Related
hi..i did sumthing silly!! was going to flash a custom 2.2 rom but i ripped out the battery thinking that i could stop the installation process coz i forgot to wipe the caches...now the thing's stuck at the logo screen...anyone can help me???? cannot even access xrec anymore...
doggybone said:
hi..i did sumthing silly!! was going to flash a custom 2.2 rom but i ripped out the battery thinking that i could stop the installation process coz i forgot to wipe the caches...now the thing's stuck at the logo screen...anyone can help me???? cannot even access xrec anymore...
Click to expand...
Click to collapse
Plug your phone into the computer and reflash with SEUS. I believe thats your only choice now.....well that and the flashtool.
yup...trying to use the flashtool now...downloading the latest one so hopefully can use a generic rom / install the xrecovery via flashtool first...
but i am still downloading it....bloody connection is so slow here...
Thanks!
Thankfully, you can't actually brick this phone unless it has real hardware failure. All you gotta do is remove the battery (to get it to turn off), then put it back in like 30 seconds later, hold the back button while plugging in usb, then you are in flash mode to install whatever rom you'd like with seus or flashtool
it's alive!!! ahahahahaha...thanks!
so this means it is QUITE the unbrickable!!
unbrickable x10... until u stomp on it .... hahahahaha
Good people of XDA, please hear me out on my problem and help me if possible!
Somehow i managed to get my Sony Xperia Mini Pro (SK17i) bricked!
I tried to root it through the Doomlord method, but when i booted my phone after following EVERY step in the process, the only thing i got was my phone vibrating for like half a second, the red led flashing continuously and the back button lit up brightly. After like 10 seconds of this behaviour my phone simply shuts down and the same process happens again after a few moments. This goes on until i remove the battery.
I have looked for a solution for this kind of brick but i found no clear explanation as to what i should do to fix this...
I have also tried to:
1. Access flash mode by connecting a USB cable while holding the volume down button.
2. Fix the software through Sony Ericsson's PC Companion.
Obviously, without any success...
Don't know if this is of any use but my phone was bought in belgium so it probably runs on European firmware, it was also updated to the latest version of android available on this phone (the 4.1.B.0.587 version).
I'm not a complete noob to rooting and flashing custom ROMs anymore so i doubt that i actually forked up on the rooting process, but so far i'm all out of ideas!
Would anyone be so kind to give me a clear explanation on how to solve this issue?
Kind regards,
A confused Papelierke.
Papelierke said:
Good people of XDA, please hear me out on my problem and help me if possible!
Somehow i managed to get my Sony Xperia Mini Pro (SK17i) bricked!
I tried to root it through the Doomlord method, but when i booted my phone after following EVERY step in the process, the only thing i got was my phone vibrating for like half a second, the red led flashing continuously and the back button lit up brightly. After like 10 seconds of this behaviour my phone simply shuts down and the same process happens again after a few moments. This goes on until i remove the battery.
I have looked for a solution for this kind of brick but i found no clear explanation as to what i should do to fix this...
I have also tried to:
1. Access flash mode by connecting a USB cable while holding the volume down button.
2. Fix the software through Sony Ericsson's PC Companion.
Obviously, without any success...
Don't know if this is of any use but my phone was bought in belgium so it probably runs on European firmware, it was also updated to the latest version of android available on this phone (the 4.1.B.0.587 version).
I'm not a complete noob to rooting and flashing custom ROMs anymore so i doubt that i actually forked up on the rooting process, but so far i'm all out of ideas!
Would anyone be so kind to give me a clear explanation on how to solve this issue?
Kind regards,
A confused Papelierke.
Click to expand...
Click to collapse
I think that happened after ure flashing MT11i_4.1.A.0.562_kernel.ftf rite?
coz after flashing that kernel ure device wont work as normal, only light on back button.
u can try this.
- remove ur battery and put it back
- double click runme.bat on ur rooting kit folder then press any key
- turn on ur device and connect it to ur pc
- see the progress on cmd, when u see device found enabling emulator hack, ur rooting method almost done. wait until all steps finish.
- flash sk17_4.1.b.0.587_kernel.ftf to run ur device normally
Hi members,
Today morning suddenly my M4 aqua touch was not working.
I restarted phone using volume up + power button as per sony customer care guidance.
But after restarting only sony xperia logo comes and goes.
I repaired phone using sony pc companion. But no use.
After updating again sony xperia logo comes and goes continuously.
Please help me as service center is very far from my town.
Do you have access to your recovery?
Also, is your phone rooted. Gimme some details!
Sent from my SM-G530H using XDA Free mobile app
no..
heinrich.himmler said:
Do you have access to your recovery?
Also, is your phone rooted. Gimme some details!
Sent from my SM-G530H using XDA Free mobile app
Click to expand...
Click to collapse
No friend...its not rooted
Your phone seems to be stuck in a bootloop.
Press the Power button+Volume up button and hold, till you get a screen which is the recovery screen!
Now, you should be able to see options like Wipe Cache, and Factory reset.
In order to get out of this bootloop situation, first tap on Clear Cache.
Then tap on Factory reset.
THIS METHOD WILL DELETE ALL USER DATA.
But you can't really backup anything since you don't have access to the phone.
Try this out, and keep me posted.
Don't worry, All is Well!
Sent from my SM-G530H using XDA Free mobile app
No use
heinrich.himmler said:
Your phone seems to be stuck in a bootloop.
Press the Power button+Volume up button and hold, till you get a screen which is the recovery screen!
Now, you should be able to see options like Wipe Cache, and Factory reset.
In order to get out of this bootloop situation, first tap on Clear Cache.
Then tap on Factory reset.
THIS METHOD WILL DELETE ALL USER DATA.
But you can't really backup anything since you don't have access to the phone.
Try this out, and keep me posted.
Don't worry, All is Well!
Sent from my SM-G530H using XDA Free mobile app
Click to expand...
Click to collapse
After 3 hours phone booted normally...worked for 6 hours..
again touch is not working...again stuck at boot logo (comes and goes)
Try the solution I gave above
Sent from my SM-G530H using XDA Free mobile app
heinrich.himmler said:
Your phone seems to be stuck in a bootloop.
Press the Power button+Volume up button and hold, till you get a screen which is the recovery screen!
Now, you should be able to see options like Wipe Cache, and Factory reset.
In order to get out of this bootloop situation, first tap on Clear Cache.
Then tap on Factory reset.
THIS METHOD WILL DELETE ALL USER DATA.
But you can't really backup anything since you don't have access to the phone.
Try this out, and keep me posted.
Don't worry, All is Well!
Sent from my SM-G530H using XDA Free mobile app
Click to expand...
Click to collapse
hey i have this prob. too i tried to flash recovery.img and it bricked. im trying to do what you say but phone vibrates once then triple a sony logo comes and closes i need help please ((
sureshkadiri said:
Hi members,
Today morning suddenly my M4 aqua touch was not working.
I restarted phone using volume up + power button as per sony customer care guidance.
But after restarting only sony xperia logo comes and goes.
I repaired phone using sony pc companion. But no use.
After updating again sony xperia logo comes and goes continuously.
Please help me as service center is very far from my town.
Click to expand...
Click to collapse
Did you fix it? same as me :crying:
inspektors said:
Did you fix it? same as me :crying:
Click to expand...
Click to collapse
Download flashtool, flash http://forum.xda-developers.com/showthread.php?t=2489955
Set it up correctly and instal;l the drivers.
Download the ftf file for YOUR DEVICE, use this http://forum.xda-developers.com/cro...xperifirm-xperia-firmware-downloader-t2834142 ,or the last tab at the top of the flashtool.
Once you have found it, click it and download it by clicking it on the far right, make sure unpack automatically is checked.
Let it download and then flash tool will assemble it as the ftf file for you, and it will be in the correct folder. Cick the lightning button and select flash mode, select the ftf file that should apear in the list.
Folow the on screen instructions, it will take a while to flash, once finished it will say "unlug and reboot phone£
Do that and your done.
Cant fail with the flash tool
Let me know how you get on. Goodluck.
is your display ok (no small hairline cracks UNDER glass)?
I did all from your instructions and even try repair option in PC Companion but, had no errors but my e2303 remains stuck on the Sony logo (looping). I bought the phone online second hand and it arrived like that. I did bootloader unlock procedure in flashtool successfully and when i run it again it offers relock now so i assume it was good. However, if i try sony official bootloader unlock instructions via adb, i get error. I guess it's debug over usb and unknown sources related but since i can't boot to system there is no way to check that.
I'll mention i did try several ftf versions and all flashing went without errors (as with pc companion repair) but no result. Did i got scammed totally (i know i am as the phone should be working) and bought a phone that even can't get repaired?
Help guys
Do you have deleted or disabled my Xperia app before unlock? Maybe beacause this. I read when unlock and active my Xperia, phone is like paperweight
I got the phone like this, stuck on Sony/Xperia logo so i don't know what happened and what is the cause
Hi,
Apparently this is a more frequent issue than I'd have thought.... A relative of mine brought me his M4 Aqua e2303 with the same symptoms: it tries to boot, shows the Sony Logo (Xperia on the bottom of the screen) and it just loops. Screen goes off-then-on and the same thing. I've tried EVERYTHING. Bootloader was locked, so as a desperate measure I even unlocked it via Flashtool. First I tried Sony PC Companion App and automatic repair. It went smoothly but the phone was still stuck, then I flashed the last ROM via Flashtool. Again, everything went OK, but the phone was still stuck. I flashed a different ROM, the European Press version, since it's a little bit older, and suddenly something changed. The boot sequenced advanced from the Sony Screen to the waves screen, even with the music, but it just freezes and reboots itself 3 or 4 seconds after the blue-ish waves screen appears and the melody starts playing. Fastboot works, and I even pushed a custom recovery image. It boots, works, touchscreen and everything, and I can wipe everything (which I even did) but to no positive result. I've read about theft protection bricking some M4 Aqua phones, but this one had a locked bootloader, so it's out of the question (I think)
I'm absolutely dumbfounded... the only thing that comes to mind at this point is a hardware failure. My relative got the screen replaced, but everything was working fine after that, so I guess some cable/ribbon/whatever could get loose over time? Any idea?
I've learned a lot reading this thread and XDA Dev generally. Thanks, guys, great community.
hi,
i got to this problem too - M4 E2303:
1) unlocked bootloader
2) played around with the infinite possibilities of an unlocked bootloader.
3) killed android one way or another (debloating by hand, etc) - but it all worked again, thanks to the custom recovery
4) repeated step 3 a few times, until i liked the result
5) when creating the backup in recovery mode, the phone overheated constantly - so i submerged it
and this is how it went sour... i am still not sure, if the killing blow was dealt by heat, water or some other action - the phone just shuts down when i start it, while custom recovery works. flashing works also - over fastboot and the normal fashmode.
the interresting part is, that after flashing the bl back to locked even the sony recovery tool accepted it and flashed it again - but it won't boot anything else, just recovery (after unlocking and flashing it again, of course)
the only possibly useful info i got for you, is this log message in the twrp-console, which i did notice since then:
unable to recreate and-sec folder
maybe this helps others to identify the problem/solution for these strange bootloops
p.s.: even though it is only one possibility for what killed my phone: DO NOT use "the waterproof phone"(tm) under water
p.p.s: Cyanogenmod 12.1 works (well, as "well" as on any other m4) - i just installed that from an sdcard via twrp
I have a xperia m4 aqua, it have the same problems, but I´m thinking if a break glass or a crack has something to see with this problem, can you e-mail me? [email protected] please.
Hey, mine is also stuck in a bootloop.
had the wifi of for 3 days straight. Next time switching wifi on the phone just shuts down and gets stuck in a bootloop for like 45-60 minutes. Wifi is off, as soon as I activate wifi again. Same all over.
Any suggestions?
Did a restore from the original software also with other versions.
I guess its a hardware problem. But no glue how and why
got same problem here, could it be because glass is cracked?
tbo85 said:
Hey, mine is also stuck in a bootloop.
had the wifi of for 3 days straight. Next time switching wifi on the phone just shuts down and gets stuck in a bootloop for like 45-60 minutes. Wifi is off, as soon as I activate wifi again. Same all over.
Any suggestions?
Did a restore from the original software also with other versions.
I guess its a hardware problem. But no glue how and why
Click to expand...
Click to collapse
Ahm i have the same problem too. Please tell me how to use flash tools on mac os
Hello everyone,
I have the same problem. It started when i saw that i had no 4G internet connection, so i thought lets restart my phone and yes now its in the bootloop .
I tried all kinds of resets, i tried to flash my phone which i did with succes, but still have the bootloop.
Now i have some questions:
- when did your bootloop started?
- Did u play pokemon Go?
- Was your phone warm or cold?
- Could it be a storage thats full?
- Do i have to bring my phone back or do i have to buy a new one?
- Could it be an software update that caused this?
The pokemon go thing is because it is a possibility that the game overheated your phone and maybe some hardware got damaged because of that.
i'm not sure of this, but there is a great change that thats the problem.
Hope we find the answer.
Hey guys!
First of all i do not know if offering a donation for people helping out someone is again the rules here on xda, if so please tell me.
I will make a short intro and tell you that i yesterday received a Z2 from a friend that had upgraded himself with a newer phone so i got this one for free as a gift. (Had an Galaxy SII before)
And guess what, first thing i do is bricking it, genius..
When i got the phone i decided to "what the heck i want to root it" (because i rooted my SII without any problems) Anyhow i looked online and came across this guide made by arul20be, here on xda: http://forum.xda-developers.com/xpe...ck-d6502-03-23-4-0-546-completeguide-t3171219
So i fallowed the guide downloaded everything except that i could not use adb-setup-1.4.2 nor could i use adb-setup-1.4.3. The installation did not extract any files, so i found version 1.3 of ADB and it worked. The rest went flawlessly until i came to the last step, where i booted in to recovery with Dual recovery and installed flashable_D6503_23.4.A.0.546.zip. After that i did as instructed, cleaned cache/dalvik. After that i tried to exit the recovery and choose i think it was "power off system", you guys that are familiar with Dual recovery probably understand where i pressed. After that my phone shut down and after a while either it started up or i started it(don't remember) and it shows the SONY logo, nothing more happened. It didn't not shut down or do anything so i let it be for like an hour or so and then decided to hard shutdown it by pressing power and volume up key. i tried to start it up after a while again to see if maybe something happens, nothing happend and i let the phone be on during the night to see if anything could happen.
So today when the the story was the same i looked online to try to solve the problem, i tried to enter recovery mode by pressing on and then pressing volume up and down but nothing. Did
try to hard factory rest by pressing the red button for a couple of seconds, but nothing. it vibrates three times and then the sony logo comes up again. (is it called bootloop?)
The status now is that the phone, if plugged in to a power source like PC, or wall it will show the SONY logo even if you shut it down with power off and volume up. in other words the phone restarts itself. The only way to shut it down is to do it without a power source.
The fallowing tools+files has been used:
adb-setup-1.3.exe
flashtool-0.9.19.8-windows.exe
rootkitXperia_20140719.zip
Z2-lockeddualrecovery2.7.154-BETA.installer.zip
D6503_17.1.2.A.0.314_UK Generic.ftf
flashable_D6503_23.4.A.0.546.zip
So the thing is that i really want to upgrade myself with a new phone. In the same time i got like under one bitcoin that i had for a while and because of my stupidness i feel like i can donate to that to the first person who engages him/herself to that level so i can use my phone again.
Sorry for the long post! Thanks in advance!
axeljooo said:
Hey guys!
First of all i do not know if offering a donation for people helping out someone is again the rules here on xda, if so please tell me.
I will make a short intro and tell you that i yesterday received a Z2 from a friend that had upgraded himself with a newer phone so i got this one for free as a gift. (Had an Galaxy SII before)
And guess what, first thing i do is bricking it, genius..
When i got the phone i decided to "what the heck i want to root it" (because i rooted my SII without any problems) Anyhow i looked online and came across this guide made by arul20be, here on xda: http://forum.xda-developers.com/xpe...ck-d6502-03-23-4-0-546-completeguide-t3171219
So i fallowed the guide downloaded everything except that i could not use adb-setup-1.4.2 nor could i use adb-setup-1.4.3. The installation did not extract any files, so i found version 1.3 of ADB and it worked. The rest went flawlessly until i came to the last step, where i booted in to recovery with Dual recovery and installed flashable_D6503_23.4.A.0.546.zip. After that i did as instructed, cleaned cache/dalvik. After that i tried to exit the recovery and choose i think it was "power off system", you guys that are familiar with Dual recovery probably understand where i pressed. After that my phone shut down and after a while either it started up or i started it(don't remember) and it shows the SONY logo, nothing more happened. It didn't not shut down or do anything so i let it be for like an hour or so and then decided to hard shutdown it by pressing power and volume up key. i tried to start it up after a while again to see if maybe something happens, nothing happend and i let the phone be on during the night to see if anything could happen.
So today when the the story was the same i looked online to try to solve the problem, i tried to enter recovery mode by pressing on and then pressing volume up and down but nothing. Did
try to hard factory rest by pressing the red button for a couple of seconds, but nothing. it vibrates three times and then the sony logo comes up again. (is it called bootloop?)
The status now is that the phone, if plugged in to a power source like PC, or wall it will show the SONY logo even if you shut it down with power off and volume up. in other words the phone restarts itself. The only way to shut it down is to do it without a power source.
The fallowing tools+files has been used:
adb-setup-1.3.exe
flashtool-0.9.19.8-windows.exe
rootkitXperia_20140719.zip
Z2-lockeddualrecovery2.7.154-BETA.installer.zip
D6503_17.1.2.A.0.314_UK Generic.ftf
flashable_D6503_23.4.A.0.546.zip
So the thing is that i really want to upgrade myself with a new phone. In the same time i got like under one bitcoin that i had for a while and because of my stupidness i feel like i can donate to that to the first person who engages him/herself to that level so i can use my phone again.
Sorry for the long post! Thanks in advance!
Click to expand...
Click to collapse
Dude.. I suggest keep this phone as a showpiece.. And buy a new phone.. Z5 or Z3 with the latter being cheap... Or shell some bucks and give it to Sony service..
But i do hope your phone gets alright again..
[emoji5] [emoji5]
Sent from my D6502 using Tapatalk
EthanDev said:
Dude.. I suggest keep this phone as a showpiece.. And buy a new phone.. Z5 or Z3 with the latter being cheap... Or shell some bucks and give it to Sony service..
But i do hope your phone gets alright again..
[emoji5] [emoji5]
Sent from my D6502 using Tapatalk
Click to expand...
Click to collapse
well that was not much for help..
axeljooo said:
well that was not much for help..
Click to expand...
Click to collapse
Agree man.. But thats all you can expect from a noob [emoji13]
Sent from my D6502 using Tapatalk
Try with flashtool 0.9.18.6. On 0.9.19.x I had some problems with booting (one time stucks at sony logo, one time bootloop, one time freezes all the time, on tme flathtool crashed...)
Download Flashtool 0.9.18.6 and download and flash 23.4.A.0.546 ROM from here: https://mega.nz/#!n1YlBAhI!HX8WPPyjLDJGnUZ-9_Xom96OFZcDUfasgzjuagrj2UE (this is compiled by me FTF File, I'm using it when sth goes wrong) and then, when it boots (must boot because it's not hardbrick), charge it to 100%, download 23.1.A.1.28 5.0.2 ROM from here https://docs.google.com/uc?id=0By-vo9NJkgzJVUo0dVNreFNvSjg&export=download
And flash this ROM and reboot and DO NOT UPDATE. Install KingRoot (the newest is the best) and root it, then install XZ Dual Recovery and that's all.
Hope I helped, if not, write me in comment what went wrong, and, if any errors in flashtool are shown, copy and paste to comment and let mi see them.
Bruce666 said:
Try with flashtool 0.9.18.6. On 0.9.19.x I had some problems with booting (one time stucks at sony logo, one time bootloop, one time freezes all the time, on tme flathtool crashed...)
Download Flashtool 0.9.18.6 and download and flash 23.4.A.0.546 ROM from here: https://mega.nz/#!n1YlBAhI!HX8WPPyjLDJGnUZ-9_Xom96OFZcDUfasgzjuagrj2UE (this is compiled by me FTF File, I'm using it when sth goes wrong) and then, when it boots (must boot because it's not hardbrick), charge it to 100%, download 23.1.A.1.28 5.0.2 ROM from here https://docs.google.com/uc?id=0By-vo9NJkgzJVUo0dVNreFNvSjg&export=download
And flash this ROM and reboot and DO NOT UPDATE. Install KingRoot (the newest is the best) and root it, then install XZ Dual Recovery and that's all.
Hope I helped, if not, write me in comment what went wrong, and, if any errors in flashtool are shown, copy and paste to comment and let mi see them.
Click to expand...
Click to collapse
Thank you for the reply! i can not see how much my phone is charged and when i charge it the SONY logo shows up, so i do not know how much that drains the battery. But i will wait an hour or so then. Will try method after that! Though my phone was gone, but what i have now read myself to is that Hard brick is first when the phone is totally dead.
Before you answered i was going to do this guide:
http://forum.xda-developers.com/showpost.php?p=53220435&postcount=4
But i will go with your instead first. Should i uninstall my current flashtool and download Flashtool-0.9.18.6-windows.exe instead for now then while i wait for my phone to charge?
found this the file here https://drive.google.com/file/d/0B4sYgaP5RMK0S1pzUnMzdWd3UnM/view
Edit: did not read your post properly, will start with your custom ROM soon!
axeljooo said:
Thank you for the reply! i can not see how much my phone is charged and when i charge it the SONY logo shows up, so i do not know how much that drains the battery. But i will wait an hour or so then. Will try method after that! Though my phone was gone, but what i have now read myself to is that Hard brick is first when the phone is totally dead.
Before you answered i was going to do this guide:
http://forum.xda-developers.com/showpost.php?p=53220435&postcount=4
But i will go with your instead first. Should i uninstall my current flashtool and download Flashtool-0.9.18.6-windows.exe instead for now then while i wait for my phone to charge?
found this the file here https://drive.google.com/file/d/0B4sYgaP5RMK0S1pzUnMzdWd3UnM/view
Edit: did not read your post properly, will start with your custom ROM soon!
Click to expand...
Click to collapse
Yes, uninstall your flashtool and install 0.9.18.6
Bruce666 said:
Yes, uninstall your flashtool and install 0.9.18.6
Click to expand...
Click to collapse
of course, stupid of me
A question: was the rom 23.4.A.0.546 ROM really right for Z2? because Flashtool says hold "Back button" and plug in the phone. Z2 does not have a back button, but maybe you could house volume down?
Bruce666 said:
Yes, uninstall your flashtool and install 0.9.18.6
Click to expand...
Click to collapse
Done the first part with your custom ROM. Seems like you are getting the 0.15 BTC! will take it to next steep in an hour!
Thx!
Sorry I forgot. It requires flashmode You can reach it by pushing vol-
Bruce666 said:
Sorry I forgot. It requires flashmode You can reach it by pushing vol-
Click to expand...
Click to collapse
Did install your custom ROM without any problem!
i have charged my phone for 4h, but still only 54% charged.. so will get back here tomorrow!
axeljooo said:
Did install your custom ROM without any problem!
i have charged my phone for 4h, but still only 54% charged.. so will get back here tomorrow!
Click to expand...
Click to collapse
You can only use custom roms with an unlocked boot loader. Locked boot loader requires a sony kernel.
**edit**
Read the instructions he gave you, it's a modified stock rom so that should be fine. I've bricked mine and the flashtool has resolved it so hopefully it will for you
Um... Considering the fact that your phone boots up, I strongly recommend you to try a fresh install with pc companion.... I had somewhat a similar issue and it was the last resort for me and it worked...
Bruce666 said:
Try with flashtool 0.9.18.6. On 0.9.19.x I had some problems with booting (one time stucks at sony logo, one time bootloop, one time freezes all the time, on tme flathtool crashed...)
Download Flashtool 0.9.18.6 and download and flash 23.4.A.0.546 ROM from here: https://mega.nz/#!n1YlBAhI!HX8WPPyjLDJGnUZ-9_Xom96OFZcDUfasgzjuagrj2UE (this is compiled by me FTF File, I'm using it when sth goes wrong) and then, when it boots (must boot because it's not hardbrick), charge it to 100%, download 23.1.A.1.28 5.0.2 ROM from here https://docs.google.com/uc?id=0By-vo9NJkgzJVUo0dVNreFNvSjg&export=download
And flash this ROM and reboot and DO NOT UPDATE. Install KingRoot (the newest is the best) and root it, then install XZ Dual Recovery and that's all.
Hope I helped, if not, write me in comment what went wrong, and, if any errors in flashtool are shown, copy and paste to comment and let mi see them.
Click to expand...
Click to collapse
I am currently downloading https://docs.google.com/uc?id=0By-vo9NJkgzJVUo0dVNreFNvSjg&export=download and will flash soon. I just have some questions, because i fallowed this guide:
"http://forum.xda-developers.com/xperia-z2/development/stock-d6502-23-1-0-726-complete-guide-t3085893" and did install both rootkitXperia_20140719 and lockeddualrecovery. did those programs get wiped when i installed your custom ROM? Sorry for all the questions but i am trying to get a grip how the phones software works, and so i dont mess anything more up when installing kingsroot etc.
Btw. Kingsroot should i download that from google play or is it through PC? If i should download their APK.
Kingroot download apk from here http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
Then install xzdual recovery from nut via PC but turn off anti-virus because it shows virus (it's exploit) and then push prerooted zip to sdcard and install via twrp but remember to make factory reset (wipe data and cache - wiping cache can take up to 10 minutes). If you root via kingroot you won't lose data, but when installing prerooted Rom you'll lose your data (but internal memory won't be wiped)
Bruce666 said:
Kingroot download apk from here http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
Then install xzdual recovery from nut via PC but turn off anti-virus because it shows virus (it's exploit) and then push prerooted zip to sdcard and install via twrp but remember to make factory reset (wipe data and cache - wiping cache can take up to 10 minutes). If you root via kingroot you won't lose data, but when installing prerooted Rom you'll lose your data (but internal memory won't be wiped)
Click to expand...
Click to collapse
Ok thanks. so i should download the kingsroot apk and install it from my phone? correct?
Yes, but install it on 5.0.2 rom
Bruce666 said:
Yes, but install it on 5.0.2 rom
Click to expand...
Click to collapse
of course! is this the right place?
http://nut.xperia-files.com/path/XZDualRecovery/XZDualRecovery_2.8.25
btw. what does the dual recovery do? never really understood it. and whats a bootloader? Sorry for the questions
Yes, but download for Z2 filename: Z2-lockeddualrecovery2.8.25-RELEASE.combined.zip when you install it, phone will reboot to TWRP Recovery, so before you install it, place prerooted rom zip to sdcard
Bruce666 said:
Yes, but download for Z2 filename: Z2-lockeddualrecovery2.8.25-RELEASE.combined.zip when you install it, phone will reboot to TWRP Recovery, so before you install it, place prerooted rom zip to sdcard
Click to expand...
Click to collapse
Ok! so prerooted rom, is that like the flashable rom? or can i for example choose to install like Cyanagenmod?
Hi I am facing a problem with my moto z, i received the the 7.1.1 update and updated the same.
the first time the phone turned on but it reset after that on its own and i am not being able to get past the boot loader screen.
i am unable to turn on the usb debugging or oem unlock as i cannot even start the phone.
the phone software version shows i am on NPL26-118-20. can anyone suggest what i can do .
arnavde said:
Hi I am facing a problem with my moto z, i received the the 7.1.1 update and updated the same.
the first time the phone turned on but it reset after that on its own and i am not being able to get past the boot loader screen.
i am unable to turn on the usb debugging or oem unlock as i cannot even start the phone.
the phone software version shows i am on NPL26-118-20. can anyone suggest what i can do .
Click to expand...
Click to collapse
If you have an SD Card installed, try removing the SD card and then booting the phone.
If that works... then I bet you have a Samsung 128GB MicroSD card???? (if not, maybe another brand 128GB card?)
It seems that there is something in the 7.1.1 boot sequence for the Moto Z's that is hanging during the mount of the SD Card when it is a Samsung 128GB card. Removal of the SD allows a successful boot up.
Once boot up is complete, you should be able to insert the SD card (without rebooting the phone) and the phone will see the SD card and the "missing SD" notification will go away and the phone will function as it always has. It seems that unless Motorola/Lenovo release a patch for this issue, that your only options are 1) remove SD during every reboot, or 2) purchase a different SD card (Motorola seems to recommend SanDisk).
No there is no SD card. The phone is stuck on bootloader.
I had the same issue, stuck on bootloader and error saying recovery could not be read. I rebooted a few times and it eventually went away. Problem is that now my phone acts REALLY weird. And the Software Assistant does NOTHING to help out. It doesn't detect the phone in regular mode and in fastboot, it says everything is fine and doesn't let me restore.
I have a feeling the OTA had a problem installing and a clean slate is the only way to fix it. The only issue is that I can't find a copy of an XT1560-02 ROM anywhere, only other variants.
I had the same issue after update. Recovery could not be validated. I removed the SD card and boom perfect boot. I just hope the issue gets patched soon, would hate to have to carry that Lil key around for if I need a reboot to remove SD card before boot
Same issue. But instead of removing sd card. Just go into recovery mode and wipe cache.
Works
This helped me. If you can fastboot, this may solve your problem:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
you don't need to root or install TWRP if you don't want to.
I did id, but not luck
maumarti2k said:
This helped me. If you can fastboot, this may solve your problem:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
you don't need to root or install TWRP if you don't want to.
Click to expand...
Click to collapse
I did it, but i couldn't.. nothing happend. Y tried to unlock BootLoader too, cause the first part try something with the BL, and then, when i was unlocking, my phone said: Check 'Allow OEM Unlock' in Android Settings > Developer... And off course i can't, if i have a softbrick....
Well, i lost my warranty now too.
If anyone could help, pls help us. If anyone know how to pass that step in BL, pls tell us...
Ci' vediamo
acalapone said:
I did it, but i couldn't.. nothing happend. Y tried to unlock BootLoader too, cause the first part try something with the BL, and then, when i was unlocking, my phone said: Check 'Allow OEM Unlock' in Android Settings > Developer... And off course i can't, if i have a softbrick....
Well, i lost my warranty now too.
If anyone could help, pls help us. If anyone know how to pass that step in BL, pls tell us...
Ci' vediamo
Click to expand...
Click to collapse
Maybe you could provide more information. Have you been on Stock 7.1.1 and tried to unlock your bootloader without allowing Oem Unlocking in developer options? What is the current state of your device, means are you able to get into recovery mode?
7.1.1 Original Stock - Not Allowed OEM Unlocking
Everything was great, but a week ago the cellphone it restarted itself, and never back: It's stuck in bootloop.
I get it with Android 6.0, and i was upgrading via Ota until 1th July, which that means it's 7.1.1 Rom Stock
Cause i wanted have my cellphone pure, i didnt touch anything(I didn't want loose my warranty), so i'm never check to allow "oem unlocking"
Now, warranty doesn't help me because i bought it in Italia, and im living in Argentina now, and they said taht they have Local Warranty.
So, i tried to solved it by my self... I did it with my old phones but they were cheap, so i think is it that why i never have ear about Reset Software Factory Protection.
Brief:
Original Stock 7.1.1
Yes, i tried unlock BL without Allow OEM Unlocking
Yes, i can get in BootLoader and in fastboot without problem
Thank You very much
Maybe a factory reset might help. Switch off your phone. By holding the power button and the volume down button you get into bootloader mode. Tap volume up until you see recovery. Press power to confirm. (If you see the little green android, hold the power button for 2 sec and then press volume up) In the recovery menue select factory reset, if you choose with data wipe, be aware that you'll lose all your data. After that reboot your system. Hopefully it will boot up and you can set it up from scratch.
I did it.
bullfinch110 said:
Maybe a factory reset might help. Switch off your phone. By holding the power button and the volume down button you get into bootloader mode. Tap volume up until you see recovery. Press power to confirm. (If you see the little green android, hold the power button for 2 sec and then press volume down) In the recovery menue select factory reset, if you choose with data wipe, be aware that you'll lose all your data. After that reboot your system. Hopefully it will boot up and you can set it up from scratch.
Click to expand...
Click to collapse
Thank you very much, i have did it what you said but noyhing happend.
I try updating by ADB Sideload and it didn't starting yet...
This is sad... It is just 2 month old... :crying:
acalapone said:
Thank you very much, i have did it what you said but noyhing happend.
I try updating by ADB Sideload and it didn't starting yet...
This is sad... It is just 2 month old... :crying:
Click to expand...
Click to collapse
1. What happens, if pull out the ext sd-card and then reboot?
2. Which version of stock rom did you download?
3. Download and install RSD-lite on your pc
http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=66115
Start RSD-lite on your pc.
Then put your device in bootloader mode and connect it to your pc. Does RSD-lite show, that your device is connected?
bullfinch110 said:
1. What happens, if pull out the ext sd-card and then reboot?
2. Which version of stock rom did you download?
3. Download and install RSD-lite on your pc
http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=66115
Start RSD-lite on your pc.
Then put your device in bootloader mode and connect it to your pc. Does RSD-lite show, that your device is connected?
Click to expand...
Click to collapse
With or without SD it's the same... Anyway, i have the phone without SD and SIM now.
I dont know really which version its... I follow and download from this Tuto:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
1- Blur_Version.26.51.19.griffin.retail.en.US.zip
2- GRIFFIN_NPLS25.86-30-12_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
-------------------------------------------------------------------------------------------------------------------------
RSDLite: I download it, and yes, my phone it's showed like connected
PS: Image attached prove it..
Thank you again.
acalapone said:
With or without SD it's the same... Anyway, i have the phone without SD and SIM now.
I dont know really which version its... I follow and download from this Tuto:
https://forum.xda-developers.com/moto-z/how-to/how-to-update-to-official-7-1-1-moto-z-t3640298
1- Blur_Version.26.51.19.griffin.retail.en.US.zip
2- GRIFFIN_NPLS25.86-30-12_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
-------------------------------------------------------------------------------------------------------------------------
RSDLite: I download it, and yes, my phone it's showed like connected
PS: Image attached prove it..
Thank you again.
Click to expand...
Click to collapse
That's good. (Sorry for the late reply, it was late and i fell asleep).
As i understood you purchased the device in italy and now you live permantly in argentina. Where did you take the 7.1.1 OTA, in Italy or in Argentina?
With the help of RSD we could try to restore your firmware. Not sure if it works for you in Argentina.
1. Download the NPL25...RETBR stockfirmware from here on your pc https://mirrors.lolinet.com/firmware/moto/griffin/official/RETBR/
2. Extract the zip and search for this file: flashall.xml and remember where to find it.
3. Run RSD on your pc
4. Reinsert your simcard (not the sdcard). Put your moto z into bootloader mode and connect it with your pc. Wait until it gets recognized.
4. Click the three little dots in RSD (left beneath the start button). Now search the flashall.xml file and double click. It will be added to the command field.
5. Click start.
RSD should now flash the firmware onto your device. This takes about 10 minutes. Wait untill your moto reboots completely and you get a PASS notification in RSD.
Hope it works. If not, we have to try plan B.
@acalapone i have edited my post above
bullfinch110 said:
That's good. (Sorry for the late reply, it was late and i fell asleep).
As i understood you purchased the device in italy and now you live permantly in argentina. Where did you take the 7.1.1 OTA, in Italy or in Argentina?
With the help of RSD we could try to restore your firmware. Not sure if it works for you in Argentina.
1. Download the NPL25...RETBR stockfirmware from here on your pc https://mirrors.lolinet.com/firmware/moto/griffin/official/RETBR/
2. Extract the zip and search for this file: flashall.xml and remember where to find it.
3. Run RSD on your pc
4. Reinsert your simcard (not the sdcard). Put your moto z into bootloader mode and connect it with your pc. Wait until it gets recognized.
4. Click the three little dots in RSD (left beneath the start button). Now search the flashall.xml file and double click. It will be added to the command field.
5. Click start.
RSD should now flash the firmware onto your device. This takes about 10 minutes. Wait untill your moto reboots completely and you get a PASS notification in RSD.
Hope it works. If not, we have to try plan B.
Click to expand...
Click to collapse
Sorry, i was quite busy...
I bought three: One to my girlfriend, one to my brother(Both are working perfect, like a charm ¬¬) and the cursed one to me, of course!!
Well, when i read "RETBR" i remember that mine cellphone said "RETEU"(or something like that) in settings, so i have checked in my girlfriend's phone, and yeah, they are RETEU and, in the link that you have shared with me, i found one that said that.
I have downloaded both of them, just in case.
Now i'm have try with RETBR, and it didn't work
Now im going to try "RETEU", and, you know, i'm feeling lucky!
Let's cross our fingers
---------- Post added at 12:23 AM ---------- Previous post was at 12:02 AM ----------
Ok, no... It didn't work too.... X-(
I have tried with this one: XT1650-03_GRIFFIN_RETEU-EMEA_6.0.1_MPL24.246-17_cid50_subsidy-DEFAULT_regulatory-03_CFC_EMEA.xml
Yeah, i know... It's 6.0.1 ...
Well, i'm all yours
Thank you anyway...
acalapone said:
Sorry, i was quite busy...
I bought three: One to my girlfriend, one to my brother(Both are working perfect, like a charm ¬¬) and the cursed one to me, of course!!
Well, when i read "RETBR" i remember that mine cellphone said "RETEU"(or something like that) in settings, so i have checked in my girlfriend's phone, and yeah, they are RETEU and, in the link that you have shared with me, i found one that said that.
I have downloaded both of them, just in case.
Now i'm have try with RETBR, and it didn't work
Now im going to try "RETEU", and, you know, i'm feeling lucky!
Let's cross our fingers
---------- Post added at 12:23 AM ---------- Previous post was at 12:02 AM ----------
Ok, no... It didn't work too.... X-(
I have tried with this one: XT1650-03_GRIFFIN_RETEU-EMEA_6.0.1_MPL24.246-17_cid50_subsidy-DEFAULT_regulatory-03_CFC_EMEA.xml
Yeah, i know... It's 6.0.1 ...
Well, i'm all yours
Thank you anyway...
Click to expand...
Click to collapse
You cannot go back to 6.x after updating the bootloader to 7.x
lollyjay said:
You cannot go back to 6.x after updating the bootloader to 7.x
Click to expand...
Click to collapse
Yes, i know it... But in my despair i didn't read it, then.. when fail, i read it.
Thank you anyway
acalapone said:
Yes, i know it... But in my despair i didn't read it, then.. when fail, i read it.
Thank you anyway
Click to expand...
Click to collapse
There is still no RETEU 7.0 available, thats why you have to flash the RETBR.
Try again to flash the RETBR NPL25..firmware with RSD. If you'll get the same failed error message, here is
PLAN B:
Copy the flashall.xml file and rename it to flashallcopy.xml.
Open the copied file with a text editor and delete the 2 lines with "gpt" and "bootloader" in it. Save it and close the copy. With this the RSD program will skip those two commands. Click the 3 dots and add the flashallcopy.xml file to RSD. Click Start.
If that doesn't work, we have to run Plan C
Good luck