Hi everybody,
i really hope someone can help me with the following issue. I am currently on ResurrectionRemix-M-V5.7.3-20160820-kenzo and i can't uninstall apps.
Everytime i click on "uninstall" my phone is rebooting (i instantly see the resurrection bootscreen then) when it's booted the app is still installed.
Also i can't change the displaylock. When i try to change the displaylock method, enter for example a pin and press "ok" it just throws me back to the settings
screen. Exactly this issue i have with other roms too.
So here once more shortly - CM related issues:
can't uninstall apps - reboot's
can't change displaylock method - crashes
I think this issue is related to CM itself, because i had exactly the same issue with CM13 Snapshot and also with all Nightlies above the latest Snapshot.
I also tried the last days the MIUI 8 developer ROM - 6.10.13 , there i didn't have this issue.
On MIUI i had other issues - for example:
heavy battery draining
lockscreen / fingerprint settings crashes permanently
bad performance
I still have a big logfile from MIUI which contains very much systeminformation.
I can also provide catlog files if someone tells me what actions i shall log?
What i already tried:
reinstall ROM
factory reset
tried different roms - not only CM
deleted settings data and retried
Did you install the CM firmware? Also that's a very old build of that ROM is it not?
It is the latest built , i just installed it today. So it is a fresh and clean Installation .
It's not the latest build. Please re-read the thread on the ROM. The version linked in the OP of that thread IS NOT the latest.
Okay, but are these issues related to the Version? AS i mentioned, i had same issues with cm13 snapshot and cm13 latest nightlies.
I downloaded and installed the Rom from here https://basketbuild.com/devs/resurrectionremix/kenzo
It is the latest!
mjrktrz said:
Okay, but are these issues related to the Version? AS i mentioned, i had same issues with cm13 snapshot and cm13 latest nightlies.
I downloaded and installed the Rom from here https://basketbuild.com/devs/resurrectionremix/kenzo
It is the latest!
Click to expand...
Click to collapse
Those are not the latest build. Check that thread again, there are link to the 10 Oct build somewhere there. And you need to flash CM firmware first before installing any official CM13 based roms.
Sent from my Redmi Note 3 using Tapatalk
Okay, i found a newer Version and installed it AS described. Still have same issues
Hey everybody, i want to share the status to this thread.
I flashed the latest "Radon" Kernel and all my issues disappeared. I can uninstall apps and change the lockscreen Method.
I just wanted to share this result if someone else has these problems. And also it means that anything might be wrong in the cm13 kernel.
Thanks again to all people responding to my thread
Radon kernel really worked
mjrktrz said:
Hey everybody, i want to share the status to this thread.
I flashed the latest "Radon" Kernel and all my issues disappeared. I can uninstall apps and change the lockscreen Method.
I just wanted to share this result if someone else has these problems. And also it means that anything might be wrong in the cm13 kernel.
Thanks again to all people responding to my thread
Click to expand...
Click to collapse
so, i was using cm13 for the last few months on my rn3pro.
since the very first install, i flashed radon kernel.
(i actually didn't know uninstalling apps cause soft reboot on cm kernel)
recently i flashed resurrection remix rom, didn't flash any custom kernel.
i was facing exact the same problem, phone soft reboots while uninstalling app....
flashed radon kernel, and problem's gone!
Related
Has anyone else had issues with gesture typing with Carbon? I like this rom since it has been very stable otherwise. I haven't updated to the latest yet since I read there have been some other issues.
The AOSP keyboard disappears immediately when I try to do some gestures.
EDIT: Updated to 2014-05-03 and installed JBX kernel. Problem still exists.
RanzQ said:
Has anyone else had issues with gesture typing with Carbon? I like this rom since it has been very stable otherwise. I haven't updated to the latest yet since I read there have been some other issues.
The AOSP keyboard disappears immediately when I try to do some gestures.
EDIT: Updated to 2014-05-03 and installed JBX kernel. Problem still exists.
Click to expand...
Click to collapse
It's the Gapps package you used not the ROM. Download another one and reflash the ROM with the new Gapps package.
For me, I was having the same issue with Slim minimal Gapps, and having the issue through several different ROM's. I don't have the problem now with Slim AIO.
If I helped hit the thanks.
Draxin said:
It's the Gapps package you used not the ROM. Download another one and reflash the ROM with the new Gapps package.
For me, I was having the same issue with Slim minimal Gapps, and having the issue through several different ROM's. I don't have the problem now with Slim AIO.
If I helped hit the thanks.
Click to expand...
Click to collapse
Yeah, I had stock gapps installed and I found out that AOSP keyboard doesn't work when Google keyboard is installed. Installed pa-gapps micro and now the problem is gone!
Hi Guys,
Made a Port Firmware [SM-T320] UNOFFICIAL Resurrection Remix for SM-T325.
Link to ROM v5.7.4: https://yadi.sk/d/pK5KobhEvubjq
Link to RRemixMod: https://yadi.sk/d/7D9tnSJe3AKA9j
Link to Gapps: https://yadi.sk/d/WJR5i3Qjr3Mje
Link to original: http://forum.xda-developers.com/galaxy-tab-pro-12-10-8/development/rom-unofficial-resurrection-remix-v5-7-t3411635
Thanks for separating the two devices... And best of luck on your development efforts!
Installed on mine: fantastic rom.Way better in performance and battery than cm13. No bugs so far
sent, me thinks
i appear to have a problem with contacts clear cache dalvik and data and flashed this rom and contacts on startup keeps getting errors ?
update :
its the gapps fault lol i downloaded a mini version and it seems fine now ) pico version seems to have a problem )
thnx for this rom bro
New version (5.7.3) uploaded.
See first post for download link
From mid-June after a kernel upgrade in SM13 stopped working USB-modem. This core of June 16, the modem works.
Kernel with support for the USB-modem (for TWRP):
Hi @promeo123, thanks for this great work of yours, I'm going to install this in my device sm t325, but I have question, do I need to flash also this kernel you posted above ^^^ ?
jga_143 said:
Hi @promeo123, thanks for this great work of yours, I'm going to install this in my device sm t325, but I have question, do I need to flash also this kernel you posted above ^^^ ?
Click to expand...
Click to collapse
If not using usb-modem, it is not necessary.
Hello!
I'm currently using CM12.1 ROM by crpalmer, if I want to install this ROM, will there be any bugs?
Thanks
justmoto92 said:
Hello!
I'm currently using CM12.1 ROM by crpalmer, if I want to install this ROM, will there be any bugs?
Thanks
Click to expand...
Click to collapse
Be sure to do wipe data, system, cache. Then the error will not happen.
Its been 2 weeks already after performing a clean install on my device, great experience with this rom. No lags, no bugs, super fast, with super long battery life! My question is how to take screenshot?
jga_143 said:
Its been 2 weeks already after performing a clean install on my device, great experience with this rom. No lags, no bugs, super fast, with super long battery life! My question is how to take screenshot?
Click to expand...
Click to collapse
Put a quick tile
sent, me thinks
Cissiboy said:
Put a quick tile
sent, me thinks
Click to expand...
Click to collapse
Thanks, I just found out that you can also enable hand gesture to take screenshot
New version (5.7.4) uploaded.
See first post for download link
Has anyone had any problems installing this? My device gets stuck on the welcome screen every time, I've tried the 5.7.4 and the 5.7.3 versions, with and without gapps. I wipe the device, dalvik and cache, flash the rom, and after rebooting the welcome screen where you pick a language shows up. I select a language, press the next button, connect to my wifi, and then it goes back to the welcome screen again and nothing more happens. Am I missing something?
Thank you for this great ROM!
For a long time I had a 5.1.1 ROM on it (Temasek) and thought that it's just the hardware of the tablet which doesn't allow for more battery life and more standby time. I used the tablet mostly as a kitchen radio because, with Viper4Android, the speakers are very loud and clear, ideal for spoken broadcasts.
Now, with this ROM, this has changed. The device is indeed resurrected! Especially the standby time is great now! The additions like Live Display are also welcome.
Roq4rt said:
Am I missing something?
Click to expand...
Click to collapse
Don't know if I understood you correctly. You flashed the gapps directly after flashing the ROM without letting it reboot, didn't you?
Think I had the same issue with this ROM on another device.
For being on the save side, I've wiped after flashing the ROM as well and then it worked.
Modified firmware ResurrectionRemix-M-v5.7.4-20160924-mondrianlte.
See first post for download link: https://forum.xda-developers.com/galaxy-tab-pro-12-10-8/development/rom-unofficial-resurrection-remix-v5-7-t3422525
1. Altered settings menu (cleaned and altered some points).
2. Remove some applications, as well as delete the themes.
3. Changed Trebuchet Launcher on Novalauncher.
4. magnify the screen
5. Embed the core of the latest firmware SlimRom6 (20170118)
thanks a lot for the work!
I'm a bit confused though, which link is for T325 rom? the 1st or the 2nd.... thanks!
Hi, are you going to bring an Android 7 version for the 325?
Dear All,
Good day to all of you, recently i has been try out the following Android Nougat 7.1 ROM for Redmi Note 3 Kenzo:-
1. crDroid v7.1 http://forum.xda-developers.com/redmi-note-3/development/rom-crdroid-android-t3483950
2. XenonHD v7.1 http://forum.xda-developers.com/redmi-note-3/development/official-xenonhd-7-1-t3492504
3. CyanogenMod 14.1 http://forum.xda-developers.com/redmi-note-3/development/rom-cyanogenmod-14-0-xiaomi-redmi-note-3-t3459382
4. AOSCP v3.1 (Nougat 7.1) http://forum.xda-developers.com/redmi-note-3/development/rom-t3481056
aside with the minor bugs on each ROM, i found out these ROM has a major bug whereby unable switch to Data connection automatically after disconnected from WiFi connection.
sometime needs to wait about 2 ~4 minutes only connected to data connection or worst still sometime need to restart the phone.
may i know did you guys having the same problem? any solution on this issue? if yes, please tech me how to do so.
thank you very much.
No problem at all on XenonHD and CrDroid.
No problem on CM14.1
Isn't this kind of thread more worthy of Q&A rather than Development?
Boa
EP21 said:
Isn't this kind of thread more worthy of Q&A rather than Development?
Click to expand...
Click to collapse
chinkc said:
Dear All,
Good day to all of you, recently i has been try out the following Android Nougat 7.1 ROM for Redmi Note 3 Kenzo:-
1. crDroid v7.1 http://forum.xda-developers.com/redmi-note-3/development/rom-crdroid-android-t3483950
2. XenonHD v7.1 http://forum.xda-developers.com/redmi-note-3/development/official-xenonhd-7-1-t3492504
3. CyanogenMod 14.1 http://forum.xda-developers.com/red...cyanogenmod-14-0-xiaomi-redmi-note-3-t3459382
4. AOSCP v3.1 (Nougat 7.1) http://forum.xda-developers.com/redmi-note-3/development/rom-t3481056
aside with the minor bugs on each ROM, i found out these ROM has a major bug whereby unable switch to Data connection automatically after disconnected from WiFi connection.
sometime needs to wait about 2 ~4 minutes only connected to data connection or worst still sometime need to restart the phone.
may i know did you guys having the same problem? any solution on this issue? if yes, please tech me how to do so.
thank you very much.
Click to expand...
Click to collapse
Enviado de meu SM-G935F usando Tapatalk
Any one facing the same problem with me? After trying clean flash all types of nougat 7.1 rom, the phone still will not automatically switch to data connection after WiFi disconnected or WiFi not available....
chinkc said:
Any one facing the same problem with me? After trying clean flash all types of nougat 7.1 rom, the phone still will not automatically switch to data connection after WiFi disconnected or WiFi not available....
Click to expand...
Click to collapse
Hey, I have the same issue ... But it's worst for me, I have no data at all. My APN is good and never has been an issue when i was on stock.
Did you find the solution ?
Didn't have such issue. It must have to do with the FW you're using, but still you can keep data on in developpers setting. This way you'll swap between wifi and data in no time . Hope it helps!
SpawnX1200 said:
Didn't have such issue. It must have to do with the FW you're using, but still you can keep data on in developpers setting. This way you'll swap between wifi and data in no time . Hope it helps!
Click to expand...
Click to collapse
Thanks for the tip ! I tried it all day and never had any data.
I was on MIUI 8.1.1.0 I think (the latest possible).
I officially unlocked bootloader, then fastboot twrp, then flash Nougat and gapps. I tried some kernels but no luck .... Same for roms RR, Slim, CM14.1 ...
Second try, i wiped all, flashed firmware from TheStrix, Slim rom, superSu ans Gapps. Still not working.
Any Idea ? Do I need to flash MIUI 6.x before going on Nougat ?
mstraa said:
Thanks for the tip ! I tried it all day and never had any data.
I was on MIUI 8.1.1.0 I think (the latest possible).
I officially unlocked bootloader, then fastboot twrp, then flash Nougat and gapps. I tried some kernels but no luck .... Same for roms RR, Slim, CM14.1 ...
Second try, i wiped all, flashed firmware from TheStrix, Slim rom, superSu ans Gapps. Still not working.
Any Idea ? Do I need to flash MIUI 6.x before going on Nougat ?
Click to expand...
Click to collapse
I was on MIUI 8 global dev and flash twrp and Nougat ROM+gapps like you did and didn't get too much issue with the data. I'd suggest you delete and re-input your settings. If still not good. Flash MIUI again and this time don't wipe system. Wipe everything else except system!
Well, I did a backup and a full wipe. Then I flashed the beta of this rom (the V3 follow the dl link and it will show up) https://forum.xda-developers.com/redmi-note-3/development/rom-citrus-caf-t3490675 then gapps and BOOUMM lte is working on 7.1.1
I was pretty happy with Slim Rom. I will try to flash it some time just to see if anything change.
Thanks for the help !
mstraa said:
Hey, I have the same issue ... But it's worst for me, I have no data at all. My APN is good and never has been an issue when i was on stock.
Did you find the solution ?
Click to expand...
Click to collapse
as of today, im using XenonHD latest 03 Jan 2017 official built...it has the same issues
SpawnX1200 said:
Didn't have such issue. It must have to do with the FW you're using, but still you can keep data on in developpers setting. This way you'll swap between wifi and data in no time . Hope it helps!
Click to expand...
Click to collapse
Hi..good day to you, may i know what ROM are you using now? TQ!
mstraa said:
Thanks for the tip ! I tried it all day and never had any data.
I was on MIUI 8.1.1.0 I think (the latest possible).
I officially unlocked bootloader, then fastboot twrp, then flash Nougat and gapps. I tried some kernels but no luck .... Same for roms RR, Slim, CM14.1 ...
Second try, i wiped all, flashed firmware from TheStrix, Slim rom, superSu ans Gapps. Still not working.
Any Idea ? Do I need to flash MIUI 6.x before going on Nougat ?
Click to expand...
Click to collapse
no... i dont think so..
chinkc said:
Hi..good day to you, may i know what ROM are you using now? TQ!
Click to expand...
Click to collapse
LineageOS...it's pretty much the continuation of CM.
Official Cyanogenmod 14.1 Motorola athene Released for Moto G4/G4 Plus.Find the below link for Download.
https://download.cyanogenmod.org/?device=athene
stkpxl said:
Yay! Guessing you need the latest soak test modem and bootloader to install though?
Click to expand...
Click to collapse
That's a negative. My understanding is the soak test is needed in the plus because of finger print scanner issues. I have the XT1625 and it runs great without the soak test. Flash the quark kernel too. Waaaaaay better benchmark results.
stkpxl said:
I just installed it. Definitely didn't need the soak test. VoLTE works too when I called my voicemail to check. No crash on the Gallery app either like I've seen reported. And the best part for me is that Republic Wireless works with it and the app works too! Usually they don't support custom ROMs but this time everything works.
Click to expand...
Click to collapse
Glad to hear you're all set up. Try quark kernel when you get a chance. Makes sure you get 2.0,because the other ones caused a boot loop for me.
I've just rooted my phone, I'm in 6.0.1, I just need to download and put this in SdCard, later Install w/o gapps and it will works?
I flashed the ROM and wiped and then flashed gapps, gallery is crashing for me.
mikemelbrooks said:
I flashed the ROM and wiped and then flashed gapps, gallery is crashing for me.
Click to expand...
Click to collapse
Same here, issues with gallery, I couldnt install Gapps, I got error code 20.
Mexickano said:
Same here, issues with gallery, I couldnt install Gapps, I got error code 20.
Click to expand...
Click to collapse
Were you trying to install the arm64 gapps? I could only install the arm gapps.
I updated to the last nightly build which seems to have fixed the gallery bug for me, but now the camera can't access the sdcard to save pictures or videos when the card is set as internal.
Running 12222016 as of this morning. Have been using it since it first hit the streets. Seems a little unstable. While it's running, it runs great. However, for no apparent reason it reboots my device. I can't seem to pinpoint the cause as it happens sporadically and randomly.
I noted that the blue light filter "sort of" works. It has to be manually activated. Tried the automatic route but it's hit or miss.
hooks024 said:
Glad to hear you're all set up. Try quark kernel when you get a chance. Makes sure you get 2.0,because the other ones caused a boot loop for me.
Click to expand...
Click to collapse
That would be because the "other ones" are for MM based ROM's and 2.0/2.2 are for Nougat.
mikemelbrooks said:
I updated to the last nightly build which seems to have fixed the gallery bug for me, but now the camera can't access the sdcard to save pictures or videos when the card is set as internal.
Click to expand...
Click to collapse
Fixed the camera by clearing the camera data and cache!
chrisjwild said:
Were you trying to install the arm64 gapps? I could only install the arm gapps.
Click to expand...
Click to collapse
Im a dumb, I was installing other gapps, now Im not getting any issue, only about video recording but I'll fix it flashing a boot.img.
Thanks to all.
I always install ROM boot it then go to browser and search Gapps it automatically finds the one I need then just download and reboot to recovery and install so I don't have any issues the Roms are all comparable for bothering devices but I think arm is different between devices if that helps anybody
:crying: Sad News Guys Cyanogen is shutting down all its services from 31st Dec 2016.
But
http://lineageos.org/
Hi,
I bought a Moto G4 for Christmas. I'll receive it tomorrow, and so I'm looking for a good custom rom. I had the Moto G 2014 LTE (thea) running CM14.1. I notice that the last CM build available for athene is the 20161225, and I'd like to know if it's stable. Does it have an option to make volume buttons control media volume instead of ringtone, for instance ?
Thank you, 'n have a nice day !
Yo is cm 14.1 gonna get xposed
I installed the CM 14.1 12/25 nightly on a XT1625 motoG4 non-plus. Upon reboot, the OS asked me to input my password. It was unable to decrypt my data.
I had a pattern PIN, so I looked up the proper numeric sequence and entered it, and the OS told me "my password was correct but the data was corrupt" and suggested I wipe my phone.
I tried this several times with different passwords, and even with completely incorrect passwords it said it was correct but the data corrupt. So I had to wipe my data. After wiping data, nougat 7.1 came up fine.
Note I have a SDcard set as adaptable storage. My guess (and it is only a guess) is this is what screwed me over.
Has anyone been using this for a while? I know it's nightly, but just curious if it's mostly usable. Would like to get off MM and tired of waiting for Official Nougat
slatteew said:
Has anyone been using this for a while? I know it's nightly, but just curious if it's mostly usable. Would like to get off MM and tired of waiting for Official Nougat
Click to expand...
Click to collapse
You can use the latest official version of CyanogenMod. So far I had neither bugs nor crashes. The last version is cm-14.1-20161225-NIGHTLY-athene.zip
Otherwise, you can also use the official soak test from Motorola. This is also based on Anroid 7.0
yakzockt said:
You can use the latest official version of CyanogenMod. So far I had neither bugs nor crashes. The last version is cm-14.1-20161225-NIGHTLY-athene.zip
Otherwise, you can also use the official soak test from Motorola. This is also based on Anroid 7.0
Click to expand...
Click to collapse
Thanks! I found the latest Nightly and also an updated LineageOS (replacement for Cyanogen since they've stopped) version, might try them both out. I was perusing the Soak Test and saw it doesn't work with XT1625 devices unfortunately. I have the XT1625 non-Amazon version with Republic Wireless. Saw someone posted earlier in this thread that Republic Wireless was working fine on CM 14.1 Nightly, so that gave me some incentive as well.
Build 02/06/2023 #OPO
Telegram Group: https://t.me/TugaPowerOPO
#TugaPower R 11.0.0_r46 1.0 LineageOS #laos #OnePlus
If you have some spare bucks consider donating, it will be really appreciated: https://www.paypal.me/TugaPower
If you are on other base rom, best practice is to factory reset prior to flash rom and new gapps.
After this steps if rom does not boot, probably you are encrypted, remove encryption and repeat the steps.
If after removing encryption rom still does not boot, make a factory reset again after flashing rom and gapps, then all will be fine.
Please be sure you are using one TWRP that can handle firmware flash
Advise to use latest official TWRP
Also be sure you are using proper firmware.
Relative to gapps, the advised ones is pico package since nano its now too big to install ( ARM):
OTA built in on rom for updates easly
Three fingers screenshot ( enable in settings over gestures options )
Support out of the box to microG GmsCore ( https://forum.xda-developers.com/t/...oftware-clone-of-google-play-services.3217616 )
No more need to make microG system app
PoGO: Gonna catch then all ( Always report using real GPS in case of mock location been used )
Nethunter/Kali supported
What does not works:
Let me know to add to second post
Download: https://cld.pt/dl/download/16e0f9e9-8f40-4f8d-8142-46bf5088f201/TugaPowerR2_OP1.zip
MD5: f064915c3dbb1fc4cc3d1fae0b62a623
Please dont mirror for now the roms zips, thanks
Sources :
Rom:- https://github.com/LineageOS
Device:- https://github.com/LineageOS/android_device_oneplus_bacon
Kernel:- https://github.com/LineageOS/android_kernel_oppo_msm8974
Place HOLDER for bugs !
Down link not working.
Gold Ribbed said:
Down link not working.
Click to expand...
Click to collapse
Fixed, bad copy paste, thanks for reporting that !
I have one question, does this rom supports DRM content and apps based on it?
Thanks for this Rod. Working good for me.
Not too much different from normal LoS but appreciated, thanks for keeping the OPO alive. Checked it out and everything is working smoothly, no major bugs, crashes or anything so far.
oneplusausage said:
Not too much different from normal LoS but appreciated, thanks for keeping the OPO alive. Checked it out and everything is working smoothly, no major bugs, crashes or anything so far.
Click to expand...
Click to collapse
Thats normal, the base it self its Los, the diference its on having 3 finger screenshot, microg nogapps support, nethunter support and mock locations apps the system report real GPS instead of mock app ( Pokemon will not ban for using mock location app ), support for face unlock its WIP ( no eta )
Hi, I've read somewhere that for new roms (Starting from Android 10) need to resize system partition. I've currently run 7.1.2 Rom, do I need to do the resize for this ROM? Thanks!
saphta said:
Hi, I've read somewhere that for new roms (Starting from Android 10) need to resize system partition. I've currently run 7.1.2 Rom, do I need to do the resize for this ROM? Thanks!
Click to expand...
Click to collapse
If the rom fail to flash its because you need to make that, but on OPO if you did not messed with the partitons before you will be probably just fine flashing and no need to resize. The issue is not really rom problem, the problem its when flashing gapps that will ask for more space, but that is most for bigger gapps packaging, it you use the nano or base package you will have no issues flashing. Sorry for late answer mate !
Hi Daniel, thanks for your reply! Will probably use a pico gapps package. Anyone used MindTheGapps?
saphta said:
Hi Daniel, thanks for your reply! Will probably use a pico gapps package. Anyone used MindTheGapps?
Click to expand...
Click to collapse
One or another should be fine, if use open gapps pick the small package and then install the rest trough Play Store !
Will do! thank you very much!
I'm not able to flash opengapps pico : error 70
I tried to resize system partition but not being able...
@danieldmm can you help me?
@danieldmm
I can confirm what amadeumagalhaes wrote above. Gapps pico won't install.
I've installed Magisk, got root and I tried deleting some system files to make more space but all apps I've used gave me the same message: uninstall failed. I used SD Maid, System app remover, My Android Tools.
Any ideas?
P.S.1 Instead of opengapps pico, I've flashed mindthegapps. No issues flashing it even if it's larger than opengapps pico. The issue with deleting system files remains unchanged.
Hi all,
Found one bug, after installing Signal. On video calls, my video is overexposed. Anyone else has this problem?
saphta said:
Hi all,
Found one bug, after installing Signal. On video calls, my video is overexposed. Anyone else has this problem?
Click to expand...
Click to collapse
A bunch of us had this same problem with @Tomoms ROM. He managed to fix this in recent releases.
I have no issues on whatsapp. On Tomoms ROM thread it says to restart the app until the overexposure is gone.
Well, its being a while guys, updated OP with 2.0 build done today.
TugaPower R 2.0 2023/06/02
https://cld.pt/dl/download/16e0f9e9-8f40-4f8d-8142-46bf5088f201/TugaPowerR2_OP1.zip
MD5: f064915c3dbb1fc4cc3d1fae0b62a623
If you have still 1.0 you cannot use OTA since the system its down, to use OTA you need to update the Updater you have on 1.0, will drop on bottom a update apk of Updater if you are on 1.0 and prefer to use OTA, just install as regular app updating the system one. And then use the built OTA to update from 1.0 to 2.0, you can also check the change log after updating the updater, its too big to post here, it have all the changes commited to lineageos since my last build. Enjoy guys, long live to OPO