Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
shortcopperjumper said:
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
I have the exact same problem for me too :crying:
maialo said:
I have the exact same problem for me too :crying:
Click to expand...
Click to collapse
same here.
desperately trying to find a solution, but I guess it's totally bricked ...
the ddsetNa
I'm getting out of options here:
when I try to 'catch' the phone in fastboot mode using a firmare restore tool, the tool detects the phone but complains the connection is broken.
how do I turn off this watchguard that reboots the phone??
jpsollie said:
I'm getting out of options here:
when I try to 'catch' the phone in fastboot mode using a firmare restore tool, the tool detects the phone but complains the connection is broken.
how do I turn off this watchguard that reboots the phone??
Click to expand...
Click to collapse
in case the 2 people here are still looking 4 the answer:
http://forum.xda-developers.com/showthread.php?t=2412017
get the firmware for your phone (don't know if it's G700-U00 or U10), and flash images back. take out the battery, put the software in download mode for the necessary images (=download to phone), and insert the cable while you 're pushing both volume buttons
Huawei Ascend G700 bootloop
Did n`t work for me. Does someone know serial connecting points for Ascend G700, or has .pdf or picture of electrical schematic?
I think , it may help much!
Thanks for answer anyway.
SAme problem Guys plz help and reply any solution
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.[/QUOTE]
went through same met with same
I have the same problem and tried many different solution but not working ((((((PLEASE HELP!!!
QUOTE=ashish18mohan;48673012]Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.[/QUOTE]
went through same met with same[/QUOTE]
okra9 said:
I have the same problem and tried many different solution but not working ((((((PLEASE HELP!!!
QUOTE=ashish18mohan;48673012]Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
went through same met with same[/QUOTE][/QUOTE]
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,
- install the program
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.
Sir
I guess I need more assistance from you if you don't mind.I have added my comments in red letters to your email below and if you can assist me on that it will be appreciated
Regards
jpsollie said:
went through same met with same
Click to expand...
Click to collapse
[/QUOTE]
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,(Which stuff are you talking please give me link about it )
- install the program Which program is this please link about it
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE]
okra9 said:
Sir
I guess I need more assistance from you if you don't mind.I have added my comments in red letters to your email below and if you can assist me on that it will be appreciated
Regards
Click to expand...
Click to collapse
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,(Which stuff are you talking please give me link about it )
- install the program Which program is this please link about it
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE][/QUOTE]
I think the program he is refering to is listed on that other thread that he refers to http://forum.xda-developers.com/showthread.php?t=2412017
The program hisuite is mentioned. just google hisuite and you will find the official Huawei website with the program download.
But a "dummies how to guide" could be useful if anyone that have done this themself could take the trouble to make one.
Personally I just have ordered and not received my G700 yet, and found this thread because I was planning to root and put CWM into it when I get it.
But reading this thread makes me a bit worried if its worth the trouble, as it sounds as its a common problem on these phones.
From what I read, rooting is rather safe, but the CWM part may brick the phone, is this correct?
Stuck at boot loop
jpsollie said:
went through same met with same
Click to expand...
Click to collapse
[/QUOTE]
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,
- install the program
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE]
->i used sp flash tool but the software is not detecting my phone even after installing MT65XX VCOM driver
->again the device show up only for couple seconds in fastboot mode like just detected and den removed.
-> tried pressing vol+ key battery removed and den pushing battery but nthng helped.
tried everything but m nt able to read the partition of my device. Plz suggest any alternative to push and replace recovery
Thanks
Cwm g700-u20 v100r001c00b110
Does anyone know how to install CWM recovery to this phone ? I have root this but mobileuncle doesnt install recovery, its just give me a bootloop.
I have tried this many times and many ways, just cant install custom recovery. Can someone help me with this problem ?
I too have the same problem
pihlaja81 said:
Does anyone know how to install CWM recovery to this phone ? I have root this but mobileuncle doesnt install recovery, its just give me a bootloop.
I have tried this many times and many ways, just cant install custom recovery. Can someone help me with this problem ?
Click to expand...
Click to collapse
Any solution yet ??:cyclops:
acacio23 said:
Any solution yet ??:cyclops:
Click to expand...
Click to collapse
nothing yet.
any solution i have the same problem
okra9 said:
Sir
I guess I need more assistance from you if you don't mind.I have added my comments in red letters to your email below and if you can assist me on that it will be appreciated
Regards
Click to expand...
Click to collapse
as I said, use the solution I posted ... I managed to recover my phone with bricked recovery, uboot & boot partition:
- download the original stuff on the page,(Which stuff are you talking please give me link about it )
- install the program Which program is this please link about it
- tell it to upload firmware parts 'boot' & 'recovery' & start it
- connect the USB cable, hold both volume buttons and then enter the battery. this may not be easy: windows will first need to install a CDC driver, so the first time you try to download it will certainly fail, but maybe the 2nd or 3rd time . You know you're in the good mode when your screen keeps blank.[/QUOTE][/QUOTE]
---------- Post added at 02:15 PM ---------- Previous post was at 01:47 PM ----------
pihlaja81 said:
Does anyone know how to install CWM recovery to this phone ? I have root this but mobileuncle doesnt install recovery, its just give me a bootloop.
I have tried this many times and many ways, just cant install custom recovery. Can someone help me with this problem ?
Click to expand...
Click to collapse
Hi how did you get out of the boot loop i have the same issue
Boot Loop
HI i have the same problem of HUAWEI G 700- 10 boot loop while installing CWM recovery using mobileuncle
any solution please
acacio23 said:
HI i have the same problem of HUAWEI G 700- 10 boot loop while installing CWM recovery using mobileuncle
any solution please
Click to expand...
Click to collapse
Read this thread, someone else managed to fix their phone with bootloop
http://forum.xda-developers.com/showthread.php?t=2412017&page=9
shortcopperjumper said:
Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
do u got the solution?
Mobile uncle tools problem
okra9 said:
I have the same problem and tried many different solution but not working ((((((PLEASE HELP!!!
QUOTE=ashish18mohan;48673012]Hi to all, my Huawei Ascend G700 that I just bought has gone into a bootloop. I have succesfully root the phone using Huwaei eroot software from as in the picture below but I havent flashed any custom ROM yet.
But then I want to install CWM recovery into the phone as it much feature rich that the stock e3 recovery. So I've downloaded the CWM recovery from the page in the picture below.
I used MobileUncle Tools to boot the CWM recovery & that's when the issue occured. It keep restarting after the Huawei logo. I cant even get into the recovery (by holding volume button up + power button). If I hold the volume down button + power button, a sentence " => FSATBOOT mode... " at the lower left corner of the screen will appear but the phone will reboot itself again & again. Please help. Thank you.
Click to expand...
Click to collapse
went through same met with same[/QUOTE][/QUOTE]
Hi i faced the same issue , the reason is mobile uncle told dint download the recovery image properly it was of 0 KB and i flashed it and error ..
still awating proper document to recover using sp tool recovery
Hi,
I installed TWRP 2.6.3.0 , after I restart my phone he stuck at the logo screen,
Can't go in recovery mode.
I tried connecet the phone to my computer (win 7) device manager unrecednaized it.
Need help what to do!!
Thanks,
I had similar with my p1 a couple of days ago. Turn off the handset. Hold volume up while turning it on, once you get to the huawei splash screen let go of the power but keep the volume up pressed. It should then open recovery after a few more seconds.
Fingers crossed it will work for yours too.
Sent from my GT-N8010 using XDA Free mobile app
Hello! I don't know where i should post this since the UMI X3 device isn't on this site, so i just post it here...
I installed a custom rom, now it's bootlooping.
If i turn it on it will show the little boot splash screen, then the screen will go black and usually it would show the boot loading screen but it doesn't, it reboots again to the boot splash screen.
I tried searching on google, but none of the forum posts actually helped me.
I try to holds down the power button and the volume up button at the same time, but it will just do the same bootloop thing.
The home button is a touch button, and i actually already tried holding down on that but it didn't work.
I also tried holding power button and volume down, and i tried holding all the buttons down at once (power + volume up and down)... also no succes.
Now it used to work, i got into some chinese bootloader before i installed this rom.
So, basicly it won't get into any recovery. I did install clockworkmod recovery actually and it did work, yet i needed to launch it via mobile uncle tools to get into it. I think im totally ****ed now...
Pleace, is there ANY way to solve this problem?
Problem in a nutshell:
Boot looping splash screen, can't get into recovery mode. (PS: i also tried to connect it via USB but it won't find my phone...)
- Kyran
UPDATE:
I'm now able to get into recovery mode!
However i can't mount usb.
Same problem
Kyranio said:
I'm now able to get into recovery mode!
However i can't mount usb.
Click to expand...
Click to collapse
Hi Kyriano,
I have the same problem after installing the cynogenmod, does your phone work now. How did you get in the recovery mode??
posible solution
Hi,
After struggling with this issue all day i found a quite simple solution.
The cause of the bootloop in my case was the simcard. So this is what i did:
1. remove simcard tray
2. Turn the phone off and on
3. If everything is ok the bootloop stopped, if not try to reboot again
4. Download mobileuncle in the playstore
5. Open the app click on; into recovery mode
6. Recovery will open and then hopefully you made a backup.Restore it and voila!
If you did not make a back try to flash the official umi ROM.
I hope this solved your problem to.
Greets ryan
i installed flashify onto my Huawei ascend mate 1, and install CWM. it asked to flash it, i pressed yes and it shutdown and won't boot normally, It's stuck on the logo mode.
if i press the power button for 10 seconds, it vibrates once before restarting normally and is stuck at the logo screen.
if i press volume - and power button simultaneously, same thing happens (note this is how i used to get into recovery mode before)
When i press the volume + and power button together after 10 seconds, it goes off and back on again Without the little vibration in the other cases, but gets stuck again
same thing happens when i hold down the 3 buttons all together.
i downloaded the stock rom from huawei's websit, put it into the dload folder and tried everything above 3 times. nothing happens.
i connect it to my computer for a chance to adb/fastboot, but in vain.
guys what can i do?
Hi, thank you for using XDA Assist. I'm going to move your thread here, http://forum.xda-developers.com/ascend-p6/ascend-mate where experts on your device can help you. You're probably going to have to flash the stock firmware on your device to get it working again.
jasonlarry.123 said:
i installed flashify onto my Huawei ascend mate 1, and install CWM. it asked to flash it, i pressed yes and it shutdown and won't boot normally, It's stuck on the logo mode.
if i press the power button for 10 seconds, it vibrates once before restarting normally and is stuck at the logo screen.
if i press volume - and power button simultaneously, same thing happens (note this is how i used to get into recovery mode before)
When i press the volume + and power button together after 10 seconds, it goes off and back on again Without the little vibration in the other cases, but gets stuck again
same thing happens when i hold down the 3 buttons all together.
i downloaded the stock rom from huawei's websit, put it into the dload folder and tried everything above 3 times. nothing happens.
i connect it to my computer for a chance to adb/fastboot, but in vain.
guys what can i do?
Click to expand...
Click to collapse
This is the Mate 2 Forums. Totally different device. You probably didnt unlock your bootloader. http://forum.xda-developers.com/showthread.php?t=2642403 Try there.
Moody66 said:
This is the Mate 2 Forums. Totally different device. You probably didnt unlock your bootloader. http://forum.xda-developers.com/showthread.php?t=2642403 Try there.
Click to expand...
Click to collapse
sorry, a moderator moved my thread here so i'm powerless. besides, the link you gave me works when the device is recognized by my computer, which isn't the case
jasonlarry.123 said:
sorry, a moderator moved my thread here so i'm powerless. besides, the link you gave me works when the device is recognized by my computer, which isn't the case
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=55361611&postcount=6
Also
http://forum.xda-developers.com/showthread.php?p=6124522#post6124522
Hey there this is my first thread guys help me I purchased an old s3 which works better for 2 months after that I was facing problems-
1. Error 406 on play store downloaded.
2. Reboot loop.
3. Apk not installing.
This was out of warranty so I given this to samsung care in 3rd day they said to me that phone is dead I searched on net about it and I find its hard bricked.
Now I can't get into restore mode or download mode I can't get charging message.
Please help me what should I do now.
pankaj186 said:
Hey there this is my first thread guys help me I purchased an old s3 which works better for 2 months after that I was facing problems-
1. Error 406 on play store downloaded.
2. Reboot loop.
3. Apk not installing.
This was out of warranty so I given this to samsung care in 3rd day they said to me that phone is dead I searched on net about it and I find its hard bricked.
Now I can't get into restore mode or download mode I can't get charging message.
Please help me what should I do now.
Click to expand...
Click to collapse
Connect your mobile to pc if it vibrates your mobile not hard bricked, you can unbrick your mobile via flashing stock firmware with odin
download stock firmware from SamMobile
Remove the battery & wait for 1 minutes. Then insert the battery.Connect your mobile to pc it will vibrate in 5 seconds(while vibrating Press and hold ‘Volume Down + Home + Power’ buttons together and release them once a Warning screen shows up on your device
Press ‘Volume Up‘ to accept the warning and boot into download mode.
Note- download mode only work when your press the the buttons while vibrating)
Open odin & flash stock Rom
Tq for reply but it does not vibrates I had tried I can't get into download mode tried almost all method to come into download mode. I don't tried jig or gtag I don't know how to do..
Device is totally blanked I m worring about it a lot...
Sent from my GT-I9300I using XDA Free mobile app