hi all
are there any way to enable usb dbug mode from flash mode
this will help me to crack pattern lock
also i have many tablet needs to log recovery mode
have you any idea to force the device to log recovery mode
Hello,
I recently got a used Galaxy S3 I9300. I wanted to install temasek's UNOFFICIAL CM12.1. I already installed CWM on my old Galaxy S2.
Now I got a ridiculous problem; I cannot get CWM or TWRP installed via Odin. This is what I did, in every detail:
a) Turn on USB Debugging (not even sure if necessary)
b) Started in DOWNLOAD-MODE by Voldown+Home+Power
b1) Funnily, it already confirms that I tried to install "Custom Binary Download" 4 times but otherwise is unimpressed. Current binary is still "Samsung Official".
b2) I connect via USB and start ODIN 3.10.7 in Admin mode.
b3) It recognizes the telephone, I have "Auto Reboot" and "F. Reset Time" selected, nothing else. Then I select the .tar I want (i tried "twrp-2.8.6.1-i9300.tar" and "CWM_6.0.4.7_Touch_GT-I9300.tar"), AP box is checked.
b4) I press start, Odin says that everything is fine and signals "Pass".
c) Now, when I start into recovery mode by Volup+Home+Power I still land in the default recovery. This is really annoying.
What am I doing wrong?
Thanks a lot in advance
Greetings
untrue
After trying all note to bypass Google verification...I'm currently in guest mode and needhelp... So how can I disableFRP TO UNLOCKIT AND CAN ITB DONE IN GUEST MODE
I own a Samsung SM-J500F/DS
I wanted to factory reset it but, I forgot my google password and i couldn't find it no matter what i tried.
I decided to hard reset it thinking that i can bypass the google password thing. It obviously came up afterwards and I realized I also forgot the google account.
AGAIN, i tried to flash a new firmware using Odin, but the FRP lock came up and blocked the installation. It showed failed and the phone was bricked.
I tried Kies and Smart Switch but both don't recognize my phone at all. I can't use the emergency recovery tool cause my phone literally doesn't show up anywhere. It does on Odin but i can't install the firmware i have downloaded.
Now it doesn't boot up at all and Just shows me the blue screen with "An error has occurred while updating the device software. Use Emergency recovery function in the Smart Switch PC software." All i can do is enter in download mode. In the upper right corner it says i have:
-the samsung official binary
-system from samsung too,
-FRP LOCK on obviously
-Qualcomm secure boot enabled
-RP SWERV: S1, T1, H1, R1, A1, P1
-SECURE DOWNLOAD: ENABLE
Every possible help/solution is well appreciated. Thanks in advance!
Hi,
I can't use my tablet anymore tried Odin to re-install the origin firmware "SM-T825Y_1_20180122165040_zf84f94qoe_fac.zip" (new android 8 stock ROM) but it fails, Odin shows the transfer has PASSED but I still get this message in the screen:-
"Security Error: This device has been flashed with unathorised software & is locked.
Call your mobile operator for additional support. "
I wasn't planning flashing a custom ROM the only thing I did is put OEM Lock on, not sure why I did that.
When I put in Download Mode it shows this in the screen:-
ODIN MODE [High Speed]
PRODUCT NAME: SM-T825Y
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
FAP LOCK: ON
OEM LOCK: ON
DID: 03EA1E00AE16
WARRANTY VOID: 0x1 (Ox20C)
QUALCOM SECUREBOOT: ENABLE
AP SWREV: B3 (1, 1, 1, 1, 1) K2 S2
SECURE DOWNLOAD: ENABLE
CCIC: S2 MM005 HW: 4
BOOT: 6 MAIN: DS
Regards,
Sal.
1. It's FRP not FAP ya perv.
2. Reflash firmware with odin, do not go into download mode afterwards before 3.
3. The rest watch this video carefully, and next time you want to leave your device stock, leave it stock, if you want to install a custom rom or twrp, do not have auto reboot ticked.
4. here is link ---> https://www.youtube.com/watch?v=o0T-CR-KpfM
I did reflash with odin but I still get this message "Security Error: This device has been flashed with unathorised software & is locked.
Call your mobile operator for additional support. " There is another small message on top , "Custom binary blocked by FRP. (boot.img)"
Odin tells me its PASSED but the Tablet still says its locked FRP and OEM locked .
In download mode I am getting same info.
I just went to the Samsung Shop and they fixed it for free, they said they just put a new firmware not sure how they did it but I tried it myself with latest firmware but I couldn't get rid of the lock, I am missing something? like software? or just not enough info about about getting rid of locks?
I had the same issue after i installed a Xposed module. Had to reflash Pie Bootloader and Rom via odin. Now it boots, but i can't flash twrp anymore... It always fails.