Ok I feel stuck in corner right now. I was testing a CM14 rom, decided to go back to CM13 by restoring a backup through TWRP. Once the restore was complete the FP scanner was acting out a little: it would detect my finger twice (without recongnizing my fingerprint) before not working at all. PIN unlock is working fine
SO I decided to reflash a angi kernel version that was initially working with my CM13 rom (version 2.01r2 i think). After that, my power button and volume down are not working AND when I try to unlock my screen I get a black screen, then I see marshmallow default wallpaper and the screen closes... :crying:
How can I reset to recovery without the power button and when I can't unlock screen???? Other then waiting for the battery to drain out....
Please help me....
what happened to power bttn?
Run edl.bat on computer to boot in EDL mode, then flash MIUI rom with miflash
Related
Hi all,
I got into some trouble with my XGO. I had it rooted with CWM installed and wanted to install Phantom Kernel 1.0.8 Performance. I rebooted to CWM, installed the Kernel, and it was all successful and told me to reboot phone. That's when I realized I have no way to move back to main CWM screen - there was no ++Go back++ option at the end of menu and touchscreen didn't work either. I could only move up, down and forward.
So I decided to hold some combinations of Power and Volume buttons - when I held Power+Vol Up, my phone turned off.
Here's the problem - now when I hold the Power button it only vibrates shortly as always and that's it. The screen remains black and led flashes but nothing else happens.
Call me a dumb if I messed up something. But what other option did I have on the CWM?
What do I do now? Is Sony Update Service my only option?
Closed
Ok, I restored stock ROM, pls delete thread.
Is your bootloader unlocked?
Best flash kernels with fastboot not CWM because it won't let you flash unless you can (bootloader unlocked)
hey guys.. i finally decided to change the laggy stock rom to the latest cm11 mod
installation was okay and all.. when the phone started, it kept saying keyboard stopped working
okay i figured that i copied the wrong gapps .. now comes the real problem,
i tried to boot into recovery by holding power and up/down both didnt work
is there a tool to flash the cmw into my phone from my pc then patch the right gapps?
my phone is pretty useless now so please any answer should help thanks.
This is an idea i give you, i don´t know if your home button or power button are working fine but i had that problem when i started this rom installing addiction, my home button was a little damaged so if i want to enter to recovery i have to press it hard. Maybe you should give it a try pressing harder the buttons. Just an idea.
@medothe1: you are more efficiant, if u use the usual buttons to start recovery: power & louder & menu.
When logo bootloader appears, release power-button.
Can get to settings
My phone has problems after calibrating the battery with an app I think that was the beginning, the phone when I turn it off is stuck on the power off does not let me enter fastboot or recovery mode. It does not turn on with just pressing the button I have to press it several times or for several seconds to start it, when the same restart is left off it does not restart only, I try to restore it from the system and it does not stay off, I have a rom 6.0.1 The truth is that I do not want to reinstall the stock rom but I can not get into fastboot mode because of the problem and it always costs me to turn it on, everything started when installing a program for. Calibrate battery.
The phone is not brick i used al day long but i have this problem..
norbertoramones said:
My phone has problems after calibrating the battery with an app I think that was the beginning, the phone when I turn it off is stuck on the power off does not let me enter fastboot or recovery mode. It does not turn on with just pressing the button I have to press it several times or for several seconds to start it, when the same restart is left off it does not restart only, I try to restore it from the system and it does not stay off, I have a rom 6.0.1 The truth is that I do not want to reinstall the stock rom but I can not get into fastboot mode because of the problem and it always costs me to turn it on, everything started when installing a program for. Calibrate battery.
The phone is not brick i used al day long but i have this problem..
Click to expand...
Click to collapse
Press both volume up and down for 10-15 seconds, u will get in fast boot then go to recovery and clean flash
ayushg1214 said:
Press both volume up and down for 10-15 seconds, u will get in fast boot then go to recovery and clean flash
Click to expand...
Click to collapse
This solve mi problem to enter in fastboot mode i flash the firmware KitKat 4.4.4 un evereything OK put when i turn of the phone the same problem don't restart the phone i need to pulse for many time the button for my moto e turn on why this happen even if i reinstal the firmware don't solvet
Try to erase cache from fast boot itself, ( fastboot erase cache) and remove the recovery (fastboot erase recovery) then flash the latest twrp again( google the procedure if u don't know)
Then again wipe ALL partitions except the SD card where u have put the custom ROM( I recommend using a custom ROM like lineage os(stable)(latest nightly) instead of stock)
Also don't restore any previously backed up data from twrp, and after successfully flashing the ROM let it boot. It might take time( 15 mins). Also ensure that your phone is charged > 50%
@norbertoramones You can have a look at my XDA DevDB project: Unbrick hard bricked Motorola Moto E - Aravind V. Nair (XDA)
It might be of help. If you can get fastboot to work, use the 'Fastboot Unbrick.bat' script I have made and everything will be back to normal. ARe you able to boot to the OS?
when i charge my phone and it is powered off it boots into a recovery screen that says unmodified system partition and tells me to swipe to unlock but the touchscreen does not work if you swipe the only working button is the power button which just shows a pig padlock and then you have to swipe to unlock the padlock which doesn't work either. if i want to exit the screen i have to hold the power and volume button EDIT: i re flashed twrp using adb on my computer and the screen was responsive thanks for your help!
You just have to let it charge at the padlock screen. Then unplug the charger and turn on the phone, when the red text on the bottom disappears plug the charger back in. It's just a bug. It happens for me too.
was about to install a new viper rom from TWRP and when completed it was not booting. so i restored my back up and now i'm getting a fail "failed to mount data(no such process". installed a the original viper rom and now its showing decryption unsuccessful after the phone boots and showing Unmodified System Partition
fancydownledge said:
when i charge my phone and it is powered off it boots into a recovery screen that says unmodified system partition and tells me to swipe to unlock but the touchscreen does not work if you swipe the only working button is the power button which just shows a pig padlock and then you have to swipe to unlock the padlock which doesn't work either. if i want to exit the screen i have to hold the power and volume button EDIT: i re flashed twrp using adb on my computer and the screen was responsive thanks for your help!
Click to expand...
Click to collapse
Which TWRP did you reflashed and it worked?
I have the same problem, TWRP booting when i connect a charger on powered off phone, and the screen doesn't respond,
tried 3 different TWRPs, reflashed, but without success.
Does somebody have a stock recovery IMG for the 825 ?
Ok, i've managed to find it This is the stock recovery IMG, working fine, extracted from original firmware.
https://mega.nz/#!yYd30a7A!hK7RoQjhWkG8S2nS3__B8xbnwAssN4QI59rXJyQ1y9o
Credits go to nkk71 https://forum.xda-developers.com/member.php?u=2605798 for the great tool to exctract the firmware image,
without it i wouldn't accomplish the task.
If the link will die, PM me, i'll reupload.
I am using custom rom from nearly 6 months .but today a weird thing happend and here i am on a not useable poco
so i was watching youtube on chrome then i tried to lock my device bt clicking power button so many .it didnt lock the device.so i thought its my custom rom glitch maybe.so i long pressed the power button and tried to reboot.but suddenly the reboot took me to twrp instead of roms home screen..i tried three tiimes ,same thing happend.then last choice to format data and flash rom again.i did the flashing process same as i always do.this time too ,same thing ,aftr flash i reboot the device .it took me to recovery.now idk what to do .i have a working twrp recovery only and yes fastboot too.but idk why it cant boot to home screen even after i flased new rom from scratch..let me know about your thoughts.and i will let you know what after this.
Did you try hard reboot?
Does your power button working properly?
Try to flash stock miui via mi flash
Mcha01 said:
Did you try hard reboot?
Does your power button working properly?
Try to flash stock miui via mi flash
Click to expand...
Click to collapse
It was my power volume button issue. Cause of battery swelling, it was forcing the button to be always pressed. Making it only go to recovery.