Related
Can anyone help me get set up with CWM recovery on my generic A13-MID tablet? I have been searching forums and google for quite a while and have not found the information I am looking for. I have a 7" tablet running Android 4.0.3 (rooted). I have installed plenty of custom roms, etc on my droid phone, but I am new to the tablet and with a knock-off device, I am really struggling to find the info I need. One obstacle is that for physical buttons I only have a Volume +/- and Power (no back button), but I have read that people have installed CWM with touch capabilities instead of having to use the physical keys. I just really want to be able make a nandroid backup of my current working system...any thoughts??? Thanks!
ockicker13 said:
Can anyone help me get set up with CWM recovery on my generic A13-MID tablet? I have been searching forums and google for quite a while and have not found the information I am looking for. I have a 7" tablet running Android 4.0.3 (rooted). I have installed plenty of custom roms, etc on my droid phone, but I am new to the tablet and with a knock-off device, I am really struggling to find the info I need. One obstacle is that for physical buttons I only have a Volume +/- and Power (no back button), but I have read that people have installed CWM with touch capabilities instead of having to use the physical keys. I just really want to be able make a nandroid backup of my current working system...any thoughts??? Thanks!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=33349032#post33349032
here u go this cwm is working perfectly for all allwinner a13
icoolguy1995 said:
http://forum.xda-developers.com/showthread.php?p=33349032#post33349032
here u go this cwm is working perfectly for all allwinner a13
Click to expand...
Click to collapse
Thank you, I will give it a go later today. The only other thing that concerns me is the lack of a Back button on my tablet. Do you think I'm going to run into problem while in CWM without the ability to hit a Back button?
Thanks!
ockicker13 said:
Thank you, I will give it a go later today. The only other thing that concerns me is the lack of a Back button on my tablet. Do you think I'm going to run into problem while in CWM without the ability to hit a Back button?
Thanks!
Click to expand...
Click to collapse
Just flashed CWM per your instructions - very nice! Only other question I have is how to get to CWM manually (not form novo7tools) when the tablet is off...I tried the usual Volume Up + Power, but I get nothing.
ockicker13 said:
Just flashed CWM per your instructions - very nice! Only other question I have is how to get to CWM manually (not form novo7tools) when the tablet is off...I tried the usual Volume Up + Power, but I get nothing.
Click to expand...
Click to collapse
just press the power button with volume up for 5 to 8 seconds the release the power button !
I actually can't get it to boot to CWM with the hardware buttons...not sure what's going on, but hopefully I won't get to the point where I need to do that.
try with volume down button !
did you have any problems installing the usb drivers, if not can you post the drivers you used as I have tried downloading drivers and my device is not being recognised
I already installed the novo7 tool and did the instructions posted on the link given, still it didn't able to enter in the recovery mode, and all I got is a android logo lying down with a red triangle icon with a "!" inside it.
sirhca said:
I already installed the novo7 tool and did the instructions posted on the link given, still it didn't able to enter in the recovery mode, and all I got is a android logo lying down with a red triangle icon with a "!" inside it.
Click to expand...
Click to collapse
did u extract the recovery ?
A13 7" Capacitive Touch Screen Android 4.0 Tablet
icoolguy1995 said:
did u extract the recovery ?
Click to expand...
Click to collapse
you can also find the information here androidhkmarket.co.nr they are a new forum
editing build prop for allwinners q88 7in tab
hi I edit my allwinners Q88 tab to
ro.pr - model =GT-N7100
ro.pr-brand=samsung
Ro.pr-name=t03gxx
ro.po-manufactuer=samsung
ro.po-device=t03g
This is for the samsung galaxy note s 2 I used ro editer so I could play new gameloft games like modern combat 4 and gangstar rio city
Now that the games are fully downloaded on my Q88 that's showing the play store its the note s 2 how can I get the games to play more stabile
Should I overclock can anyone help
Thanks Mondayred9
mondayred9 said:
hi I edit my allwinners Q88 tab to
ro.pr - model =GT-N7100
ro.pr-brand=samsung
Ro.pr-name=t03gxx
ro.po-manufactuer=samsung
ro.po-device=t03g
This is for the samsung galaxy note s 2 I used ro editer so I could play new gameloft games like modern combat 4 and gangstar rio city
Now that the games are fully downloaded on my Q88 that's showing the play store its the note s 2 how can I get the games to play more stabile
Should I overclock can anyone help
Thanks Mondayred9
Click to expand...
Click to collapse
if the games are working fine than no need to overclock !
Someone Solve the BACK-BUTTON problem?
My tab have only Volume Keys and Power and in CWM i must reboot every time i wanna come back!
News for the TOUCH version?
buttons
ockicker13 said:
I actually can't get it to boot to CWM with the hardware buttons...not sure what's going on, but hopefully I won't get to the point where I need to do that.
Click to expand...
Click to collapse
on my a13 MID i pressed the physical home button and the down button. its a pain since the buttons are stiff and close together and i hace to hold it for quite a while -_-
-_-
pjvaliant said:
Someone Solve the BACK-BUTTON problem?
My tab have only Volume Keys and Power and in CWM i must reboot every time i wanna come back!
News for the TOUCH version?
Click to expand...
Click to collapse
i have to reboot to go back. my fingers like die after rebooting it twice thats cuz its like ported from cwm for another tablet
A13 qs701b
Hi, I have chinesse tablet A13
model number: gs701b
android version: 4.0.3
kernel version. 3.0.8
build number: eng.lvle.20121201.092314.wineluo
It will work this CWM for my table and this http://forum.xda-developers.com/showthread.php?p=33349032#post33349032
icoolguy1995 said:
did u extract the recovery ?
Click to expand...
Click to collapse
same problem here all i get is ! noww its gone n i cant power up yes i did extract HELP
Well i'm glad there is still some interest here. I had a lot of stuff going on and basically haven't used my tablet for a few months. Hopefully someone can (or already has) figure this out...
Sent from my A13-MID using xda app-developers app
Stuck on boot, cannot go into recovery anymore
I rooted and installed recovery for my A13-MID tablet by Lutema, http://forum.xda-developers.com/showthread.php?p=33349032#post33349032, i was stuck in recovery for a while, then i reset to factory settings since i couldn't get it to NOT boot into recovery, i did a factory reset to see if that would fix it, just made it worse, tablet is stuck on manufacturer's splash screen at the beggining, how can i reflash?? didnt make a backup. can anyone provide a rom or instructions on how to do it?
Well i got this tablet wanted to intall cynagon mod for that i need twrp i installed twrp transfered it to my tablet went into recovery and flashed twrp after it rebooted into TWRP the screen was all fuzzy then the menue came up i could'nt touch anything so i pressed the power buttom it said swipe to unlock but i couldnt touch anything so i held the power off button for 30sec it turn off i turn it back on and it was the exect same thing can someone help me please what do i do ? is it bricked?
viperasap said:
Well i got this tablet wanted to intall cynagon mod for that i need twrp i installed twrp transfered it to my tablet went into recovery and flashed twrp after it rebooted into TWRP the screen was all fuzzy then the menue came up i could'nt touch anything so i pressed the power buttom it said swipe to unlock but i couldnt touch anything so i held the power off button for 30sec it turn off i turn it back on and it was the exect same thing can someone help me please what do i do ? is it bricked?
Click to expand...
Click to collapse
Hi,
I was just wondering: Have you rooted your device and have you installed twrp for your specific device? (I know, sounds like a dumb question, but you'll be suprised how many people install wrong versions). Because if you have rooted your device properly, and you installed twrp (one for your device), then you should be just fine. But I'm afraid that you haven't, and that therefore the screen is all fuzzy. And also, is the screen fuzzy in the twrp menu, or when you are on (e.g) the homescreen? If the second option doesn't apply, then you are not bricked. Please answer and give as much information as possible on what you did, then I might be able to help you. (btw, it's very unlikely that you are hard-bricked and that your device won't be able to be repaired)
(and a happy new year )
pep18 said:
Hi,
I was just wondering: Have you rooted your device and have you installed twrp for your specific device? (I know, sounds like a dumb question, but you'll be suprised how many people install wrong versions). Because if you have rooted your device properly, and you installed twrp (one for your device), then you should be just fine. But I'm afraid that you haven't, and that therefore the screen is all fuzzy. And also, is the screen fuzzy in the twrp menu, or when you are on (e.g) the homescreen? If the second option doesn't apply, then you are not bricked. Please answer and give as much information as possible on what you did, then I might be able to help you. (btw, it's very unlikely that you are hard-bricked and that your device won't be able to be repaired)
(and a happy new year )
Click to expand...
Click to collapse
Yes i root my device before i installed twrp , when i boot my tablet twrp boots up the screens goes alll blurry / fuzzy with colors then it becomes normal recovery menue i installed twrp touch so i should be able to touch the setting but i can't i press the power button and a fuzze Unlock with ''Slide to unlock'' comes up but i can't slide to unlock it.. Oh yeah and it is upside down so i have to turn my tablet upside ..
I think[I know] i installed the wrong version of twrp which does not work for my device, Is there any way i could get rid of this recovery or factory reset?
What kind of tablet do you have? Does the bootloader support fastboot? If so you should be able to flash the proper recovery. If not does adb work when in recovery? You may be able to change it here. Also your OEM may have a download mode to flash firmware, this may be another option.
Sent from my Nexus 4 using XDA Premium 4 mobile app
I have a Allwinner A31 table to be precise ubonton u705a
I have tried adb but it just says [waiting for device] so I guess ADB does not work.
I don't know anything about bootloaders it had an option of fastbooting in the power menus if that means anything sorry for my lack of description Sent from my R800i using xda app-developers app
viperasap said:
Yes i root my device before i installed twrp , when i boot my tablet twrp boots up the screens goes alll blurry / fuzzy with colors then it becomes normal recovery menue i installed twrp touch so i should be able to touch the setting but i can't i press the power button and a fuzze Unlock with ''Slide to unlock'' comes up but i can't slide to unlock it.. Oh yeah and it is upside down so i have to turn my tablet upside ..
I think[I know] i installed the wrong version of twrp which does not work for my device, Is there any way i could get rid of this recovery or factory reset?
Click to expand...
Click to collapse
I think the easiest would be to just install the right version, the same way you installed this version. You are still able to connect your device to your pc, I guess, so you should be fine. To go back to your stock recovery, find the stock recovery for your device (you can probably find it somewhere here on the forums), and flash it.
Hope this works and good luck
pep18 said:
I think the easiest would be to just install the right version, the same way you installed this version. You are still able to connect your device to your pc, I guess, so you should be fine. To go back to your stock recovery, find the stock recovery for your device (you can probably find it somewhere here on the forums), and flash it.
Hope this works and good luck
Click to expand...
Click to collapse
Ok thank you for your help I figured it out thanks !! Happy new year 2014!
viperasap said:
Ok thank you for your help I figured it out thanks !! Happy new year 2014!
Click to expand...
Click to collapse
Glad I could help, you too!
Hi everyone,
I have an Alcatel One Touch Pop C5 (Alcatel 5036D). I made a backup in stock recovery before I installed the Xposed framework. After the installation i did a reboot but it stuck at the boot logo. Then i restored my backup but it didn't work, the screen just turned black, so after an hour i restarted my phone. Now I can't do anything, i can't even get in recovery (but it is a soft brick, i can still see the boot logo). I guess i will have to flash the ROM again but i'm a newbie (I installed some customs ROM's before but not on this phone), and no custom ROM's are available. Does anybody know what to do? I would really appreciate your help!
Here alcatel mobile upgrade software.it will give your your pop c5 zero
Xposed is not working on c5 pop because it has a rom odex
I'll try to deodex the stock ROM ...
lohanbarth said:
Here alcatel mobile upgrade software[/URL].it will give your your pop c5 zero
Xposed is not working on c5 pop because it has a rom odex
Click to expand...
Click to collapse
Thanks for your reply, but this didn't help! The program says installation was succesful but it still won't boot and I still can't get in recovery.
senna98 said:
Thanks for your reply, but this didn't help! The program says installation was succesful but it still won't boot and I still can't get in recovery.
Click to expand...
Click to collapse
You must wait a very long time after upgrade. This happened to me with xposed too. Just upgrade, follow instructionst and be patient.
DeNarco said:
You must wait a very long time after upgrade. This happened to me with xposed too. Just upgrade, follow instructionst and be patient.
Click to expand...
Click to collapse
Are you talking about the same model? Iohanbarth said it won't work because of the odex, so that's a bit strange. How long exactly did it take? I restarted my phone when the boot logo was there for about 10 minutes.
senna98 said:
Are you talking about the same model? Iohanbarth said it won't work because of the odex, so that's a bit strange. How long exactly did it take? I restarted my phone when the boot logo was there for about 10 minutes.
Click to expand...
Click to collapse
If we talking about Alcatel OT POP C5 then it is same model. I dont remember exactly how much i wait but it was around 30 mins and restarted few times. Then i go to stock recovery and wipe it and booted firs time normally. Im tolking about mobile upgrade tool not about exposed. I just mention that i soft bricked my phone with it too
DeNarco said:
If we talking about Alcatel OT POP C5 then it is same model. I dont remember exactly how much i wait but it was around 30 mins and restarted few times. Then i go to stock recovery and wipe it and booted firs time normally. Im tolking about mobile upgrade tool not about exposed. I just mention that i soft bricked my phone with it too
Click to expand...
Click to collapse
So you also got the black screen? If that is true then i just have to reset it, but still can't get into recovery!
senna98 said:
So you also got the black screen? If that is true then i just have to reset it, but still can't get into recovery!
Click to expand...
Click to collapse
Yes, black screen after mobile upgrade and noting happens for about 30 or more minutes. Then i restarted two or free times and after that i tried and i able to go to recovery. Try put out the battery and then recovery with volume+ and power
DeNarco said:
Yes, black screen after mobile upgrade and noting happens for about 30 or more minutes. Then i restarted two or free times and after that i tried and i able to go to recovery. Try put out the battery and then recovery with volume+ and power
Click to expand...
Click to collapse
Will try, but not much hope left... Is there anyway to hard reset the phone without booting, using recovery or adb? I guess not..
senna98 said:
Will try, but not much hope left... Is there anyway to hard reset the phone without booting, using recovery or adb? I guess not..
Click to expand...
Click to collapse
Dont lose hope, try again with mobile upgrade s 4.0.5, run as administrator, select one touch 5036 and do it again. Look out for your battery must have least 80 %. On Alcatel site it says: Q9 Why couldn’t I switch on the phone after using One Touch Upgrade?
It might take longer time than normal to switch on the phone after using One Touch Upgrade. Please long press the switch on key to check again.
If it still doesn’t work, please take off the battery, then insert it to check again.
If the problem persists, please try to upgrade your mobile phone’s software by One Touch Upgrade again.
wish You luck
DeNarco said:
Dont lose hope, try again with mobile upgrade s 4.0.5, run as administrator, select one touch 5036 and do it again. Look out for your battery must have least 80 %. On Alcatel site it says: Q9 Why couldn’t I switch on the phone after using One Touch Upgrade?
It might take longer time than normal to switch on the phone after using One Touch Upgrade. Please long press the switch on key to check again.
If it still doesn’t work, please take off the battery, then insert it to check again.
If the problem persists, please try to upgrade your mobile phone’s software by One Touch Upgrade again.
wish You luck
Click to expand...
Click to collapse
Dude i love you! I didn't give up because of you and kept trying. I finally got into recovery. You have to pull out the sd card, then boot with power button + volume up. The screen will be black as always, but if you do it again, the recovery is finally there. You can put the sd card back in and everything works, but it looks like my restore backup function in recovery is "broken". I will flash the custom recovery lohanbarth modified. Thank you very much, my problem is finally solved!!
danibosev said:
I'll try to deodex the stock ROM ...
Click to expand...
Click to collapse
That would be awesome! But doesn't it slow down a lot?
senna98 said:
Dude i love you! I didn't give up because of you and kept trying. I finally got into recovery. You have to pull out the sd card, then boot with power button + volume up. The screen will be black as always, but if you do it again, the recovery is finally there. You can put the sd card back in and everything works, but it looks like my restore backup function in recovery is "broken". I will flash the custom recovery lohanbarth modified. Thank you very much, my problem is finally solved!!
Click to expand...
Click to collapse
Glad to hear You succeeded
Help please !!!!!!
DeNarco said:
Glad to hear You succeeded
Click to expand...
Click to collapse
im a new with this... i was able to install ctr recovery, my phone is soft bricked (i installed gravity box jb ) rebooted and now my phone is soft bricked... so i can get into recovery mode... thats great but i dont know how to restore or get working again... i promise im not lazy, i ve read a lot here still need like tutorial on how to do it ... steps to follow thanks in advanced
hello
to you do a backup of your ROM with the CTR? If so, you removed the battery of your C5 and gives you the up volume + power 10 second and you will be in the recovery ctr.
if its not working downloaded mobile upgrade to restore your C5.
PS: XPOSED Framework does not work on POP C5
pop c5 bricked
lohanbarth said:
hello
to you do a backup of your ROM with the CTR? If so, you removed the battery of your C5 and gives you the up volume + power 10 second and you will be in the recovery ctr.
if its not working downloaded mobile upgrade to restore your C5.[/URL]
PS: XPOSED Framework does not work on POP C5
Click to expand...
Click to collapse
Thanks for replying (i dont have backups nor roms)
so...i can get into carliv CTR recovery .... i guess its different than ''stock recovery mode'' right??? so im doing the mobile upgrade workaround rightnow... will give it a try
my understanding is : once upgrade is done you wait around 40 min then try to restart phone and get into recovery mode? then wipe and boot (that should bring my c5 back to life right?)
when say wipe you mean like factory reset?
Now my question is ... When i do power button + volume up key it brings up carliv ctr recovery instead of stock recovery mode... would that make a difference for this work around???
u think i will be able to recover my c5?
thanks so much i hope it works... thanks in advanced , would like answers to my questions
Xposed Framework Version 2.3.1 with Gravity Box 3.0.2 works with Alcatel One Touch Pop C5
Be careful not to update them.
Download Links:
Xposed Framework 2.3.1.apk
Gravity Box - JellyBean - 3.0.2.apk
Alcatel 5036
There has been a software update for the POP C9 will xposed v 2.6.1 work with this?
Hey,
I tried flashing TWRP but used the wrong version. What to do now?
My device is stuck in a bootloop, Display off, being seen as a Serial device.
What about flashing Le Max 2 TWRP?
NMir01 said:
What about flashing Le Max 2 TWRP?
Click to expand...
Click to collapse
I wanted to do that, but how?
It just keeps rebooting the Loader I think, none of the Hardware Keys is doing anything.
Keep the power button pressed until the phone shuts down. Then enter into fastboot mode and flash another TWRP.
If it doesn't work, then wait until battery is dead, charge it while off and then go into fastboot and flash TWRP.
valy_cta said:
Keep the power button pressed until the phone shuts down. Then enter into fastboot mode and flash another TWRP.
If it doesn't work, then wait until battery is dead, charge it while off and then go into fastboot and flash TWRP.
Click to expand...
Click to collapse
What do I do if it doesn't stay shutdown but instead starts the loop again?
I don't think it will accept any Keys being presse3d while that loop runs.
werdck said:
What do I do if it doesn't stay shutdown but instead starts the loop again?
I don't think it will accept any Keys being presse3d while that loop runs.
Click to expand...
Click to collapse
please press power and vol - during the loop, it should enter "fastboot mode"
please confirm what happen?
AhmadSant said:
please press power and vol - during the loop, it should enter "fastboot mode"
please confirm what happen?
Click to expand...
Click to collapse
Nothing happens. If connected to power, there is no reaction other than the red LED glowing. I don't have a PC here right now though.
Heyyo, when you're holding power and volume down please don't release it until you see a logo of some motor gears and the words fast boot or boot loader.
Whoa wait a minute, are you sure you have an x3?
Physically On the back of your phone does it have numbers like x820 or x520 or something else?
Maybe the power off timer gets reset during reboot? Than you have to wait until the phone runs out of power in order to geht into fastboot mode.
ThE_MarD said:
Heyyo, when you're holding power and volume down please don't release it until you see a logo of some motor gears and the words fast boot or boot loader.
Click to expand...
Click to collapse
This doesn't work even after 10 Minutes.
ThE_MarD said:
Whoa wait a minute, are you sure you have an x3?
Click to expand...
Click to collapse
Very much sure, yes.
ThE_MarD said:
Physically On the back of your phone does it have numbers like x820 or x520 or something else?
Click to expand...
Click to collapse
The Sticker says LEX626
werdck said:
This doesn't work even after 10 Minutes.
Very much sure, yes.
The Sticker says LEX626
Click to expand...
Click to collapse
The LeEco Le S3 LEX626 eh? I'd recommend reading this thread
https://forum.xda-developers.com/le-2/help/bricked-le-s3-x626-flashing-twrp-power-t3715937/page5
I don't think there's any custom ROMs for the LeEco Le S3 LEX626... It has a MediaTek Helio system on a chip which unfortunately isn't nearly as popular as Qualcomm Snapdragon SoC for custom ROMs... My guess is the difficulty of dealing with MediaTek and their opposition to sharing kernel source code for custom ROMs...
The LeEco Le S3 LEX626 is not compatible to Le Max 2 LEX820 or Le 2 (S2 LEX520) as they aren't even the same system on a chip vendor... Your only hope is to download EUI ROM for the LEX626 and try and force flash it
https://www.needrom.com/category/leeco/le-3/
How old is your Le S3? If it's recent I'd actually recommend asking for a refund (once you get it working again that is) and buying the LeEco Le 2 (S2) LEX520 as it does have a healthy custom ROM community that is even working on Oreo
ThE_MarD said:
The LeEco Le S3 LEX626 eh? I'd recommend reading this thread
https://forum.xda-developers.com/le-2/help/bricked-le-s3-x626-flashing-twrp-power-t3715937/page5
I don't think there's any custom ROMs for the LeEco Le S3 LEX626... It has a MediaTek Helio system on a chip which unfortunately isn't nearly as popular as Qualcomm Snapdragon SoC for custom ROMs... My guess is the difficulty of dealing with MediaTek and their opposition to sharing kernel source code for custom ROMs...
The LeEco Le S3 LEX626 is not compatible to Le Max 2 LEX820 or Le 2 (S2 LEX520) as they aren't even the same system on a chip vendor... Your only hope is to download EUI ROM for the LEX626 and try and force flash it
https://www.needrom.com/category/leeco/le-3/
How old is your Le S3? If it's recent I'd actually recommend asking for a refund (once you get it working again that is) and buying the LeEco Le 2 (S2) LEX520 as it does have a healthy custom ROM community that is even working on Oreo
Click to expand...
Click to collapse
Actually the seller sent me the wrong device. I will buy a Le Max 2 definitely!
But my varanty is void, so I need to fix and send back fast...
werdck said:
Actually the seller sent me the wrong device. I will buy a Le Max 2 definitely!
But my varanty is void, so I need to fix and send back fast...
Click to expand...
Click to collapse
Ah ok, yeah that's an odd mistake they would have made and I wish you luck friend on resolving this. Please check those links I mentioned as they are probably your best bet to get your phone working again. Good luck!
Never mind...
Try this: https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
ThE_MarD said:
Ah ok, yeah that's an odd mistake they would have made and I wish you luck friend on resolving this. Please check those links I mentioned as they are probably your best bet to get your phone working again. Good luck!
Click to expand...
Click to collapse
The Phone is working, now i can't Make calls.
werdck said:
The Phone is working, now i can't Make calls.
Click to expand...
Click to collapse
Well that's definitely a good start! Glad to hear it works at least.
So for not making calls, you might be lucky enough to fix it by flashing a different version of EUI ROM meant for your Le S3.
Do you know what version of EUI ROM your device came with?
ThE_MarD said:
Well that's definitely a good start! Glad to hear it works at least.
So for not making calls, you might be lucky enough to fix it by flashing a different version of EUI ROM meant for your Le S3.
Do you know what version of EUI ROM your device came with?
Click to expand...
Click to collapse
Most probably modem should be flashed. Just my guess
valy_cta said:
Most probably modem should be flashed. Just my guess
Click to expand...
Click to collapse
Thanks!
But: How do I do that? Sorry for this complete noob question. I know how to flash stuff in general (writing directly to memory and via fastboot).
Use this qfil file
werdck said:
Hey,
I tried flashing TWRP but used the wrong version. What to do now?
My device is stuck in a bootloop, Display off, being seen as a Serial device.
Click to expand...
Click to collapse
https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
It'll definitely solve your problem tried snd tested ☺
Hello first of all my phone touch screen not working at all. It can't react to my touch. Even i had to reboot it by long pressing the power button. The phone still can reboot to recovery,fastboot mode. It's like you're touching the person in coma. No reaction.
What i do before it gets into this problem, i flash a kernel (not gonna tell n not blaming dev either). At first 10 minutes it was ok until i reboot again to recovery to flash magisk zip. After it went to recovery mode my phone didn't react to my touch.
What i do is i try to flash stock global rom. The phone boots but still in coma. Just a new dress for a coma person. Any ideas?
I'll post a pic later. A miui startup screen, fastboot and recovery screen.
StormTrooper89 said:
I'll post a pic later. A miui startup screen, fastboot and recovery screen.
Click to expand...
Click to collapse
Does touch work in twrp?
sotosgolf said:
Does touch work in twrp?
Click to expand...
Click to collapse
Not working too. I'm still convinced it's not a hardware problem. But right now I'm out of ideas.
have you tried reflashing miui through mi flashtool in fastboot mode?
If you can fast it to fastboot perhaps flash the original miui. Maybe you flash a 75hz kernel that some pocophone is not compatible I already did that but twrp is sure working for me though.
StormTrooper89 said:
Not working too. I'm still convinced it's not a hardware problem. But right now I'm out of ideas.
Click to expand...
Click to collapse
If you have kept a vendor image backup of after you unlocked the phone, flash it. Differently, your only option is flashing your original miui via fastboot (not an update).
StormTrooper89 said:
Hello first of all my phone touch screen not working at all. It can't react to my touch. Even i had to reboot it by long pressing the power button. The phone still can reboot to recovery,fastboot mode. It's like you're touching the person in coma. No reaction.
What i do before it gets into this problem, i flash a kernel (not gonna tell n not blaming dev either). At first 10 minutes it was ok until i reboot again to recovery to flash magisk zip. After it went to recovery mode my phone didn't react to my touch.
What i do is i try to flash stock global rom. The phone boots but still in coma. Just a new dress for a coma person. Any ideas?
Click to expand...
Click to collapse
Hi. Sorry for heating this.
I know it would make the dev look bad, but could you please mention which kernel you used? So the dev could try and look into it. If it was my kernel, that's strange, we literally never broke and phone. Now we saw a post about NGK breaking a touch, that's why I'm asking you to at least somehow hint at the kernel
D1stRU3T0R said:
Hi. Sorry for heating this.
I know it would make the dev look bad, but could you please mention which kernel you used? So the dev could try and look into it. If it was my kernel, that's strange, we literally never broke and phone. Now we saw a post about NGK breaking a touch, that's why I'm asking you to at least somehow hint at the kernel
Click to expand...
Click to collapse
I flashed Lawrun K. But don't worry I didn't blame him the dev for the cause of my phone.
I already flash stock miui using miui flash tool. Even flash the outdated version in hope that it will back to normal but it's not.
What bad is that in any screen, either home, stock recovery nor twrp the touchscreen won't work. The rest work perfectly. It can boot, can flash via adb, flash tool whatsoever.
Right now i cant replace my screen yet due to covid19 restrictions order to stay at home and all shops closed. If any of you guys have idea please do share. For the dev of Lawrun Kernel, it's not your fault. I already understand the risk of flashing all this tweaks.
I know it may sound odd but have you tried plugging in a mouse from a computer and see if you can get a curser to click on the on screen buttons.....
stinka318 said:
I know it may sound odd but have you tried plugging in a mouse from a computer and see if you can get a curser to click on the on screen buttons.....
Click to expand...
Click to collapse
Lol i already did that too. I figured it before when i use my oppo find 7 with screen crack and that was a long time ago. But no cursor appeared.
StormTrooper89 said:
Lol i already did that too. I figured it before when i use my oppo find 7 with screen crack and that was a long time ago. But no cursor appeared.
Click to expand...
Click to collapse
It is ashame that there not some sort of way to modify Samsung's remote system that you plug it in to your laptop and can control it without the use of the touch screen.......