Hi.
So the latest Cyanogenmod (honestly every update out of the CM update that came out on 9th Oct) builds do not work for my device. Whenever I try to boot up the device, the device just gets stuck on the bootup screen, that is the screen where you see the OnePlus logo and there's text in the lower part that says "Powered by Android", except that there is no "powered by Android" text seen.
What should I do in order to get things working?
Sorry to post this in the general thread, I am not yet high enough that I can post in the Android Development Thread.
The latest 2 builds are only compatible with the new Marshmallow Bootloader, AFAIK.
In order to get them working, I would recommend you to flash the full OOS 3.1.3 zip file.
There is the alternative to flash a zip file to get the latest booloader and radio firmware. I haven't tested it, that's why I'm not telling you to do so.
Loureiro said:
The latest 2 builds are only compatible with the new Marshmallow Bootloader, AFAIK.
In order to get them working, I would recommend you to flash the full OOS 3.1.3 zip file.
There is the alternative to flash a zip file to get the latest booloader and radio firmware. I haven't tested it, that's why I'm not telling you to do so.
Click to expand...
Click to collapse
I currently am running the CM 13.0 2016-10-09 build which works like it should. So should I switch to OOS 3.1.3 and then flash the new CM build?
aamodjoshi23 said:
I currently am running the CM 13.0 2016-10-09 build which works like it should. So should I switch to OOS 3.1.3 and then flash the new CM build?
Click to expand...
Click to collapse
Yes. Just like that. But OOS 3.X.X has new Bootloader. So new TWRP should be flashed.
New TWRP : http://forum.xda-developers.com/oneplus-x/development/unofficial-twrp-3-0-2-0-recovery-onyx-t3471584
And flash it as usual.
sundhar88 said:
Yes. Just like that. But OOS 3.X.X has new Bootloader. So new TWRP should be flashed.
New TWRP : http://forum.xda-developers.com/oneplus-x/development/unofficial-twrp-3-0-2-0-recovery-onyx-t3471584
And flash it as usual.
Click to expand...
Click to collapse
Alright thanks! If I face any problems I'll post again!
aamodjoshi23 said:
Alright thanks! If I face any problems I'll post again!
Click to expand...
Click to collapse
Wait dude! If you're on OOS 2.X.X based ROM and TWRP, then you should flash official OxygenOS Recovery and then flash the Marshmallow ROM. And now you can flash TWRP root or flash CM13 or xposed and whatever...
Refer : http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
sundhar88 said:
Wait dude! If you're on OOS 2.X.X based ROM and TWRP, then you should flash official OxygenOS Recovery and then flash the Marshmallow ROM. And now you can flash TWRP root or flash CM13 or xposed and whatever...
Refer : http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
Click to expand...
Click to collapse
Yup. You need to first flash the OOS recovery and then you need to flash the OOS 3.1.3 and then again the TWRP and then you need to flash whichever ROM you want to... Been there, done that. Real pain...
aamodjoshi23 said:
I currently am running the CM 13.0 2016-10-09 build which works like it should. So should I switch to OOS 3.1.3 and then flash the new CM build?
Click to expand...
Click to collapse
That's right.
If you don't want to do a complete wipe, you can try this method: http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
Loureiro said:
That's right.
If you don't want to do a complete wipe, you can try this method: http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
Click to expand...
Click to collapse
You're a lifesaver dude! Thanks for the link!!
Hi all,
I’m having the exact same problem. I’ve searched several forums, and have seen different solutions, but I’m unsure what solution to follow. The steps in this thread seem the most logical to me. But just to be clear, are this the steps I have to follow, in the correct order? I don’t want to make any mistakes. I’m currently on OOS 2.2.2 with TWRP 3.0.2.0.
(make backup, I’m wiping the whole thing)
Copy OPX_recovery and OOS 3.1.3 to phone
Flashboot flash OPX_recovery.img (Lollipop version, not MM)
Reboot (to bootloader?)
Flashboot flash OOS 3.1.3 (from pc or from bootloader?)
Wipe Dalvik/cache
Reboot (to bootloader?)
Flash twrp-3.0.2-0-onyx-20161020-085152.img as found in post from sundhar88
Flash latest CM13
Wipe Dalvik/cache
Reboot in normal mode
Should I download and keep the CM13 recovery version too?
Your reply would be massively appreciated!
Cretandus said:
Hi all,
I’m having the exact same problem. I’ve searched several forums, and have seen different solutions, but I’m unsure what solution to follow. The steps in this thread seem the most logical to me. But just to be clear, are this the steps I have to follow, in the correct order? I don’t want to make any mistakes. I’m currently on OOS 2.2.2 with TWRP 3.0.2.0.
(make backup, I’m wiping the whole thing)
Copy OPX_recovery and OOS 3.1.3 to phone
Flashboot flash OPX_recovery.img (Lollipop version, not MM)
Reboot (to bootloader?)
Flashboot flash OOS 3.1.3 (from pc or from bootloader?)
Wipe Dalvik/cache
Reboot (to bootloader?)
Flash twrp-3.0.2-0-onyx-20161020-085152.img as found in post from sundhar88
Flash latest CM13
Wipe Dalvik/cache
Reboot in normal mode
Should I download and keep the CM13 recovery version too?
Your reply would be massively appreciated!
Click to expand...
Click to collapse
No need for you to do this.
Just follow this guide http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917 and then flash latest CM13 nightly.
Adesh15 said:
No need for you to do this.
Just follow this guide http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917 and then flash latest CM13 nightly.
Click to expand...
Click to collapse
Okay, thanks! I'll try this and let you know the outcome. I have to install CM13 before rebooting out of TWRP, right? "Older roms won't boot" meaning my OOS 2.2.2 won't boot. Just checking...
Cretandus said:
Hi all,
I’m having the exact same problem. I’ve searched several forums, and have seen different solutions, but I’m unsure what solution to follow. The steps in this thread seem the most logical to me. But just to be clear, are this the steps I have to follow, in the correct order? I don’t want to make any mistakes. I’m currently on OOS 2.2.2 with TWRP 3.0.2.0.
(make backup, I’m wiping the whole thing)
Copy OPX_recovery and OOS 3.1.3 to phone
Flashboot flash OPX_recovery.img (Lollipop version, not MM)
Reboot (to bootloader?)
Flashboot flash OOS 3.1.3 (from pc or from bootloader?)
Wipe Dalvik/cache
Reboot (to bootloader?)
Flash twrp-3.0.2-0-onyx-20161020-085152.img as found in post from sundhar88
Flash latest CM13
Wipe Dalvik/cache
Reboot in normal mode
Should I download and keep the CM13 recovery version too?
Your reply would be massively appreciated!
Click to expand...
Click to collapse
Install opx_recovery, flash 3.1.3 from recovery. After installed you can fastboot flash Blu sparks latest or Nichets twrp done.
Cretandus said:
Okay, thanks! I'll try this and let you know the outcome. I have to install CM13 before rebooting out of TWRP, right? "Older roms won't boot" meaning my OOS 2.2.2 won't boot. Just checking...
Click to expand...
Click to collapse
After flashing the new TWRP for new BL you should reboot to recovery from reboot tab in TWRP.
Then wipe System ,Data and Cache and then flash CM13
Cretandus said:
Hi all,
I�¢??m having the exact same problem. I�¢??ve searched several forums, and have seen different solutions, but I�¢??m unsure what solution to follow. The steps in this thread seem the most logical to me. But just to be clear, are this the steps I have to follow, in the correct order? I don�¢??t want to make any mistakes. I�¢??m currently on OOS 2.2.2 with TWRP 3.0.2.0.
(make backup, I�¢??m wiping the whole thing)
Copy OPX_recovery and OOS 3.1.3 to phone
Flashboot flash OPX_recovery.img (Lollipop version, not MM)
Reboot (to bootloader?)
Flashboot flash OOS 3.1.3 (from pc or from bootloader?)
Wipe Dalvik/cache
Reboot (to bootloader?)
Flash twrp-3.0.2-0-onyx-20161020-085152.img as found in post from sundhar88
Flash latest CM13
Wipe Dalvik/cache
Reboot in normal mode
Should I download and keep the CM13 recovery version too?
Your reply would be massively appreciated!
Click to expand...
Click to collapse
Hi there.
I tried the way these folks suggested, by updating the BL using the zip file and flashing the updated TWRP recovery, and it worked!
What I did was, first of all, I took the backup using Titanium Backup and took a nandroid backup. Then I already had downloaded the files required, that is the BL zip file, the TWRP recovery, and the latest CM 13.0 build. Then I went to recovery > install and then located the BL and flashed it. Then I tried to flash the TWRP recovery but it didn't. Gave an error saying, "Unsuccessful" or something on those lines.
So I took that TWRP img file and copied it on my laptop. Then I went into the bootloader, which at first I thought was a bad idea since I just flashed the BL zip, then I flashed the new TWRP img file and went to recovery mode. And it had worked. So I flashed the CM 13.0 build too and then booted up the device, and it worked!
I guess that should help
aamodjoshi23 said:
Hi there.
I tried the way these folks suggested, by updating the BL using the zip file and flashing the updated TWRP recovery, and it worked!
Click to expand...
Click to collapse
I'm glad it worked for(don't forget to drop a thanks and a vote would be good too)
Also for next time,please search the forums before creating a thread.:angel:
Adesh15 said:
After flashing the new TWRP for new BL you should reboot to recovery from reboot tab in TWRP.
Then wipe System ,Data and Cache and then flash CM13
Click to expand...
Click to collapse
Adesh15, it worked! Thank you very much!
Cretandus said:
Adesh15, it worked! Thank you very much!
Click to expand...
Click to collapse
Great !
Is there any way to flash miui through twrp instead of miflash?
Yeah. The same way as any other ROM.
downloaded zip from miui site and ended up with errors like firmware not found while installing in twrp
rxlord said:
downloaded zip from miui site and ended up with errors like firmware not found while installing in twrp
Click to expand...
Click to collapse
:/ Give us the link to what you downloaded. Flashing through TWRP works just fine here.
Did you guys see the no os installed message?
no os installed message was there and it ended in a bootloop.When tried to format again vibrated and bootlooped
You have to use Lazy Flasher: h++p://c.mi.com/thread-31082-1-1.html
Alternatively you could use this fix: h++p://xiaomitips.com/guide/how-to-repack-miui-fastboot-image/
It works just fine. I flashed stock miui using twrp yesterday. Make sure to flash recovery rom not fastboot rom
I am on Global stable miui 8.2.4 but for some reasons i don't like it and i wanna downgrade to 8.1.15 . I have Twrp installed and rooted . Can i flash recovery 8.1.15 rom using twrp ?
Or i need to flash a fastboot rom using twrp ?
somebody?
I have flashed stock 8.2.4.0 from 8.2.2.0 with flashfire, although I have twrp too. No problems just put the zip in right folder.
Yes you can. I have flashed both dev and stable. @jazzh mentions something about folders. TWRP doesn't really care about that.
Be warned though that flashing the official zip also replaces the recovery and there is a bug with 8.1.15 where you cannot flash TWRP back afterwards.
If you go back to 8.1.15 and want to use TWRP for flashing a custom rom simply use
fastboot boot [recovery name].img
to soft load TWRP and do all your work from there up.
Yes, that's a good advice.
I soft boot twrp whenever performing backup or updating magisk.
I just mentioned folders because flashfire is started from os and it will look into the ota folder and if it finds the zip it will offer rebooting to perform the update.
Hello guys,
I have the SGP321 running on android 5.1.1. It is rooted with SuperSU and I installed TWRP via [NUT]'s XZDualRecovery. When I try to flash Resurrection Remix (same error with LineageOS 14.1 btw) the installation fails with error: execute updater binary in zip. Two lines above (but not in red text) it says that this rom is meant to be installed on a SGP321 (which I have) but my device is a [empty space]. I don't know if this has something to do with the mentioned error. A Google search led me to posts with the same error, but mostly on the OP One and the Moto G4. They say that you have to update the bootloader. Has anyone experienced the same problems with their Xperia TabZ and has found a solution to this?
Edit: TWRP Log https://i.imgur.com/418FJx2.jpg
julius1504 said:
Hello guys,
I have the SGP321 running on android 5.1.1. It is rooted with SuperSU and I installed TWRP via [NUT]'s XZDualRecovery. When I try to flash Resurrection Remix (same error with LineageOS 14.1 btw) the installation fails with error: execute updater binary in zip. Two lines above (but not in red text) it says that this rom is meant to be installed on a SGP321 (which I have) but my device is a [empty space]. I don't know if this has something to do with the mentioned error. A Google search led me to posts with the same error, but mostly on the OP One and the Moto G4. They say that you have to update the bootloader. Has anyone experienced the same problems with their Xperia TabZ and has found a solution to this?
Edit: TWRP Log https://i.imgur.com/418FJx2.jpg
Click to expand...
Click to collapse
Recovery 2.8.7.0 is not compatible with with the lastest custom firmwares like android 7.1.2 or 8.1.
To flash them successfully you need to flash recovery version at least 3.2.1.x to your device.
Rootk1t said:
Recovery 2.8.7.0 is not compatible with with the lastest custom firmwares like android 7.1.2 or 8.1.
To flash them successfully you need to flash recovery version at least 3.2.1.x to your device.
Click to expand...
Click to collapse
Good to know, thank you! How can I flash the newer version of TWRP? I tried to flash via Fastboot but get the error "FAILED (remote: Command not allowed)". I think this is because Sony's devices don't have a recovery partition.
julius1504 said:
Good to know, thank you! How can I flash the newer version of TWRP? I tried to flash via Fastboot but get the error "FAILED (remote: Command not allowed)". I think this is because Sony's devices don't have a recovery partition.
Click to expand...
Click to collapse
Use Rashr tool.
Download twrp.img from the link above. Flash it to recovery via Rashr and reboot. After you can enter it via Vol+ on boot.
Rashr says I need a FOTA kernel partition, how do I get that? Thank you for your help, hope that this was my last question
EDIT:
OK I tried different things with Rashr. I uninstalled XZDualRecovery with the flashable zip and flashed full stock rom 5.1.1 with Flashtool and rooted it again. I was not able to install the latest twrp by any means using Rashr.
I found another solution:
1. I installed (again) XZDualRecovery and booted into TWRP 2.8
2. I flashed the Marshmallow Version of Resurrection Remix (https://forum.xda-developers.com/xp...pment/rom-resurrection-remix-m-5-7-3-t3440876) --> This installed the CM-Recovery (Vol-) AND TWRP 3.2.1 (Vol+)
3. Booted into TWRP 3.2.1
4. Successfully flashed an Android 8.1 Rom
which recovery is compatible with the android 8.1 custom roms?
the linked one in the threads doesnt work for me
The Siriuz Recovery
Yeahmään said:
which recovery is compatible with the android 8.1 custom roms?
the linked one in the threads doesnt work for me[/QUOTE
You need to search SiruZ ROM por MorfuZ ROM and download that recovery, im in CrDroid but by Dark you need to delete some línes un update-script
Click to expand...
Click to collapse
do you mean this one and it works? RECOVERY TWRP Mod by catuva21 or this one? TWRP3.2.1 Oreo Mod Catuva21
both are from siriuz and morphuz
edit: i flashed the recovery from siriuz/morphuz (both the same) and when i try to flash crdroid rom it says
"updater process ended with error: 7
error installing zip file"
what does that mean?
can you upload the recovery which you edited so i can flash it after that i will flash crdroid like you