Hey guys!
First of all i do not know if offering a donation for people helping out someone is again the rules here on xda, if so please tell me.
I will make a short intro and tell you that i yesterday received a Z2 from a friend that had upgraded himself with a newer phone so i got this one for free as a gift. (Had an Galaxy SII before)
And guess what, first thing i do is bricking it, genius..
When i got the phone i decided to "what the heck i want to root it" (because i rooted my SII without any problems) Anyhow i looked online and came across this guide made by arul20be, here on xda: http://forum.xda-developers.com/xpe...ck-d6502-03-23-4-0-546-completeguide-t3171219
So i fallowed the guide downloaded everything except that i could not use adb-setup-1.4.2 nor could i use adb-setup-1.4.3. The installation did not extract any files, so i found version 1.3 of ADB and it worked. The rest went flawlessly until i came to the last step, where i booted in to recovery with Dual recovery and installed flashable_D6503_23.4.A.0.546.zip. After that i did as instructed, cleaned cache/dalvik. After that i tried to exit the recovery and choose i think it was "power off system", you guys that are familiar with Dual recovery probably understand where i pressed. After that my phone shut down and after a while either it started up or i started it(don't remember) and it shows the SONY logo, nothing more happened. It didn't not shut down or do anything so i let it be for like an hour or so and then decided to hard shutdown it by pressing power and volume up key. i tried to start it up after a while again to see if maybe something happens, nothing happend and i let the phone be on during the night to see if anything could happen.
So today when the the story was the same i looked online to try to solve the problem, i tried to enter recovery mode by pressing on and then pressing volume up and down but nothing. Did
try to hard factory rest by pressing the red button for a couple of seconds, but nothing. it vibrates three times and then the sony logo comes up again. (is it called bootloop?)
The status now is that the phone, if plugged in to a power source like PC, or wall it will show the SONY logo even if you shut it down with power off and volume up. in other words the phone restarts itself. The only way to shut it down is to do it without a power source.
The fallowing tools+files has been used:
adb-setup-1.3.exe
flashtool-0.9.19.8-windows.exe
rootkitXperia_20140719.zip
Z2-lockeddualrecovery2.7.154-BETA.installer.zip
D6503_17.1.2.A.0.314_UK Generic.ftf
flashable_D6503_23.4.A.0.546.zip
So the thing is that i really want to upgrade myself with a new phone. In the same time i got like under one bitcoin that i had for a while and because of my stupidness i feel like i can donate to that to the first person who engages him/herself to that level so i can use my phone again.
Sorry for the long post! Thanks in advance!
axeljooo said:
Hey guys!
First of all i do not know if offering a donation for people helping out someone is again the rules here on xda, if so please tell me.
I will make a short intro and tell you that i yesterday received a Z2 from a friend that had upgraded himself with a newer phone so i got this one for free as a gift. (Had an Galaxy SII before)
And guess what, first thing i do is bricking it, genius..
When i got the phone i decided to "what the heck i want to root it" (because i rooted my SII without any problems) Anyhow i looked online and came across this guide made by arul20be, here on xda: http://forum.xda-developers.com/xpe...ck-d6502-03-23-4-0-546-completeguide-t3171219
So i fallowed the guide downloaded everything except that i could not use adb-setup-1.4.2 nor could i use adb-setup-1.4.3. The installation did not extract any files, so i found version 1.3 of ADB and it worked. The rest went flawlessly until i came to the last step, where i booted in to recovery with Dual recovery and installed flashable_D6503_23.4.A.0.546.zip. After that i did as instructed, cleaned cache/dalvik. After that i tried to exit the recovery and choose i think it was "power off system", you guys that are familiar with Dual recovery probably understand where i pressed. After that my phone shut down and after a while either it started up or i started it(don't remember) and it shows the SONY logo, nothing more happened. It didn't not shut down or do anything so i let it be for like an hour or so and then decided to hard shutdown it by pressing power and volume up key. i tried to start it up after a while again to see if maybe something happens, nothing happend and i let the phone be on during the night to see if anything could happen.
So today when the the story was the same i looked online to try to solve the problem, i tried to enter recovery mode by pressing on and then pressing volume up and down but nothing. Did
try to hard factory rest by pressing the red button for a couple of seconds, but nothing. it vibrates three times and then the sony logo comes up again. (is it called bootloop?)
The status now is that the phone, if plugged in to a power source like PC, or wall it will show the SONY logo even if you shut it down with power off and volume up. in other words the phone restarts itself. The only way to shut it down is to do it without a power source.
The fallowing tools+files has been used:
adb-setup-1.3.exe
flashtool-0.9.19.8-windows.exe
rootkitXperia_20140719.zip
Z2-lockeddualrecovery2.7.154-BETA.installer.zip
D6503_17.1.2.A.0.314_UK Generic.ftf
flashable_D6503_23.4.A.0.546.zip
So the thing is that i really want to upgrade myself with a new phone. In the same time i got like under one bitcoin that i had for a while and because of my stupidness i feel like i can donate to that to the first person who engages him/herself to that level so i can use my phone again.
Sorry for the long post! Thanks in advance!
Click to expand...
Click to collapse
Dude.. I suggest keep this phone as a showpiece.. And buy a new phone.. Z5 or Z3 with the latter being cheap... Or shell some bucks and give it to Sony service..
But i do hope your phone gets alright again..
[emoji5] [emoji5]
Sent from my D6502 using Tapatalk
EthanDev said:
Dude.. I suggest keep this phone as a showpiece.. And buy a new phone.. Z5 or Z3 with the latter being cheap... Or shell some bucks and give it to Sony service..
But i do hope your phone gets alright again..
[emoji5] [emoji5]
Sent from my D6502 using Tapatalk
Click to expand...
Click to collapse
well that was not much for help..
axeljooo said:
well that was not much for help..
Click to expand...
Click to collapse
Agree man.. But thats all you can expect from a noob [emoji13]
Sent from my D6502 using Tapatalk
Try with flashtool 0.9.18.6. On 0.9.19.x I had some problems with booting (one time stucks at sony logo, one time bootloop, one time freezes all the time, on tme flathtool crashed...)
Download Flashtool 0.9.18.6 and download and flash 23.4.A.0.546 ROM from here: https://mega.nz/#!n1YlBAhI!HX8WPPyjLDJGnUZ-9_Xom96OFZcDUfasgzjuagrj2UE (this is compiled by me FTF File, I'm using it when sth goes wrong) and then, when it boots (must boot because it's not hardbrick), charge it to 100%, download 23.1.A.1.28 5.0.2 ROM from here https://docs.google.com/uc?id=0By-vo9NJkgzJVUo0dVNreFNvSjg&export=download
And flash this ROM and reboot and DO NOT UPDATE. Install KingRoot (the newest is the best) and root it, then install XZ Dual Recovery and that's all.
Hope I helped, if not, write me in comment what went wrong, and, if any errors in flashtool are shown, copy and paste to comment and let mi see them.
Bruce666 said:
Try with flashtool 0.9.18.6. On 0.9.19.x I had some problems with booting (one time stucks at sony logo, one time bootloop, one time freezes all the time, on tme flathtool crashed...)
Download Flashtool 0.9.18.6 and download and flash 23.4.A.0.546 ROM from here: https://mega.nz/#!n1YlBAhI!HX8WPPyjLDJGnUZ-9_Xom96OFZcDUfasgzjuagrj2UE (this is compiled by me FTF File, I'm using it when sth goes wrong) and then, when it boots (must boot because it's not hardbrick), charge it to 100%, download 23.1.A.1.28 5.0.2 ROM from here https://docs.google.com/uc?id=0By-vo9NJkgzJVUo0dVNreFNvSjg&export=download
And flash this ROM and reboot and DO NOT UPDATE. Install KingRoot (the newest is the best) and root it, then install XZ Dual Recovery and that's all.
Hope I helped, if not, write me in comment what went wrong, and, if any errors in flashtool are shown, copy and paste to comment and let mi see them.
Click to expand...
Click to collapse
Thank you for the reply! i can not see how much my phone is charged and when i charge it the SONY logo shows up, so i do not know how much that drains the battery. But i will wait an hour or so then. Will try method after that! Though my phone was gone, but what i have now read myself to is that Hard brick is first when the phone is totally dead.
Before you answered i was going to do this guide:
http://forum.xda-developers.com/showpost.php?p=53220435&postcount=4
But i will go with your instead first. Should i uninstall my current flashtool and download Flashtool-0.9.18.6-windows.exe instead for now then while i wait for my phone to charge?
found this the file here https://drive.google.com/file/d/0B4sYgaP5RMK0S1pzUnMzdWd3UnM/view
Edit: did not read your post properly, will start with your custom ROM soon!
axeljooo said:
Thank you for the reply! i can not see how much my phone is charged and when i charge it the SONY logo shows up, so i do not know how much that drains the battery. But i will wait an hour or so then. Will try method after that! Though my phone was gone, but what i have now read myself to is that Hard brick is first when the phone is totally dead.
Before you answered i was going to do this guide:
http://forum.xda-developers.com/showpost.php?p=53220435&postcount=4
But i will go with your instead first. Should i uninstall my current flashtool and download Flashtool-0.9.18.6-windows.exe instead for now then while i wait for my phone to charge?
found this the file here https://drive.google.com/file/d/0B4sYgaP5RMK0S1pzUnMzdWd3UnM/view
Edit: did not read your post properly, will start with your custom ROM soon!
Click to expand...
Click to collapse
Yes, uninstall your flashtool and install 0.9.18.6
Bruce666 said:
Yes, uninstall your flashtool and install 0.9.18.6
Click to expand...
Click to collapse
of course, stupid of me
A question: was the rom 23.4.A.0.546 ROM really right for Z2? because Flashtool says hold "Back button" and plug in the phone. Z2 does not have a back button, but maybe you could house volume down?
Bruce666 said:
Yes, uninstall your flashtool and install 0.9.18.6
Click to expand...
Click to collapse
Done the first part with your custom ROM. Seems like you are getting the 0.15 BTC! will take it to next steep in an hour!
Thx!
Sorry I forgot. It requires flashmode You can reach it by pushing vol-
Bruce666 said:
Sorry I forgot. It requires flashmode You can reach it by pushing vol-
Click to expand...
Click to collapse
Did install your custom ROM without any problem!
i have charged my phone for 4h, but still only 54% charged.. so will get back here tomorrow!
axeljooo said:
Did install your custom ROM without any problem!
i have charged my phone for 4h, but still only 54% charged.. so will get back here tomorrow!
Click to expand...
Click to collapse
You can only use custom roms with an unlocked boot loader. Locked boot loader requires a sony kernel.
**edit**
Read the instructions he gave you, it's a modified stock rom so that should be fine. I've bricked mine and the flashtool has resolved it so hopefully it will for you
Um... Considering the fact that your phone boots up, I strongly recommend you to try a fresh install with pc companion.... I had somewhat a similar issue and it was the last resort for me and it worked...
Bruce666 said:
Try with flashtool 0.9.18.6. On 0.9.19.x I had some problems with booting (one time stucks at sony logo, one time bootloop, one time freezes all the time, on tme flathtool crashed...)
Download Flashtool 0.9.18.6 and download and flash 23.4.A.0.546 ROM from here: https://mega.nz/#!n1YlBAhI!HX8WPPyjLDJGnUZ-9_Xom96OFZcDUfasgzjuagrj2UE (this is compiled by me FTF File, I'm using it when sth goes wrong) and then, when it boots (must boot because it's not hardbrick), charge it to 100%, download 23.1.A.1.28 5.0.2 ROM from here https://docs.google.com/uc?id=0By-vo9NJkgzJVUo0dVNreFNvSjg&export=download
And flash this ROM and reboot and DO NOT UPDATE. Install KingRoot (the newest is the best) and root it, then install XZ Dual Recovery and that's all.
Hope I helped, if not, write me in comment what went wrong, and, if any errors in flashtool are shown, copy and paste to comment and let mi see them.
Click to expand...
Click to collapse
I am currently downloading https://docs.google.com/uc?id=0By-vo9NJkgzJVUo0dVNreFNvSjg&export=download and will flash soon. I just have some questions, because i fallowed this guide:
"http://forum.xda-developers.com/xperia-z2/development/stock-d6502-23-1-0-726-complete-guide-t3085893" and did install both rootkitXperia_20140719 and lockeddualrecovery. did those programs get wiped when i installed your custom ROM? Sorry for all the questions but i am trying to get a grip how the phones software works, and so i dont mess anything more up when installing kingsroot etc.
Btw. Kingsroot should i download that from google play or is it through PC? If i should download their APK.
Kingroot download apk from here http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
Then install xzdual recovery from nut via PC but turn off anti-virus because it shows virus (it's exploit) and then push prerooted zip to sdcard and install via twrp but remember to make factory reset (wipe data and cache - wiping cache can take up to 10 minutes). If you root via kingroot you won't lose data, but when installing prerooted Rom you'll lose your data (but internal memory won't be wiped)
Bruce666 said:
Kingroot download apk from here http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
Then install xzdual recovery from nut via PC but turn off anti-virus because it shows virus (it's exploit) and then push prerooted zip to sdcard and install via twrp but remember to make factory reset (wipe data and cache - wiping cache can take up to 10 minutes). If you root via kingroot you won't lose data, but when installing prerooted Rom you'll lose your data (but internal memory won't be wiped)
Click to expand...
Click to collapse
Ok thanks. so i should download the kingsroot apk and install it from my phone? correct?
Yes, but install it on 5.0.2 rom
Bruce666 said:
Yes, but install it on 5.0.2 rom
Click to expand...
Click to collapse
of course! is this the right place?
http://nut.xperia-files.com/path/XZDualRecovery/XZDualRecovery_2.8.25
btw. what does the dual recovery do? never really understood it. and whats a bootloader? Sorry for the questions
Yes, but download for Z2 filename: Z2-lockeddualrecovery2.8.25-RELEASE.combined.zip when you install it, phone will reboot to TWRP Recovery, so before you install it, place prerooted rom zip to sdcard
Bruce666 said:
Yes, but download for Z2 filename: Z2-lockeddualrecovery2.8.25-RELEASE.combined.zip when you install it, phone will reboot to TWRP Recovery, so before you install it, place prerooted rom zip to sdcard
Click to expand...
Click to collapse
Ok! so prerooted rom, is that like the flashable rom? or can i for example choose to install like Cyanagenmod?
Related
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
daRican! said:
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
Click to expand...
Click to collapse
You said the button still lights up? can you get into recovery? if so just wipe system and install a rom! and try flashing a kernel with flashtool!!!!
RE: Blank Screen After Flashing Custom ROM
Thanx for getting back to me so fast. As I said, the screen is blank. That is, the backlit display works but I can see nothing else. The "Home" button lights up when i press it but the display does nothing. If/When I reboot to try to enter XRecovery, I see the SonyEricsson logo followed by the backlit screen & nothing else. The Volume up/down buttons work as I am able to silence the phone by turning volume all the way down to vibrate. Because I cannot see what's on the display, I cannot turn USB on/off to connect to PC to run SEUS/Flashtool, etc. I.E. I cannot fix the device. Usually I just boot into XRecovery to fix a problem like this but that doesn't work.
x10
hy, install sony update service and repair your phone, then install again custom rom, the indications how to repair your phone software is in the program.
Best regards
Does USB need to be On or Off on the device for Update Service to run?
daRican! said:
Does USB need to be On or Off on the device for Update Service to run?
Click to expand...
Click to collapse
Update says I already have the latest Update installed.
Flash 2.3 off line update
Sent from my Xperia X10 using xda premium
daRican! said:
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
Click to expand...
Click to collapse
seem like u dont have a launcher...install launcher throuh flashtool
lilinbakar said:
seem like u dont have a launcher...install launcher throuh flashtool
Click to expand...
Click to collapse
I wish I had gotten this solution sooner. Not sure if it would have mattered. When trying to use Flashtool I kept getting an error saying my phone was not in "flash mode".
I solved my problem by flashing using Omnius & flashing firmware 'X10i_generic_SE_24_MultiTouch.rar'. This got my phone back but it was only 2.1 so I used 'DooMLoRD_v4_ROOT-zergRush-busybox-su' to get me back to 2.3, but this is where I'm at. I had Wolf's firmware before but right now I have no xRecovery installed. I thought I had rooted my phone but xRecovery isn't installed nor is Busybox.. Any ideas? Thanx in advance...EVERYONE @ XDA-DEVELOPERS rox!
I haven't replied to this post because I'm at my wit's end. I still can't get XRecovery installed & I think I've tried all the methods out there. Maybe my problem is that I restored my phone using Omnius. Flashtool works OK but I can't do anything but Flash on it. My phone is a headache now. It freezes up, crashes & sometimes won't read the SD card. Please help...
Sent from My X10a using XDA Premium
daRican! said:
I haven't replied to this post because I'm at my wit's end. I still can't get XRecovery installed & I think I've tried all the methods out there. Maybe my problem is that I restored my phone using Omnius. Flashtool works OK but I can't do anything but Flash on it. My phone is a headache now. It freezes up, crashes & sometimes won't read the SD card. Please help...
Sent from My X10a using XDA Premium
Click to expand...
Click to collapse
C if u can repair phone using SEUS now. Open the software without connecting phone. N then go to the update part. It should give u a repair option. Then follow those steps. Or else just connect ur phone n then start software. When it tells u ur phone is up to date click on that n then click on "repair". Then use the latest flashtool to root. Recoveries come with kernels so just flash a custom kernel.
Sent from my Xperia X10 using xda app-developers app
Many Thanks, I was finally able to use SEUS; before I could not. I used Flashtool to upgrade/downgrade kernel. However, I still don't have XRecovery installed & I'm not sure how to do this. I can't install XRecovery using Flashtool. Any help would be greatly appreciated. I would really like to install a custom Rom again.
I don't think u need to upgrade or downgrade.. just look for a link to download xrecovery here and follow instructions
Sent from my Xperia X10 using xda app-developers app
I'm Back, Baby!
AdX9170 said:
I don't think u need to upgrade or downgrade.. just look for a link to download xrecovery here and follow instructions
Sent from my Xperia X10 using xda app-developers app
Click to expand...
Click to collapse
I'm not sure how it went down but prior to this, I was unable to use SEUS. No matter what I did, I couldn't repair it. However, since your post, I was able to use SEUS & Flashtool to get back to where I was before I screwed up my X10a. I'm currently running Wolf's Rom (many thanx!!!) & am very satisfied w/all your help homey! You da man!
I noticed you are running ICS on your X10i. Any help so that I may partake of that deliciousness?
daRican! said:
I'm not sure how it went down but prior to this, I was unable to use SEUS. No matter what I did, I couldn't repair it. However, since your post, I was able to use SEUS & Flashtool to get back to where I was before I screwed up my X10a. I'm currently running Wolf's Rom (many thanx!!!) & am very satisfied w/all your help homey! You da man!
I noticed you are running ICS on your X10i. Any help so that I may partake of that deliciousness?
Click to expand...
Click to collapse
Ur welcome i don't think u need help you just flashed a custom ROM.. the procedure for installing ICS is the same. Although it'd be better if you are on stock before installing it.. just look for an ICS ROM that u like (I'm using feralab n it works like a charm).
Get the kernel n ROM.. as usual, put the ROM zip on ur SD card, flash the kernel, install ROM from recovery
Although before installing:
1. In recovery go to mounts n storage
2. Format system data n cache
3. Mount system, data n cache (note that if the mounting is successful the options should change to unmount system, unmount data, unmount cache respectively)
4. Then install ROM
5. The installer is GUI based so it'll guide u really well through the installation
Sent from my Xperia X10 using xda app-developers app
daRican! said:
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
Click to expand...
Click to collapse
your LCD flexibel not improperly installed or detached, just open your x10 with screwdriver, and plug it in again your LCD flexible socket.
Iam sory if my english bad
Since I flashed my rom.My phone comes on but I can see anything, even when starting I can't see anything...
I really need help..
I will appreciate if you help me sort it out.
Hi everyone,
I have an Alcatel One Touch Pop C5 (Alcatel 5036D). I made a backup in stock recovery before I installed the Xposed framework. After the installation i did a reboot but it stuck at the boot logo. Then i restored my backup but it didn't work, the screen just turned black, so after an hour i restarted my phone. Now I can't do anything, i can't even get in recovery (but it is a soft brick, i can still see the boot logo). I guess i will have to flash the ROM again but i'm a newbie (I installed some customs ROM's before but not on this phone), and no custom ROM's are available. Does anybody know what to do? I would really appreciate your help!
Here alcatel mobile upgrade software.it will give your your pop c5 zero
Xposed is not working on c5 pop because it has a rom odex
I'll try to deodex the stock ROM ...
lohanbarth said:
Here alcatel mobile upgrade software[/URL].it will give your your pop c5 zero
Xposed is not working on c5 pop because it has a rom odex
Click to expand...
Click to collapse
Thanks for your reply, but this didn't help! The program says installation was succesful but it still won't boot and I still can't get in recovery.
senna98 said:
Thanks for your reply, but this didn't help! The program says installation was succesful but it still won't boot and I still can't get in recovery.
Click to expand...
Click to collapse
You must wait a very long time after upgrade. This happened to me with xposed too. Just upgrade, follow instructionst and be patient.
DeNarco said:
You must wait a very long time after upgrade. This happened to me with xposed too. Just upgrade, follow instructionst and be patient.
Click to expand...
Click to collapse
Are you talking about the same model? Iohanbarth said it won't work because of the odex, so that's a bit strange. How long exactly did it take? I restarted my phone when the boot logo was there for about 10 minutes.
senna98 said:
Are you talking about the same model? Iohanbarth said it won't work because of the odex, so that's a bit strange. How long exactly did it take? I restarted my phone when the boot logo was there for about 10 minutes.
Click to expand...
Click to collapse
If we talking about Alcatel OT POP C5 then it is same model. I dont remember exactly how much i wait but it was around 30 mins and restarted few times. Then i go to stock recovery and wipe it and booted firs time normally. Im tolking about mobile upgrade tool not about exposed. I just mention that i soft bricked my phone with it too
DeNarco said:
If we talking about Alcatel OT POP C5 then it is same model. I dont remember exactly how much i wait but it was around 30 mins and restarted few times. Then i go to stock recovery and wipe it and booted firs time normally. Im tolking about mobile upgrade tool not about exposed. I just mention that i soft bricked my phone with it too
Click to expand...
Click to collapse
So you also got the black screen? If that is true then i just have to reset it, but still can't get into recovery!
senna98 said:
So you also got the black screen? If that is true then i just have to reset it, but still can't get into recovery!
Click to expand...
Click to collapse
Yes, black screen after mobile upgrade and noting happens for about 30 or more minutes. Then i restarted two or free times and after that i tried and i able to go to recovery. Try put out the battery and then recovery with volume+ and power
DeNarco said:
Yes, black screen after mobile upgrade and noting happens for about 30 or more minutes. Then i restarted two or free times and after that i tried and i able to go to recovery. Try put out the battery and then recovery with volume+ and power
Click to expand...
Click to collapse
Will try, but not much hope left... Is there anyway to hard reset the phone without booting, using recovery or adb? I guess not..
senna98 said:
Will try, but not much hope left... Is there anyway to hard reset the phone without booting, using recovery or adb? I guess not..
Click to expand...
Click to collapse
Dont lose hope, try again with mobile upgrade s 4.0.5, run as administrator, select one touch 5036 and do it again. Look out for your battery must have least 80 %. On Alcatel site it says: Q9 Why couldn’t I switch on the phone after using One Touch Upgrade?
It might take longer time than normal to switch on the phone after using One Touch Upgrade. Please long press the switch on key to check again.
If it still doesn’t work, please take off the battery, then insert it to check again.
If the problem persists, please try to upgrade your mobile phone’s software by One Touch Upgrade again.
wish You luck
DeNarco said:
Dont lose hope, try again with mobile upgrade s 4.0.5, run as administrator, select one touch 5036 and do it again. Look out for your battery must have least 80 %. On Alcatel site it says: Q9 Why couldn’t I switch on the phone after using One Touch Upgrade?
It might take longer time than normal to switch on the phone after using One Touch Upgrade. Please long press the switch on key to check again.
If it still doesn’t work, please take off the battery, then insert it to check again.
If the problem persists, please try to upgrade your mobile phone’s software by One Touch Upgrade again.
wish You luck
Click to expand...
Click to collapse
Dude i love you! I didn't give up because of you and kept trying. I finally got into recovery. You have to pull out the sd card, then boot with power button + volume up. The screen will be black as always, but if you do it again, the recovery is finally there. You can put the sd card back in and everything works, but it looks like my restore backup function in recovery is "broken". I will flash the custom recovery lohanbarth modified. Thank you very much, my problem is finally solved!!
danibosev said:
I'll try to deodex the stock ROM ...
Click to expand...
Click to collapse
That would be awesome! But doesn't it slow down a lot?
senna98 said:
Dude i love you! I didn't give up because of you and kept trying. I finally got into recovery. You have to pull out the sd card, then boot with power button + volume up. The screen will be black as always, but if you do it again, the recovery is finally there. You can put the sd card back in and everything works, but it looks like my restore backup function in recovery is "broken". I will flash the custom recovery lohanbarth modified. Thank you very much, my problem is finally solved!!
Click to expand...
Click to collapse
Glad to hear You succeeded
Help please !!!!!!
DeNarco said:
Glad to hear You succeeded
Click to expand...
Click to collapse
im a new with this... i was able to install ctr recovery, my phone is soft bricked (i installed gravity box jb ) rebooted and now my phone is soft bricked... so i can get into recovery mode... thats great but i dont know how to restore or get working again... i promise im not lazy, i ve read a lot here still need like tutorial on how to do it ... steps to follow thanks in advanced
hello
to you do a backup of your ROM with the CTR? If so, you removed the battery of your C5 and gives you the up volume + power 10 second and you will be in the recovery ctr.
if its not working downloaded mobile upgrade to restore your C5.
PS: XPOSED Framework does not work on POP C5
pop c5 bricked
lohanbarth said:
hello
to you do a backup of your ROM with the CTR? If so, you removed the battery of your C5 and gives you the up volume + power 10 second and you will be in the recovery ctr.
if its not working downloaded mobile upgrade to restore your C5.[/URL]
PS: XPOSED Framework does not work on POP C5
Click to expand...
Click to collapse
Thanks for replying (i dont have backups nor roms)
so...i can get into carliv CTR recovery .... i guess its different than ''stock recovery mode'' right??? so im doing the mobile upgrade workaround rightnow... will give it a try
my understanding is : once upgrade is done you wait around 40 min then try to restart phone and get into recovery mode? then wipe and boot (that should bring my c5 back to life right?)
when say wipe you mean like factory reset?
Now my question is ... When i do power button + volume up key it brings up carliv ctr recovery instead of stock recovery mode... would that make a difference for this work around???
u think i will be able to recover my c5?
thanks so much i hope it works... thanks in advanced , would like answers to my questions
Xposed Framework Version 2.3.1 with Gravity Box 3.0.2 works with Alcatel One Touch Pop C5
Be careful not to update them.
Download Links:
Xposed Framework 2.3.1.apk
Gravity Box - JellyBean - 3.0.2.apk
Alcatel 5036
There has been a software update for the POP C9 will xposed v 2.6.1 work with this?
Hello, this is my first thread at XDA, and i dont know if i put this in the right topic so feel free to move this thread.
I tried to install http://forum.xda-developers.com/xperia-u/go-development/rom-cyanogenmod-11-xperia-t2776873 on my dad's Xperia Go since the stock room is bad with custumizations and battery. I updated the stock rom with PC Companion, and then rooted it. after that i installed CWM lotus 1.0 (yeah i took the first CMW i could find for the device)
I tried every key combinstions i could come up with and that worked. so i wiped data and cache. and i got error 7 so i wiped dalviks cache. and i got error 7 when trying to install cm11. then i tried formating data, system and cache. then tried to install and got error 7. then i googled the error and got about nothing for my dad's phone. then i turned of the phone. and i found out that i had downloaded the wrong link.
so i turned on the phone again after putting the zip on mysdcard. and i cant get into CWM anymore. i get stuck on the sony screen every time. AND YES i have looked up this problem on google.
I tried using "EMMA" but it says i haddent unlocked the phone and to unlock the phone i have to turn it on....
ANyone?
really?
PLEASE!
I know im bumping this but i really need help with this!
Bump
Bump
It's probably a soft brick.
Try getting your phone into flashmode.
Try connecting it to flashtool.
If you want more information or are confused about the process, ask.
... before you hard brick your dad's Xperia.
Sent from my ST27i
Every time i try doing that it says that i have to unlock the device. But to do that you have to turn on the device.
If there is no way to fix this problem he'l buy the same phone as me, a samsung galaxy trend plus. Thar costs 500noks/100 dollar/ 50 pounds.
Flashtool does not require unlocked device.
First, read this.
now, you know basics.
second, get firmware (FTF file) for your phone from here.
you have flashtool with all drivers installed, and you have .ftf too for your phone.
do this: (ensure you have atleast 50% battery)
-select FLASH icon in flashtool
-select flashmode and not fastboot mode ( FASTBOOT requires unlocking ).
-select ftf ( the one you downloaded and pasted in flashtool firmware folder ).
-click on flash
-wait for it to ask device
-turnoff your phone, hold VOLUME DOWN button and connect the phone to pc.
-leave vol down button when flashing starts.
-wait for flashing to finish, disconnect the phone and reboot.
-enjoy
kimamb said:
Every time i try doing that it says that i have to unlock the device. But to do that you have to turn on the device.
If there is no way to fix this problem he'l buy the same phone as me, a samsung galaxy trend plus. Thar costs 500noks/100 dollar/ 50 pounds.
Click to expand...
Click to collapse
Ik sorry, diident read all that. Bur my dad has gotten a much better phone now. And its hard to read on my small phone.
Hi members,
Today morning suddenly my M4 aqua touch was not working.
I restarted phone using volume up + power button as per sony customer care guidance.
But after restarting only sony xperia logo comes and goes.
I repaired phone using sony pc companion. But no use.
After updating again sony xperia logo comes and goes continuously.
Please help me as service center is very far from my town.
Do you have access to your recovery?
Also, is your phone rooted. Gimme some details!
Sent from my SM-G530H using XDA Free mobile app
no..
heinrich.himmler said:
Do you have access to your recovery?
Also, is your phone rooted. Gimme some details!
Sent from my SM-G530H using XDA Free mobile app
Click to expand...
Click to collapse
No friend...its not rooted
Your phone seems to be stuck in a bootloop.
Press the Power button+Volume up button and hold, till you get a screen which is the recovery screen!
Now, you should be able to see options like Wipe Cache, and Factory reset.
In order to get out of this bootloop situation, first tap on Clear Cache.
Then tap on Factory reset.
THIS METHOD WILL DELETE ALL USER DATA.
But you can't really backup anything since you don't have access to the phone.
Try this out, and keep me posted.
Don't worry, All is Well!
Sent from my SM-G530H using XDA Free mobile app
No use
heinrich.himmler said:
Your phone seems to be stuck in a bootloop.
Press the Power button+Volume up button and hold, till you get a screen which is the recovery screen!
Now, you should be able to see options like Wipe Cache, and Factory reset.
In order to get out of this bootloop situation, first tap on Clear Cache.
Then tap on Factory reset.
THIS METHOD WILL DELETE ALL USER DATA.
But you can't really backup anything since you don't have access to the phone.
Try this out, and keep me posted.
Don't worry, All is Well!
Sent from my SM-G530H using XDA Free mobile app
Click to expand...
Click to collapse
After 3 hours phone booted normally...worked for 6 hours..
again touch is not working...again stuck at boot logo (comes and goes)
Try the solution I gave above
Sent from my SM-G530H using XDA Free mobile app
heinrich.himmler said:
Your phone seems to be stuck in a bootloop.
Press the Power button+Volume up button and hold, till you get a screen which is the recovery screen!
Now, you should be able to see options like Wipe Cache, and Factory reset.
In order to get out of this bootloop situation, first tap on Clear Cache.
Then tap on Factory reset.
THIS METHOD WILL DELETE ALL USER DATA.
But you can't really backup anything since you don't have access to the phone.
Try this out, and keep me posted.
Don't worry, All is Well!
Sent from my SM-G530H using XDA Free mobile app
Click to expand...
Click to collapse
hey i have this prob. too i tried to flash recovery.img and it bricked. im trying to do what you say but phone vibrates once then triple a sony logo comes and closes i need help please ((
sureshkadiri said:
Hi members,
Today morning suddenly my M4 aqua touch was not working.
I restarted phone using volume up + power button as per sony customer care guidance.
But after restarting only sony xperia logo comes and goes.
I repaired phone using sony pc companion. But no use.
After updating again sony xperia logo comes and goes continuously.
Please help me as service center is very far from my town.
Click to expand...
Click to collapse
Did you fix it? same as me :crying:
inspektors said:
Did you fix it? same as me :crying:
Click to expand...
Click to collapse
Download flashtool, flash http://forum.xda-developers.com/showthread.php?t=2489955
Set it up correctly and instal;l the drivers.
Download the ftf file for YOUR DEVICE, use this http://forum.xda-developers.com/cro...xperifirm-xperia-firmware-downloader-t2834142 ,or the last tab at the top of the flashtool.
Once you have found it, click it and download it by clicking it on the far right, make sure unpack automatically is checked.
Let it download and then flash tool will assemble it as the ftf file for you, and it will be in the correct folder. Cick the lightning button and select flash mode, select the ftf file that should apear in the list.
Folow the on screen instructions, it will take a while to flash, once finished it will say "unlug and reboot phone£
Do that and your done.
Cant fail with the flash tool
Let me know how you get on. Goodluck.
is your display ok (no small hairline cracks UNDER glass)?
I did all from your instructions and even try repair option in PC Companion but, had no errors but my e2303 remains stuck on the Sony logo (looping). I bought the phone online second hand and it arrived like that. I did bootloader unlock procedure in flashtool successfully and when i run it again it offers relock now so i assume it was good. However, if i try sony official bootloader unlock instructions via adb, i get error. I guess it's debug over usb and unknown sources related but since i can't boot to system there is no way to check that.
I'll mention i did try several ftf versions and all flashing went without errors (as with pc companion repair) but no result. Did i got scammed totally (i know i am as the phone should be working) and bought a phone that even can't get repaired?
Help guys
Do you have deleted or disabled my Xperia app before unlock? Maybe beacause this. I read when unlock and active my Xperia, phone is like paperweight
I got the phone like this, stuck on Sony/Xperia logo so i don't know what happened and what is the cause
Hi,
Apparently this is a more frequent issue than I'd have thought.... A relative of mine brought me his M4 Aqua e2303 with the same symptoms: it tries to boot, shows the Sony Logo (Xperia on the bottom of the screen) and it just loops. Screen goes off-then-on and the same thing. I've tried EVERYTHING. Bootloader was locked, so as a desperate measure I even unlocked it via Flashtool. First I tried Sony PC Companion App and automatic repair. It went smoothly but the phone was still stuck, then I flashed the last ROM via Flashtool. Again, everything went OK, but the phone was still stuck. I flashed a different ROM, the European Press version, since it's a little bit older, and suddenly something changed. The boot sequenced advanced from the Sony Screen to the waves screen, even with the music, but it just freezes and reboots itself 3 or 4 seconds after the blue-ish waves screen appears and the melody starts playing. Fastboot works, and I even pushed a custom recovery image. It boots, works, touchscreen and everything, and I can wipe everything (which I even did) but to no positive result. I've read about theft protection bricking some M4 Aqua phones, but this one had a locked bootloader, so it's out of the question (I think)
I'm absolutely dumbfounded... the only thing that comes to mind at this point is a hardware failure. My relative got the screen replaced, but everything was working fine after that, so I guess some cable/ribbon/whatever could get loose over time? Any idea?
I've learned a lot reading this thread and XDA Dev generally. Thanks, guys, great community.
hi,
i got to this problem too - M4 E2303:
1) unlocked bootloader
2) played around with the infinite possibilities of an unlocked bootloader.
3) killed android one way or another (debloating by hand, etc) - but it all worked again, thanks to the custom recovery
4) repeated step 3 a few times, until i liked the result
5) when creating the backup in recovery mode, the phone overheated constantly - so i submerged it
and this is how it went sour... i am still not sure, if the killing blow was dealt by heat, water or some other action - the phone just shuts down when i start it, while custom recovery works. flashing works also - over fastboot and the normal fashmode.
the interresting part is, that after flashing the bl back to locked even the sony recovery tool accepted it and flashed it again - but it won't boot anything else, just recovery (after unlocking and flashing it again, of course)
the only possibly useful info i got for you, is this log message in the twrp-console, which i did notice since then:
unable to recreate and-sec folder
maybe this helps others to identify the problem/solution for these strange bootloops
p.s.: even though it is only one possibility for what killed my phone: DO NOT use "the waterproof phone"(tm) under water
p.p.s: Cyanogenmod 12.1 works (well, as "well" as on any other m4) - i just installed that from an sdcard via twrp
I have a xperia m4 aqua, it have the same problems, but I´m thinking if a break glass or a crack has something to see with this problem, can you e-mail me? [email protected] please.
Hey, mine is also stuck in a bootloop.
had the wifi of for 3 days straight. Next time switching wifi on the phone just shuts down and gets stuck in a bootloop for like 45-60 minutes. Wifi is off, as soon as I activate wifi again. Same all over.
Any suggestions?
Did a restore from the original software also with other versions.
I guess its a hardware problem. But no glue how and why
got same problem here, could it be because glass is cracked?
tbo85 said:
Hey, mine is also stuck in a bootloop.
had the wifi of for 3 days straight. Next time switching wifi on the phone just shuts down and gets stuck in a bootloop for like 45-60 minutes. Wifi is off, as soon as I activate wifi again. Same all over.
Any suggestions?
Did a restore from the original software also with other versions.
I guess its a hardware problem. But no glue how and why
Click to expand...
Click to collapse
Ahm i have the same problem too. Please tell me how to use flash tools on mac os
Hello everyone,
I have the same problem. It started when i saw that i had no 4G internet connection, so i thought lets restart my phone and yes now its in the bootloop .
I tried all kinds of resets, i tried to flash my phone which i did with succes, but still have the bootloop.
Now i have some questions:
- when did your bootloop started?
- Did u play pokemon Go?
- Was your phone warm or cold?
- Could it be a storage thats full?
- Do i have to bring my phone back or do i have to buy a new one?
- Could it be an software update that caused this?
The pokemon go thing is because it is a possibility that the game overheated your phone and maybe some hardware got damaged because of that.
i'm not sure of this, but there is a great change that thats the problem.
Hope we find the answer.
Hi I am facing a problem with my moto z, i received the the 7.1.1 update and updated the same.
the first time the phone turned on but it reset after that on its own and i am not being able to get past the boot loader screen.
i am unable to turn on the usb debugging or oem unlock as i cannot even start the phone.
the phone software version shows i am on NPL26-118-20. can anyone suggest what i can do .
arnavde said:
Hi I am facing a problem with my moto z, i received the the 7.1.1 update and updated the same.
the first time the phone turned on but it reset after that on its own and i am not being able to get past the boot loader screen.
i am unable to turn on the usb debugging or oem unlock as i cannot even start the phone.
the phone software version shows i am on NPL26-118-20. can anyone suggest what i can do .
Click to expand...
Click to collapse
If you have an SD Card installed, try removing the SD card and then booting the phone.
If that works... then I bet you have a Samsung 128GB MicroSD card???? (if not, maybe another brand 128GB card?)
It seems that there is something in the 7.1.1 boot sequence for the Moto Z's that is hanging during the mount of the SD Card when it is a Samsung 128GB card. Removal of the SD allows a successful boot up.
Once boot up is complete, you should be able to insert the SD card (without rebooting the phone) and the phone will see the SD card and the "missing SD" notification will go away and the phone will function as it always has. It seems that unless Motorola/Lenovo release a patch for this issue, that your only options are 1) remove SD during every reboot, or 2) purchase a different SD card (Motorola seems to recommend SanDisk).
No there is no SD card. The phone is stuck on bootloader.
I had the same issue, stuck on bootloader and error saying recovery could not be read. I rebooted a few times and it eventually went away. Problem is that now my phone acts REALLY weird. And the Software Assistant does NOTHING to help out. It doesn't detect the phone in regular mode and in fastboot, it says everything is fine and doesn't let me restore.
I have a feeling the OTA had a problem installing and a clean slate is the only way to fix it. The only issue is that I can't find a copy of an XT1560-02 ROM anywhere, only other variants.
I had the same issue after update. Recovery could not be validated. I removed the SD card and boom perfect boot. I just hope the issue gets patched soon, would hate to have to carry that Lil key around for if I need a reboot to remove SD card before boot
Same issue. But instead of removing sd card. Just go into recovery mode and wipe cache.
Works
This helped me. If you can fastboot, this may solve your problem:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
you don't need to root or install TWRP if you don't want to.
I did id, but not luck
maumarti2k said:
This helped me. If you can fastboot, this may solve your problem:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
you don't need to root or install TWRP if you don't want to.
Click to expand...
Click to collapse
I did it, but i couldn't.. nothing happend. Y tried to unlock BootLoader too, cause the first part try something with the BL, and then, when i was unlocking, my phone said: Check 'Allow OEM Unlock' in Android Settings > Developer... And off course i can't, if i have a softbrick....
Well, i lost my warranty now too.
If anyone could help, pls help us. If anyone know how to pass that step in BL, pls tell us...
Ci' vediamo
acalapone said:
I did it, but i couldn't.. nothing happend. Y tried to unlock BootLoader too, cause the first part try something with the BL, and then, when i was unlocking, my phone said: Check 'Allow OEM Unlock' in Android Settings > Developer... And off course i can't, if i have a softbrick....
Well, i lost my warranty now too.
If anyone could help, pls help us. If anyone know how to pass that step in BL, pls tell us...
Ci' vediamo
Click to expand...
Click to collapse
Maybe you could provide more information. Have you been on Stock 7.1.1 and tried to unlock your bootloader without allowing Oem Unlocking in developer options? What is the current state of your device, means are you able to get into recovery mode?
7.1.1 Original Stock - Not Allowed OEM Unlocking
Everything was great, but a week ago the cellphone it restarted itself, and never back: It's stuck in bootloop.
I get it with Android 6.0, and i was upgrading via Ota until 1th July, which that means it's 7.1.1 Rom Stock
Cause i wanted have my cellphone pure, i didnt touch anything(I didn't want loose my warranty), so i'm never check to allow "oem unlocking"
Now, warranty doesn't help me because i bought it in Italia, and im living in Argentina now, and they said taht they have Local Warranty.
So, i tried to solved it by my self... I did it with my old phones but they were cheap, so i think is it that why i never have ear about Reset Software Factory Protection.
Brief:
Original Stock 7.1.1
Yes, i tried unlock BL without Allow OEM Unlocking
Yes, i can get in BootLoader and in fastboot without problem
Thank You very much
Maybe a factory reset might help. Switch off your phone. By holding the power button and the volume down button you get into bootloader mode. Tap volume up until you see recovery. Press power to confirm. (If you see the little green android, hold the power button for 2 sec and then press volume up) In the recovery menue select factory reset, if you choose with data wipe, be aware that you'll lose all your data. After that reboot your system. Hopefully it will boot up and you can set it up from scratch.
I did it.
bullfinch110 said:
Maybe a factory reset might help. Switch off your phone. By holding the power button and the volume down button you get into bootloader mode. Tap volume up until you see recovery. Press power to confirm. (If you see the little green android, hold the power button for 2 sec and then press volume down) In the recovery menue select factory reset, if you choose with data wipe, be aware that you'll lose all your data. After that reboot your system. Hopefully it will boot up and you can set it up from scratch.
Click to expand...
Click to collapse
Thank you very much, i have did it what you said but noyhing happend.
I try updating by ADB Sideload and it didn't starting yet...
This is sad... It is just 2 month old... :crying:
acalapone said:
Thank you very much, i have did it what you said but noyhing happend.
I try updating by ADB Sideload and it didn't starting yet...
This is sad... It is just 2 month old... :crying:
Click to expand...
Click to collapse
1. What happens, if pull out the ext sd-card and then reboot?
2. Which version of stock rom did you download?
3. Download and install RSD-lite on your pc
http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=66115
Start RSD-lite on your pc.
Then put your device in bootloader mode and connect it to your pc. Does RSD-lite show, that your device is connected?
bullfinch110 said:
1. What happens, if pull out the ext sd-card and then reboot?
2. Which version of stock rom did you download?
3. Download and install RSD-lite on your pc
http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=66115
Start RSD-lite on your pc.
Then put your device in bootloader mode and connect it to your pc. Does RSD-lite show, that your device is connected?
Click to expand...
Click to collapse
With or without SD it's the same... Anyway, i have the phone without SD and SIM now.
I dont know really which version its... I follow and download from this Tuto:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
1- Blur_Version.26.51.19.griffin.retail.en.US.zip
2- GRIFFIN_NPLS25.86-30-12_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
-------------------------------------------------------------------------------------------------------------------------
RSDLite: I download it, and yes, my phone it's showed like connected
PS: Image attached prove it..
Thank you again.
acalapone said:
With or without SD it's the same... Anyway, i have the phone without SD and SIM now.
I dont know really which version its... I follow and download from this Tuto:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
1- Blur_Version.26.51.19.griffin.retail.en.US.zip
2- GRIFFIN_NPLS25.86-30-12_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
-------------------------------------------------------------------------------------------------------------------------
RSDLite: I download it, and yes, my phone it's showed like connected
PS: Image attached prove it..
Thank you again.
Click to expand...
Click to collapse
That's good. (Sorry for the late reply, it was late and i fell asleep).
As i understood you purchased the device in italy and now you live permantly in argentina. Where did you take the 7.1.1 OTA, in Italy or in Argentina?
With the help of RSD we could try to restore your firmware. Not sure if it works for you in Argentina.
1. Download the NPL25...RETBR stockfirmware from here on your pc https://mirrors.lolinet.com/firmware/moto/griffin/official/RETBR/
2. Extract the zip and search for this file: flashall.xml and remember where to find it.
3. Run RSD on your pc
4. Reinsert your simcard (not the sdcard). Put your moto z into bootloader mode and connect it with your pc. Wait until it gets recognized.
4. Click the three little dots in RSD (left beneath the start button). Now search the flashall.xml file and double click. It will be added to the command field.
5. Click start.
RSD should now flash the firmware onto your device. This takes about 10 minutes. Wait untill your moto reboots completely and you get a PASS notification in RSD.
Hope it works. If not, we have to try plan B.
@acalapone i have edited my post above
bullfinch110 said:
That's good. (Sorry for the late reply, it was late and i fell asleep).
As i understood you purchased the device in italy and now you live permantly in argentina. Where did you take the 7.1.1 OTA, in Italy or in Argentina?
With the help of RSD we could try to restore your firmware. Not sure if it works for you in Argentina.
1. Download the NPL25...RETBR stockfirmware from here on your pc https://mirrors.lolinet.com/firmware/moto/griffin/official/RETBR/
2. Extract the zip and search for this file: flashall.xml and remember where to find it.
3. Run RSD on your pc
4. Reinsert your simcard (not the sdcard). Put your moto z into bootloader mode and connect it with your pc. Wait until it gets recognized.
4. Click the three little dots in RSD (left beneath the start button). Now search the flashall.xml file and double click. It will be added to the command field.
5. Click start.
RSD should now flash the firmware onto your device. This takes about 10 minutes. Wait untill your moto reboots completely and you get a PASS notification in RSD.
Hope it works. If not, we have to try plan B.
Click to expand...
Click to collapse
Sorry, i was quite busy...
I bought three: One to my girlfriend, one to my brother(Both are working perfect, like a charm ¬¬) and the cursed one to me, of course!!
Well, when i read "RETBR" i remember that mine cellphone said "RETEU"(or something like that) in settings, so i have checked in my girlfriend's phone, and yeah, they are RETEU and, in the link that you have shared with me, i found one that said that.
I have downloaded both of them, just in case.
Now i'm have try with RETBR, and it didn't work
Now im going to try "RETEU", and, you know, i'm feeling lucky!
Let's cross our fingers
---------- Post added at 12:23 AM ---------- Previous post was at 12:02 AM ----------
Ok, no... It didn't work too.... X-(
I have tried with this one: XT1650-03_GRIFFIN_RETEU-EMEA_6.0.1_MPL24.246-17_cid50_subsidy-DEFAULT_regulatory-03_CFC_EMEA.xml
Yeah, i know... It's 6.0.1 ...
Well, i'm all yours
Thank you anyway...
acalapone said:
Sorry, i was quite busy...
I bought three: One to my girlfriend, one to my brother(Both are working perfect, like a charm ¬¬) and the cursed one to me, of course!!
Well, when i read "RETBR" i remember that mine cellphone said "RETEU"(or something like that) in settings, so i have checked in my girlfriend's phone, and yeah, they are RETEU and, in the link that you have shared with me, i found one that said that.
I have downloaded both of them, just in case.
Now i'm have try with RETBR, and it didn't work
Now im going to try "RETEU", and, you know, i'm feeling lucky!
Let's cross our fingers
---------- Post added at 12:23 AM ---------- Previous post was at 12:02 AM ----------
Ok, no... It didn't work too.... X-(
I have tried with this one: XT1650-03_GRIFFIN_RETEU-EMEA_6.0.1_MPL24.246-17_cid50_subsidy-DEFAULT_regulatory-03_CFC_EMEA.xml
Yeah, i know... It's 6.0.1 ...
Well, i'm all yours
Thank you anyway...
Click to expand...
Click to collapse
You cannot go back to 6.x after updating the bootloader to 7.x
lollyjay said:
You cannot go back to 6.x after updating the bootloader to 7.x
Click to expand...
Click to collapse
Yes, i know it... But in my despair i didn't read it, then.. when fail, i read it.
Thank you anyway
acalapone said:
Yes, i know it... But in my despair i didn't read it, then.. when fail, i read it.
Thank you anyway
Click to expand...
Click to collapse
There is still no RETEU 7.0 available, thats why you have to flash the RETBR.
Try again to flash the RETBR NPL25..firmware with RSD. If you'll get the same failed error message, here is
PLAN B:
Copy the flashall.xml file and rename it to flashallcopy.xml.
Open the copied file with a text editor and delete the 2 lines with "gpt" and "bootloader" in it. Save it and close the copy. With this the RSD program will skip those two commands. Click the 3 dots and add the flashallcopy.xml file to RSD. Click Start.
If that doesn't work, we have to run Plan C
Good luck