Hello, I flashed pheonix rom, flashed Bootloader and Modem, but I dont have LTE connection, everything else works fine. It is problem with modem flash or somewhere else ?
The modem/bootloader in the Phoenix thread is for the international model (900f) I believe.
Personally haven't tried his rom, but if you have the Tmobile MM modem and bootloader, it supposedly works. Excluding Wifi calling of course.
Sent from my SM-G900T
I also flashed G900T modem and bootloader, but I think this modem doesn't have LTE. Where could I find LTE modem ?
Some roms display 4G instead of Lte.
Sent from my SM-G900T
Is there a download link for the marshmellow bootloader and modem?
I'm currently running Phoenix but it's older lollipop version. I'm wanting to go to the latest Phoenix.
I'm assuming I need the mm bootloader and modem?
As noted above Phoenix Rom shows 4G and not LTE.
COfatboy said:
Is there a download link for the marshmellow bootloader and modem?
I'm currently running Phoenix but it's older lollipop version. I'm wanting to go to the latest Phoenix.
I'm assuming I need the mm bootloader and modem?
As noted above Phoenix Rom shows 4G and not LTE.
Click to expand...
Click to collapse
Look in op
http://forum.xda-developers.com/tmo...rom-sm-g900tpg2-rooted-deodxed-t3424587/page1
ShinySide said:
Look in op
http://forum.xda-developers.com/tmo...rom-sm-g900tpg2-rooted-deodxed-t3424587/page1
Click to expand...
Click to collapse
That's exactly what I was looking for.
Thanks, I appreciate it.
Related
Hi Everyone
I think my cell reception has gotten worse since flashing the OC Kernal. Did it have any modem changes associated with it?
Currently Im running this modem(baseband): 1717DTLLA2. but im note sure what the stock modem was or if that is the stock modem,beacuse...
I think.... it was running the UCLA3 modem at stock...does that mean I can flash the At&t modem?
Can someone with a Telus / AT&T Note verify this. Arent we both on Hspa+ so should they should be identical modems?
*P.s...if a dev sees this pls make us CWM compatible zips of the stock telus radio /rom!
Thanks!
CS
crielstar said:
hi everyone
i think my cell reception has gotten worse since flashing the oc kernal. Did it have any modem changes associated with it?
Currently im running this modem(baseband): 1717dtlla2. But im note sure what the stock modem was or if that is the stock modem,beacuse...
I think.... It was running the ucla3 modem at stock...does that mean i can flash the at&t modem?
Can someone with a telus / at&t note verify this. Arent we both on hspa+ so should they should be identical modems?
*p.s...if a dev sees this pls make us cwm compatible zips of the stock telus radio /rom!
thanks!
Cs
Click to expand...
Click to collapse
look in dev section....they are there,. Diablo009 made me one yesterday (att)
Oh I just saw that thanks. I will need the stock Telus CWM radio before I flash any radios. Reason being I cant extract my radio with ADB the usb driver doesent install...
What update are most Verizon LG G3 users on 10b, 11c, or 12b?
I am rooted on 10b. Very happy and not interested in rom's. Although I will bump and use a stock rom as soon as there is an update I want that I can't root or can't roll back.
Rooted on stock 12b via OTAs. Yes, rooted. Just ensure SuperSU has the "Survival Mode" setting checked and you do NOT have TWRP installed and it will preserve root through the 11c to the 12b OTAs. Also, don't have installed anything like Xposed, Busybox, etc. Not sure if those would affect it, but they have on other phones.
I had stock 10b rooted, no frozen apps, nothing removed, etc. Took the 11c OTA, then the 12b OTA and each time, root as still there.
I am rooted and on jasmine 4.0 with 12B modem and SkyDragon 2.72 kernel. System is heavily modded via Xpose. This combo is fantastic imo.
Rooted, running the 12b modem and system, 11c boot.
Title change
Hello,
I have changed the title of this thread from:
[Q] What update are you on?
Click to expand...
Click to collapse
to:
[POLL] What update are you on?
Click to expand...
Click to collapse
While a poll is essentially asking a question, it's not a question for help and thus is allowed in the general section. To make sure it's not confusing to some users, I've changed the title.
Regards,
B1nny
Forum moderator
Running Jasmine 4.0 (12b), with the stock kernel and 12b modem.
any difference?
geoff5093 said:
Running Jasmine 4.0 (12b), with the stock kernel and 12b modem.
Click to expand...
Click to collapse
Did you get the 12b modem from Jasmine?
Are you in an extended network?
If so did you notice a difference in the network?
misjudged said:
Did you get the 12b modem from Jasmine?
Are you in an extended network?
If so did you notice a difference in the network?
Click to expand...
Click to collapse
Yes I did, I'm on US Cellular at the moment, but data has always been insanely slow at 1x.
10b and loving it. Gonna possibly flash the fix for the blurry text and the new radios. Will do lollipop when it has more xposed framework support .
Sent from my Verizon LG G3 using Tapatalk
Vs985. Im on the pa 5.0.1 flashed 12b, as my DD it works great for me.
foundingfathersfan2 said:
Vs985. Im on the pa 5.0.1 flashed 12b, as my DD it works great for me.
Click to expand...
Click to collapse
How is hotspot, camera, bt, and radios?
Running JasmineROM 4.0 (12B) with SkyDragon kernel 0.2.7.4 as my daily driver. But I've got a few LP nandroids that I switch between for some fun. Running the stock rom mainly for camera features tbh
Also can we see some screen shots of the dialer thanks
AOSP all the way! Anything less is less than this great phone deserves! Running the latest Illusion rom and it's the best LP rom out there at the moment, IMHO.
jfriend33 said:
How is hotspot, camera, bt, and radios?
Click to expand...
Click to collapse
Wifi works good. I updated the google cam to latest one and its ok, not as good as stock but ok. Everything else works good for me. I just found the LG quick remote app for 5.0.x
http://forum.xda-developers.com/lg-g3/themes-apps/app-quickremote-port-aosp-t2929146
Never took an OTA update. Went from stock 10b to rooted, bumped with TWRP, then flashed custom ROMs. Tried SkyDragon, CM 11, now have been using SlimKat 4.4.4 for weeks. Awesome ROM and does everything I need it to (along with compatibility with Xposed).
10b rooted and stock rom with xposed framework
Sent from my nexus 7 on lollipop
4D
Sent from my VS985 4G using Tapatalk
I don't know I just flash lol
Hi.. Can i install any Note 3 ROMS other than Sprint ROMS on Unlocked Sprint galaxy note 3
Like installing roms of http://forum.xda-developers.com/galaxy-note-3 this link
(Only Qualcom ones)thanks
Aamirx27 said:
Hi.. Can i install any Note 3 ROMS other than Sprint ROMS on Unlocked Sprint galaxy note 3
Like installing roms of http://forum.xda-developers.com/galaxy-note-3 this link
(Only Qualcom ones)thanks
Click to expand...
Click to collapse
Did you mean unlocked bootloader ? All Sprint Note 3's have an unlocked bootloader. Or did you mean internationally unlocked ?
You need to install roms that are set up for the carrier you are using i.e. SPRINT AT&T etc. Now the other you have to be aware of is what your current of KK is. NC5, NH7, or NK4 ? That will determine what tom you are going to be able to run. If you are on say NC5 then you what to use an NC5 based rom. If you on NC5 and you what to run a rom based on NK4 then it would be best if you flash and root a stock NK4 OS. Then flash the custom NK4 based rom you want. To determine what a rom ids based on look in the OP thread it will be there. The only exception is an AOSP based rom like CM or C-Rom here is the link http://forum.xda-developers.com/showthread.php?t=2739968 this rom will run on your device and it is not sprint. For more info click my signature. Enjoy !!!
jimzweb1 said:
Did you mean unlocked bootloader ? All Sprint Note 3's have an unlocked bootloader. Or did you mean internationally unlocked ?
You need to install roms that are set up for the carrier you are using i.e. SPRINT AT&T etc. Now the other you have to be aware of is what your current of KK is. NC5, NH7, or NK4 ? That will determine what tom you are going to be able to run. If you are on say NC5 then you what to use an NC5 based rom. If you on NC5 and you what to run a rom based on NK4 then it would be best if you flash and root a stock NK4 OS. Then flash the custom NK4 based rom you want. To determine what a rom ids based on look in the OP thread it will be there. The only exception is an AOSP based rom like CM or C-Rom here is the link http://forum.xda-developers.com/showthread.php?t=2739968 this rom will run on your device and it is not sprint. For more info click my signature. Enjoy !!!
Click to expand...
Click to collapse
I can use any carrier om my device whether GSM or CDMA, its unlocked. Do i still have to flash roms matching baseband or Ids or i can flash any note 3 rom
Aamirx27 said:
I can use any carrier om my device whether GSM or CDMA, its unlocked. Do i still have to flash roms matching baseband or Ids or i can flash any note 3 rom
Click to expand...
Click to collapse
The baseband needs to be within the version of the OS. Meaning, for instance if your running KitKat the basebands are 4.4+ NC5, NH7, and NK4. If you tried to flash a rom that is older ( like ICS 4.0 with a baseband of MJ1 or MJ4 ) the bootloader will not let you do it. If you went to Lollipop your baseband will be 5.0 something still to new to say exactly. Think of the baseband as a antenna, some guys will run a rom with a NH7 base and a NK4 baseband because they get better signal. You will have to try different and see which baseband works best for you, every phone is different, and every area people live is different.
As far as whether to use GSM OR CDMA that depends on which carrier you are using now. The device will run on both signals. So if you are using a carrier like Sprint you will need a CDMA based rom, if you are using a carrier like AT&T you will need a GSM based rom.
jimzweb1 said:
The baseband needs to be within the version of the OS. Meaning, for instance if your running KitKat the basebands are 4.4+ NC5, NH7, and NK4. If you tried to flash a rom that is older ( like ICS 4.0 with a baseband of MJ1 or MJ4 ) the bootloader will not let you do it. If you went to Lollipop your baseband will be 5.0 something still to new to say exactly. Think of the baseband as a antenna, some guys will run a rom with a NH7 base and a NK4 baseband because they get better signal. You will have to try different and see which baseband works best for you, every phone is different, and every area people live is different.
As far as whether to use GSM OR CDMA that depends on which carrier you are using now. The device will run on both signals. So if you are using a carrier like Sprint you will need a CDMA based rom, if you are using a carrier like AT&T you will need a GSM based rom.
Click to expand...
Click to collapse
Thanks. can u provide me with twrp link
help me out
jimzweb1 said:
The baseband needs to be within the version of the OS. Meaning, for instance if your running KitKat the basebands are 4.4+ NC5, NH7, and NK4. If you tried to flash a rom that is older ( like ICS 4.0 with a baseband of MJ1 or MJ4 ) the bootloader will not let you do it. If you went to Lollipop your baseband will be 5.0 something still to new to say exactly. Think of the baseband as a antenna, some guys will run a rom with a NH7 base and a NK4 baseband because they get better signal. You will have to try different and see which baseband works best for you, every phone is different, and every area people live is different.
As far as whether to use GSM OR CDMA that depends on which carrier you are using now. The device will run on both signals. So if you are using a carrier like Sprint you will need a CDMA based rom, if you are using a carrier like AT&T you will need a GSM based rom.
Click to expand...
Click to collapse
hey can i install N9005 Roms or TMobile roms in N900P is it possible ?
Aamirx27 said:
Thanks. can u provide me with twrp link
Click to expand...
Click to collapse
Yes, click on flashing rom basics in my signature all the links are there. Enjoy !!!!!
---------- Post added at 07:31 PM ---------- Previous post was at 07:02 PM ----------
shoaib4a said:
hey can i install N9005 Roms or TMobile roms in N900P is it possible ?
Click to expand...
Click to collapse
Theoretically yes, but in reality no. Lets say you installed a Tmobile rom on your Sprint N900P. It would most likely boot up but you would have no signal because the baseband that came with Tmobile rom would trying to connect to a Tmoblie cell tower. So if you have your service with Sprint and not Tmobile it's going to try and verify an account with Tmobile that does not exist.
jimzweb1 said:
Yes, click on flashing rom basics in my signature all the links are there. Enjoy !!!!!
---------- Post added at 07:31 PM ---------- Previous post was at 07:02 PM ----------
Theoretically yes, but in reality no. Lets say you installed a Tmobile rom on your Sprint N900P. It would most likely boot up but you would have no signal because the baseband that came with Tmobile rom would trying to connect to a Tmoblie cell tower. So if you have your service with Sprint and not Tmobile it's going to try and verify an account with Tmobile that does not exist.
Click to expand...
Click to collapse
but what if its carrier unlocked
Hey my GF's G3 was a POS after 5.0 so I rooted it and flashed Cloudy 1.2 KK ROM.
The modem is still 23c baseband though... Where do I get the latest modem and how can I flash it?
I see the modem.img in the General Page but how do I flash it in TWRP? or do I?
Never mind.. Not sure about this DD thing?
Found the flash2 method.
musicfreak190 said:
Found the flash2 method.
Click to expand...
Click to collapse
verizon g3 android development/ jasmine rom thread/ post #4= flashable modem files for twrp
bweN diorD said:
verizon g3 android development/ jasmine rom thread/ post #4= flashable modem files for twrp
Click to expand...
Click to collapse
Thanks bud. I flashed the latest kit kat radio and it worked for a bit on cloudy 1.2.. Then force closes up couldn't do anything.. I saw the signal dropping so I reflashed and no good still. Went back to lollipop via sky dragon and this looks pretty damn good.
She needs a stock rom. Nothing built from source with bugs so this may be my best bet.
Download:
- G900A_OF2_Stock_ROM_for_G900T
Instructions:
- Flash with TWRP (knox 0x1) or FlashFire (knox 0x0).
- No need to wipe, the ROM will perform a factory data reset during the flash. Backup your User Data prior to flashing.
- The ROM requires a 5.0 bootloader therefore you must be on the OB1 or OF6 bootloader for it to run.
- Allow 10 - 15 mins for first boot.
Tip: For faster speed turn off animations from Developer Options!
Optional:
- G900A_OF2_TetherAddOn
- G900A_OC4-OF2_Batch_DeBloater (Customizable)
Kernel:
- G900T, stock, OB1 kernel
Known Issues:
None!
Uploaded new ROM using the G900T stock, OB1 kernel, instead of the G900A OF2 kernel, for better battery life. The ROM required a couple of minor tweaks in order to work flawlessly on the stock OB1 kernel. Those that downloaded the original ROM may want to download the latest version.
Everything works on it ? WiFi calling , private mode , etc ?
Sent from my SM-G900T using XDA Free mobile app
any feedback on this rom so far?
420haxr said:
Everything works on it ? WiFi calling , private mode , etc ?
Sent from my SM-G900T using XDA Free mobile app
Click to expand...
Click to collapse
It works still testing of course but of course no wifi calling.
AT&T on t-mobile forum ??
vphotographic said:
AT&T on t-mobile forum ??
Click to expand...
Click to collapse
Why not? As long as it works properly, I'm all for devs using a different rom base to create something new. I'm using one of the ATT custom roms on my G900T right now.
Of course, if you NEED wifi calling, this isn't the rom for you.
mike-y said:
Why not? As long as it works properly, I'm all for devs using a different rom base to create something new. I'm using one of the ATT custom roms on my G900T right now.
Of course, if you NEED wifi calling, this isn't the rom for you.
Click to expand...
Click to collapse
Hi! Could you eleborate on which custom AT&T rom you are using on the TMO G900T?
chiquito3 said:
Hi! Could you eleborate on which custom AT&T rom you are using on the TMO G900T?
Click to expand...
Click to collapse
I have used these two so far
http://forum.xda-developers.com/att-galaxy-s5/development/5-0-oc7-tms5-1-0-4-29-15-t3095987
http://forum.xda-developers.com/att.../rom-allianceromv8-lite-available-18-t3098527
mike-y said:
I have used these two so far
http://forum.xda-developers.com/att-galaxy-s5/development/5-0-oc7-tms5-1-0-4-29-15-t3095987
http://forum.xda-developers.com/att.../rom-allianceromv8-lite-available-18-t3098527
Click to expand...
Click to collapse
And do they work with no problem?
They work perfectly.
Does finger screen unlocker works with this rom?
---------- Post added at 11:15 AM ---------- Previous post was at 11:12 AM ----------
chiquito3 said:
Does finger screen unlocker works with this rom?
Click to expand...
Click to collapse
Forget it. It was the time setting for the lock.
mike-y said:
I have used these two so far
http://forum.xda-developers.com/att-galaxy-s5/development/5-0-oc7-tms5-1-0-4-29-15-t3095987
http://forum.xda-developers.com/att.../rom-allianceromv8-lite-available-18-t3098527
Click to expand...
Click to collapse
How did you installed these 2 AT&T roms on the Tmo version phone? Did you used Flashfire or TWRP?
Right now my phone says that is on I'm on Stock OG6 Baseband rooted with the TrapKernel but the build says OF6.
Why is that?
chiquito3 said:
How did you installed these 2 AT&T roms on the Tmo version phone? Did you used Flashfire or TWRP?
Right now my phone says that is on I'm on Stock OG6 Baseband rooted with the TrapKernel but the build says OF6.
Why is that?
Click to expand...
Click to collapse
I use TWRP. I suppose you could use Flashfire also, but I've never tried it. I also just replied to your PM.