Hey guys,
I've been reading on forums (reading comments here and there) and getting some infos, that I need to flash a custom boot.img and xposed apk for xPosed to work on Honor 7.
Can someone get me the exact info and links where I can get the files? I've read that with Honor 7 we can get bootloop, is it fixed yet?
Also, why is the custom boot.img needed for this?
I currently have Stock ROM B380 (Android 6.0, EMUI 4) with Root and TWRP.
Thank you alot,
joaom
joaomPT said:
Hey guys,
I've been reading on forums (reading comments here and there) and getting some infos, that I need to flash a custom boot.img and xposed apk for xPosed to work on Honor 7.
Can someone get me the exact info and links where I can get the files? I've read that with Honor 7 we can get bootloop, is it fixed yet?
Also, why is the custom boot.img needed for this?
I currently have Stock ROM B380 (Android 6.0, EMUI 4) with Root and TWRP.
Thank you alot,
joaom
Click to expand...
Click to collapse
With stock firmware you will face problems. I have tried everything to make it work including custom boot and Xposed, supersu and systemless Xposed, magisk and Xposed and other stuff. It always has some problem.
Only solution as stated by @DigiGoon in his modded rom thread and verified by @HonorCasper is to use Pure Rom by DogiGoon. (I only came across this solution, may be there are others)
muradulislam said:
With stock firmware you will face problems. I have tried everything to make it work including custom boot and Xposed, supersu and systemless Xposed, magisk and Xposed and other stuff. It always has some problem.
Only solution as stated by @DigiGoon in his modded rom thread and verified by @HonorCasper is to use Pure Rom by DogiGoon. (I only came across this solution, may be there are others)
Click to expand...
Click to collapse
Hey,
Thanks for your reply. That doesnt seem to be a problem for me... 2 days ago I had to do a clean install of the stock ROM, because I had a soft-brick.
Do you know if is possible to flash that modded rom without loosing all my apps? I didnt want to install everything from zero again.
Thank you again
joaomPT said:
Hey,
Thanks for your reply. That doesnt seem to be a problem for me... 2 days ago I had to do a clean install of the stock ROM, because I had a soft-brick.
Do you know if is possible to flash that modded rom without loosing all my apps? I didnt want to install everything from zero again.
Thank you again
Click to expand...
Click to collapse
You can install any Marshmallow based ROM over your current 6.0 stock ROM, you'll not loose your apps.
Sent from my PLK-L01 using Tapatalk
joaomPT said:
Hey,
Thanks for your reply. That doesnt seem to be a problem for me... 2 days ago I had to do a clean install of the stock ROM, because I had a soft-brick.
Do you know if is possible to flash that modded rom without loosing all my apps? I didnt want to install everything from zero again.
Thank you again
Click to expand...
Click to collapse
Nope, you can dirty flash it over your existing firmware, remember to choose DigiKernel over stock kernel as that is the main thing.
Go ahead and let us know how did it go for you.
joaomPT said:
Hey guys,
I've been reading on forums (reading comments here and there) and getting some infos, that I need to flash a custom boot.img and xposed apk for xPosed to work on Honor 7.
Can someone get me the exact info and links where I can get the files? I've read that with Honor 7 we can get bootloop, is it fixed yet?
Also, why is the custom boot.img needed for this?
I currently have Stock ROM B380 (Android 6.0, EMUI 4) with Root and TWRP.
Thank you alot,
joaom
Click to expand...
Click to collapse
Custom boot.img like the one in DigiKernel, is patched for rooting and Xposed framework, in short it is made unsecure to get to work with SuperSU flashable zip, unlike the stock boot.img, so it is required to use the patched boot.img, you can also use patched stock's boot.img.
Sent from my PLK-L01 using Tapatalk
Thank you for the replies. So I gotta use patched boot.img, alright.
What do I need to flash first? Modded rom or custom boot?
1) I still get official OTA updates with modded rom? (I know if I got TWRP, I gotta flash stock recovery to install updates. is it the same with custom rom?)
2) Do I need to re-flash again SuperSU after flashing yhe new rom, or does that rom come with SU by default?
Thank you both
joaomPT said:
Thank you for the replies. So I gotta use patched boot.img, alright.
What do I need to flash first? Modded rom or custom boot?
1) I still get official OTA updates with modded rom? (I know if I got TWRP, I gotta flash stock recovery to install updates. is it the same with custom rom?)
2) Do I need to re-flash again SuperSU after flashing yhe new rom, or does that rom come with SU by default?
Thank you both
Click to expand...
Click to collapse
You can read the features on the ROM's respective threads. And all the ROMs will have patched boot.img to my knowledge.
Sent from my PLK-L01 using Tapatalk
DigiGoon said:
You can read the features on the ROM's respective threads. And all the ROMs will have patched boot.img to my knowledge.
Sent from my PLK-L01 using Tapatalk
Click to expand...
Click to collapse
Hello, and Thank you
Can you please confirm is this is the file I need to download after flashing your custom ROM?
http://forum.xda-developers.com/showthread.php?t=3034811
» XposedInstaller_3.1.apk «
Also, how does Aroma installer work? I never used it.
I flash the zip of your ROM, and Aroma installer pops up?
Thanks in advance!
joaomPT said:
Hello, and Thank you
Can you please confirm is this is the file I need to download after flashing your custom ROM?
http://forum.xda-developers.com/showthread.php?t=3034811
» XposedInstaller_3.1.apk «
Also, how does Aroma installer work? I never used it.
I flash the zip of your ROM, and Aroma installer pops up?
Thanks in advance!
Click to expand...
Click to collapse
Aroma gives u the option to install apps, install apps in system, even can pre-under and pre-over clock your cpu
joaomPT said:
Hello, and Thank you
Can you please confirm is this is the file I need to download after flashing your custom ROM?
http://forum.xda-developers.com/showthread.php?t=3034811
» XposedInstaller_3.1.apk «
Also, how does Aroma installer work? I never used it.
I flash the zip of your ROM, and Aroma installer pops up?
Thanks in advance!
Click to expand...
Click to collapse
After flashing the ROM flash this and then install this. Then you'll be able to use Xposed Modules.
And yes flash zip and the Aroma installer will pop up.
Good Luck!
DigiGoon said:
After flashing the ROM flash this and then install this. Then you'll be able to use Xposed Modules.
And yes flash zip and the Aroma installer will pop up.
Good Luck!
Click to expand...
Click to collapse
Hey!
I installed your ROM and flashed the xposed sdk23, but now it doesnt go past "HONOR" splashscreen.
What should I do? I already cleaned dalvik cache
Thanks!
joaomPT said:
Hello, and Thank you
Can you please confirm is this is the file I need to download after flashing your custom ROM?
http://forum.xda-developers.com/showthread.php?t=3034811
» XposedInstaller_3.1.apk «
Also, how does Aroma installer work? I never used it.
I flash the zip of your ROM, and Aroma installer pops up?
Thanks in advance!
Click to expand...
Click to collapse
You will need both installer file and framework file
HonorCasper said:
You will need both installer file and framework file
Click to expand...
Click to collapse
I already did some steps
1) Dirty flashed Pure EMUI ROM v2.2 (Worked fine)
2) flashed framework file (sdk23) > Now doesnt boot after flashing this (stuck on splashscreen)
joaomPT said:
Hey!
I installed your ROM and flashed the xposed sdk23, but now it doesnt go past "HONOR" splashscreen.
What should I do? I already cleaned dalvik cache
Thanks!
Click to expand...
Click to collapse
joaomPT said:
I already did some steps
1) Dirty flashed Pure EMUI ROM v2.2 (Worked fine)
2) flashed framework file (sdk23) > Now doesnt boot after flashing this (stuck on splashscreen)
Click to expand...
Click to collapse
Oh, yeah u flashed in wrong order mate if I where u I would reflash Pure to start over, then flash installer file and in the end u just flash framework file and then it should work but u can expect some longer boot time
HonorCasper said:
Oh, yeah u flashed in wrong order mate if I where u I would reflash Pure to start over, then flash installer file and in the end u just flash framework file and then it should work but u can expect some longer boot time
Click to expand...
Click to collapse
"Flash the installer file", is that the xposed APK or?
joaomPT said:
"Flash the installer file", is that the xposed APK or?
Click to expand...
Click to collapse
Its the One Called xposed Installer alpha 3.1 as i remember
---------- Post added at 09:38 PM ---------- Previous post was at 09:37 PM ----------
joaomPT said:
"Flash the installer file", is that the xposed APK or?
Click to expand...
Click to collapse
And after that the framework file and then good to go
HonorCasper said:
Its the One Called xposed Installer alpha 3.1 as i remember
---------- Post added at 09:38 PM ---------- Previous post was at 09:37 PM ----------
And after that the framework file and then good to go
Click to expand...
Click to collapse
Ok, so that's the APK . I thought I had something to "flash". an APK is only installable.
I'll try it out now
joaomPT said:
Ok, so that's the APK . I thought I had something to "flash". an APK is only installable.
I'll try it out now
Click to expand...
Click to collapse
HonorCasper said:
Its the One Called xposed Installer alpha 3.1 as i remember
---------- Post added at 09:38 PM ---------- Previous post was at 09:37 PM ----------
And after that the framework file and then good to go
Click to expand...
Click to collapse
Either im being quite dumb or I dont know..
This is that I did now:
1) Dirty install Pure EMUI ROM v2.2
2) Install xposed apk 3.1
3) flash xposed framework
4) doesn't boot anymore
joaomPT said:
Either im being quite dumb or I dont know..
This is that I did now:
1) Dirty install Pure EMUI ROM v2.2
2) Install xposed apk 3.1
3) flash xposed framework
4) doesn't boot anymore
Click to expand...
Click to collapse
How Long have u waited for boot? Sorry im going to bed now, but Hope it Works, maybe a wipe og cache and dalvik after Flash og framework
---------- Post added at 11:21 PM ---------- Previous post was at 11:21 PM ----------
Otherwise i Will help u in the morning
Related
Help For Xposed installer on Cm12.1.
Sent from my SM-G7102 using Tapatalk
@gracefang @aapav01 @mukulsoni bros . any help plz.
Sent from my SM-G7102 using Tapatalk
Don't post here @VECTUS plz move this thread to grand 2 q&a
I think I can help you with how to install Xposed framework on CM12.1
I find out about this in a thread hosted by @romracer. The framework actually created for other phones on android 5.0 but when I try installing it works.
1. Download the file.
https://mega.nz/#!JMkXlTKC!O-5wPvP410O2J88hPDAKGFE8Cd___Uh3uS2DfVBSBLQ
2. Unzip it and move the file to Sdcard.
3. Install Xposed installer.
4. Reboot recovery
5. Clear cache & dalvik cache.
6. install xposed-v71-sdk22 arm-by-romracer-20150816.zip
7. Reboot.. (Rebooting may take a while) enjoy..
If you want to uninstall. Just flash xposed uninstaller thru recovery
P.S. you can also install it on other CM12.1 base roms
& I'm just sharing
Thanks to @romracer for this
xezer1999 said:
Help For Xposed installer on Cm12.1.
Sent from my SM-G7102 using Tapatalk
Click to expand...
Click to collapse
Follow this video : ########
Didnt Work Bro
Sharol_16 said:
I think I can help you with how to install Xposed framework on CM12.1
I find out about this in a thread hosted by @romracer. The framework actually created for other phones on android 5.0 but when I try installing it works.
1. Download the file.
https://mega.nz/#!JMkXlTKC!O-5wPvP410O2J88hPDAKGFE8Cd___Uh3uS2DfVBSBLQ
2. Unzip it and move the file to Sdcard.
3. Install Xposed installer.
4. Reboot recovery
5. Clear cache & dalvik cache.
6. install xposed-v71-sdk22 arm-by-romracer-20150816.zip
7. Reboot.. (Rebooting may take a while) enjoy..
If you want to uninstall. Just flash xposed uninstaller thru recovery
P.S. you can also install it on other CM12.1 base roms
& I'm just sharing
Thanks to @romracer for this
Click to expand...
Click to collapse
Didnt work bro running cm12.1 ver4_4 by mukulsoni.
But i found a fix for newer versions of cm 12.1
http://forum.xda-developers.com/xposed/super-alpha-posted-permission-xposed-t3072979/post59901239#post59901239
Ayushj702 said:
Didnt work bro running cm12.1 ver4_4 by mukulsoni.
But i found a fix for newer versions of cm 12.1
http://forum.xda-developers.com/xposed/super-alpha-posted-permission-xposed-t3072979/post59901239#post59901239
Click to expand...
Click to collapse
is this method worked i am on cm 12.1 AIO 3
Ayushj702 said:
Didnt work bro running cm12.1 ver4_4 by mukulsoni.
But i found a fix for newer versions of cm 12.1
http://forum.xda-developers.com/xposed/super-alpha-posted-permission-xposed-t3072979/post59901239#post59901239
Click to expand...
Click to collapse
That's because you're using that xposed framework on the latest version of android 5.1x.. But I'm glad that you've find the way..:good:
---------- Post added at 03:12 PM ---------- Previous post was at 03:05 PM ----------
skywalker9969 said:
is this method worked i am on cm 12.1 AIO 3
Click to expand...
Click to collapse
How about you give it a try. I suggest using Xposed framework v75..
what's better than official xposed? check this.
Yup It Is.
skywalker9969 said:
is this method worked i am on cm 12.1 AIO 3
Click to expand...
Click to collapse
Yeah this method is working on AIO 3 too.
Welcome to my new thread!
I have just created a new custom rom which is based of stock android. The rom is Debloated, Odexed and has Layers support! I use this rom as my daily driver. The battery life and the performance is brilliant!
I´ve also added Layers support. Because of some problems with SuperSU you have to flash it manually.
Features
> Debloated
> Odex
> Busybox
> Layers support
> Permissive stock kernel
Downloads:
MBO30H: https://www.androidfilehost.com/?fid=24533103863137664
SuperSU: https://www.androidfilehost.com/?fid=24499762636000608
Xposed App: https://www.androidfilehost.com/?fid=24499762636000609
Xposed Framework: https://www.androidfilehost.com/?fid=24499762636000610
Viper4Android: https://www.androidfilehost.com/?fid=24499762636000636
Flash Instructions:
> Full Wipe
> Install Rom
> Install Other Files
> Wipe Cache, Dalvik
> Reboot!
XDA:DevDB Information
Optimized Stock Rom, ROM for the Google Nexus 5
Contributors
EatBeans
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: Android 6.0 Marshmallow
Version Information
Status: Stable
Created 2015-12-05
Last Updated 2016-01-05
Credits
Special Thanks to Hammerhead2502 for helping me to include Aroma Installer
Thanks to Josito_theDH for helping me to include Bootloader and Radio
Thx will back tomorrow
Gonna check tomorrow
D00 said:
Thx will back tomorrow
Click to expand...
Click to collapse
HowlScript said:
Gonna check tomorrow
Click to expand...
Click to collapse
Got it to work earlier than I thought
Using right now, it's running nicely
Just a sugestion, to be "100% debloated" I think it would be better to remove from this rom Cabinet, Jair Player and AdAway, the two firsts can be downloaded from the PlayStore and it's not hard to find the apk of AdAway
I will remove this apps and I make them optional in the new release as flashable zip
MMB29K update is online!
EatBeans said:
MMB29K update is online!
Click to expand...
Click to collapse
Which version of supersu did you include?
KorokHidup said:
Which version of supersu did you include?
Click to expand...
Click to collapse
Latest Beta 1.61 but it is not build-in because I had some problems with root but you can download it from the link in the description and it works fine
Will this work in MultiRom?
I don't know I think you need to test it :/
EatBeans said:
I don't know I think you need to test it :/
Click to expand...
Click to collapse
I was able to install the ROM and a custom kernel. Tried to root and it will not boot. Just hangs at the Marshmallow screen. I installed as secondary in MultiROM. Tried Super SU 2.61, and the install hangs at boot.img Also tried SuperSU 2.52, which installed, but then hangs at the Marshmallow screen.
If you install SuperSU 2.61 in the recovery it says you that your device is not rooted but you need to ignore this and do not install SuperSU in the recovery because that bricks your device maybe that was the fault. I will test this tommorow on my own and give you information about that
Strange, I loaded your rom and the root zip but a few of my apps still say my phone isn't rooted. Quick reboot, rom manager, and trimmer. The rest of my “root " apps work fine. SD Maid, titanium backup, volume boost pro, all seem to work.
Sent from my Nexus 5 using Tapatalk
---------- Post added at 09:03 PM ---------- Previous post was at 09:01 PM ----------
Now I did dirty flash it over the stock rooted 6.0 so I may need to try a clean flash from scratch...
Sent from my Nexus 5 using Tapatalk
I have an FC while setting any kind of lock screen
now i have the same problem i try to fix that
Finally I found a solution for the fc in the settings app. You have to install the root.zip in the description and it works. I have no idea why but now it works for me...
Hope I could help you
OTA update?
Hi there, I just got a notification to download and install the Android 6.0.1 system update. The notification won't go away. Should I proceed?
Is anyone else having issues with "half rooting" like I am? Where some apps seem to see that my phone is rooted but others don't?
Sent from my Nexus 5 using Tapatalk
bulbouscorm said:
Hi there, I just got a notification to download and install the Android 6.0.1 system update. The notification won't go away. Should I proceed?
Click to expand...
Click to collapse
I think the OTA update won't work but you can download my update with the root.zip in the description
Disclaimer/warning:
Install this ROM at your own risk. I am not responsible for anything that may happen to your device.
I make these for myself but want to share before people migrate to 7.0 and other devices. This ROM was based on one from scott scrosler plus some extras
ROM link 6.0.1:https://www.androidfilehost.com/?fid=24588232905721331
ROM link 7.1.1:https://www.androidfilehost.com/?fid=817550096634742109
Installation instructions 6.0.1:
Reboot into recovery mode. TWRP 3.0.2-0 was used
Usual Wipe data / Factory reset.
Flash Rom Zip no need for SuperSU zip
Reboot
Installation instructions 7.1.1:
Reboot into recovery mode. TWRP 3.0.2-0 was used
assuming 7.1.,1 bootloader and radio flashed. If not:https://mega.nz/#!qggDhRYT!fzdw1IH7NTi-WFhlqFXaleK1cuq_F6uIpsjtx2KU8aE
Usual Wipe data / Factory reset.
Flash Rom Zip no need for SuperSU zip
Reboot
Change log 6.0.1:
1.0MV
initial build
light file by GrayBoltWolf
added adaway, root browser and reboot apps
changes to updater-script
1.1MV and 1.2MV
partial debloating
1.3MV
more debloating
1.4
updated AdAway and SuperSU 2.74
1.5 minor debloating updated SuperSU 2.76
1.6 updated reboot manager to 2.0 and updated SuperSU 2.78
Change log 7.1.1:
initial build
light file by GrayBoltWolf
added adaway, root browser and reboot apps
changes to updater-script
Hi,
Thank you!
Does the kernel force encrypt?
Yes it is encrypted, AFAIR.
Droidphilev said:
Hi,
Thank you!
Does the kernel force encrypt?
Click to expand...
Click to collapse
Nope on stock kernel.
---------- Post added at 01:26 PM ---------- Previous post was at 01:26 PM ----------
ronaldheld said:
Yes it is encrypted, AFAIR.
Click to expand...
Click to collapse
Not encrypted on my install on stock kernel. Custom kernels break WiFi though.
Hmm, it's unclear to me now. Will flash the rom and use a custom kernel to be sure. Encryption is not an option for me.
Sorry been too long since I started from "stock" ROM.
I just looked up my base ROM and it states no encryption.
Droidphilev said:
Hmm, it's unclear to me now. Will flash the rom and use a custom kernel to be sure. Encryption is not an option for me.
Click to expand...
Click to collapse
Custom kernel breaks WiFi.
Stock kernel will NOT encrypt your phone.
Thanks both!
Does this have Gapps baked into it?
Sent from my Nexus 6 using XDA-Developers mobile app
rev89 said:
Does this have Gapps baked into it?
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
it is stock, so yes. gapps is already baked in
Thanks. Sorry if that was a dumb question. Fell outa flashing things often a few years ago. Trying to get my groove back now haha
Sent from my Nexus 6 using XDA-Developers mobile app
rev89 said:
Does this have Gapps baked into it?
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes, no need to flash your favorite Gapps
Question?
My phone has downloaded a system update, should I install this or just ignore it? I'm just asking because I don't know if this would break the root access if I go ahead and install it, a response is greatly appreciated.
matutemhn said:
My phone has downloaded a system update, should I install this or just ignore it? I'm just asking because I don't know if this would break the root access if I go ahead and install it, a response is greatly appreciated.
Click to expand...
Click to collapse
I would not. Go to Settings, Apps Google Play Services and turn off all notifications.
matutemhn said:
My phone has downloaded a system update, should I install this or just ignore it? I'm just asking because I don't know if this would break the root access if I go ahead and install it, a response is greatly appreciated.
Click to expand...
Click to collapse
Yeah, what he said. Taking an ota with a custom recovery = bad news
Are you planning on keeping this ROM updated with Google monthly patchs?
Sent from my Nexus 6 using XDA-Developers mobile app
pillo85 said:
Are you planning on keeping this ROM updated with Google monthly patchs?
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
If I could without starting from a new stock base, I would.
I have a minor update to brle uploaded in a few weeks. Anyone want to see this upgraded to N?
ronaldheld said:
I have a minor update to brle uploaded in a few weeks. Anyone want to see this upgraded to N?
Click to expand...
Click to collapse
Does a fat kid like candy?
Sure :good:
XPERIA POISON STABLE v2.4 ROM for XX F5121/F5122Unlocked BL/Recovery (Aroma Installer)
Hi everyone! It's my first ROM for XX, so let's try all futures of our Wonderful Phone!
I Present you Stock-Based ROM with some futures:
- Deodexed and Zipaligned
- Init.d support
- SuperSu included
- SELinux Permissive
- Build.prop and init.d tweaks for better batery life
- Aroma Installer for bouth F5121 and F5122 devices
- Patched services.jar (SuperUser Mod)
- kernel DRM-fix, DM-verify, RIC-off
How To Install ROM:
First of all You need Back Up DRM-keys by Dirty-Caw Exploit then Unlock Your BL
1) Download and put .zip to your Phone
Recovery:
~~~2) Download and put recovery.img to ADB folder
~~~3) Flash recovery.img from ADB (fastboot flash recovery recovery.img) command
or:
~~~2) Download Flashable .zip from attachment
~~~3) Install via FlashFire (root rights needed)
4) Go to recovery with pressing Power and Volume - keys from off condition and press bouth keys while entering to TWRP recovery.
5) Go to Wipe - Advanced Wipe and wipe /data folder, than reboot into recovery and wipe /dalvik /system /cache
6) Go to Mount - check /system /sdcard1
7) Go to Install and Install POISON.zip than folow Aroma Instaaller steps
8) Reboot devide (it shall rebooted twice)
9) Enjoy
Changelog:
v2.01
new Add Stereo (Dual) Incall Speaker Audio Mod by Default maded by me.
Add recovery script for reflashing TWRP recovery
Add Audio Mod (optional)
v2.0
Fixed some update-binary scripts errors.
Fixed all issues. All in One .zip now!
DOWNLOAD Section:POISON STABLE v2.3 based on 34.2.A.2.69 fw
POISON STABLE v2.4 based on 34.3.A.0.194 fw
4pda Thread With my ROMs
View attachment twrp-3.0.2-suzu.zip
Download is no more availible?
---------- Post added at 12:38 AM ---------- Previous post was at 12:23 AM ----------
Thanks!
Now i am downloading. Will report later how it works.
Oel said:
Download is no more availible?
---------- Post added at 12:38 AM ---------- Previous post was at 12:23 AM ----------
Thanks!
Now i am downloading. Will report later how it works.
Click to expand...
Click to collapse
Link Updated! Try Now!
lubik1 said:
Link Updated! Try Now!
Click to expand...
Click to collapse
Yeah, im downloading.
Have the rom DRM Tweak?
There is a new kernel with DRMtweak in the xperia x compact section.
Oel said:
Yeah, im downloading.
Have the rom DRM Tweak?
There is a new kernel with DRMtweak in the xperia x compact section.
Click to expand...
Click to collapse
No. it don't. I can't find any guide for Nougat if anyone find i can try.
Does x-reality and bionz (camera feature) work? Really looking FWD, keep the great work! Gambare!
bauboni said:
Does x-reality and bionz (camera feature) work? Really looking FWD, keep the great work! Gambare!
Click to expand...
Click to collapse
It's Stock-Based Rom, so if you keep your drm-keys before unlock BL, you can restore they after flashing my ROM and x-reality and bionz will work
Cool, but I've lost my DRM keys when I unlocked the bl (didn't know about the cons)...
lubik1 said:
No. it don't. I can't find any guide for Nougat if anyone find i can try.
Click to expand...
Click to collapse
Here is the kernel with the DRM patch from tobias.waldvogel . Maybe you ask the dev how to do: http://forum.xda-developers.com/x-compact/development/advanced-stock-kernel-twrp-xperia-x-t3464685
After installation no root. Supersu is here, but there is no root installed.
I think we need a rooted kernel, what we can push trough adb fastboot. Because the partitions doesnt mount in TWRP.
Recovery Tested on F5122 But Device not boot after Flash Recovery.img
Ok.
I flashed TWRP through fastboot, turnt the phone off and than i was going into TWRP with the button combination.
I can´t wipe anything because th partitions dont mount.
Than i flashed the rom.
Many failures are shown, but at the end, the rom was flashed and was booting 2 times.
The rom runs good and fast, but there was no root. Supersu can´t find root.
I tryed to root several times with different zips, and was able to root the phone with BETA-SuperSU-v.74-2-20160519174328.zip.
Than i realized that the kernel was not permissive. I can´t install the driver from viber4android.
So i was going back to MM.
Thanks for the rom, but i think you have to build a rooted and permissive kernel with DRM thing etc., than it would be a real great rom.
Oel said:
Ok.
I flashed TWRP through fastboot, turnt the phone off and than i was going into TWRP with the button combination.
I can´t wipe anything because th partitions dont mount.
Than i flashed the rom.
Many failures are shown, but at the end, the rom was flashed and was booting 2 times.
The rom runs good and fast, but there was no root. Supersu can´t find root.
I tryed to root several times with different zips, and was able to root the phone with BETA-SuperSU-v.74-2-20160519174328.zip.
Than i realized that the kernel was not permissive. I can´t install the driver from viber4android.
So i was going back to MM.
Thanks for the rom, but i think you have to build a rooted and permissive kernel with DRM thing etc., than it would be a real great rom.
Click to expand...
Click to collapse
Flash Viper4android from TWRP and you'll see it works great. About Supersu I have not problem with it - binary update great. And about errors on script - can you share any Log? Cos I have tested that rom with other people and they don't have any problems... Anyway I will reload new build with some fixes now.
Oel said:
Here is the kernel with the DRM patch from tobias.waldvogel . Maybe you ask the dev how to do: http://forum.xda-developers.com/x-compact/development/advanced-stock-kernel-twrp-xperia-x-t3464685
Click to expand...
Click to collapse
that drm-patch can be applyed to MM 6.0 ROMs on 7.0 Nougat it stuck with build kernel... we need new method to do DRM fix.
lubik1 said:
Flash Viper4android from TWRP and you'll see it works great. About Supersu I have not problem with it - binary update great. And about errors on script - can you share any Log? Cos I have tested that rom with other people and they don't have any problems... Anyway I will reload new build with some fixes now.
Click to expand...
Click to collapse
Will test new build.
Thanks!
---------- Post added at 05:24 PM ---------- Previous post was at 04:27 PM ----------
lubik1 said:
that drm-patch can be applyed to MM 6.0 ROMs on 7.0 Nougat it stuck with build kernel... we need new method to do DRM fix.
Click to expand...
Click to collapse
Look here, nougat rom with dm tweak on kernel http://forum.xda-developers.com/x-c...e-m-rom-nougat-7-0-266-based-preview-t3522002
The new version 1.1 is great!
No problems with the install. All works perfect. Also root is ok.
Thank you so much for your great work!
Do you have a link to a working viber4android zip?
Cant find a working version.
---------- Post added at 07:47 PM ---------- Previous post was at 07:16 PM ----------
I can not edit stuff in system. And when i deinstall system apps, after reboot they are all back. Sounds like no permisive kernel?
Viber4android still no working.
This is what i get
Oel said:
This is what i get
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B1CJidSWx71kbGxoMFp0RElZaTQ/view?usp=drivesdk
lubik1 said:
https://drive.google.com/file/d/0B1CJidSWx71kbGxoMFp0RElZaTQ/view?usp=drivesdk
Click to expand...
Click to collapse
Thank you, but doesnt work.
Hello everybody, Just brought And root m'y 965F but is it possible to install xposed ? On Magisk i found so many sdk i dont know wich one is good,
Thanks by advance !
Fred2Mars said:
Hello everybody, Just brought And root m'y 965F but is it possible to install xposed ? On Magisk i found so many sdk i dont know wich one is good,
Thanks by advance !
Click to expand...
Click to collapse
Hi.
Yes you can, does not matter witch magisk or su you are using you can flash xposed_sdk_26_arm64 for 8.0.0 and then xposed_sdk_27_arm64 for 8.1.0 :good:
Great !! Thanks à lot !!! I must dl apk ??
Thanks agaiin
FdeKlerk said:
Hi.
Yes you can, does not matter witch magisk or su you are using you can flash xposed_sdk_26_arm64 for 8.0.0 and then xposed_sdk_27_arm64 for 8.1.0 :good:
Click to expand...
Click to collapse
Hey man,
do you know if xposed is working on the stock rom? My model G965F s9+ duos with root (magisk) and TWRP.
I ended up in a bootloop
Is there any custom rom which has all of samsungs features and more. I don't wanna loose the camera features.
Strange.
Demi36 said:
Hey man,
do you know if xposed is working on the stock rom? My model G965F s9+ duos with root (magisk) and TWRP.
I ended up in a bootloop
Is there any custom rom which has all of samsungs features and more. I don't wanna loose the camera features.
Click to expand...
Click to collapse
That is strange I had everything on stock rom for a while and then went over to Havoc OS.
1. TWRP
2. Install root.
3. Install xposed zip. !!NB Make sure to flash the zip for your device AND OS version.
4. IF that failes, flash root zip over xposed.
Xposed works with gravity box.
My steps of making it work:
TWRP
Magisk Root
Flash Soldier Rom
Flash AGFK KERNEL
re flash Magisk
From magisk modules load xposed SDK 26, install apk sugested from menu, then reboot and activate module.
Now you have a systemless working xposed.
---------- Post added at 09:15 AM ---------- Previous post was at 09:15 AM ----------
Xposed works with gravity box.
My steps of making it work:
TWRP
Magisk Root
Flash Soldier Rom
Flash AGFK KERNEL
re flash Magisk
From magisk modules load xposed SDK 26, install apk sugested from menu, then reboot and activate module.
Now you have a systemless working xposed.