my note 3 is officially unlocked and currently with global beta rom. and I flashed Official TWRP with F2FS Support in http://forum.xda-developers.com/redmi-note-3/how-to/guide-redmi-note-3-available-twrps-t3406708.
I flashed it in fastboot mode with command: fastboot flash recovery recovery.img and it shows OK. However after that when I tried to reboot into recovery, all I can get is connect to cable picture. When I enter fastboot, I can see the bunny but my computer can not see any fastboot device anymore. I can boot in miui system and use the phone normally, just lost recovery and fastboot. How can I fix this? Thanks.
Related
Hey guys,
I flashed the latest official 32.4.A.1.54 (german unbranded) version through flashtool. I now want to install a custom rom but Im suddenly running into problems.
Here is what I did in order:
- Flash official 32.4.A.1.54 via Sony mobile flasher (wiped everything)
- Reboot, go through setup and enable OEM unlocking and USB Debugging
- Check if bootloader is unlocked (it is)
- Flash Zach's Kernel for 7.1.1 through fastboot (fastboot flash boot <name>.img)
- Flash Latest TWRP (tried many many different versions) (fastboot flash recovery <name>.img)
I can not get TWRP to work. When trying to boot twrp through fasboot the screen just stays black and the LED keeps on glowing in blue. Flashing TWRP to boot results in an immediate reboot too.
When I start the phone I can see however that the kernel did succesfully flash.
What is happening here, how can I solve it?
Edit: After doing the same procedure for the third time I could suddenly boot into TWRP. I still can not install it though.
Have you tried booting TWRP by holding volume down on power on?
(fastboot flash recovery <name>.img)
Click to expand...
Click to collapse
flash twrp to the recovery partition, rather than boot
fastboot flash recovery twrp.img
Edit: After doing the same procedure for the third time I could suddenly boot into TWRP. I still can not install it though.
Click to expand...
Click to collapse
that is weird
When u are in command screen connect fastboot mode and enter this code fastboot boot recovery.img
If it doensnt restart end enter twrp it mean you should solve driver or flashtool version problem.
Hello to all !
In order to install Lineage OS on my Xiaomi Redmi Note 5, I was trying to flash TWRP as recovery. I was able to run successfully command 'fastboot flash antirbpass dummy.img' to skirt anti rollback, then i execute successfully 'fastboot flash recovery recovery.img' command to flash TWRP, but no way to boot on TWRP.
I tried also to run command 'fastboot boot recovery.img' but while booting it stays stucked on MI logo.
While searching for a solution I inconveniently run command 'fastboot flash boot recovery.img', so now I'm in a bootloop on fastboot mode if I press volume down and power button, or MI logo if I start in normal mode.
I still have access to fastboot commands, do you know how I can do to fix it (and maybe a way to install TWRP correctly) ?
And I can not stop my phone, does it exist a command which allows to do this in fastboot or I have to wait for my phone to be without battery ?
Thanks in advance for your help !
Ivanov93 said:
Hello to all !
In order to install Lineage OS on my Xiaomi Redmi Note 5, I was trying to flash TWRP as recovery. I was able to run successfully command 'fastboot flash antirbpass dummy.img' to skirt anti rollback, then i execute successfully 'fastboot flash recovery recovery.img' command to flash TWRP, but no way to boot on TWRP.
I tried also to run command 'fastboot boot recovery.img' but while booting it stays stucked on MI logo.
While searching for a solution I inconveniently run command 'fastboot flash boot recovery.img', so now I'm in a bootloop on fastboot mode if I press volume down and power button, or MI logo if I start in normal mode.
I still have access to fastboot commands, do you know how I can do to fix it (and maybe a way to install TWRP correctly) ?
And I can not stop my phone, does it exist a command which allows to do this in fastboot or I have to wait for my phone to be without battery ?
Thanks in advance for your help !
Click to expand...
Click to collapse
I guess you have Redmi note 5 - codename: Whyred (Snapdragon 636 and with dual rear camera) so Redmi 5 plus doesn´t have ARB.
If the next recommendation doesn´t work you will find better guidance in the thread for your specific device https://forum.xda-developers.com/redmi-note-5-pro so is slightly different.
Flash again your stock boot image , reboot and check that USB debugging is enabled and start again the process:
Put TWRP in your sdcard and a copy with this name in your adb folder into pc, reboot to fastboot and first just boot to TWRP, don´t flash it in fastboot, use code
Code:
fastboot boot TWRP.img
then in TWRP flash TWRP file and flash dummy.img ARB. In the case that your counter is up to 4 here you will find the file to enable again fastboot mode https://forum.xda-developers.com/redmi-note-5-pro/how-to/index-everything-anti-roll-t3816219
Ivanov93 said:
I still have access to fastboot commands, do you know how I can do to fix it (and maybe a way to install TWRP correctly) ?
Click to expand...
Click to collapse
I will assume that you have the correct TWRP build for your device (do you have vince, or whyred?).
If you have the correct TWRP, then did you flash magisk or lazyflasher after installing TWRP?
MAAAN
Do like this: once you flashed type
Fastboot boot recoveryname.img
I am using a REDMI 3S(having MIUI 10). I unlocked it's bootloader and tried to flash TWRP recovery into my phone...I installed the adb and fastboot (1.30 as the latest ones were not installing).. and download the twrp.img and successfully flashed the recovery.... But as soon as I tried to enter the bootloader and enter into recovery mode.. instead of opening the recovery it boots into system and then when I open the recovery it opens the stock recovery....
I have also tried to directly open the recovery through the fastboot commands but it only boots into system.... I even tried to fastboot reboot and hold VOLUME(+), VOLUME (-), POWER BUTTON to open the recovery but it opens into system only... Please help me I want to install the recovery...
Hello I'm stuck at fastboot loop with my Mi A3 after flashing TWRP
Here is what I did:
1. unlocked bootloader
2. downloaded TWRP from here: dl. twrp. me/ laurel_sprout/twrp-3.3.1-0-laurel_sprout.img.html (cant post links, sorry)
3. installed it with fastboot flash boot twrp-3.3.1-0-laurel_sprout.img
After that the reboot is always goes into fastboot
I found the advice to change the partition - it was B and I set it to A and it could load the stock recovery, so I tried to flash TWRP again and it went to Fastboot loop again, on both partitions. No I don't know what to do.
command 'fastboot devices' - shows the device.
but I cannot boot into recovery, I tried holding power and volume up buttons many times, it always boots into Fastboot (screen with bunny and robot)
Please help!
Vsider said:
Hello I'm stuck at fastboot loop with my Mi A3 after flashing TWRP
Here is what I did:
1. unlocked bootloader
2. downloaded TWRP from here: dl. twrp. me/ laurel_sprout/twrp-3.3.1-0-laurel_sprout.img.html (cant post links, sorry)
3. installed it with fastboot flash boot twrp-3.3.1-0-laurel_sprout.img
After that the reboot is always goes into fastboot
I found the advice to change the partition - it was B and I set it to A and it could load the stock recovery, so I tried to flash TWRP again and it went to Fastboot loop again, on both partitions. No I don't know what to do.
command 'fastboot devices' - shows the device.
but I cannot boot into recovery, I tried holding power and volume up buttons many times, it always boots into Fastboot (screen with bunny and robot)
Please help!
Click to expand...
Click to collapse
Flash the boot.img of your current firmware version in twrp to both slots and flash twrp installer.zip afterwards then reboot. Now you will be able to boot as normal and have twrp installed also
Vsider said:
Hello I'm stuck at fastboot loop with my Mi A3 after flashing TWRP
Here is what I did:
1. unlocked bootloader
2. downloaded TWRP from here: dl. twrp. me/ laurel_sprout/twrp-3.3.1-0-laurel_sprout.img.html (cant post links, sorry)
3. installed it with fastboot flash boot twrp-3.3.1-0-laurel_sprout.img
After that the reboot is always goes into fastboot
I found the advice to change the partition - it was B and I set it to A and it could load the stock recovery, so I tried to flash TWRP again and it went to Fastboot loop again, on both partitions. No I don't know what to do.
command 'fastboot devices' - shows the device.
but I cannot boot into recovery, I tried holding power and volume up buttons many times, it always boots into Fastboot (screen with bunny and robot)
Please help!
Click to expand...
Click to collapse
Don't use twrp
It'll break userdata partition
Use shrp recovery
For Android 9
https://sourceforge.net/projects/mi...RP_P-v2.2-laurel_sprout-official.img/download
For Android 10
https://sourceforge.net/projects/mi...HR_Q-v2.2-laurel_sprout-official.img/download
Shrp installer Flashable zip after flashing ROM
https://sourceforge.net/projects/mi...ller-v2.2-laurel_sprout-official.zip/download
Rajendran Rasa said:
Don't use twrp
It'll break userdata partition
Use shrp recovery
For Android 9
https://sourceforge.net/projects/mi...RP_P-v2.2-laurel_sprout-official.img/download
For Android 10
https://sourceforge.net/projects/mi...HR_Q-v2.2-laurel_sprout-official.img/download
Shrp installer Flashable zip after flashing ROM
https://sourceforge.net/projects/mi...ller-v2.2-laurel_sprout-official.zip/download
Click to expand...
Click to collapse
TWRP breaks down? ? Man!! Everyone using it.
All the youtubers.
There is a stable twrp for a3
I have bricked my X3 SZ and worked 1 week to get it unbricked (bricked after update of Android 11) myself, even the service centre not able to restore it and told me that may be Motherboard Problem. Finally by flashing Android 11 Stock images (created using OFP to CMD file converter), I restore the phone. I tried with unlocked Bootloader mode, don't know about locked bootloader state.
Simply download the stock images from the link and boot into bootloader mode, connect to PC, open Minimal ADB Fastboot and flash with fastboot commands. Required USB, Realme, Android Drivers to be installed in the PC. All your data will be lost and do it at your own risk.
Download all the images (userdata, recovery, boot, vbmeta & dtbo) and copy to the Minimal ADB Fastboot folder, run the CMD prompt and run the following commands:
fastboot devices (to check whether phone connected successfully or not)
fastboot erase userdata
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash vbmeta vbmeta.img
fastboot flash userdata userdata.img
fastboot flash dtbo dtbo.img
fastboot reboot
Done.. your X3 SZ must reboot and starts, if not you need to work around or contact SC.. Good Luck
Link Deleted
Thx
EDIT: Very informative and useful!
Cant get magisk_boot.img to work. Going to try orangefox recovery to install Magisk (root).
Tried numerous times to install it (here) took 3-4 hours to get Python to work in windows 7 (cus missing libraries, and newer version dont work). Its bricked the phone 3 times now.
I tried to install TWRP but failed, after I tried Orangefox, successfully installed but not able to boot, rebooting into recovery only, then I flashed only boot image using fastboot and able to boot but lost Custom Recovery. After all I stopped trying anything on X3 SZ
please provide new link