Hi , I want to disable the fast charging of lg v10 , I looked at the setting ...but There are no option to toggle charge between fast and normal ....please help
Sent from my LG-H960 using Tapatalk
Use another charger other than LGs. I use my old HTC charger for example.
Sent from my LG-H901 using Tapatalk
there's no way to disable that if you use the original charger of V10, they are rated to charge as fast as they can...you need to use another charger, i recomend you use a 5V 700mah max amperage and if you dont bother to turn off your device after plug it because your battery will get a good calibration and last a little bit longer, for sure a full charge with 700mah charger take almost 3:30 hours but it will make difference, trust me, i do the same with mine at least 1 time per week.
Hi,
sun_is_shinning said:
i recomend you use a 5V 700mah max amperage and if you dont bother to turn off your device after plug it because your battery will get a good calibration and last a little bit longer, (...)
Click to expand...
Click to collapse
you should use at least a normal 2A charger. As you for sure know amps a drawn by the device connected to the charger and the V10 pulls up to 1.5A if the battery is lower than 30-40%. Using a 700mA charger might kill your charger after some time.
cyvr1 said:
Hi,
you should use at least a normal 2A charger. As you for sure know amps a drawn by the device connected to the charger and the V10 pulls up to 1.5A if the battery is lower than 30-40%. Using a 700mA charger might kill your charger after some time.
Click to expand...
Click to collapse
kill the charger?! what are you talking about?!!! i use 5V 700mah charger 1 time per week since i brought my device back in july and until today i put it in charge with zero battery and until today nothing of that you saying happening...is bull****, slow charging is better way to keep your battery healthy for long time, fast charger deteriorate battery's faster...
trust me, slow charging dont kill charger or the battery, i do this since 2013, i do this with LG 4X HD, LG G2, LG G3, G Flex2 and now with V10 and nothing have happen to my devices, i know what i'm doing, i am electronic technician and i know what i do.
Related
I been looking like crazy and all I found were as high as 850mAh for the Droid Charger. Anyone found any other than the Stock Charger?
I use an old Nokia wall charger. The output is 550 mA. It works just fine. The way I see it is that its a higher output than just charging it through a computer and less than the stock wall charger.
The slower you can charge a Lithium-Ion battery, the better.
kendogg41 said:
The slower you can charge a Lithium-Ion battery, the better.
Click to expand...
Click to collapse
I need the faster you charge the lower the charge and wears out battery faster
if you do want a FAST Charge, then you got it with high output it'l kill your battery but.. there is an upside.. if you charge on fast charge..
then drain it 15 precent charge again you'll have similar effects of a long slow charge
The Apple charger is a 1000 mAh charger.
y2k1ltd said:
The Apple charger is a 1000 mAh charger.
Click to expand...
Click to collapse
apple phones also have crap battery time
I use an old Motorola charger because the cord is longer... charging it on the computer USB takes FOREVER!!! It is from a ROKR E8 and I think it says 650mAH The stock charger that came with the Slide is 1A and my GF's charger for her CLIQ XT is 850mAH.....
I use them all, does it really make a difference?
And how so I condition the battery because I get horrible battery life
So, I don't know if this is just my device or maybe already known. I don't see it here(or google) so I am going to post this so others can find this info faster than the 2hrs it took me.
Some Li-Ion batteries have a low max charge rate. Meaning you cant "over-current"(mA "Milli-Amps" or A "Amps") them too much(saves life). Well my Razr just showed me this. This can allow you to charge the battery faster if you have one that is tolerant of the "over-current".
Apparently maximum for the Droid RAZR is somewhere between 850mA and 1000mA
Tried using an HTC @ 1A and no joy.. wont charge.. actually says charging.. but the battery seems to have flipped the switch to not charge; and just continues to discharge normally; even the hidden status(dial *#*#4636#*#*) says charging but obviously not! Tried different HTC models and different cables. I am now only using my Moto supplied cable.
Even after it was dead. It would show the charging screen @ 0% and the light would be red. Stating that you cant turn it on cause there is not enough juice to finish boot. It would never go Green no matter how long I waited(10-15 minutes) usually only takes 5 minutes.
Found my OG Droid charger; remembering that it was lower than 1A. It actually is 5v 850mA. Charging away!
Remember the stock charger is rate @ 5v 750mA - this means you can probably use chargers from 700ish to maybe 900ish mA. I cannot confirm these estimates. Anyone else seen any other rates work?
Hope this helps someone down the road. I know it would have helped me!
MODS - Please, if this is wrong info please DO NOT HESITATE to notify me/remove/edit my post. I just want the right info somewhere, cause it was not well documented anywhere i searched via google.
Also - Thinking more on the subject - this could be the "Authorized Charger" bull that Moto likes to put on its devices i.e. The RAZR flip-phone was notoriuosly bad about this. Even my old nextel "beep beep" had this problem with OEM chargers. Had to spend $15+ on the official one. Again - if this info is wrong in ANY way please fix it or remove it.
use official 850mA charger and be happy. Motorola also confirmed using 1A chargers without any problems but any ways original ones are recommended.
Brilliant, my problem now makes sense!
Couple of questions: What does this mean to charging via USB instead of mains? Is it the plug or the cable that is rated to a certain ampage?
One more question. I found another usb plug rated to 300mA. I presume using this will just mean the phone charges slower? It won't have any negative effect on the battery?
Sent from my XT910 using XDA App
Just adding my experience... Have been using an iphone wall charger w/ the usb jack on it and the supplied motorola cable. Its listed as 1000Mah. Battery Monitor Widget shows it charging around 945Mah. Doesn't get hot, charges like a bat out of hell. Down side is phone is about 60% unresponsive during the charge.
Found a little info on this. Apparently different cables, when plugged in, short different contacts to let the device know what it's plugged in to. Resistors change the current. Audio out can tell if it's plugged into a dock versus USB versus wall charger. The Verizon replacement didn't work for me, but an hard incredible one did. They both charged but only the htc recognized computer connections
Sent from my DROID RAZR using Tapatalk
My stock Razr wall charger is 750mA. I use a 1000mA car charger and it works fine - doesn't get hot and charges faster.
But sometimes you do have to be careful. I had a friend who's noob mother fried her Bionic with a charger that was too many mA for it to handle.
__________
Razr XT912 Verizon
HTC Eris via GingerShedBread
strange... my stock charger's rated 850mA.. maybe because i use international GSM version of RAZR.. but it charge just fine..
but even i tried charge it with blackberry's 700 mA charger or my ipod touch 1000mA charger it both charge just fine.. and it feels like the 1000mA charge slightly faster..
too bad i broke my old nokia n900 1200 mA charger..
I'm using an HTC 1A charger: the RAZR doesn't become hot while charging and it's charging faster.
The limit is 1A anyway.
kholk said:
The limit is 1A anyway.
Click to expand...
Click to collapse
dang! so i guess nokia 1200mA charger won't be any good then..
thanks for the info though.. i was thinking of getting myself a nokia charger after read this thread..
Ever since my first motorola I've noticed that the stock charger is 5.1 volts.
Charging with other brands always seem to give worse battery life.
My old Rizr only lasted a day when charged from the USB of my computer, but 6-7 days with the original part.
Some of that is apparent with my car charger too, it says it's taking charge, but sometimes it will run backwards with GPS running..
I experience the charger issue last night.
I had low battery when I went to sleep, put the cable in and it said charging.
Came late to work because the phone drained the battery instead of charging. I used a 5V 1.2A charger and its been working great until last night. And I noticed my original charger is 5.1V 850mA for the Razr.
You learn something new every day!
/J
Hi people
Since I'm part of the lucky people owning a Huawei Ascend Mate 7 (MT7-TL10), I'm actually looking some accessories like a quick charger.
I wish a charger better than the original one if possible, with EU pins, and with a good quality checked (I prefer to avoid some product with awesome specs but not tested ...)
So anyone have any idea where I can find a good charger, and without any risk for my phone ?
Thanks
WolwX said:
Hi people
Since I'm part of the lucky people owning a Huawei Ascend Mate 7 (MT7-TL10), I'm actually looking some accessories like a quick charger.
I wish a charger better than the original one if possible, with EU pins, and with a good quality checked (I prefer to avoid some product with awesome specs but not tested ...)
So anyone have any idea where I can find a good charger, and without any risk for my phone ?
Thanks
Click to expand...
Click to collapse
for few days i went to jarir book store on KSA . I found Charger good price also 2 USB 5 volt 2.4 Amber ... compatiable with mate 7 and faster from orignal ...
just to know more fasting to charge wil damge your batter of mate 7 quickly .also orignal 2 A will damge
for me I charging with Iphone charge 1A good for batter and Stander and low risk to Device
If you want proper charging, then always use the accessories coming with that product. It is tested for sure and good. Other than that, you can use any charger delivering the same charge. The original charger is 5 volt, 2 Ampere. Don't use anything above 2 amperes as it may damage the device. Below that will charge it slowly.
BTW, why you don't want to use the original charger?
Sent from my Coolpad 9976A using Tapatalk
I use Nexus 6 Turbo charge (made by Motorola) 5v 1.6A it charge full battery in 90 minute.
http://www.motorola.com/us/accessories/power-storage/chargers/motorola-turbo-charger/motorola-turbo-charger-pdp.html
Is it safe for battery life of Mate 7?
I'm using a NTT Docomo Quickcharge 2.0 adapter and It does support it even though is not specified and it's not a qualcomm chip.
Sent from my HUAWEI MT7-L09 using Tapatalk
djmaxi said:
I'm using a NTT Docomo Quickcharge 2.0 adapter and It does support it even though is not specified and it's not a qualcomm chip.
Sent from my HUAWEI MT7-L09 using Tapatalk
Click to expand...
Click to collapse
Can you test it with ampere (free in gplay) i don't think it will charge over 1800mA so that it acts like a normal 2a charger
Fast charging
Using a fast charger will destroy your battery faster. Not recommended as the battery is not removable. You can get a battery and if you are comfortable removing the back and swapping it out then go for it.
Hi,
PoopDonkey said:
Using a fast charger will destroy your battery faster. Not recommended as the battery is not removable. You can get a battery and if you are comfortable removing the back and swapping it out then go for it.
Click to expand...
Click to collapse
that is not correct as you are not connecting the charger to the battery directly. In fact the charger is just a power supply. The actual charger is integrated into the phone (charging controller).
In general you need to know that volts are pushed to the device by the power supply and amps are drawn by the device (phone) from the power supply. Therefor using a power supply with more than 5V will kill your phone but using one with 2A, 3A or even 4A will make no difference as the charging controller will just pull the amps required. Because of that you can not really fast charge a phone by changing the power supply only if the phone supports the fast charge option (for example some Nexus phones).
I tested this myself with a power supply (can provide 5V and 1.5 to 4 amps) and an amp meter. The phone always drew between 1.5 and 1.6 amps (with and empty battery, 8 to 10% left) regardless of the selected amps of the power supply. Using a power supply with less than 1.5A will kill the power supply as the phone tries to draw the 1.5 amps or more. As result the power supply will get hot and eventually die.
Since battery is not removable be careful with fast charging, since it will decrease the life span of the battery and in the end it will just give you less battery performance.. it is stupid... however.. there is situations where it can be really needed though but not on a regular basis..
Last weekend I would really had needed fast charging.. It forced me to spend about 3 hours on a cafee so I could make it 100% so I did know I did survive the day with gps and all other things.. However in these situations I really like the ultra power saving mode..it saved me that night.. when I was lost in stockholm.. and my phone was really the only way to get contact with people
blackinfinity said:
Since battery is not removable be careful with fast charging, since it will decrease the life span of the battery and in the end it will just give you less battery performance.. it is stupid... however.. there is situations where it can be really needed though but not on a regular basis..
Last weekend I would really had needed fast charging.. It forced me to spend about 3 hours on a cafee so I could make it 100% so I did know I did survive the day with gps and all other things.. However in these situations I really like the ultra power saving mode..it saved me that night.. when I was lost in stockholm.. and my phone was really the only way to get contact with people
Click to expand...
Click to collapse
Why don't you buy a powerbank? I can advice you the xiaomi 16000mah. That one charges fast and you can be mobile.
Any recommendations?
I wonder if a S6 charger do the trick. Stock charger is too slow damn. Spending 3 hours to have a full charge is not acceptable for me.
I'm going to be honest, it doesn't really matter how you charge your phone as long as you don't go over 5v and 2 Amps. Batteries will automatically lose cells from charge cycles and by the time you feel the effects of the battery going bad, you would have already moved on to the next device for the next person to worry about. And saying to use the Stock Charger isn't really good enough as the Stock charger doesn't serve as a Car charger also. If you want to charge your phone quick, and you already have a 2 Amp charger, Check your microUSB cable. Don't use junk cables, buy quality or use the cable you received with the device. You get what you pay for. Fast Charging won't work as the Charger has a chip inside that communicates with the Phone and Device. Also, when buying a charger, don't just randomly buy a charger online, Make sure its UL Tested. Even if it says UL tested, there should be a test number on that UL Label, take it a step further and google it and make sure it matches the charger specs and passes as knockoff chargers are notorious for copying other chargers Regulatory icons to make it seem authentic. You don't want to buy a junk charger that ends up burning your house down or gives you a very bad 120 Volt shock through the microUSB cable that would also kill and fry your phone.
treem said:
I use Nexus 6 Turbo charge (made by Motorola) 5v 1.6A it charge full battery in 90 minute.
http://www.motorola.com/us/accessories/power-storage/chargers/motorola-turbo-charger/motorola-turbo-charger-pdp.html
Click to expand...
Click to collapse
1.6A is nothing.. i use 2.0A and it still chrges 3 hours
one friend conected his phone to a hi suite, he went to repair sistem or something like that, and it pop out an option of QUICK CHARGE... even he doesent know how that hapends, now his phone charges faster. he is on b331 rom
cyvr1 said:
Hi,
that is not correct as you are not connecting the charger to the battery directly. In fact the charger is just a power supply. The actual charger is integrated into the phone (charging controller).
In general you need to know that volts are pushed to the device by the power supply and amps are drawn by the device (phone) from the power supply. Therefor using a power supply with more than 5V will kill your phone but using one with 2A, 3A or even 4A will make no difference as the charging controller will just pull the amps required. Because of that you can not really fast charge a phone by changing the power supply only if the phone supports the fast charge option (for example some Nexus phones).
I tested this myself with a power supply (can provide 5V and 1.5 to 4 amps) and an amp meter. The phone always drew between 1.5 and 1.6 amps (with and empty battery, 8 to 10% left) regardless of the selected amps of the power supply. Using a power supply with less than 1.5A will kill the power supply as the phone tries to draw the 1.5 amps or more. As result the power supply will get hot and eventually die.
Click to expand...
Click to collapse
so much misinformation
this post is the only one who gets it right.
Kalemucu said:
Any recommendations?
I wonder if a S6 charger do the trick. Stock charger is too slow damn. Spending 3 hours to have a full charge is not acceptable for me.
Click to expand...
Click to collapse
You have not read my earlier post or you did not understand it. Changing the charger on the Mate 7 will have NO effect (zero, nada) on the time required to charge your phone except the charger delivers less then appr. 1.6A. Then it would take longer and evetually kill the charger. The Mate 7 uses a Kirin chip which has no fastcharge implemented. Samsung uses Qualcomm Chips with implemented fastcharge technology. The charger (in fact a power supply) and the phone/CPU/charge controller need to communicate with each other, otherwise fastcharge will not be activated (the reason fastcharge with charge-only cables does not work because they lack the required data cables for communication).
I'm going to be honest, it doesn't really matter how you charge your phone as long as you don't go over 5v and 2 Amps.
Click to expand...
Click to collapse
Wrong. Correct would be "I'm going to be honest, it doesn't really matter how you charge your phone as long as you don't go over 5v." The amps of the charger don't matter at all -> amps are PULLED by the phone not pushed to the phone. You could use a charger with 100 or 1000 amps and it would not hurt your phone a bit as long as it is only charged with 5 Volts.
More amps (>1.6A) on the charger do not improve the time for charging one second.
1.6A is nothing. i use 2.0A and it still chrges 3 hours.
Click to expand...
Click to collapse
Yes, and that won't change one bit even if you use the best and most expensive charger and a 1000$ cable. The Mate 7 is limited by its hardware (built in charge controller) and pulls max 1.6A. End of story.
As long as you don't understand how charging works you will spend 100's of bucks for cables and chargers to no avail.
The only reason, why charging with some charges is quicker than with others is that those chargers actually deliver the amps they are supposed to deliver. There are a lot of cheap/bad chargers out there which are labelled with 5V/2A but only deliver a fraction of the amps. You can identify those chargers easily because they get extremly hot. I use a 2A charger from Aukey which gets only lukeworm.
I know there is a thread about what charger to buy, but I have a specs question. Mine z5 came with the International charger and I am in the US. I noted it is 5v and 1.5a. I have a 5v 1a charger on hand. Can I use that?
Sure, it will just take longer to charge.
No lasting negative effects on the battery?
BigHulkDiesel said:
No lasting negative effects on the battery?
Click to expand...
Click to collapse
Most certainly no negative effects. In theory it should actually be better for the battery to charge it with less current, but I don't know if that is true.
Different topic: I read that there are multiple versions of the Z5 (US, Europe, ...) and that they support different LTE frequencies. So maybe you want to check if your mobile connection works as intended, if you don't have the US version.
My phone is showing LTE after choosing my apn settings.
I tried using a 5V 1A charger with my phone and it doesnt seem to work. (It works fine on my old phone) The charge light keeps turning on and off. The vibration pulse you hear when it starts charging keeps pulsing too.
Better use an HIGHER amperage, than lower!! Charger will adapte it to phone specifics...A lower amperage will reduce your battery capacity in long time.
I once connected my Z5C to an old 500mA charger (caught the wrong cable) and kept using it a bit (screen on, etc.) and it gave me a nag screen that said that the charger is not suitable because apparently the battery drain from usage was more than what trickled back in.
However, if left alone even a 500mA charger should eventually charge the phone, taking much longer though.
Generally, with chargers, you need to get the voltage right. If the Amperage is higher that what the OEM charger is it does not matter. The electronics in the device limit the charge to what the device can handle. The Amperage on the charger is the max it can deliver. In other words, the charger does not pump 2.5A into the phone forcefully, the phone just nibbles whatever it can take (say 1,5A).
farfetch said:
Better use an HIGHER amperage, than lower!! Charger will adapte it to phone specifics...A lower amperage will reduce your battery capacity in long time.
Click to expand...
Click to collapse
Any reliable source for that? The charging will be slower - yes, but I seriously doubt, that this has negative long-term effects on the capacity.
dd23 said:
Any reliable source for that? The charging will be slower - yes, but I seriously doubt, that this has negative long-term effects on the capacity.
Click to expand...
Click to collapse
Just try it by yourself for few days
Sent from my E5823 using Tapatalk
I think you need a 2A charger to be sure with the Z5c. Most of my older chargers take hours to charge it, and the car USB port (Nissan Qashqai 2015) barely charges it at all.
The UCH20 that came with the phone, takes 2 hours 15 mins to charge the phone fully. I got a quick charger which takes around 1 hour and 10 mins at max
Wow, really?
It is basic electronics. The voltage must be the exact one. Amperage is what the device draws , therefore the charger must be capable to provide a minimum not a maximum.
I repeat, it is basic electronics!
Now a more pertinent question :
What are the voltages for quick charge ? Does anyone know?
If someone has a original charger with quick charge can you please state what voltages are written on it?
Should be 2 or 3 voltages with lowest 5V
Edit : Found myself the info on Sony UK website of a Sony charger.
[email protected],
[email protected],
[email protected]
farfetch said:
Better use an HIGHER amperage, than lower!! Charger will adapte it to phone specifics...A lower amperage will reduce your battery capacity in long time.
Click to expand...
Click to collapse
I also want a source for that... It's the first time in my life i hear it's the opposite... and i have been charging this phone with 1 amp or 500mA (with pc usb) for the past 4 years, battery is still fine. Only used a 1.5A charger a few times.
On the other hand, my sisters z5 had a swollen battery a year ago, she always used quick chargers...
farfetch said:
Just try it by yourself for few days
Click to expand...
Click to collapse
What do you mean by that?
you are not going to notice battery degradation in just a few days of charging...
EDIT: i only notice now that i accidentally replied to a post from years ago, sorry for that...
To power up, you consume Red Bull. But your phone just needs its adaptive fast charger. Rate this thread to express how quickly the LG G6 can charge. A higher rating indicates that it charges extremely fast.
Then, drop a comment if you have anything to add!
I have used the charger that came with it (since it was the only USB-C cable I had at the time) and it charged amazingly fast. I bought a Wireless charger as well which is also amazingly fast. It's my first wireless charging experience and I was told it trickle charges so it would be much slower than charging from the cable, but I barely notice a difference in speed at all. I keep checking the phone what seems like every couple of minutes if not seconds and the % has increased by a lot more than I would have imagined. I thought wireless charging to be pointless and a who-cares ordeal, but not that I have experienced it... I don't think I will go back to a device without it (not for a phone at least). I'm not sure if any health issues can be there from radiation, but I'm almost dead anyway (well... I have about 50 years to go I guess) so I don't really care, lol.
For those wondering, I went with the CHOETECH Qi Model T513 wireless charger. Input: DC5V/2A (Max) Output: 7.5W which I purchased from Amazon for only $19.95. That was 50% off at the time I purchased it, but that was only a few days ago so you might want to check on it.
Really? I feel my g6 charges way slower then my S7 edge. I still have it but I'm gonna test this tomorrow.
---------- Post added at 09:45 AM ---------- Previous post was at 09:45 AM ----------
chinchillables said:
I have used the charger that came with it (since it was the only USB-C cable I had at the time) and it charged amazingly fast. I bought a Wireless charger as well which is also amazingly fast. It's my first wireless charging experience and I was told it trickle charges so it would be much slower than charging from the cable, but I barely notice a difference in speed at all. I keep checking the phone what seems like every couple of minutes if not seconds and the % has increased by a lot more than I would have imagined. I thought wireless charging to be pointless and a who-cares ordeal, but not that I have experienced it... I don't think I will go back to a device without it (not for a phone at least). I'm not sure if any health issues can be there from radiation, but I'm almost dead anyway (well... I have about 50 years to go I guess) so I don't really care, lol.
For those wondering, I went with the CHOETECH Qi Model T513 wireless charger. Input: DC5V/2A (Max) Output: 7.5W which I purchased from Amazon for only $19.95. That was 50% off at the time I purchased it, but that was only a few days ago so you might want to check on it.
Click to expand...
Click to collapse
Really? I feel my g6 charges way slower then my S7 edge. I still have it but I'm gonna test this tomorrow.
Went and picked up this bad boy today. LS variant. Out of the box, had 41%. Using my car charger Qualcomm Quick Charge 2.0(yes 2.0) and the included USB C, it charged to 70% in the 20 minute drive back to my house. For using the old QC tech, still charged amazingly fast. I have a QC3.0 39W wall charger that got delivered this afternoon. Will wait til this baby dies and charge her up with that and will report back.
Ive noticed when using a QC 3.0 charger and cable doesnt seem like the g6 is actually charging faster. Its suppose to support QC but its not.
I'm finding this charges a lot slower than my S7 Edge as well. Using the provided cable and charger it takes about 2.5 hours to go from 5% to full which is generally fine, but there isn't a burst and then trickle. I appreciated being able to plug my phone in for a short time when it was low and top it up enough to go out and not worry about it dying. Can't really do that with this one.
I had a power brick laying around and says qualcomm 2.0 and it charge`s really fast, like 1% of battery every min. , but yes with the stock charger brick takes forever to charge.
Using a Xiaomi USB C charger (45W) which supports both UPD 2.0 and QC 3.0, my phone charged very fast.
Mine charges super fast with the supplied charger. I plugged in with 11% yesterday and hit 50% in like 25 minutes.
quick charging is convenient and all, but is there a way to revert to normal charging? I don't want to accelerate my cycles. Thanks.
Sent from my LG-H870DS using Tapatalk
tagacapiz said:
quick charging is convenient and all, but is there a way to revert to normal charging? I don't want to accelerate my cycles. Thanks.
Sent from my LG-H870DS using Tapatalk
Click to expand...
Click to collapse
Use a non-QC charger.
thanks. I'll do that, I have to get extra cables anyway. Although I was wondering if there was a way to hack it phone-wise.
Sent from my LG-H870DS using Tapatalk
sharoon01 said:
I'm finding this charges a lot slower than my S7 Edge as well. Using the provided cable and charger it takes about 2.5 hours to go from 5% to full which is generally fine, but there isn't a burst and then trickle. I appreciated being able to plug my phone in for a short time when it was low and top it up enough to go out and not worry about it dying. Can't really do that with this one.
Click to expand...
Click to collapse
the charger that comes with the device doesn't support QC3, it's a QC2 charger.
so, getting a QC3 charger would defiantly decrease the charging time :good:
abdullahziad said:
the charger that comes with the device doesn't support QC3, it's a QC2 charger.
so, getting a QC3 charger would defiantly decrease the charging time :good:
Click to expand...
Click to collapse
I'm pretty sure the supplies charger is QC3.
vintagerock said:
I'm pretty sure the supplies charger is QC3.
Click to expand...
Click to collapse
Silly question - is there an easy way to tell if a charger is QC2 or QC3?
sharoon01 said:
Silly question - is there an easy way to tell if a charger is QC2 or QC3?
Click to expand...
Click to collapse
Look to the charger specification, if it supports only 5v and 9v then is QC2. QC3 scales on various voltage between 5 and 12 volts.
And yes, the provided charger is QC2, probably the same Found with the G5.
Yeah I take back what I said. The supplied charger does appear to "only" be QC 3. It still seems faster then QC2 though. Maybe it's just in my head. It works for my needs though, I can get almost 50% in like 20.
Charge in airplane mode when you can. When you have no worries of anyone calling or texting. With wifi off as well you'll see a decent jump in fast charging.
purchased by phone a couple of days back and it charged from 5% to 100% in approx 1.40 mins with the stock QC 2.0. I'm damn impressed....
Let me Ask y'all something. Coming from a LG G4 and just Charging My Batteries by a OEM Battery Charger I got 2HRs More of SOT. When I charge via the USB Quick Charger I got the same 3HRs as usual. So I got 5 while charging Slower then the SO-Called Quick Charging. To my understanding Batteries are meant to Slow-Charge rather then Fast