Hi
Im installed cm13 in kiw-l21c185b310 and cm recovery
Phone base marshmallow but when release ota update for rom Im try to install but phone reboot cm recovery and install aborted?why?anyone can help me for fix the problem
Not sure if this is your problem, but my OTA update failed, apparently you need the CM recovery for it to work. Mine never booted after an OTA upgrade.
Deleted
Sent from my KIW-L21 using Tapatalk
jemez said:
Not sure if this is your problem, but my OTA update failed, apparently you need the CM recovery for it to work. Mine never booted after an OTA upgrade.
Click to expand...
Click to collapse
I use TWRP and have never had an issue with CM13 OTA updates.
JT-on said:
I use TWRP and have never had an issue with CM13 OTA updates.
Click to expand...
Click to collapse
FWIW, I upgraded OTA once or twice with no problems, but then after another upgrade it hung on the boot screen. When that happened someone else reported the same thing on the CM13 discussion, so it may have been isolated to a particular build.
Related
New firmware is out NJ6. I can't get the OTA yet but it is available from KIES. Hopefully this will solve all of my signal issues.
I saw this on sammobile as well...most likely this will close the current root loophole...will wait patiently until an awesome developer can create a rooted 4.4.4 rom.
Yes, I did lose root but that is okay with me if it helps my signal. Haven't been able to test it in problem areas yet.
murmur70 said:
Yes, I did lose root but that is okay with me if it helps my signal. Haven't been able to test it in problem areas yet.
Click to expand...
Click to collapse
Have you tried to root again with towel root?
Towel Root no longer works, I tried it after I updated...
The-Beast said:
Towel Root no longer works, I tried it after I updated...
Click to expand...
Click to collapse
Thanks!
Sent from my Nexus 7 using Tapatalk
I am cautiously optimistic that my signal is much improved.
Sent from my SM-T700 using XDA Free mobile app
I actually have 4.4.4 rooted right now on my device but safestrap doesn't work properly now. It starts to load but then reboots into OS.
The first 4.4.4 rom I made would boot, but only had a black screen (kernel modules didn't match boot.img), then I tried the nj6 boot.img and got the warning about unauthorized kernel. So, I decided to try one more thing. I reflashed the pre-rooted 4.4.4 rom I made and then flashed all of the 4.4.4 firmware in Odin EXCEPT for the system partition. This allowed me to boot into my rooted nj6 4.4.4 rom.
gr8nole said:
I actually have 4.4.4 rooted right now on my device but safestrap doesn't work properly now. It starts to load but then reboots into OS.
The first 4.4.4 rom I made would boot, but only had a black screen (kernel modules didn't match boot.img), then I tried the nj6 boot.img and got the warning about unauthorized kernel. So, I decided to try one more thing. I reflashed the pre-rooted 4.4.4 rom I made and then flashed all of the 4.4.4 firmware in Odin EXCEPT for the system partition. This allowed me to boot into my rooted nj6 4.4.4 rom.
Click to expand...
Click to collapse
Ain't gonna lie ... a lot of that went right over my head; but I'm excited about it anyway LOL :good:
How do I get it on my phones have 2 Note 3's in my house. It's not available on Kies or OTA in my Texas area. Not rooted phones.. or just wait some more?? Thanks
We're actually getting an update inline with other carriers? Anyone noticing any improvements? And do we have any idea when it'll push OTA?
Can someone post up just the radio?
pez910 said:
We're actually getting an update inline with other carriers? Anyone noticing any improvements? And do we have any idea when it'll push OTA?
Click to expand...
Click to collapse
The only thing I have noticed since updating last night is, data speeds have dropped. Not sure if its the radios, or if its the network being bottle necked, but Its taking me forever to download apps and files from my google drive account..
YankInDaSouth said:
Ain't gonna lie ... a lot of that went right over my head; but I'm excited about it anyway LOL :good:
Click to expand...
Click to collapse
can you send on the link for your root 4.4.4
gr8nole said:
I actually have 4.4.4 rooted right now on my device but safestrap doesn't work properly now. It starts to load but then reboots into OS.
The first 4.4.4 rom I made would boot, but only had a black screen (kernel modules didn't match boot.img), then I tried the nj6 boot.img and got the warning about unauthorized kernel. So, I decided to try one more thing. I reflashed the pre-rooted 4.4.4 rom I made and then flashed all of the 4.4.4 firmware in Odin EXCEPT for the system partition. This allowed me to boot into my rooted nj6 4.4.4 rom.
Click to expand...
Click to collapse
I was having the same issue when I tried to port Sprint 4.4.4 It would boot but I get black screen... Are you sure you flashed the 4.4.4 bootloader?
I would try to make a deodex 4.4.4 system flashable zip and flash and then right after it reboot to odin and flash the 4.4.4 kernel might work without flashing the bootloader and that way we have a working SS.
Kind of a newb to Note 3 firmware upgrades. I just downloaded the new NJ6 firmware from Sammobile. What's the best way to flash this?
gypsy214 said:
I was having the same issue when I tried to port Sprint 4.4.4 It would boot but I get black screen... Are you sure you flashed the 4.4.4 bootloader?
I would try to make a deodex 4.4.4 system flashable zip and flash and then right after it reboot to odin and flash the 4.4.4 kernel might work without flashing the bootloader and that way we have a working SS.
Click to expand...
Click to collapse
Can you upload please
uberalbo said:
Kind of a newb to Note 3 firmware upgrades. I just downloaded the new NJ6 firmware from Sammobile. What's the best way to flash this?
Click to expand...
Click to collapse
If you're a newb I recommend to stay out of it if you want root and ss. We waited all this time we can wait more to have a stable rooted with ss working version
gypsy214 said:
I was having the same issue when I tried to port Sprint 4.4.4 It would boot but I get black screen... Are you sure you flashed the 4.4.4 bootloader?
I would try to make a deodex 4.4.4 system flashable zip and flash and then right after it reboot to odin and flash the 4.4.4 kernel might work without flashing the bootloader and that way we have a working SS.
Click to expand...
Click to collapse
joseph- said:
Can you upload please
Click to expand...
Click to collapse
The only way to tell if it will work is to have someone flash just the system when its a flashable zip and then reboot to download and flash kernel via odin
gypsy214 said:
I was having the same issue when I tried to port Sprint 4.4.4 It would boot but I get black screen... Are you sure you flashed the 4.4.4 bootloader?
I would try to make a deodex 4.4.4 system flashable zip and flash and then right after it reboot to odin and flash the 4.4.4 kernel might work without flashing the bootloader and that way we have a working SS.
Click to expand...
Click to collapse
I tried that and it didn't work. The NC4 bootloader won't let you use the NJ6 boot.img. It gives the unauthorized software message.
I've been messing with this all day, to no avail.
When I first got my M8, I unlocked it and installed Android Revolution HD 7.0. As part of the process, I created a backup of the stock ROM.
Everything worked fine until I decided today that I wanted to update to a custom ROM with Lollipop. I tried the newest version of Android Revolution HD and SkyDragon, several times each, and every time it got stuck on the boot screen. The only way I can fix it is restoring to the stock ROM.
As part of my troubleshooting process today, I went from S-ON to S-OFF and changed my CID. Still, nothing worked.
I also tried to update my recovery to a newer version of TWRP and broke it for a while. Mysteriously, when I tried to install CWM from the Play app, it ended up restoring my old version of TWRP.
I downloaded an older (pre-Lollipop) version of Android Revolution and tried to install that to get back to what I was used to, but that was unsuccessful as well.
Can someone please walk me through this process?
MostlyTherapeutic said:
I've been messing with this all day, to no avail.
When I first got my M8, I unlocked it and installed Android Revolution HD 7.0. As part of the process, I created a backup of the stock ROM.
Everything worked fine until I decided today that I wanted to update to a custom ROM with Lollipop. I tried the newest version of Android Revolution HD and SkyDragon, several times each, and every time it got stuck on the boot screen. The only way I can fix it is restoring to the stock ROM.
As part of my troubleshooting process today, I went from S-ON to S-OFF and changed my CID. Still, nothing worked.
I also tried to update my recovery to a newer version of TWRP and broke it for a while. Mysteriously, when I tried to install CWM from the Play app, it ended up restoring my old version of TWRP.
I downloaded an older (pre-Lollipop) version of Android Revolution and tried to install that to get back to what I was used to, but that was unsuccessful as well.
Can someone please walk me through this process?
Click to expand...
Click to collapse
Are you one the latest firmware for your device ?
Tigerstown said:
Are you one the latest firmware for your device ?
Click to expand...
Click to collapse
I don't think so. I'm on 4.4.2. I tried upgrading to 4.4.4 with the instructions from another thread, but had issues with that as well.
MostlyTherapeutic said:
I don't think so. I'm on 4.4.2. I tried upgrading to 4.4.4 with the instructions from another thread, but had issues with that as well.
Click to expand...
Click to collapse
You need to update your firmware 1st off. Do you recall your error when you were flashing firmware?
Tigerstown said:
You need to update your firmware 1st off. Do you recall your error when you were flashing firmware?
Click to expand...
Click to collapse
I used this thread that you linked previously: http://forum.xda-developers.com/att-htc-one-m8/general/att-4-4-4-firmware-signed-encrypted-t3031703
The first ZIP was corrupted, even after a second download.
I don't recall the error on the stripped down one, but I can mess with it again later today.
Do you have any other links for the firmware?
So if I need to install 4.44 before changing ROMs, do I also need to install 5.0 separately?
MostlyTherapeutic said:
I used this thread that you linked previously: http://forum.xda-developers.com/att-htc-one-m8/general/att-4-4-4-firmware-signed-encrypted-t3031703
The first ZIP was corrupted, even after a second download.
I don't recall the error on the stripped down one, but I can mess with it again later today.
Do you have any other links for the firmware?
So if I need to install 4.44 before changing ROMs, do I also need to install 5.0 separately?
Click to expand...
Click to collapse
Yes I got a s-off firmware link that will flash if you are doing it correct. I'm at work now when I go on lunch I'll send you it
---------- Post added at 11:28 AM ---------- Previous post was at 10:53 AM ----------
MostlyTherapeutic said:
I used this thread that you linked previously: http://forum.xda-developers.com/att-htc-one-m8/general/att-4-4-4-firmware-signed-encrypted-t3031703
The first ZIP was corrupted, even after a second download.
I don't recall the error on the stripped down one, but I can mess with it again later today.
Do you have any other links for the firmware?
So if I need to install 4.44 before changing ROMs, do I also need to install 5.0 separately?
Click to expand...
Click to collapse
Here is a 4.4.4 Att firmware.zip. download an flash using fastboot. It works I know I used it last night when repairing a phone.. So after you flash firmware an it updates let me know or if you can't fastboot for some reason.
https://www.androidfilehost.com/?fid=95916177934529541
Tigerstown said:
Yes I got a s-off firmware link that will flash if you are doing it correct. I'm at work now when I go on lunch I'll send you it
---------- Post added at 11:28 AM ---------- Previous post was at 10:53 AM ----------
Here is a 4.4.4 Att firmware.zip. download an flash using fastboot. It works I know I used it last night when repairing a phone.. So after you flash firmware an it updates let me know or if you can't fastboot for some reason.
-snip due to new user restriction-
Click to expand...
Click to collapse
Woo, it worked this time! I almost thought it was stuck again, but it managed to get through.
I'm on a custom ROM with 4.4.4 now. What do I need to do to get up to 5.0? Do I just flash a 5.0 ROM, or do you have a 5.0 firmware that I flash first?
MostlyTherapeutic said:
Woo, it worked this time! I almost thought it was stuck again, but it managed to get through.
I'm on a custom ROM with 4.4.4 now. What do I need to do to get up to 5.0? Do I just flash a 5.0 ROM, or do you have a 5.0 firmware that I flash first?
Click to expand...
Click to collapse
Idk of hand if there is lollipop firmware for Att as I'm not a Att user just helping out. So either try an flash a device compatible ROM an see what happens or see if there is L firmware but it should work on 4.4.4 firmware. Should that is. What twrp version r you using? I would fastboot flash the latest one for your device.
I've successfully updated to SkyDragon v37 (5.0)!
I guess the missing piece of the puzzle was just that 4.4 upgrade, immediately followed by a ROM update prior to reboot.
Thanks so much.
MostlyTherapeutic said:
I've successfully updated to SkyDragon v37 (5.0)!
I guess the missing piece of the puzzle was just that 4.4 upgrade, immediately followed by a ROM update prior to reboot.
Thanks so much.
Click to expand...
Click to collapse
No problem. Glad to help you out! Enjoy your lollipop
Hi guys,
Anyone can guide me how to flash to the latest Official CM13? Currently my device is KIW-L22 running 13.0-20160718-UNOFFICIAL-kiwi. It's been too long since I got time to browse XDA and is really lost on the steps.
Assist me pls! thanks!
awesomeandroid said:
Hi guys,
Anyone can guide me how to flash to the latest Official CM13? Currently my device is KIW-L22 running 13.0-20160718-UNOFFICIAL-kiwi. It's been too long since I got time to browse XDA and is really lost on the steps.
Assist me pls! thanks!
Click to expand...
Click to collapse
To flash the latest version of CM, be sureto have updated your phone officially to Stock Marshmallow. If not latest CM will not flash. You an error.
I'm guessing your phone is Indian version? Anyways go to the huawei website of your country. Download the marshmallow software file there and upgrade it through force update like i recommended here -> http://forum.xda-developers.com/honor-5x/help/gr5-help-t3443573
I think you should go into your current custom recovery first and wipe data/factory reset. So u don't get bootloop as a result of CM files being on board currently.
The firmware in the link above is not for your country/device but for Egypt KII-L21CUST185.
So get the correct file for your device for your country's huawei website as mentioned above.
After flashing successfully, you have to flash custom recovery, again. Remember the whole 'fastboot flash recovery recovery.img' process then flash SuperSU in custom recovery to root? Yeah do that.
Now you can flash latest CM build again. Cheers!
Note: If your country doesn't have marshmallow (6.0.1) available, don't bother with the process as latest CM build will not flash.
stanley08 said:
To flash the latest version of CM, be sureto have updated your phone officially to Stock Marshmallow. If not latest CM will not flash. You an error.
I'm guessing your phone is Indian version? Anyways go to the huawei website of your country. Download the marshmallow software file there and upgrade it through force update like i recommended here -> http://forum.xda-developers.com/honor-5x/help/gr5-help-t3443573
I think you should go into your current custom recovery first and wipe data/factory reset. So u don't get bootloop as a result of CM files being on board currently.
The firmware in the link above is not for your country/device but for Egypt KII-L21CUST185.
So get the correct file for your device for your country's huawei website as mentioned above.
After flashing successfully, you have to flash custom recovery, again. Remember the whole 'fastboot flash recovery recovery.img' process then flash SuperSU in custom recovery to root? Yeah do that.
Now you can flash latest CM build again. Cheers!
Note: If your country doesn't have marshmallow (6.0.1) available, don't bother with the process as latest CM build will not flash.
Click to expand...
Click to collapse
Noted with thanks! It's really clear what you've explained! :good:
awesomeandroid said:
Noted with thanks! It's really clear what you've explained! :good:
Click to expand...
Click to collapse
Glad i could help. Take care.
stanley08 said:
Glad i could help. Take care.
Click to expand...
Click to collapse
Bummer, on Malaysia official website, only official Lollipop and not Marshmellow.
awesomeandroid said:
Bummer, on Malaysia official website, only official Lollipop and not Marshmellow.
Click to expand...
Click to collapse
they should skip to nougat now
PalakMi said:
they should skip to nougat now
Click to expand...
Click to collapse
Impossible? Lol
awesomeandroid said:
Impossible? Lol
Click to expand...
Click to collapse
Haha yup
PalakMi said:
Haha yup
Click to expand...
Click to collapse
Hey guys, it's been awhile again, and I've yet to flash as accordingly taught. So is there already any easier method than flashing stock MM based EMUI and flashing again to custom?
Guys I have a rooted Redmi note 4 with TWRP recovery. I'm on developer beta ROM running dev v7.6.22 and I just got an update to v7.6.29 with 84 mb. I'm unable to update it via TWRP. It's saying that the updating process ended with an error. So no way to update.... we've to wait for full ROM update (like 1.5gb) to jump to the new version.
Or do u guys have any suggestions??
Its occurred because of the TWRP Recovery. You can flash Stock Recovery or u Have to download full update package.
jbanti said:
Its occurred because of the TWRP Recovery. You can flash Stock Recovery or u Have to download full update package.
Click to expand...
Click to collapse
I know that bro but I just want an alternative without flashing the stock recovery
m.shyamsundar37 said:
I know that bro but I just want an alternative without flashing the stock recovery
Click to expand...
Click to collapse
Not Possible with Minimal updates it will result in Bootloops.
Hello,i installed in my Sony Xperia Tablet Z LTE the official LineagOs from 26.01.2018.
The Problem is that i cannot Install any Update. Everstime i Download an Image and try to Install IT, TWRP says its the wrong Image for my device. It says it is vor Pollux but my Tablet is Polux Windy. I dont know what to do. I installed the Lineage OS a few times,but Always the Same Error .
I installed TWRP News .
Can Somebody Help me,?
At the Moment i Download the Lineage Image from thus Site.
Flatulenzius said:
Hello,i installed in my Sony Xperia Tablet Z LTE the official LineagOs from 26.01.2018.
The Problem is that i cannot Install any Update. Everstime i Download an Image and try to Install IT, TWRP says its the wrong Image for my device. It says it is vor Pollux but my Tablet is Polux Windy. I dont know what to do. I installed the Lineage OS a few times,but Always the Same Error .
I installed TWRP News .
Can Somebody Help me,?
At the Moment i Download the Lineage Image from thus Site.
Click to expand...
Click to collapse
install latest twrp image.
Ive installed The last 3.02.0I
Is that the newest.?
Greetings
Flatulenzius
Flatulenzius said:
Ive installed The last 3.02.0I
Is that the newest.?
Click to expand...
Click to collapse
No. The newest one can be found here.
Rootk1t said:
No. The newest one can be found here.
Click to expand...
Click to collapse
Bro I'm facing the same issue also on latest twrp....
moustafasadek11 said:
Bro I'm facing the same issue also on latest twrp....
Click to expand...
Click to collapse
The official LOS comes with built-in recovery. which is quite crippled in what it can flash. If you have TWRP installed it should come with kernel or installed to FOTA partition.
In both cases check, that you're using TWRP 3.2.x.x version.
Rootk1t said:
The official LOS comes with built-in recovery. which is quite crippled in what it can flash. If you have TWRP installed it should come with kernel or installed to FOTA partition.
In both cases check, that you're using TWRP 3.2.x.x version.
Click to expand...
Click to collapse
I ended up flashing the second newest version (3.0.x.x.) and then flashed the latest lineage os and it worked . There is something wrong with the latest TWRP.