[Q] Alcatel One Touch Pop C5 soft brick - Android Q&A, Help & Troubleshooting

Hi everyone,
I have an Alcatel One Touch Pop C5 (Alcatel 5036D). I made a backup in stock recovery before I installed the Xposed framework. After the installation i did a reboot but it stuck at the boot logo. Then i restored my backup but it didn't work, the screen just turned black, so after an hour i restarted my phone. Now I can't do anything, i can't even get in recovery (but it is a soft brick, i can still see the boot logo). I guess i will have to flash the ROM again but i'm a newbie (I installed some customs ROM's before but not on this phone), and no custom ROM's are available. Does anybody know what to do? I would really appreciate your help!

Here alcatel mobile upgrade software.it will give your your pop c5 zero
Xposed is not working on c5 pop because it has a rom odex

I'll try to deodex the stock ROM ...

lohanbarth said:
Here alcatel mobile upgrade software[/URL].it will give your your pop c5 zero
Xposed is not working on c5 pop because it has a rom odex
Click to expand...
Click to collapse
Thanks for your reply, but this didn't help! The program says installation was succesful but it still won't boot and I still can't get in recovery.

senna98 said:
Thanks for your reply, but this didn't help! The program says installation was succesful but it still won't boot and I still can't get in recovery.
Click to expand...
Click to collapse
You must wait a very long time after upgrade. This happened to me with xposed too. Just upgrade, follow instructionst and be patient.

DeNarco said:
You must wait a very long time after upgrade. This happened to me with xposed too. Just upgrade, follow instructionst and be patient.
Click to expand...
Click to collapse
Are you talking about the same model? Iohanbarth said it won't work because of the odex, so that's a bit strange. How long exactly did it take? I restarted my phone when the boot logo was there for about 10 minutes.

senna98 said:
Are you talking about the same model? Iohanbarth said it won't work because of the odex, so that's a bit strange. How long exactly did it take? I restarted my phone when the boot logo was there for about 10 minutes.
Click to expand...
Click to collapse
If we talking about Alcatel OT POP C5 then it is same model. I dont remember exactly how much i wait but it was around 30 mins and restarted few times. Then i go to stock recovery and wipe it and booted firs time normally. Im tolking about mobile upgrade tool not about exposed. I just mention that i soft bricked my phone with it too

DeNarco said:
If we talking about Alcatel OT POP C5 then it is same model. I dont remember exactly how much i wait but it was around 30 mins and restarted few times. Then i go to stock recovery and wipe it and booted firs time normally. Im tolking about mobile upgrade tool not about exposed. I just mention that i soft bricked my phone with it too
Click to expand...
Click to collapse
So you also got the black screen? If that is true then i just have to reset it, but still can't get into recovery!

senna98 said:
So you also got the black screen? If that is true then i just have to reset it, but still can't get into recovery!
Click to expand...
Click to collapse
Yes, black screen after mobile upgrade and noting happens for about 30 or more minutes. Then i restarted two or free times and after that i tried and i able to go to recovery. Try put out the battery and then recovery with volume+ and power

DeNarco said:
Yes, black screen after mobile upgrade and noting happens for about 30 or more minutes. Then i restarted two or free times and after that i tried and i able to go to recovery. Try put out the battery and then recovery with volume+ and power
Click to expand...
Click to collapse
Will try, but not much hope left... Is there anyway to hard reset the phone without booting, using recovery or adb? I guess not..

senna98 said:
Will try, but not much hope left... Is there anyway to hard reset the phone without booting, using recovery or adb? I guess not..
Click to expand...
Click to collapse
Dont lose hope, try again with mobile upgrade s 4.0.5, run as administrator, select one touch 5036 and do it again. Look out for your battery must have least 80 %. On Alcatel site it says: Q9 Why couldn’t I switch on the phone after using One Touch Upgrade?
It might take longer time than normal to switch on the phone after using One Touch Upgrade. Please long press the switch on key to check again.
If it still doesn’t work, please take off the battery, then insert it to check again.
If the problem persists, please try to upgrade your mobile phone’s software by One Touch Upgrade again.
wish You luck

DeNarco said:
Dont lose hope, try again with mobile upgrade s 4.0.5, run as administrator, select one touch 5036 and do it again. Look out for your battery must have least 80 %. On Alcatel site it says: Q9 Why couldn’t I switch on the phone after using One Touch Upgrade?
It might take longer time than normal to switch on the phone after using One Touch Upgrade. Please long press the switch on key to check again.
If it still doesn’t work, please take off the battery, then insert it to check again.
If the problem persists, please try to upgrade your mobile phone’s software by One Touch Upgrade again.
wish You luck
Click to expand...
Click to collapse
Dude i love you! I didn't give up because of you and kept trying. I finally got into recovery. You have to pull out the sd card, then boot with power button + volume up. The screen will be black as always, but if you do it again, the recovery is finally there. You can put the sd card back in and everything works, but it looks like my restore backup function in recovery is "broken". I will flash the custom recovery lohanbarth modified. Thank you very much, my problem is finally solved!!

danibosev said:
I'll try to deodex the stock ROM ...
Click to expand...
Click to collapse
That would be awesome! But doesn't it slow down a lot?

senna98 said:
Dude i love you! I didn't give up because of you and kept trying. I finally got into recovery. You have to pull out the sd card, then boot with power button + volume up. The screen will be black as always, but if you do it again, the recovery is finally there. You can put the sd card back in and everything works, but it looks like my restore backup function in recovery is "broken". I will flash the custom recovery lohanbarth modified. Thank you very much, my problem is finally solved!!
Click to expand...
Click to collapse
Glad to hear You succeeded

Help please !!!!!!
DeNarco said:
Glad to hear You succeeded
Click to expand...
Click to collapse
im a new with this... i was able to install ctr recovery, my phone is soft bricked (i installed gravity box jb ) rebooted and now my phone is soft bricked... so i can get into recovery mode... thats great but i dont know how to restore or get working again... i promise im not lazy, i ve read a lot here still need like tutorial on how to do it ... steps to follow thanks in advanced

hello
to you do a backup of your ROM with the CTR? If so, you removed the battery of your C5 and gives you the up volume + power 10 second and you will be in the recovery ctr.
if its not working downloaded mobile upgrade to restore your C5.
PS: XPOSED Framework does not work on POP C5

pop c5 bricked
lohanbarth said:
hello
to you do a backup of your ROM with the CTR? If so, you removed the battery of your C5 and gives you the up volume + power 10 second and you will be in the recovery ctr.
if its not working downloaded mobile upgrade to restore your C5.[/URL]
PS: XPOSED Framework does not work on POP C5
Click to expand...
Click to collapse
Thanks for replying (i dont have backups nor roms)
so...i can get into carliv CTR recovery .... i guess its different than ''stock recovery mode'' right??? so im doing the mobile upgrade workaround rightnow... will give it a try
my understanding is : once upgrade is done you wait around 40 min then try to restart phone and get into recovery mode? then wipe and boot (that should bring my c5 back to life right?)
when say wipe you mean like factory reset?
Now my question is ... When i do power button + volume up key it brings up carliv ctr recovery instead of stock recovery mode... would that make a difference for this work around???
u think i will be able to recover my c5?
thanks so much i hope it works... thanks in advanced , would like answers to my questions

Xposed Framework Version 2.3.1 with Gravity Box 3.0.2 works with Alcatel One Touch Pop C5
Be careful not to update them.
Download Links:
Xposed Framework 2.3.1.apk
Gravity Box - JellyBean - 3.0.2.apk

Alcatel 5036

There has been a software update for the POP C9 will xposed v 2.6.1 work with this?

Related

Optimus T stuck on LG rebbot screen

so im new to this whole rom thing and i tried installing megatron rom form sdcard with rom manger and when i started it the phone reset and got stuck on LG screen. I tried hard reset and removing the battery. Not working. Do i have a bricked phone now, please say no. HELP ME please
deathmill3001 said:
so im new to this whole rom thing and i tried installing megatron rom form sdcard with rom manger and when i started it the phone reset and got stuck on LG screen. I tried hard reset and removing the battery. Not working. Do i have a bricked phone now, please say no. HELP ME please
Click to expand...
Click to collapse
I'm hoping that you made a backup before you flashed the rom. If you did you should be able to boot into recovery and restore.
lol i think thats what i did. I backup everything using Titanium and rom manger on my sdcard. i just dont know how boot into recovery and restore. thanks for the reply
yep bricked...
All you can do now i's try to flash stock rom with kdz..
and how do u do that lol
deathmill3001 said:
and how do u do that lol
Click to expand...
Click to collapse
Here's the stock rom: csmg.lgmobile.com:9002/swdata/WEBSW/LGP509BK/ATMOBK/V10l_00/V10L_00.kdz
and you'll need KDZ(run it in compatibility mode if using win7 64bit):
http://www.megaupload.com/?d=B99JDF9I
boot phone into emergency mode: Home+Volume Up+Power
connect to PC via USB and flash with KDZ in 3qct +Emergency mode
i cant put my phone in emergency mode
deathmill3001 said:
i cant put my phone in emergency mode
Click to expand...
Click to collapse
my mistake. it is actually Back Button+Up Volume+Power
still nothing :[
Use it as a vibrator from now on, if u can. Haha j/k.
Go for warranty and see what happens..
lol hmmm i wonder what males can do with that.....
i was thinking about doing that and see if i could pull a fast one on radioshack
You did a nand backup before flashing Megatron, right? If so, you should boot in recovery using Home + Vol Down + Power and restore it from there. If not, you have no alternative but flashing the rom again (or any other rom). Be sure to wipe everything from recovery before that.
If that fails, you should get the official rom for your location and flash it with kdz (there is a very well done guide here on XDA for doing that, search for it).
And consider flashing Void next time, is more stable and has the same features (and more) as Megatron (hwacc, jit, oc, stagefright etc).
In any case, if the phone boots, even if gets stuck on LG splash screen, it is not bricked. It can be re-flashed easily, just follow the steps in the guides.
How to flash original rom: http://forum.xda-developers.com/showthread.php?t=875881
Original rom list: http://forum.xda-developers.com/showthread.php?t=865479&highlight=stock+rom
thank you so much for the reply but for some strange reason i cant put my phone into recovery or emergency mode. idk why and i tried like all the button presses. Do you hold them down or press them in order. im sry for being a noob lol. but u gave me hope knowing now its not bricked
deathmill3001 said:
thank you so much for the reply but for some strange reason i cant put my phone into recovery or emergency mode. idk why and i tried like all the button presses. Do you hold them down or press them in order. im sry for being a noob lol. but u gave me hope knowing now its not bricked
Click to expand...
Click to collapse
press and hold down HOME + VOL DOWN while the phone is off, then turn it on, keeping that 2 buttons pressed until recovery appears.
But if you have used rom manager, this won't work. Your only chance to unbrick is this: http://forum.xda-developers.com/showthread.php?t=883314
rom manager don't support yet optimus t
The same happened to me when I flashed LOL rom. I was reading that it can sometimes take up to 5 minutes to reach the boot animation. My phone reached the boot animation in 6-7 minutes. How long did you wait before you removed the battery?
thats not working either. all i saw was a bunch of ppl with the same problem and eventually sent it to LG service
ummm like about 3 minutes cause i was freaking out lol. that could be it :/
deathmill3001 said:
ummm like about 3 minutes cause i was freaking out lol. that could be it :/
Click to expand...
Click to collapse
I was about to pull mine out too after 3-4 minutes. I was freaking out also but had to go to the washroom when this happened. When I came back, the phone booted. If I didn't use the washroom, I would have bricked my phone, lol.
A lot of people have this problem because on the Optimus One it takes forever to load the first time. My samsung vibrant was extremely quick, 1 minute max
as soon as u send to warranty, the faster u get ur usable phone back
or just use it as vibrator
shadow_cruiser said:
I was about to pull mine out too after 3-4 minutes. I was freaking out also but had to go to the washroom when this happened. When I came back, the phone booted. If I didn't use the washroom, I would have bricked my phone, lol.
A lot of people have this problem because on the Optimus One it takes forever to load the first time. My samsung vibrant was extremely quick, 1 minute max
Click to expand...
Click to collapse
lol lucky u. idk this was my first android phone and i still have 1 year and 8 months left on my contract so i have no clue on what to do :/

[Q] [Help]I think TWRP bricked my android tablet

Well i got this tablet wanted to intall cynagon mod for that i need twrp i installed twrp transfered it to my tablet went into recovery and flashed twrp after it rebooted into TWRP the screen was all fuzzy then the menue came up i could'nt touch anything so i pressed the power buttom it said swipe to unlock but i couldnt touch anything so i held the power off button for 30sec it turn off i turn it back on and it was the exect same thing can someone help me please what do i do ? is it bricked?
viperasap said:
Well i got this tablet wanted to intall cynagon mod for that i need twrp i installed twrp transfered it to my tablet went into recovery and flashed twrp after it rebooted into TWRP the screen was all fuzzy then the menue came up i could'nt touch anything so i pressed the power buttom it said swipe to unlock but i couldnt touch anything so i held the power off button for 30sec it turn off i turn it back on and it was the exect same thing can someone help me please what do i do ? is it bricked?
Click to expand...
Click to collapse
Hi,
I was just wondering: Have you rooted your device and have you installed twrp for your specific device? (I know, sounds like a dumb question, but you'll be suprised how many people install wrong versions). Because if you have rooted your device properly, and you installed twrp (one for your device), then you should be just fine. But I'm afraid that you haven't, and that therefore the screen is all fuzzy. And also, is the screen fuzzy in the twrp menu, or when you are on (e.g) the homescreen? If the second option doesn't apply, then you are not bricked. Please answer and give as much information as possible on what you did, then I might be able to help you. (btw, it's very unlikely that you are hard-bricked and that your device won't be able to be repaired)
(and a happy new year )
pep18 said:
Hi,
I was just wondering: Have you rooted your device and have you installed twrp for your specific device? (I know, sounds like a dumb question, but you'll be suprised how many people install wrong versions). Because if you have rooted your device properly, and you installed twrp (one for your device), then you should be just fine. But I'm afraid that you haven't, and that therefore the screen is all fuzzy. And also, is the screen fuzzy in the twrp menu, or when you are on (e.g) the homescreen? If the second option doesn't apply, then you are not bricked. Please answer and give as much information as possible on what you did, then I might be able to help you. (btw, it's very unlikely that you are hard-bricked and that your device won't be able to be repaired)
(and a happy new year )
Click to expand...
Click to collapse
Yes i root my device before i installed twrp , when i boot my tablet twrp boots up the screens goes alll blurry / fuzzy with colors then it becomes normal recovery menue i installed twrp touch so i should be able to touch the setting but i can't i press the power button and a fuzze Unlock with ''Slide to unlock'' comes up but i can't slide to unlock it.. Oh yeah and it is upside down so i have to turn my tablet upside ..
I think[I know] i installed the wrong version of twrp which does not work for my device, Is there any way i could get rid of this recovery or factory reset?
What kind of tablet do you have? Does the bootloader support fastboot? If so you should be able to flash the proper recovery. If not does adb work when in recovery? You may be able to change it here. Also your OEM may have a download mode to flash firmware, this may be another option.
Sent from my Nexus 4 using XDA Premium 4 mobile app
I have a Allwinner A31 table to be precise ubonton u705a
I have tried adb but it just says [waiting for device] so I guess ADB does not work.
I don't know anything about bootloaders it had an option of fastbooting in the power menus if that means anything sorry for my lack of description Sent from my R800i using xda app-developers app
viperasap said:
Yes i root my device before i installed twrp , when i boot my tablet twrp boots up the screens goes alll blurry / fuzzy with colors then it becomes normal recovery menue i installed twrp touch so i should be able to touch the setting but i can't i press the power button and a fuzze Unlock with ''Slide to unlock'' comes up but i can't slide to unlock it.. Oh yeah and it is upside down so i have to turn my tablet upside ..
I think[I know] i installed the wrong version of twrp which does not work for my device, Is there any way i could get rid of this recovery or factory reset?
Click to expand...
Click to collapse
I think the easiest would be to just install the right version, the same way you installed this version. You are still able to connect your device to your pc, I guess, so you should be fine. To go back to your stock recovery, find the stock recovery for your device (you can probably find it somewhere here on the forums), and flash it.
Hope this works and good luck
pep18 said:
I think the easiest would be to just install the right version, the same way you installed this version. You are still able to connect your device to your pc, I guess, so you should be fine. To go back to your stock recovery, find the stock recovery for your device (you can probably find it somewhere here on the forums), and flash it.
Hope this works and good luck
Click to expand...
Click to collapse
Ok thank you for your help I figured it out thanks !! Happy new year 2014!
viperasap said:
Ok thank you for your help I figured it out thanks !! Happy new year 2014!
Click to expand...
Click to collapse
Glad I could help, you too!

[Q] [X10] Green led blinks, but not turning on.

Hello there,
I am having a problem with my Xperia X10a.
Was using ferraKernal v25 with ferrarom. Everything was working fine until yesterday.
PROBLEM: When i try to power my phone on, it vibrates for a short time with a single blink of green but the phone wont turn on.
SOLUTION TRIED:
1. Battery ok.
2. Flashtool 0.2.9 gb ready (flashing aborted)
3. Flashtool 0.9.18 (gets stuck at Processing of loader_unlocked.sin finished.)
4. pc companion (This device has no updates)
Below is the screenshot from flashtool.
Is there anyway to solve this problem. ?
Thank you.
Come on guys 23 views without reply..
Seriously no one of the respected xda have the ans !!!!!
really ????
born_high said:
Come on guys 23 views without reply..
Seriously no one of the respected xda have the ans !!!!!
really ????
Click to expand...
Click to collapse
Have you tried, or are you able to get into recovery? If so , maybe you can do a backup ( if there's anything to backup ) and then reflash the rom. Or if you already have a backup, do a restore.
ph0n3n3rd said:
Have you tried, or are you able to get into recovery? If so , maybe you can do a backup ( if there's anything to backup ) and then reflash the rom. Or if you already have a backup, do a restore.
Click to expand...
Click to collapse
i am unable to turn the phone on completely, how can i get into recovery then..Its a green led vibration and full black screen..
tried flashing stock and custom rom also..ended in those two results with flashtool, mentioned above
Anything else ???
and thank you for replying..at least someone did reply
born_high said:
i am unable to turn the phone on completely, how can i get into recovery then..Its a green led vibration and full black screen..
tried flashing stock and custom rom also..ended in those two results with flashtool, mentioned above
Anything else ???
and thank you for replying..at least someone did reply
Click to expand...
Click to collapse
To get into recovery you need to press the power button , then continually press the back button, ( don't hold it but keep pressing on off on off for about 30 seconds ). Only with the phone and battery, no USB cable! If you don't have any success with recovery you may need to flash a stock firmware.
Did you root the phone or purchase it already rooted? Do you know what firmware was on the phone before it was rooted?
This might help [REF][INDEX][Guide][How/Where-To] ALL-IN-ONE Consolidated X10 INFO | ROMs/THEMEs List 1 2 3 
ph0n3n3rd said:
To get into recovery you need to press the power button , then continually press the back button, ( don't hold it but keep pressing on off on off for about 30 seconds ). Only with the phone and battery, no USB cable! If you don't have any success with recovery you may need to flash a stock firmware.
Did you root the phone or purchase it already rooted? Do you know what firmware was on the phone before it was rooted?
This might help [REF][INDEX][Guide][How/Where-To] ALL-IN-ONE Consolidated X10 INFO | ROMs/THEMEs List 1 2 3 
Click to expand...
Click to collapse
Well..as i opened the thread with some statements above mate..
I was already using a Feravolt rom and kernel..And i rooted it and then flashed.
And obviously i know what/how to get into recovery.
But the thing is its not working without any good reason...
Situation like this happened to me before..
i was able to sues it then with stock..
But nothing seems to work now.
I guess i am not worth the seniors attention in here.
I shouldnt have opened the thread at the first place
but Hey, thanks for at least trying to help
Can you do a small test for me? I would like you to put the entire phone into a freezer ( not fridge ) for ten minutes, then take it out and see if it will power up. Will not harm the phone, I do it with an HD2.
ph0n3n3rd said:
Can you do a small test for me? I would like you to put the entire phone into a freezer ( not fridge ) for ten minutes, then take it out and see if it will power up. Will not harm the phone, I do it with an HD2.
Click to expand...
Click to collapse
Hahaha are you for serious XD. !!!
I recall someone(senior member) from xda once posted somewhere that, one thing putting the phone into freezer can do is just damage your phone
still i will give it a shot..its dead anyway..
will let you know
ph0n3n3rd said:
Can you do a small test for me? I would like you to put the entire phone into a freezer ( not fridge ) for ten minutes, then take it out and see if it will power up. Will not harm the phone, I do it with an HD2.
Click to expand...
Click to collapse
okay i did what you said without a solve to the problem..thought to let you know
Cheers to another dead Xperia x10.
As the developers are ignorant of the problem.
use this!
it will work.
http://forum.xda-developers.com/showthread.php?t=1504809
i have registered just for you
omi17 said:
See here>>>http://pune.quikr.com/Hard-Brick-Phone-Repair-Through-Riff-Z3X-Box-Aka-Jtag-Services-In-India-W0QQAdIdZ200482728
Click to expand...
Click to collapse
are you freaking trolling me
get lost with ads :/

0.15 BTC reward for unbrick my Z2!

Hey guys!
First of all i do not know if offering a donation for people helping out someone is again the rules here on xda, if so please tell me.
I will make a short intro and tell you that i yesterday received a Z2 from a friend that had upgraded himself with a newer phone so i got this one for free as a gift. (Had an Galaxy SII before)
And guess what, first thing i do is bricking it, genius..
When i got the phone i decided to "what the heck i want to root it" (because i rooted my SII without any problems) Anyhow i looked online and came across this guide made by arul20be, here on xda: http://forum.xda-developers.com/xpe...ck-d6502-03-23-4-0-546-completeguide-t3171219
So i fallowed the guide downloaded everything except that i could not use adb-setup-1.4.2 nor could i use adb-setup-1.4.3. The installation did not extract any files, so i found version 1.3 of ADB and it worked. The rest went flawlessly until i came to the last step, where i booted in to recovery with Dual recovery and installed flashable_D6503_23.4.A.0.546.zip. After that i did as instructed, cleaned cache/dalvik. After that i tried to exit the recovery and choose i think it was "power off system", you guys that are familiar with Dual recovery probably understand where i pressed. After that my phone shut down and after a while either it started up or i started it(don't remember) and it shows the SONY logo, nothing more happened. It didn't not shut down or do anything so i let it be for like an hour or so and then decided to hard shutdown it by pressing power and volume up key. i tried to start it up after a while again to see if maybe something happens, nothing happend and i let the phone be on during the night to see if anything could happen.
So today when the the story was the same i looked online to try to solve the problem, i tried to enter recovery mode by pressing on and then pressing volume up and down but nothing. Did
try to hard factory rest by pressing the red button for a couple of seconds, but nothing. it vibrates three times and then the sony logo comes up again. (is it called bootloop?)
The status now is that the phone, if plugged in to a power source like PC, or wall it will show the SONY logo even if you shut it down with power off and volume up. in other words the phone restarts itself. The only way to shut it down is to do it without a power source.
The fallowing tools+files has been used:
adb-setup-1.3.exe
flashtool-0.9.19.8-windows.exe
rootkitXperia_20140719.zip
Z2-lockeddualrecovery2.7.154-BETA.installer.zip
D6503_17.1.2.A.0.314_UK Generic.ftf
flashable_D6503_23.4.A.0.546.zip
So the thing is that i really want to upgrade myself with a new phone. In the same time i got like under one bitcoin that i had for a while and because of my stupidness i feel like i can donate to that to the first person who engages him/herself to that level so i can use my phone again.
Sorry for the long post! Thanks in advance!
axeljooo said:
Hey guys!
First of all i do not know if offering a donation for people helping out someone is again the rules here on xda, if so please tell me.
I will make a short intro and tell you that i yesterday received a Z2 from a friend that had upgraded himself with a newer phone so i got this one for free as a gift. (Had an Galaxy SII before)
And guess what, first thing i do is bricking it, genius..
When i got the phone i decided to "what the heck i want to root it" (because i rooted my SII without any problems) Anyhow i looked online and came across this guide made by arul20be, here on xda: http://forum.xda-developers.com/xpe...ck-d6502-03-23-4-0-546-completeguide-t3171219
So i fallowed the guide downloaded everything except that i could not use adb-setup-1.4.2 nor could i use adb-setup-1.4.3. The installation did not extract any files, so i found version 1.3 of ADB and it worked. The rest went flawlessly until i came to the last step, where i booted in to recovery with Dual recovery and installed flashable_D6503_23.4.A.0.546.zip. After that i did as instructed, cleaned cache/dalvik. After that i tried to exit the recovery and choose i think it was "power off system", you guys that are familiar with Dual recovery probably understand where i pressed. After that my phone shut down and after a while either it started up or i started it(don't remember) and it shows the SONY logo, nothing more happened. It didn't not shut down or do anything so i let it be for like an hour or so and then decided to hard shutdown it by pressing power and volume up key. i tried to start it up after a while again to see if maybe something happens, nothing happend and i let the phone be on during the night to see if anything could happen.
So today when the the story was the same i looked online to try to solve the problem, i tried to enter recovery mode by pressing on and then pressing volume up and down but nothing. Did
try to hard factory rest by pressing the red button for a couple of seconds, but nothing. it vibrates three times and then the sony logo comes up again. (is it called bootloop?)
The status now is that the phone, if plugged in to a power source like PC, or wall it will show the SONY logo even if you shut it down with power off and volume up. in other words the phone restarts itself. The only way to shut it down is to do it without a power source.
The fallowing tools+files has been used:
adb-setup-1.3.exe
flashtool-0.9.19.8-windows.exe
rootkitXperia_20140719.zip
Z2-lockeddualrecovery2.7.154-BETA.installer.zip
D6503_17.1.2.A.0.314_UK Generic.ftf
flashable_D6503_23.4.A.0.546.zip
So the thing is that i really want to upgrade myself with a new phone. In the same time i got like under one bitcoin that i had for a while and because of my stupidness i feel like i can donate to that to the first person who engages him/herself to that level so i can use my phone again.
Sorry for the long post! Thanks in advance!
Click to expand...
Click to collapse
Dude.. I suggest keep this phone as a showpiece.. And buy a new phone.. Z5 or Z3 with the latter being cheap... Or shell some bucks and give it to Sony service..
But i do hope your phone gets alright again..
[emoji5] [emoji5]
Sent from my D6502 using Tapatalk
EthanDev said:
Dude.. I suggest keep this phone as a showpiece.. And buy a new phone.. Z5 or Z3 with the latter being cheap... Or shell some bucks and give it to Sony service..
But i do hope your phone gets alright again..
[emoji5] [emoji5]
Sent from my D6502 using Tapatalk
Click to expand...
Click to collapse
well that was not much for help..
axeljooo said:
well that was not much for help..
Click to expand...
Click to collapse
Agree man.. But thats all you can expect from a noob [emoji13]
Sent from my D6502 using Tapatalk
Try with flashtool 0.9.18.6. On 0.9.19.x I had some problems with booting (one time stucks at sony logo, one time bootloop, one time freezes all the time, on tme flathtool crashed...)
Download Flashtool 0.9.18.6 and download and flash 23.4.A.0.546 ROM from here: https://mega.nz/#!n1YlBAhI!HX8WPPyjLDJGnUZ-9_Xom96OFZcDUfasgzjuagrj2UE (this is compiled by me FTF File, I'm using it when sth goes wrong) and then, when it boots (must boot because it's not hardbrick), charge it to 100%, download 23.1.A.1.28 5.0.2 ROM from here https://docs.google.com/uc?id=0By-vo9NJkgzJVUo0dVNreFNvSjg&export=download
And flash this ROM and reboot and DO NOT UPDATE. Install KingRoot (the newest is the best) and root it, then install XZ Dual Recovery and that's all.
Hope I helped, if not, write me in comment what went wrong, and, if any errors in flashtool are shown, copy and paste to comment and let mi see them.
Bruce666 said:
Try with flashtool 0.9.18.6. On 0.9.19.x I had some problems with booting (one time stucks at sony logo, one time bootloop, one time freezes all the time, on tme flathtool crashed...)
Download Flashtool 0.9.18.6 and download and flash 23.4.A.0.546 ROM from here: https://mega.nz/#!n1YlBAhI!HX8WPPyjLDJGnUZ-9_Xom96OFZcDUfasgzjuagrj2UE (this is compiled by me FTF File, I'm using it when sth goes wrong) and then, when it boots (must boot because it's not hardbrick), charge it to 100%, download 23.1.A.1.28 5.0.2 ROM from here https://docs.google.com/uc?id=0By-vo9NJkgzJVUo0dVNreFNvSjg&export=download
And flash this ROM and reboot and DO NOT UPDATE. Install KingRoot (the newest is the best) and root it, then install XZ Dual Recovery and that's all.
Hope I helped, if not, write me in comment what went wrong, and, if any errors in flashtool are shown, copy and paste to comment and let mi see them.
Click to expand...
Click to collapse
Thank you for the reply! i can not see how much my phone is charged and when i charge it the SONY logo shows up, so i do not know how much that drains the battery. But i will wait an hour or so then. Will try method after that! Though my phone was gone, but what i have now read myself to is that Hard brick is first when the phone is totally dead.
Before you answered i was going to do this guide:
http://forum.xda-developers.com/showpost.php?p=53220435&postcount=4
But i will go with your instead first. Should i uninstall my current flashtool and download Flashtool-0.9.18.6-windows.exe instead for now then while i wait for my phone to charge?
found this the file here https://drive.google.com/file/d/0B4sYgaP5RMK0S1pzUnMzdWd3UnM/view
Edit: did not read your post properly, will start with your custom ROM soon!
axeljooo said:
Thank you for the reply! i can not see how much my phone is charged and when i charge it the SONY logo shows up, so i do not know how much that drains the battery. But i will wait an hour or so then. Will try method after that! Though my phone was gone, but what i have now read myself to is that Hard brick is first when the phone is totally dead.
Before you answered i was going to do this guide:
http://forum.xda-developers.com/showpost.php?p=53220435&postcount=4
But i will go with your instead first. Should i uninstall my current flashtool and download Flashtool-0.9.18.6-windows.exe instead for now then while i wait for my phone to charge?
found this the file here https://drive.google.com/file/d/0B4sYgaP5RMK0S1pzUnMzdWd3UnM/view
Edit: did not read your post properly, will start with your custom ROM soon!
Click to expand...
Click to collapse
Yes, uninstall your flashtool and install 0.9.18.6
Bruce666 said:
Yes, uninstall your flashtool and install 0.9.18.6
Click to expand...
Click to collapse
of course, stupid of me
A question: was the rom 23.4.A.0.546 ROM really right for Z2? because Flashtool says hold "Back button" and plug in the phone. Z2 does not have a back button, but maybe you could house volume down?
Bruce666 said:
Yes, uninstall your flashtool and install 0.9.18.6
Click to expand...
Click to collapse
Done the first part with your custom ROM. Seems like you are getting the 0.15 BTC! will take it to next steep in an hour!
Thx!
Sorry I forgot. It requires flashmode You can reach it by pushing vol-
Bruce666 said:
Sorry I forgot. It requires flashmode You can reach it by pushing vol-
Click to expand...
Click to collapse
Did install your custom ROM without any problem!
i have charged my phone for 4h, but still only 54% charged.. so will get back here tomorrow!
axeljooo said:
Did install your custom ROM without any problem!
i have charged my phone for 4h, but still only 54% charged.. so will get back here tomorrow!
Click to expand...
Click to collapse
You can only use custom roms with an unlocked boot loader. Locked boot loader requires a sony kernel.
**edit**
Read the instructions he gave you, it's a modified stock rom so that should be fine. I've bricked mine and the flashtool has resolved it so hopefully it will for you
Um... Considering the fact that your phone boots up, I strongly recommend you to try a fresh install with pc companion.... I had somewhat a similar issue and it was the last resort for me and it worked...
Bruce666 said:
Try with flashtool 0.9.18.6. On 0.9.19.x I had some problems with booting (one time stucks at sony logo, one time bootloop, one time freezes all the time, on tme flathtool crashed...)
Download Flashtool 0.9.18.6 and download and flash 23.4.A.0.546 ROM from here: https://mega.nz/#!n1YlBAhI!HX8WPPyjLDJGnUZ-9_Xom96OFZcDUfasgzjuagrj2UE (this is compiled by me FTF File, I'm using it when sth goes wrong) and then, when it boots (must boot because it's not hardbrick), charge it to 100%, download 23.1.A.1.28 5.0.2 ROM from here https://docs.google.com/uc?id=0By-vo9NJkgzJVUo0dVNreFNvSjg&export=download
And flash this ROM and reboot and DO NOT UPDATE. Install KingRoot (the newest is the best) and root it, then install XZ Dual Recovery and that's all.
Hope I helped, if not, write me in comment what went wrong, and, if any errors in flashtool are shown, copy and paste to comment and let mi see them.
Click to expand...
Click to collapse
I am currently downloading https://docs.google.com/uc?id=0By-vo9NJkgzJVUo0dVNreFNvSjg&export=download and will flash soon. I just have some questions, because i fallowed this guide:
"http://forum.xda-developers.com/xperia-z2/development/stock-d6502-23-1-0-726-complete-guide-t3085893" and did install both rootkitXperia_20140719 and lockeddualrecovery. did those programs get wiped when i installed your custom ROM? Sorry for all the questions but i am trying to get a grip how the phones software works, and so i dont mess anything more up when installing kingsroot etc.
Btw. Kingsroot should i download that from google play or is it through PC? If i should download their APK.
Kingroot download apk from here http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
Then install xzdual recovery from nut via PC but turn off anti-virus because it shows virus (it's exploit) and then push prerooted zip to sdcard and install via twrp but remember to make factory reset (wipe data and cache - wiping cache can take up to 10 minutes). If you root via kingroot you won't lose data, but when installing prerooted Rom you'll lose your data (but internal memory won't be wiped)
Bruce666 said:
Kingroot download apk from here http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
Then install xzdual recovery from nut via PC but turn off anti-virus because it shows virus (it's exploit) and then push prerooted zip to sdcard and install via twrp but remember to make factory reset (wipe data and cache - wiping cache can take up to 10 minutes). If you root via kingroot you won't lose data, but when installing prerooted Rom you'll lose your data (but internal memory won't be wiped)
Click to expand...
Click to collapse
Ok thanks. so i should download the kingsroot apk and install it from my phone? correct?
Yes, but install it on 5.0.2 rom
Bruce666 said:
Yes, but install it on 5.0.2 rom
Click to expand...
Click to collapse
of course! is this the right place?
http://nut.xperia-files.com/path/XZDualRecovery/XZDualRecovery_2.8.25
btw. what does the dual recovery do? never really understood it. and whats a bootloader? Sorry for the questions
Yes, but download for Z2 filename: Z2-lockeddualrecovery2.8.25-RELEASE.combined.zip when you install it, phone will reboot to TWRP Recovery, so before you install it, place prerooted rom zip to sdcard
Bruce666 said:
Yes, but download for Z2 filename: Z2-lockeddualrecovery2.8.25-RELEASE.combined.zip when you install it, phone will reboot to TWRP Recovery, so before you install it, place prerooted rom zip to sdcard
Click to expand...
Click to collapse
Ok! so prerooted rom, is that like the flashable rom? or can i for example choose to install like Cyanagenmod?

Moto E 2nd Generation LTE bootloop issue

Hi gang!
I have a Moto E 2nd Generation here that was having some issues, browser crashing, slow downs, overheating issues due to multiple apps running, etc. So I decided to log into TWRP and attempt to do a factory reset. After this factory reset was done now I attempt to log into fastboot, which gives me the options of start, restart, factory, etc. I am just receiving a boot loop and nothing more. The steps to get this corrected is a bit jumbled and confusing, I must admit. I have installed ADB on my computer in hopes that this will be straightforward. I have downloaded some system images which I thought would help the process, negative. So if someone could help me this would be greatly appreciated.
- John
CheapStudent
cheapstudent said:
Hi gang!
I have a Moto E 2nd Generation here that was having some issues, browser crashing, slow downs, overheating issues due to multiple apps running, etc. So I decided to log into TWRP and attempt to do a factory reset. After this factory reset was done now I attempt to log into fastboot, which gives me the options of start, restart, factory, etc. I am just receiving a boot loop and nothing more. The steps to get this corrected is a bit jumbled and confusing, I must admit. I have installed ADB on my computer in hopes that this will be straightforward. I have downloaded some system images which I thought would help the process, negative. So if someone could help me this would be greatly appreciated.
- John
CheapStudent
Click to expand...
Click to collapse
Heyo John!
I can try to help since I have managed to overcome my bootloop issue and flash a custom ROM into my phone. Could I ask, are you trying to also install a custom ROM? And what version of TWRP do you have?
I had the bootloop issue because of an outdated TWRP and had to flash the latest one, which thankfully worked!
Let me know! ^_^
testerexp345 said:
Heyo John!
I can try to help since I have managed to overcome my bootloop issue and flash a custom ROM into my phone. Could I ask, are you trying to also install a custom ROM? And what version of TWRP do you have?
I had the bootloop issue because of an outdated TWRP and had to flash the latest one, which thankfully worked!
Let me know! ^_^
Click to expand...
Click to collapse
Hello testerexp345,
Thank you for the reply and the assistance, I am not sure if TWRP is installed anymore as I can't get passed the bootscreen on the phone. I hold down the volume down and power button to get the options of factory reset, shut down, restart, etc. However all these options lead back to the boot screen looping over. The ROM that I had installed on the phone was from an online seller that paired the phone with a SIM card that allowed unlimited data service, which was great for my business since I am out much of the week traveling. Any insight would help, as when it comes to flashing devices and cell phones... let's just say I am a newbie still
John C.
cheapstudent said:
Hello testerexp345,
Thank you for the reply and the assistance, I am not sure if TWRP is installed anymore as I can't get passed the bootscreen on the phone. I hold down the volume down and power button to get the options of factory reset, shut down, restart, etc. However all these options lead back to the boot screen looping over. The ROM that I had installed on the phone was from an online seller that paired the phone with a SIM card that allowed unlimited data service, which was great for my business since I am out much of the week traveling. Any insight would help, as when it comes to flashing devices and cell phones... let's just say I am a newbie still
John C.
Click to expand...
Click to collapse
To boot in bootloader while you stuck on bootlogo
Press and hold power button and volume button , and when screen goes off, quickly release power button only . don't release volume down button . now you will boot in bootloader
hamxa266 said:
To boot in bootloader while you stuck on bootlogo
Press and hold power button and volume button , and when screen goes off, quickly release power button only . don't release volume down button . now you will boot in bootloader
Click to expand...
Click to collapse
Hello hamxa266, okay I was able to get into the bootloader. All the options I choose restart the phone and put it back it back into a bootloop. I am not very familiar when it comes to using ADB.
John C.
cheapstudent said:
Hello hamxa266, okay I was able to get into the bootloader. All the options I choose restart the phone and put it back it back into a bootloop. I am not very familiar when it comes to using ADB.
John C.
Click to expand...
Click to collapse
I guess now you need to flash stock frimware using fastboot. if you are not familiar with then go and get familiar with it . It is not too hard just read few posts and thats it ..
If you need any help i am here!
Hi, I have the same issue, but I can't get it into recovery, but... Can I use "fastboot boot recovery.img"? for go into recovery for a factory reset and solve it, or I need to do something more, I have the same Moto, surnia with the bootloader locked, please I need help
testerexp345 said:
Heyo John!
I can try to help since I have managed to overcome my bootloop issue and flash a custom ROM into my phone. Could I ask, are you trying to also install a custom ROM? And what version of TWRP do you have?
I had the bootloop issue because of an outdated TWRP and had to flash the latest one, which thankfully worked!
Let me know! ^_^
Click to expand...
Click to collapse
Can u provide link for latest TWRP...??
mkranthikmr said:
Can u provide link for latest TWRP...??
Click to expand...
Click to collapse
This is the link for official twrp website
http://twrp.me/motorola/motorolamotoelte.html
Or you could use squid's twrp from here:
https://forum.xda-developers.com/mo.../twrp-squid-twrp-recovery-moto-e-lte-t3137649
shreyas_123 said:
This is the link for official twrp website
http://twrp.me/motorola/motorolamotoelte.html
Or you could use squid's twrp from here:
https://forum.xda-developers.com/mo.../twrp-squid-twrp-recovery-moto-e-lte-t3137649
Click to expand...
Click to collapse
Thank you bro... Got it already...:good:

Categories

Resources