Elephone p9000 wont turn on - Elephone P9000 Questions & Answers

I was re flashing the latest update for the p9000. I started the procedure and removed the wire as i though i hadnt pressed download just before i removed the wire the progress bar turned red and was at 100%. Now my phone wont restart and has been like this for over a day. i have tried reflashing but nothing works. When i connect it to the pc it gets recognised and in device menu it comes up as mediatek usb usb vcom(com3)
please can anyone help

Have you tried flashing again whilst holding the vol+ button?

Pro4TLZZ said:
Have you tried flashing again whilst holding the vol+ button?
Click to expand...
Click to collapse
i have tried that and still no change norhing happens on flash tools. but pc makes a noise when its connected to pc.

Related

Xperia Z Tablet Bricked

Hey,
I have a problem. My tablet is SGP312 has Cyanogenmod 11 (FXP247 - Android 4.4). It was bricked when I type in Terminal:
Code:
su
reboot recovery
Was turned off and will not turn on at all.
Power button = NOTHING
Power button + Vol(+) 3/10/25 secs = NOTHING
Power button + Vol(-) 3/10/25 secs = NOTHING
Power button + Voll(+) + USB = NOTHING
No LED light, It's literally a paperweight. I can't even put it into Flashmode.
Please help me!
Anyone can help me?
WeRunTheNite said:
Anyone can help me?
Click to expand...
Click to collapse
Are you sure u can't put it in to flash mode, because that's the first thing I would do
Try putting it into fast boot mode
Hold volume up button and keep holding it and connect it to the pc
If you see blue light on your tablet, it means it has successfully entered fast boot mode
Make sure all the drivers are installed
Or
Follow the following procedures
Install Sony Ericsson flash tool and install all the drivers
Hold volume down button and keep holding it and connect it to pc
Once you hear the connecting sound our Any notification on your pc saying that it is connected, go ahead and flash the ftf file
hassanman1997 said:
Are you sure u can't put it in to flash mode, because that's the first thing I would do
Try putting it into fast boot mode
Hold volume up button and keep holding it and connect it to the pc
If you see blue light on your tablet, it means it has successfully entered fast boot mode
Make sure all the drivers are installed
Or
Follow the following procedures
Install Sony Ericsson flash tool and install all the drivers
Hold volume down button and keep holding it and connect it to pc
Once you hear the connecting sound our Any notification on your pc saying that it is connected, go ahead and flash the ftf file
Click to expand...
Click to collapse
When I hold volume up or volume down and connect it to PC, light turn on in red color. Flashtool says "device connected with usb debugging off" but tablet is off!
Driver
WeRunTheNite said:
When I hold volume up or volume down and connect it to PC, light turn on in red color. Flashtool says "device connected with usb debugging off" but tablet is off!
Click to expand...
Click to collapse
in my opinion, the drivers are not correctly installed
http://developer.sonymobile.com/downloads/drivers/xperia-tablet-z-sgp311-sgp312-driver/
go to the website and download and load the drivers on your pc
its just weird that it says device connected with Usb debugging off when it is actually powered off
try charging your device, maybe the battery needs to be charged leave it there for atleast 30 mins then try the steps
let us know if you fixed it or not
hassanman1997 said:
in my opinion, the drivers are not correctly installed
http://developer.sonymobile.com/downloads/drivers/xperia-tablet-z-sgp311-sgp312-driver/
go to the website and download and load the drivers on your pc
its just weird that it says device connected with Usb debugging off when it is actually powered off
try charging your device, maybe the battery needs to be charged leave it there for atleast 30 mins then try the steps
let us know if you fixed it or not
Click to expand...
Click to collapse
I have a similar problem, I've flashed plenty of devices before, never briked a thing.
By unloking the bootloader the data partition of my brand new tablet Z went corrupted. I've tried to flash several firmware but none was succesfull (couldn't format data...), and finally it get totally bricked! no light, nothing... I was not even able to put it in flash mode (no light ever!).
I've tried after a while, I've read with some other Xperia devices, it would be possible to recover it after some time, by letting the battery die, then use some rubber trick to keep vol- pressed... you can find it in XDA forums what I'm talking about. However after a month my tablet was still dead. no light, no nothing!
I've sent it to warranty and the just said that "an alternative firmware was flashed" (voiding the warranty) "and has rendered the logic board unusable".... and they have to order a new unit!!
I feel so surprise that even the cheapest chinese tablet have an harware mode that allow to reflash and resuscitate it back to factory... even if the firmware is completely screwed, and a 600$ tablet for a simple bootloader unlock got totaly bricked.
I wonder if there is an "hardware" way to recover the tablet (I saw it's pretty easy to tear down the Xperia tablet Z), by directly accessing the NAND... or by accessing some PIN (well I know sony would have not leaked such information)

bricked sony z3v (can only access fastboot)

usually when i mess this phone up i am able to use the companion to flash it back to stock. i tryed to flash magisk and now the light flashes when plugged into a power source and the phone does not turn on at all. if i hold volume up while turning on it boots into fastboot mode because i see the blue light and i was able to use flashtool and its fastboot tools to flash system.sin from stock firmware but that has not made a difference. i have tried to get it into download mode(upgrade mode) by holding volume down but it continues to boot loop. if the device is not plugged into power and i hold volume down and power it boots into recovery and i click both safe mode and factory reset but both turn the device off. any ideas?
ths is far from beeig bricked. go into twrp recovery and flash new rom. this should work.
It is just a dead mobile
TjNiko said:
ths is far from beeig bricked. go into twrp recovery and flash new rom. this should work.
Click to expand...
Click to collapse
mine is not doing anything but it only boots into fastboot mode.
my device : Z3v D6708
rooted
no twrp is able to accessed.
dead body which blinks red+green LED when plugged in....and shows a blue light in fastboot.
Inside the SD card / SIM card slot is a small orange or red button, press with a tooth pick or a pin untill you feel vibration and then try to reflash.
a recovery shouzld be aways present at fota my friend.
rockinroller said:
Inside the SD card / SIM card slot is a small orange or red button, press with a tooth pick or a pin untill you feel vibration and then try to reflash.
Click to expand...
Click to collapse
i held the button in the sim card slot until the phone vibrated but what's next? i tried the companion and flashtool but the only thing it lets me do is flash the system, which does not fix my problem still, what is that button?
TjNiko said:
a recovery shouzld be aways present at fota my friend.
Click to expand...
Click to collapse
the only recovery available is the stock one that says power off, safe mode, continue boot, factory reset... none of them do anything....this device does have a locked bootloader, it uses a recovery like many motorola's do... its a software recovery so its gone lol
You should be able to use flash tool to flash the proper ftf file for your device. That is what you are trying to do right?
rockinroller said:
You should be able to use flash tool to flash the proper ftf file for your device. That is what you are trying to do right?
Click to expand...
Click to collapse
yes, every time i try it asks to put the device is upgrade mode, which it can not do at the moment
logan71f100 said:
yes, every time i try it asks to put the device is upgrade mode, which it can not do at the moment
Click to expand...
Click to collapse
So, if you hit the flash button on flashtool, tick the flashmode and after preparing it asks you to power off your phone and plug your USB cable into your computer and then press the volume button "down" while plugging in the USB cable to your phone, It should enter flashmode and start a automated flash. This is not working?
rockinroller said:
So, if you hit the flash button on flashtool, tick the flashmode and after preparing it asks you to power off your phone and plug your USB cable into your computer and then press the volume button "down" while plugging in the USB cable to your phone, It should enter flashmode and start a automated flash. This is not working?
Click to expand...
Click to collapse
nope thats my problem, i only can access flashmode, when plugged in it just bootloops, it only goes into flash mode via the blue light
logan71f100 said:
nope thats my problem, i only can access flashmode, when plugged in it just bootloops, it only goes into flash mode via the blue light
Click to expand...
Click to collapse
I'm not understanding how it is bootlooping. Your phone should be off (power off) when holding down the volume button and plugging in the USB. Is your phone powering on at this point to bootloop? If so you might have hardware problems Is all I can think of.
rockinroller said:
I'm not understanding how it is bootlooping. Your phone should be off (power off) when holding down the volume button and plugging in the USB. Is your phone powering on at this point to bootloop? If so you might have hardware problems Is all I can think of.
Click to expand...
Click to collapse
the phone started bootlooping after flashing that zip. so that rules out hardware, and when i say boot loop i mean lights flash screen stays dark..im trying to figure out if there's a fancy way to fix this through fastboot
depends on wich ftf was used before and bootloader some of them can enter flashmode just by put on the otg cable
It was running 5.1.1 and it boots into fastboot when I hold volume up, but just lights and virbates when holding down for upgrade mode
Same problem. z3v, accidentally flashed a wrong firmware zip via TWRP.
Now if I push the power button, nothing happens.
A long push causes a short vibration and nothing else.
Yellow rest button does not change anything either.
If I connect it to the PC, the following happens: Red led lights up briefly, phone vibrates, green led lights up briefly; whole sequence cycles after that. Now the only thing I can do from there is hold volume up for a couple of seconds, then the phone enters fastboot mode. Blue led lights up continuously. Flashtool sees the phone in Fastboot mode.
However, where to go from here, I cannot see. Any advise?
I had this problem once. It might be your usb cable try a brand new one that rated for data also not just charging. I was trying to root my phone at work and it wouldnt work and when I got home I tried a different usb cable and it worked.,
s300pmu1 said:
Same problem. z3v, accidentally flashed a wrong firmware zip via TWRP.
Now if I push the power button, nothing happens.
A long push causes a short vibration and nothing else.
Yellow rest button does not change anything either.
If I connect it to the PC, the following happens: Red led lights up briefly, phone vibrates, green led lights up briefly; whole sequence cycles after that. Now the only thing I can do from there is hold volume up for a couple of seconds, then the phone enters fastboot mode. Blue led lights up continuously. Flashtool sees the phone in Fastboot mode.
However, where to go from here, I cannot see. Any advise?
Click to expand...
Click to collapse
I am no closer than when I posted this, until there is a bootloader unlock witch in theory can be done through fastboot, we are s.o.l.
logan71f100 said:
I am no closer than when I posted this, until there is a bootloader unlock witch in theory can be done through fastboot, we are s.o.l.
Click to expand...
Click to collapse
aaa,It's very easy.you can use flashtool to flash a new system. but you must be in green light.only it.you also can be flash.sure,if your phone can't get into system,it only loop at"SONY".You touch the power and the volume up and down. keep 7s. then the phone will get into 3E RECOVERY,you chosed power down.and then the phonwill be power off. Now you can flash you phone.
If you phone can't get into green light.you can use the tool Z3X easy tool to save your phone.or it will be a brick.
my phone cant be start.it have became a brick. Good luck
s300pmu1 said:
Same problem. z3v, accidentally flashed a wrong firmware zip via TWRP.
Now if I push the power button, nothing happens.
A long push causes a short vibration and nothing else.
Yellow rest button does not change anything either.
If I connect it to the PC, the following happens: Red led lights up briefly, phone vibrates, green led lights up briefly; whole sequence cycles after that. Now the only thing I can do from there is hold volume up for a couple of seconds, then the phone enters fastboot mode. Blue led lights up continuously. Flashtool sees the phone in Fastboot mode.
However, where to go from here, I cannot see. Any advise?
Click to expand...
Click to collapse
I have same problem if you resolve it please help

My Device isn't recognized by the pc and the fastboot or bootloader mode don't work

I know that this thread is more of same, but I didn't found any answer that helps me.
The story is:
My Xperia 2363 M4 Aqua Dual recived a call and I lost it. Then when I took it and turn on the screen to see the caller, my device just restarted and went to the purple waves screen, but stuck there the system didn't start. Since this, the only thing that phone do is that, it never starts the android system.
I've tried everything that I read
So the things I've tried is:
Restart the phone by holding the power + vol up buttons
Turn off the phone by holding the power + vol up buttons until 3 vibes
Turn on the phone holdin the vol up + vol down buttons
Reinstall software by xperia companion but the software didn't start the process
reinstall software by flashtool but the device isn't found by the flashtool
connect the phone on pc holding vol up button
connect the phone on pc holding vol down button
connect the phone on pc holding vol up + vol down buttons
connect the phone holding all the buttons
the fastboot and bootloader modes don't enter and the pc says that usb device can't recognized by the windows.
I have no ideas of what i do
Can you help me?
Does it flash a blue screen briefly before restarting / crashing?
DarkerJava said:
Does it flash a blue screen briefly before restarting / crashing?
Click to expand...
Click to collapse
Thanks for reply. No, didn't flash a blue screen, it just restarted like when we hold the power +vol up buttons
And it not keep restartin, the phone turns on and stays on the waves screen. don't start the system so as don't restart.
If you device is not being recognized by you PC, Try fastbooting the device using a linux (Mint, what i used for similiar issue), it will hopefully recognize your device and you would be able to flash it.
sanjyot said:
If you device is not being recognized by you PC, Try fastbooting the device using a linux (Mint, what i used for similiar issue), it will hopefully recognize your device and you would be able to flash it.
Click to expand...
Click to collapse
Thank You, I'll try this.
sanjyot said:
If you device is not being recognized by you PC, Try fastbooting the device using a linux (Mint, what i used for similiar issue), it will hopefully recognize your device and you would be able to flash it.
Click to expand...
Click to collapse
I tried this one, but, is the phone that not enter on fastboot mode. I tried with my another devices and it worked well, but the M4 aqua, just refuse to enter in fastboot mode and only recharge the batt. to be more specifc, the green or blue lights don't lights
korkinova said:
I tried this one, but, is the phone that not enter on fastboot mode. I tried with my another devices and it worked well, but the M4 aqua, just refuse to enter in fastboot mode and only recharge the batt. to be more specifc, the green or blue lights don't lights
Click to expand...
Click to collapse
could you fix that problem bro?
advancel said:
could you fix that problem bro?
Click to expand...
Click to collapse
Unfortunately no. I couldn't fix this yet, it is because I' can't go fastboot mode on my device
have you any other suggestion?
no i have that problem by the way if you can fix the prob. then contact me pls
The other phone you tried was a Xperia?
And are you on Win8 or Win10 because if you are, you have to install the drivers in unsafe mode(Don't remember how it's really called).
Furthermore if you don't have anything important in the phone try flashing a new version of Android or the same but do a clean install I.E Wipe everything and leave like new by installing with Flashtool(unsafe mode too, because it needs drivers if you are on Win8>10 when installing)

problem while flashing

Hi,my xperia z2 got freezed so i restart it by pressing power off button and volume down after that its keep on struck at bootloader and not getting start.when i connect it with laptop its charging too but when i try to flash it on flashmode and it says turn off device and connect it again while pressing volume button it shows no process..just one red light blink then green for one second after that nothing.how to flash it?what to do next?
Install flash mode drivers.
iXaidyiu said:
Install flash mode drivers.
Click to expand...
Click to collapse
it is installed already but still cant detect the phone.when flashing says remove your phone and press the volume down and connect it again? and when i do that there will be one blink of red light thats all.not even charging but if i remove the usb and again connect it to laptop its charging again.what to do? thanks
Brij08 said:
it is installed already but still cant detect the phone.when flashing says remove your phone and press the volume down and connect it again? and when i do that there will be one blink of red light...
Click to expand...
Click to collapse
That's normal, the device has to be calibrated for the first time when you connected it to the computer.
And not charging in flash mode is yet no more than normal.
iXaidyiu said:
That's normal, the device has to be calibrated for the first time when you connected it to the computer.
And not charging in flash mode is yet no more than normal.
Click to expand...
Click to collapse
i know but i m struck at the wait for flashmode pop up..flash process is not happening and it seems like flashtool cant detect my phone.
Brij08 said:
i know but i m struck at the wait for flashmode pop up..flash process is not happening and it seems like flashtool cant detect my phone.
Click to expand...
Click to collapse
Reinstall drivers or use another PC to flash.
Brij08 said:
Hi,my xperia z2 got freezed so i restart it by pressing power off button and volume down after that its keep on struck at bootloader and not getting start.when i connect it with laptop its charging too but when i try to flash it on flashmode and it says turn off device and connect it again while pressing volume button it shows no process..just one red light blink then green for one second after that nothing.how to flash it?what to do next?
Click to expand...
Click to collapse
try use other usb cable . its happen to me too , then i changed my usb cable and flashed ...

Ulefone T1 Hard bricked * Not Charging + Vcom Port Disconnect*

When I tried to root my Ulefone T1 (MT6757T) it got hard bricked. Only Red LED light lights up while plugging USB cable. and also it frequently changes from Vcom, MTP, mode. So, I'm not able to perform a full software flash. The device neither jump to Download/ Fastboot mode and nor to Recovery. Also nothing happens after long pressing power button except toggle sound from PC if it connected to it. Please help me out to unbrick my Ulefone T1.
I do not have that phone but have you tried draining the battery completely? and then give it a light charge see if it goes into download mode using the right button combo?
HisEvilness said:
I do not have that phone but have you tried draining the battery completely? and then give it a light charge see if it goes into download mode using the right button combo?
Click to expand...
Click to collapse
As I saw most MediaTek phones flashes firmware in switch off mode. Mine also it directly catches up by SP flash while in switch off position. I think there will be a universal method for MTK devices. But, I can't find out. Anyway I will try this method. And will update the result soon.
MajjuBhai said:
When I tried to root my Ulefone T1 (MT6757T) it got hard bricked. Only Red LED light lights up while plugging USB cable. and also it frequently changes from Vcom, MTP, mode. So, I'm not able to perform a full software flash. The device neither jump to Download/ Fastboot mode and nor to Recovery. Also nothing happens after long pressing power button except toggle sound from PC if it connected to it. Please help me out to unbrick my Ulefone T1.
Click to expand...
Click to collapse
Any news?
vittore.zen said:
Any news?
Click to expand...
Click to collapse
I opted for another phone.

Categories

Resources