Hi all,
I have a Teclast X80h and I flashed the Android 5.0 v7 mirek's ROM to it. It's original stock ROM was 4.4 Jellybean.
With the new firmware the display resolution and the touchscreen resolution is not the same.
If I move my finger on the screen then the contact indicator moving only on a pretty smaller area, maybe 20% of the display size.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
See the attached picture. (If I touch at the big dots, it reacts at the small dots inside the yellow marked area.)
It is almost useless. At the moment I navigate with a mouse on the OTG.
What I tried:
Download a calibration software
Failed it. I can not found any. Only sensitiveness calibrators exists for Android. On Windows You can calibrate coordinates, but on Android... Somewhere I read that the calibration data is hardcoded in the kernel.
Compare the stock ROM with the newly installed one, search for differences on drivers or config files.
The .idc files are the same in /system/usr/idc, and the .drvb files are the same in /system/vendor/firmware.
Modify the .idc file in /system/usr/idc
I found some content at Android's site about the Input Device Configuration files.
I tried the following parameters:
touch.scale (but it is corresponds to contact area size)
raw.x.max (the maximum of the raw value received from the touchscreen)
output.width (the displqy coordinate to associate to the max raw value)
Anyway I tried almost all touch.* raw*. and output.*
Nothing helps.
BTW the uploaded firmware was created for another but very similar model X98 Air.
This firmware must work on this model as shown in a Youtube video "X80h Android 5".
Note: I have the skills to extract a ROM or decompile an .apk!
Should I replace a driver? Or is there a handful software?
Should I modify another config file? Or the kernel?
Thanks guys
The picture not shows. You trying change the lcd density? if u port rom for other device whith more screen resolution, and not change the density, the icons and apps shows different in size.
go to build.prop and find :
Code:
ro.sf.lcd_density=xxx
compare whith stock rom and edit same the stock, for example for 480x854 resolution
Code:
ro.sf.lcd_density=240
then the resolution now shows normal.
Hi xdedeone,
You are right about there was a wrong value at this property.
I tried it, but the only thing hapened is the resolution of the LDC changed, but the original problem is already there. The response of the touch is in a scaled down area.
Touchscreen recalibration
@Woohoo82 did you manage to sort this out? I'm having the exact same problem. All properties in /system/usr/idc/fts_ts.idc make no difference except touch.deviceType (which allows me to use a pointer instead..)
Woohoo82 said:
Hi xdedeone,
You are right about there was a wrong value at this property.
I tried it, but the only thing hapened is the resolution of the LDC changed, but the original problem is already there. The response of the touch is in a scaled down area.
Click to expand...
Click to collapse
Woohoo82 said:
Hi all,
The ROM you have installed is not for your device. Somehow the ROM or Firmware you installed got matched with your chip-set, so there is no problem with the software, but the problem persists in hardware, I mean the touch screen digitiser. I think, there is no way to make the touch work on the whole area of the screen. Either you have go back to the previous ROM, or if you are quite patient then you can edit the ROM & change the resolution of your digitiser. I don't know it will be possible or not, but downgrading to the previous ROM will solve your problem.
Click to expand...
Click to collapse
The solution
jony_adamit said:
@Woohoo82 did you manage to sort this out? I'm having the exact same problem. All properties in /system/usr/idc/fts_ts.idc make no difference except touch.deviceType (which allows me to use a pointer instead..)
Click to expand...
Click to collapse
Hi Jony,
I solve the problem by flashing a newer ROM to the device. I found an Android 6.0 ROM for this model.
Related
I found the 20 keys keypad on CNN.CN
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A good try would be to adapt this keyboard on a 16 keys niki and see if it works.
As anyone tried something likely or has an opinion on this ?
Thanks and keep up the good work, I'm often just watching these theads
I am absolutely willing to try it,
is this only this only the keys or the electronics included (switches etc.) ?
I can't see any connectors ...
Additionally, i think there must be some kind of software mod so that the operating system nows the right keyboard layout to apply.
Or are they compatible ? (i.e. can you flash the same rom on 16 and 20 key models and os switches automatically ? ..)
Did someone open the Niki before ?
I'm absolutely willing to try yo as soon as i get an azerty keyboard (e.g. french and not us
I would be very interested to know if this is possible.
AFAIK the software on 16 / 20 key versions is identical, ie. a rom from a 16key device can be flashed on a 20key and the keyboard works fine.
I suppose what we need now are disassembly shots of the Nike showing the keyboard in detail.
...
Don't think it will work.
In the NAND are so many references about the 16Key or 20 Key version.
I bet it would be possible. Theoretically, all you would have to do is replace the keyboard and then re-map the keys under the keypad. Unless the buttons under the keypad are layed out differently of course.
I'm sure there is software somewhere that could do this.
Has anybody tried it??
Nixu
From my understanding, the drivers for the 16 key Nike and the 20 key Nike are included in every ROM so it should only be a matter of instructing the ROM which driver to use for the keyboard and replacing the actual keypad with the 20 button one and you should be set.
I lucked out. The Nike I bought off ebay is already a 20 button model so this doesn't really apply to me but I think this is an interesting project.
EDIT:: After doing some more digging it doesn't seem this will ever work.
Here is a photo of the 16 key and also a photo of the 20 key. As you can clearly see, the buttons on the left and right of the key are larger(twice the size) of the ones on the left and right side of the 20 key so that means that the ribbon cable under the keypad would need to changed and then someone would have to figure out a way to get the device to recognize the new ribbon. This shouldn't be too much of an issue as seeing as how ALL ROMs have both drivers.
ok...i can confirm, hardware is different...argh
just ordered an oem keyboard...
ok...i have the 20key keyboard now, just installed it, booted into wm, QW launches internet explorer ,AS launches start menu (like the 16key version), L is backspace, ZX is message, OP DEL ENTER ALT doesn't do anything. so i hard reset the dual, and after that the same thing still happens
any ideas, anyone?
...
we played with the PID (product information Digit) and it loaded some
different keyboard layouts. u should be able to patch this xD but u need time, to find out what u have to patch...
The other thing is... after booting in the OS there was the right Keymapping,
i think u only have to patch the keypad driver^^
Valvarin said:
we played with the PID (product information Digit) and it loaded some
different keyboard layouts. u should be able to patch this xD but u need time, to find out what u have to patch...
The other thing is... after booting in the OS there was the right Keymapping,
i think u only have to patch the keypad driver^^
Click to expand...
Click to collapse
ok...can you tell me how? or point me to somewhere that talks about this. i am still quite new to windows mobile (only really started you use my touch dual for about a week, never used wm before...always been a palmos user)
just to try my luck, i reflashed the rom (tom's rom, v2.1.3, WWE) but that doesn't help. the keymapping is still wrong.
thank you very much!
http://rapidshare.com/files/194915053/SubDisplayDll.dll.html
1)install SdkCerts.cab
2)Simply copy the file of Subdisplaydll.dll in the folder of Windows on qtek 8500 farther in Resko Explorer find this file through a search, further press properties and put marks on Read - only, Hidden, System
3) Reset device
Zakr said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Simply copy the file of Subdisplaydll.dll in the folder of Windows on qtek 8500 farther in Resko Explorer find this file through a search, further press properties and put marks on Read - only, Hidden, System
http://4pda.ru/forum/dl/post/174685/SubDisplayDll.dll
Click to expand...
Click to collapse
Hi friend
A link to russian forum with some unknown characters & finally everybody must register at forum !!
Do you have a valid link for download ?
Yes, http://rapidshare.com/files/192400269/SubDisplayDll.dll.html
Thanxxxxxxxxx ....
Possibly today yet will do a clock
I copied the file and set the attributes but external display stays black ...
and i haven't backup of old file
strange... already two men said me about it.... regarding your problem: simply udali this dll, and the old will return... what version of sewing do you have?
For whom did begin to work?
Thanks, the dll has returned! My mobile is qutek 8500 with wm6.1 standard from erofich. But... Instead of the htc logo,why not put a naked woman?
picture it is possible any to do)))
Hi friend
can you write a analog clock ( like this ) plug-in for our homescreen ?
slavix said:
Thanks, the dll has returned!
Click to expand...
Click to collapse
My external screen is blank, how did you make it work? I set the attributes as instructed but I can't seem to get it to work...
slavix said:
Instead of the htc logo,why not put a naked woman?
Click to expand...
Click to collapse
Nice one... While your at it why not make it animated.
it is necessary to make attempt
Pampooh said:
My external screen is blank, how did you make it work? I set the attributes as instructed but I can't seem to get it to work...
Nice one... While your at it why not make it animated.
Click to expand...
Click to collapse
Simple delete the subdislpaydll.dll file and the old return (i think because ot is read only memory), but the zark clock didnn't work form me.. i don't know why
Thanks slavix for the reply, but I already reflashed the phone (Good thing I had a backup)...
Hey ceramic, were you able to make it work, if so, how?
***To those who are planning to download, I advise you to wait for somebody to confirm that it works, a working instruction on how to make it work would not hurt either...
Pampooh said:
Hey ceramic, were you able to make it work, if so, how?
***To those who are planning to download, I advise you to wait for somebody to confirm that it works, a working instruction on how to make it work would not hurt either...
Click to expand...
Click to collapse
Hi Pampooh .
No , I can't do that . but you can use from " Retro Clock " :
Download link :
PHP:
http://www.mediafire.com/?sharekey=3f170ab2c540aa9061d4646c62b381cbe04e75f6e8ebb871
how can i change the pic ??
and no, i haven't download it yet. i'll download it after i know how to change the pic.
Friends, I noticed the jamb, now again began to be scratched with dlkami, now will lay out a working version
http://rapidshare.com/files/194915053/SubDisplayDll.dll.html
1)install SdkCerts.cab
2)Simply copy the file of Subdisplaydll.dll in the folder of Windows on qtek 8500 farther in Resko Explorer find this file through a search, further press properties and put marks on Read - only, Hidden, System
3) Reset device
Unbelievable but it works only digital clock 2, the other remaining original!
Hi everyone,
I need some help with my Android radio.
A couple of days ago i bought an Android 4.2 2DIN car radio: http://www.ebay.com/itm/191227453040
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The buttons on the front panel at the side of the screen did function properly, but after a factory reset the buttons do not work anymore, and I can't get them to work. The only 3 things that do work are volume, power and cd eject.
How I managed to wreck it:
First thing I did, was getting root.
For that, I followed the instructions at this thread (using Root Master):
http://forum.xda-developers.com/showthread.php?t=2660662
After a succesfull root, I forgot making a back-up
I installed "[root] live logcat": https://play.google.com/store/apps/details?id=eu.chainfire.livelogcat
After installing it, I restarted the device and I saw the logcat boot animation, but after the animation finished I always ended up with a white screen... (http://youtu.be/oPyfJUHzZXQ)
I managed to recover from this by executing a system recovery from recovery mode.
Now I have a functional rooted android device, but somehow the front panel buttons aren't working anymore.
I also tried "CarAudioService" (http://forum.xda-developers.com/showpost.php?p=53678587&postcount=1179) but nothing gets logged.
System information:
MCU version: MTCB-GS-V1.91
Model: S07
Android version: 4.2.2_20140724
Kernel: 3.0.36+
Build: rk30sdk-eng4.2 20140724.11:11:18:04
Could anyone please advice me what to do?
Best regards,
Erik
150
Is there anyone who can help me with this problem?
How you did the system restore ?
Sounds like you used the wrong MCU file.
Warlord711 said:
How you did the system restore ?
Sounds like you used the wrong MCU file.
Click to expand...
Click to collapse
Thanks for your reply Warlold711.
What kind of strange was, is that I could execute a system restore without even putting any rom / image / MCU file on the system. So it restored something that was already on the device when bought... Is there a specific MCU I should try?
Does anyone else has an idea how to recover from this?
3514
Or if someone knows what MCU to use for this radio. I have searched the forums and found this thread but I haven't found out what MCU to use for sure.
* bump * Maybe someone knows the download link of the MCU 'MTCB-GS-V1.91' so I can re-apply it to my device?
After another search I've found the appropriate MCU at the following link:
https://drive.google.com/folderview?id=0BxmzvLRI7-eNeVA2SWkwM1pLZ28&usp=drive_web
I installed "V_2.02_GS_(20140827)" and now the physical buttons are working again!
Hello. I just watched your youtube video. Were you ever able to get live logcat to work correctly? Thanks.
striker1211 said:
Hello. I just watched your youtube video. Were you ever able to get live logcat to work correctly? Thanks.
Click to expand...
Click to collapse
Hi. Unfortunately I haven't. To be honest I didn't even retry after system recovery, scared of wrecking it again I didn't think it was worth trying again.
Playing DVD disc in fullscreen on Android 4.4 Car radio
I just replaced the factory installed radio with an Android 4.4 car radio unit with DVD player and Navigation. Everything seems to work fine, except the video playback from DVD discs. It seems that the video playback is in fullscreen mode. It has 2 black bars at the top and bottom, and the video seems squeezed vertically. Anyone has similar problem? Is there a fix for this? I noticed that in the video player, there's a button to resize the video screen, but there isn't one in the DVD player app. Can I replace the current DVD player with another one? If yes, which one and how? Thanks.
Hi All! I just got a new phone... It's a Chinese phone with no apparent brand.
Unfortunately I tried to root it and while using SP Flash Tool and MK Droid Tools I bricked it , Now i've been trying for days flashing different roms for similar phones in the hopes that one will work. One kinda worked but was the wrong resolution and I couldn't use it... I don't even remember which one it was.
Before doing this I tried to back up my images, but I am an idiot and didn't do it right. I have a scatter file and some other images from my original rom... but nothing beyond the recovery partition. Here's the list of files I have from the original phone:
MT6572_Android_scatter.txt
preloader.bin
MBR
EBR1
uboot.img (renamed to lk.img)
boot.img
factory_NONmodified_recovery.img
nvram.bin
pro_info
protect_f
protect_s
seccfg
I have also attached the scatter file in case anyone finds it useful.
If anyone can help me find the missing files or a different factory image, I'd greatly appreciate it! Below are specific details about the phone... maybe there's one that you guys know about that fits it? Also, if i try a different rom... which parts of my original rom should I still flash in, and which parts of the new rom should I flash?
Thanks alot!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here's what I got, including details from the FCC
2ADBRK968 by Shenzhen Kaliho Technology Development Limited for smart mobile phone
Product: smart mobile phone, Marketed as MTK6572 solution 3.5inch cheap 3G android smart phone K968
Trade Name： KALIHO, K-CEL, K-TEN
Model Number：K968
Serial Model：A600
Screen: TFT 3.5" HVGA(480x320) Capacitive touch screen
Operation System: Android 4.4.2
Features: 3G, Bluetooth, Email, WiFi, FM Radio, MP3 Playback, QWERTY Keyboard, Touch Screen, Dual Sim Card, Auto Focus, Built in Flash
Processor: 1.3 GHz Dual-Core Processor
Chipset: MTK6572
RAM: 256MB
ROM: 2GB
Cameras: 0.3MP+0.3MP Front/Back Cameras (I actually think the back one is 2MP)
Frequencies: WCDMA 2100/850MHz (1900 Optional) and GSM 850/900/1800/1900MHz
Dual-Sim card slot
External Memory: MicroSD up to 32GB
Click to expand...
Click to collapse
FCC Page: http://fccid.net/number.php?fcc=2ADBRK968&id=477292#axzz3RxdczcMd
Product Info/sale: http://oemfone.en.alibaba.com/produ..._5inch_cheap_3G_android_smart_phone_K968.html
I think it might take a while till i get any response, so still trying myself.... I'm looking around to see if anyone has a working phone that is like mine, but until then I'll still try roms for devices similar to mine, but i have a question, maybe I should post it on a new thread?
How do i find out what's going on whie the device is booting? it gets to the splash screen, i can get to recovery as well, but I want to know what's going on during the boot process... adb logcat does nothing but say -waiting for device-
Is there another way?
Thanks again!
I wasn't sure wether I should create a new post or just reply here, so i just went with reply
After looking I was finally able to get a dump of the stock rom from someone with an identical phone, and in the spirit of openness, I'd like to share it with you guys if anyone ever needs it.
Link: http://www.mediafire.com/download/9zkfz9n7hyiy8k6/A600_MT6572_ForFlashtoolFromReadBack.zip
You can flash this rom using SP Tools. Also, the phone will not boot immediately after flashing this rom... first you need to start the phone in (bootloader?) mode by holding the vol. Down and power. Once you're there do a factory wipe... technically this should be done in recovery mode, but idk how to do it with this rom because there's no "Yes" option when recovery asks you if you're sure about a factory wipe. Maybe it's hidden with some sort of key combo? idk, do it how you prefer.
Well, thanks, if you have questions let me know
I took some time and edited the original media_profiles.xml. I managed to turn off jpeg compression which should in return rise the quality of pictures taken by our Honor 7's. There are less artifacts in the pictures and they're a little bit better in case of quality, I think. But I guess You should try and see for Yourselves if it really works better, so feedback is really appreciated.
Modification is based off of the B320 Marshmallow rom for PLK-L01 but it should work on any other variant as well as on Android Lollipop - I also need feedback on this.
Requirements:
-TWRP Recovery
-zip package with modified media_profiles.xml downloaded from here:
https://onedrive.live.com/redir?resid=5BCB034BE136FE72!1093&authkey=!AC2X7f57mBjoZ0s&ithint=file,zip
What to do:
1. Transfer the zip into Your Phone (internal or external, doesn't really matter)
2. Boot Your Phone into TWRP Recovery
3. Flash the mod package.
4. Reboot Your Phone. From now on, there should be no jpeg compression.
Effects (no compression on the right):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WARNING!!! Be aware that turning off compression for images results in increasing file size of photos (even double)!!!
I don't take responsibility for any bricked device!!
Will this apply to the stock camera app only or system-wide?
It changes the way system handles any codecs so I think it should work with 3rd party camera apps.
TWRP is for android 5 (Emui 3) firmware B180 or android 6 (Emui 4) firmware B320 ?
Thank you
Dziekuje... [emoji2]
Odoslané z PLK-L01 pomocou Tapatalku
You can find both. TWRP 2.8.7.0 is for Android 6.0, and 2.8.6.0 is for Android 5.
Tapnięte za pomocą Honoraty Siódmej
But change also video and audio quality?
I attached here the original file if someone want do a rollback.
(For newbie: only copy this file in system/etc and not flash with TWRP)
Yeah, I tried but the camera doesn't seem to support that kind of bitrate and it stays stock even though there are changes in mediaprofiles. It won't break anything, don't worry.
I've already tried Video bitrate stay to stock, but audio bitrate is increased.
Put this mod has fallen off WI-FI,although the links are not watching.The file rollback the situation is not corrected...
enzelado said:
Put this mod has fallen off WI-FI,although the links are not watching.The file rollback the situation is not corrected...
Click to expand...
Click to collapse
Rollback file should not be flashed with twrp. Must be only copied in system/etc
Media profiles has nothing to do with wifi. I'm using that modified file on my Honor and everything works fine.
Tapnięte za pomocą Honoraty Siódmej
It also wifi stops working after this Zip, so there will be something.
can not retrieve the IP address.....
How it back?
majkyke said:
It also wifi stops working after this Zip, so there will be something.
can not retrieve the IP address.....
How it back?
Click to expand...
Click to collapse
Same....
KaciPL said:
Same....
Click to expand...
Click to collapse
same....
I applied the mod and wifi still working perfectly. Also, as you can se in first page, the modification at the code concern only the "media parameters" nothing to do with wifi...
Only thing that comes to my mind is that You guys use different Honor 7 version. I have a PLK-L01. Maybe if You have any other version like PLK-AL10 it does something to the wifi, but as far as I'm concerned, it does not touch the wifi nor any of its settings.
I have too PLK-L01 and wifi dont work for me.
What rom? Rooted?
Rom by Yoda v2 / rooted
Same for me, everything works fine. I have no Idea where the problem is.