I am on Global stable miui 8.2.4 but for some reasons i don't like it and i wanna downgrade to 8.1.15 . I have Twrp installed and rooted . Can i flash recovery 8.1.15 rom using twrp ?
Or i need to flash a fastboot rom using twrp ?
somebody?
I have flashed stock 8.2.4.0 from 8.2.2.0 with flashfire, although I have twrp too. No problems just put the zip in right folder.
Yes you can. I have flashed both dev and stable. @jazzh mentions something about folders. TWRP doesn't really care about that.
Be warned though that flashing the official zip also replaces the recovery and there is a bug with 8.1.15 where you cannot flash TWRP back afterwards.
If you go back to 8.1.15 and want to use TWRP for flashing a custom rom simply use
fastboot boot [recovery name].img
to soft load TWRP and do all your work from there up.
Yes, that's a good advice.
I soft boot twrp whenever performing backup or updating magisk.
I just mentioned folders because flashfire is started from os and it will look into the ota folder and if it finds the zip it will offer rebooting to perform the update.
Related
Hi,
I try to installiert the newest beta, I install cofface twrp and alka twrp. I get an error if I want to install a Miui with one of this Twrp's.
I read much threads Form Here but I cant find any reason for this. I'm now on Cm13.
best regards
Try to format each of your partition like system, data, cache & dalvik/art cache. I do this yesterday and sucsess to flash miui eu rom from cm.
Good luck.
The reason is recent marshmallow roms are encrypted
Unless you patch your boot.img or rollback to android 5.1.1 base again, you cant flash via TWRP
I do that every time when I flash anything with TWRP, which TWRP have you used?
How can I patch the boot.img? If I rollback to global miui, I have to reboot to edl mode via adb and use miflash?
If you are not using Cofface Twrp, then flash patched boot image, i recommend use official TWRP, just flash the recovery rom and then flash "lazyflasher.zip" google it.
I am on latest global with 5.1 base. If I'll flash the beta (6.0.1 base) and then the lazyflasher, I think I would not be encrypted but in a locked bootloader. Am I rt?
Hello guys
I was on stock android and stock recovery oos 3.1.3. I tried to change recovery using fastboot so i tried so many recovries, but unable to flash anyone then i found twrp recovery by teamspark so i flashed it and successfully done, but problem with it is, i am not able toh flash paranoid rom and stock rom using this recovery and even the stock recovery is also not flashable now, just stuck on logo whenever i flash stock recovery. So which recovery i can use which can correctly flashable and i can flash paranoid rom by that successfully.
Thanks in advance.
Flash old stock recovery followed by any OOS 2.X.X firmware . Now you can proceed with PA. Note dont use any of the twrp's designed for mm bootloader.
Rajatdembla said:
Hello guys
I was on stock android and stock recovery oos 3.1.3. I tried to change recovery using fastboot so i tried so many recovries, but unable to flash anyone then i found twrp recovery by teamspark so i flashed it and successfully done, but problem with it is, i am not able toh flash paranoid rom and stock rom using this recovery and even the stock recovery is also not flashable now, just stuck on logo whenever i flash stock recovery. So which recovery i can use which can correctly flashable and i can flash paranoid rom by that successfully.
Thanks in advance.
Click to expand...
Click to collapse
First of all, you have to downgrade your bootloader. Then you can flash any recovery for the old bootloader.
Thanks i m done now
Exodusche said:
Flash old stock recovery followed by any OOS 2.X.X firmware . Now you can proceed with PA. Note dont use any of the twrp's designed for mm bootloader.
Click to expand...
Click to collapse
Thank you so much brother now i m able to flash.
Hey guys.
I'm using a 32/3GB kenzo with an unlocked bootloader running official rr mm.
I formatted the phone, flashed CM14 firmware, flashed the official RR nougat and GAPPS, then rebooted to system.
At this point, it started bootlooping, booting to the MI splashscreen, staying there for about half the time it usually does, before rebooting and repeating the process.
At this point, I was unable to access recovery, but was able to access fastboot and edl.
Flashing a recovery using the "fastboot flash recovery" command failed, so I assume that the partitions were corrupted.
I had to revert to MIUI by flashing through edl using MI flash, which fixed all the issues.
Can someone tell me what I did wrong?
Or should I follow the newbie guide 2.0 from the forums?
Thanks in advance to anyone who replies.
Ivanlai said:
Hey guys.
I'm using a 32/3GB kenzo with an unlocked bootloader running official rr mm.
I formatted the phone, flashed CM14 firmware, flashed the official RR nougat and GAPPS, then rebooted to system.
At this point, it started bootlooping, booting to the MI splashscreen, staying there for about half the time it usually does, before rebooting and repeating the process.
At this point, I was unable to access recovery, but was able to access fastboot and edl.
Flashing a recovery using the "fastboot flash recovery" command failed, so I assume that the partitions were corrupted.
I had to revert to MIUI by flashing through edl using MI flash, which fixed all the issues.
Can someone tell me what I did wrong?
Or should I follow the newbie guide 2.0 from the forums?
Thanks in advance to anyone who replies.
Click to expand...
Click to collapse
Which recovery you uaed for flashing rr n. Because you went bootloop and recovery was not able to access that means may be some problems in recovery or either in rom/gapps zip. Make sure you are flashing gapps for NOUGAT only. And use latest stable miui firmware (not cm14 zip one although may be both are same)
Try this
1. Flash zcx recovery (I recommend this, never disappointed)
2. Flash latest miui stable firmware
3. Flash rom zip
4. Flash gapps n
Boot to system
5. Then flash kernel or anything.
Apcoolboy said:
Which recovery you uaed for flashing rr n. Because you went bootloop and recovery was not able to access that means may be some problems in recovery or either in rom/gapps zip. Make sure you are flashing gapps for NOUGAT only. And use latest stable miui firmware (not cm14 zip one although may be both are same)
Try this
1. Flash zcx recovery (I recommend this, never disappointed)
2. Flash latest miui stable firmware
3. Flash rom zip
4. Flash gapps n
Boot to system
5. Then flash kernel or anything.
Click to expand...
Click to collapse
Thanks for the reply, I'll try it soon. Can you tell me how to get the miui stable firmware?
Should I fastboot flash latest MIUI stable before flashing the ROM or is there a MIUI firmware zip file to flash?
Ivanlai said:
Thanks for the reply, I'll try it soon. Can you tell me how to get the miui stable firmware?
Should I fastboot flash latest MIUI stable before flashing the ROM or is there a MIUI firmware zip file to flash?
Click to expand...
Click to collapse
There is flashable zip file which is extracted from miui rom only. So both way will be good as flash latest stable miui rom and then twrp > rom zip > gapps. Or twr0 > firmware zip (search in any custom rom thread you will get one) > custom rom zip > gapps.
Only benefit of flashing firmware zip is less time consuming and less file size (around 50mb) compare to full miui rom.
Ivanlai said:
Thanks for the reply, I'll try it soon. Can you tell me how to get the miui stable firmware?
Should I fastboot flash latest MIUI stable before flashing the ROM or is there a MIUI firmware zip file to flash?
Click to expand...
Click to collapse
https://forum.xda-developers.com/redmi-note-3/development/firmware-hmnote3proglobal-t3574361
Ivanlai said:
Hey guys.
I'm using a 32/3GB kenzo with an unlocked bootloader running official rr mm.
I formatted the phone, flashed CM14 firmware, flashed the official RR nougat and GAPPS, then rebooted to system.
At this point, it started bootlooping, booting to the MI splashscreen, staying there for about half the time it usually does, before rebooting and repeating the process.
At this point, I was unable to access recovery, but was able to access fastboot and edl.
Flashing a recovery using the "fastboot flash recovery" command failed, so I assume that the partitions were corrupted.
I had to revert to MIUI by flashing through edl using MI flash, which fixed all the issues.
Can someone tell me what I did wrong?
Or should I follow the newbie guide 2.0 from the forums?
Thanks in advance to anyone who replies.
Click to expand...
Click to collapse
unlock your bootloader again it will run without problem..
EDIT: I figured it out myself, for anyone else in the same situation: I downloaded the proper Stock Rom for my phone and just flashed it with fastboot flash, no custom recovery was needed. After that I simply flashed Lineage OS and it's working like a charm.
Hello, I recently switched back to an Android phone that's why I'm a bit rusty. I successfuly installed Resurrection Remix on my Huawei P20 Lite.
After realizing there is no Notch support I decided to go back to stock or switch to Lineage OS.
Now I have two questions:
1) On the OpenKirin page it says you need stock EMUI 8.0 before you apply one of their ROMs. Does this mean if I want to switch to Lineage OS I need to go back to stock EMUI or can I go from RR to Lineage?
2) I downloaded 'Huawei P20 Lite-ANE-LX1 8.0.0.144(C432).zip' from xda which is supposed to be the stock rom. In the instructions on here it says I need to install TWRP. However OpenKirin says their ROMs don't work with TWRP. Can I just flash the stock firmware with adb fastboot, like described in the OpenKirin FAQ?
So my question basically is, what do I have to do to go from RR with stock recovery back to stock EMUI?
im in the same problem.. my fone brick in twrp logo.... i dont know how pass this logo
You can use eRecovery to download the entire ROM, you need the stock recovery and flash it with fastboot (fastboot flash recovery_ramdisk recovery_ramdisk.img) then go to the recovery mode and download the rom using WiFi and that's all, as advice I recomend you always make a system backup in the sdcard using TWRP. Sorry for my bad english. You can dowload the recovery here
Dre0x said:
You can use eRecovery to download the entire ROM, you need the stock recovery and flash it with fastboot (fastboot flash recovery_ramdisk recovery_ramdisk.img) then go to the recovery mode and download the rom using WiFi and that's all, as advice I recomend you always make a system backup in the sdcard using TWRP. Sorry for my bad english. You can dowload the recovery here
Click to expand...
Click to collapse
Thanks... i made this and everything ok now
illyx said:
EDIT: I figured it out myself, for anyone else in the same situation: I downloaded the proper Stock Rom for my phone and just flashed it with fastboot flash, no custom recovery was needed. After that I simply flashed Lineage OS and it's working like a charm.
Click to expand...
Click to collapse
What file did you flash in fastboot, the full-ota file?
I have the MIUI Global Developer ROM installed, and I've also flashed the Disable-Dmverity and Magisk v19. As I have TWRP instead of the stock recovery, I cannot update the ROM through the updater, as it will go into TWRP and reboot at the splash screen, without the update being carried out. If I flash back the original boot.img (I did flash the original recovery.img, but it still doesn't work), will I lose Magisk root? Otherwise, I'd have to download the ROM zip every time a new version comes out and flash it with TWRP, which isn't a problem for me, but I like the convenience of the updater