootloader unlocks easier than in Le Max 2. You have a special switch for that i developer options. That's all. Next you have to restart your phone in bootloader mode and flash desired recovery using fastboot commands.
Click to expand...
Click to collapse
Wow, I didn't know that's how you unlock the bootloader. Sorry like I said I'm not very familiar with this device yet. Thanks!
As far as using fastbood commands I tried that but the drivers didn't seem to work on my PC. I couldn't get any of that to work. But I'll keep trying.
If you have anything like Samsung Kies or HTC Sync, etc. installed on your PC, you might try to remove it and reinstall drivers using "15 seconds ADB installed".
i just posted this yesterday,. i guess i could have chosen a better title... do you have any suggestions?? (maybe "full guide: adb, fastboot, twrp recovery, backup, flashing"?????)
http://forum.xda-developers.com/le-max-2/how-to/protocol-backup-stock-rom-flash-stock-t3517151
@thielek what windows do you have? I can suggest something if you have win7, for win10 you can find a guide in some other threads.
Qron said:
If you have anything like Samsung Kies or HTC Sync, etc. installed on your PC, you might try to remove it and reinstall drivers using "15 seconds ADB installed".
Click to expand...
Click to collapse
I had a Nexus 5 I was using on this PC I'll try removing all those drivers. Thanks.
valy_cta said:
@thielek what windows do you have? I can suggest something if you have win7, for win10 you can find a guide in some other threads.
Click to expand...
Click to collapse
Windows 10 here. Does that make it more difficult?
greenManGaming said:
i just posted this yesterday,. i guess i could have chosen a better title... do you have any suggestions?? (maybe "full guide: adb, fastboot, twrp recovery, backup, flashing"?????)
http://forum.xda-developers.com/le-max-2/how-to/protocol-backup-stock-rom-flash-stock-t3517151
Click to expand...
Click to collapse
Hey, this looks really good!
Thanks I will definitely give it a read and try to get this sorted. I'm pumped to get that CM 14.1 ROM when it gets a few more of the bugs sorted.
thielek said:
Windows 10 here. Does that make it more difficult?
Click to expand...
Click to collapse
No, actually you need to disable the signature verification if I recall it right. I can't find the thread for win10 driver installation right now but for sure I have seen it on xda for LeMax2
Here is the tuturial for noobs (I was noob too and I wrote it for people like me):
Here is the quick tutorial for users like me:
1. Enable USB Debugging
2. Connect phone to the computer
3. Unzip this https://www.androidfilehost.com/?fid=529152257862669609 and run LE_X2_fastboot.exe
4. Wait until it say "Press any button to reboot phone" and just press random button
5. Your phone will boot into system
If you want change to China 21s with SuperSU, you just have to:
1. Turn off your phone
2. Press VolumeUp + Power button - it's gonna boot you to TWRP
3. You can now upload the 21s.zip and SuperSU-v2.78...zip files to your phone from this thread: http://forum.xda-developers.com/le-m...a-rom-t3492640
4. On your phone go to Whipe and whipe all data (swipe blue arrow)
5. Go to Install and choose 21s.zip and wait - when it ends it's gonna boot you to the system
6. Turn off your phone and again boot to Recovery (VolumeUp + Power button)
7. Choose Install and choose SuperSU.zip and there you are!
Now you're gonna have China 21s with root and SuperSu!
Emokah said:
Here is the tuturial for noobs (I was noob too and I wrote it for people like me):
Here is the quick tutorial for users like me:
1. Enable USB Debugging
2. Connect phone to the computer
3. Unzip this https://www.androidfilehost.com/?fid=529152257862669609 and run LE_X2_fastboot.exe
4. Wait until it say "Press any button to reboot phone" and just press random button
5. Your phone will boot into system
If you want change to China 21s with SuperSU, you just have to:
1. Turn off your phone
2. Press VolumeUp + Power button - it's gonna boot you to TWRP
3. You can now upload the 21s.zip and SuperSU-v2.78...zip files to your phone from this thread: http://forum.xda-developers.com/le-m...a-rom-t3492640
4. On your phone go to Whipe and whipe all data (swipe blue arrow)
5. Go to Install and choose 21s.zip and wait - when it ends it's gonna boot you to the system
6. Turn off your phone and again boot to Recovery (VolumeUp + Power button)
7. Choose Install and choose SuperSU.zip and there you are!
Now you're gonna have China 21s with root and SuperSu!
Click to expand...
Click to collapse
Wow! That fastboot program was amazingly simple. Thank you! How did I know find this before. The other guides are very long.
So that installed cuoco92's ROM as well as TWRP. Do you suggest using his ROM? That second link you provided in the next paragraph didn't work.
I was looking for a very clean and vanilla android like ROM. I hate EUI and am excited for that CM 14.1 build but it's not ready yet.
Thanks again very much!
thielek said:
Wow! That fastboot program was amazingly simple. Thank you! How did I know find this before. The other guides are very long.
So that installed cuoco92's ROM as well as TWRP. Do you suggest using his ROM? That second link you provided in the next paragraph didn't work.
I was looking for a very clean and vanilla android like ROM. I hate EUI and am excited for that CM 14.1 build but it's not ready yet.
Thanks again very much!
Click to expand...
Click to collapse
Maybe Madsurfer's 21s will be good for you. It's without chinese apps etc.
Emokah said:
Maybe Madsurfer's 21s will be good for you. It's without chinese apps etc.
Click to expand...
Click to collapse
Cool I'll check that out.
Any idea what the best CM ROM is right now?
If I backup after Ive flashed twrp & want to restore on Mokee rom?Im on stock eui 19s & also Can I flash rom placed on internal storage?Coz it's showing storage as encrypted
Emokah said:
Here is the tuturial for noobs (I was noob too and I wrote it for people like me):
Here is the quick tutorial for users like me:
1. Enable USB Debugging
2. Connect phone to the computer
3. Unzip this https://www.androidfilehost.com/?fid=529152257862669609 and run LE_X2_fastboot.exe
4. Wait until it say "Press any button to reboot phone" and just press random button
5. Your phone will boot into system
If you want change to China 21s with SuperSU, you just have to:
1. Turn off your phone
2. Press VolumeUp + Power button - it's gonna boot you to TWRP
3. You can now upload the 21s.zip and SuperSU-v2.78...zip files to your phone from this thread: http://forum.xda-developers.com/le-m...a-rom-t3492640
4. On your phone go to Whipe and whipe all data (swipe blue arrow)
5. Go to Install and choose 21s.zip and wait - when it ends it's gonna boot you to the system
6. Turn off your phone and again boot to Recovery (VolumeUp + Power button)
7. Choose Install and choose SuperSU.zip and there you are!
Now you're gonna have China 21s with root and SuperSu!
Click to expand...
Click to collapse
The process I am aware of is
1. Unlock bootloader
2. Install twrp (or any custom recovery) in fastboot mod
3. Flash SuperSu zip to get root access.
Can you please explain in your tutorial the first paragraph can do this? I just want these 3 thing to do mentioned above. Thanks.
manishsoni7689 said:
The process I am aware of is
1. Unlock bootloader
2. Install twrp (or any custom recovery) in fastboot mod
3. Flash SuperSu zip to get root access.
Can you please explain in your tutorial the first paragraph can do this? I just want these 3 thing to do mentioned above. Thanks.
Click to expand...
Click to collapse
This 5 steps:
1. Enable USB Debugging
2. Connect phone to the computer
3. Unzip this https://www.androidfilehost.com/?fid=529152257862669609 and run LE_X2_fastboot.exe
4. Wait until it say "Press any button to reboot phone" and just press random button
5. Your phone will boot into system
unlocks you Bootloader, installs TWRP and installs Cuoco92 with root and everything included.
You can install new ROM like 21s and just flash SuperSu zip to get it.
manishsoni7689 said:
The process I am aware of is
1. Unlock bootloader
2. Install twrp (or any custom recovery) in fastboot mod
3. Flash SuperSu zip to get root access.
Can you please explain in your tutorial the first paragraph can do this? I just want these 3 thing to do mentioned above. Thanks.
Click to expand...
Click to collapse
Hello I've successfully flashed mokee from,But Jio is not working only data is working.Cannot make or receive calls,Any solutions?
RISHI RAJ said:
Hello I've successfully flashed mokee from,But Jio is not working only data is working.Cannot make or receive calls,Any solutions?
Click to expand...
Click to collapse
Buddy, I am still finding proper steps to flash twrp, so I can't guide you on custom roms.
Can you please give the steps those you followed in order to install twrp. Thanks
manishsoni7689 said:
Buddy, I am still finding proper steps to flash twrp, so I can't guide you on custom roms.
Can you please give the steps those you followed in order to install twrp. Thanks
Click to expand...
Click to collapse
check 3 posts up