How to Replace That Glass to New Glass ?? Reply As Soon As Possible ??
What they need is just the rear housing (the part shown in the attached pic). And they also need to stop throwing keys and change in the same pocket with the phone.
Related
Hey guys, my camera has been taking not so great pics lately, and Iv always suspected it was because of my camera lens glass cover that is on the midplate
the glass itself has some wear on it from light scratches, and it has a group of tiny bubbles on the glass itself (im thinking there is some protective film on the glass on the other side)
anyways , I took off the midplate and took a picture without the glass.
results = my pictures were AMAZING... the clearest, sharpest ever seen on this phone.
how can I make this permanent?... is the glass replaceable? ... can I remove the glass and let it run naked?... is it safe?.. (with a battery cover and silicon case over it)
any suggestions?... thanks guys.
I think the same thing that happened to the glass can happen to the lens.
直接更换玻璃，贴个保护膜！一切ok
直接更换玻璃，贴个保护膜！一切ok
bigjoe87865 said:
Hey guys, my camera has been taking not so great pics lately, and Iv always suspected it was because of my camera lens glass cover that is on the midplate
the glass itself has some wear on it from light scratches, and it has a group of tiny bubbles on the glass itself (im thinking there is some protective film on the glass on the other side)
anyways , I took off the midplate and took a picture without the glass.
results = my pictures were AMAZING... the clearest, sharpest ever seen on this phone.
how can I make this permanent?... is the glass replaceable? ... can I remove the glass and let it run naked?... is it safe?.. (with a battery cover and silicon case over it)
any suggestions?... thanks guys.
Click to expand...
Click to collapse
Hi,
Do you have the pics to show how you removed the midplate? I am thinking of modding my samsung vibrant to a non-camera one. I know it sounds silly but my workplace doesn't allow camera phones
nhc said:
Hi,
Do you have the pics to show how you removed the midplate? I am thinking of modding my samsung vibrant to a non-camera one. I know it sounds silly but my workplace doesn't allow camera phones
Click to expand...
Click to collapse
Phones without camera lol, who do you work for Hitler? Oh maybe apple nvm. There is a tread in general for replacing the camer you can use that.
Good afternoon,
I did the search, I found many threads about disassembly, but not what I seek.
My front cover is all scratched.
I bought a front cover, but did not bring the digitizer, and I am wonder if it is possible to use the digitizer that comes with the mobile phone and use it with the new front cover. And if it is possible how?
Hmm. What do you mean by a "digitiser"?
Sent from my U20i using XDA App
You have the front cover, and on the front cover you have the digitizer. But this front cover that i have, dont have the digitizer, so i have to take it from the original front cover and put it on the new, and im asking if is that possible.
h**p://i43.tinypic.com/zxwvup.jpg
Or in other words, i want to remove this system from this front cover and try to put it in another without it.
I'm in the same situation with my X10 Mini Pro. The new front cover I bought has next-to nothing attached to it, unlike the existing front cover.
I downloaded the service manuals, and although they do describe how to replace the front cover assembly, it seems to be assumed that you have the whole multi-component unit (except the ear speaker). So I think I've bought a pup. Next time I'll read the manuals first.
I'll be putting on a gel case and learning to live with the scratches.
Hello people yesterday my screen got i little crack in it. The amoled screen is ok it is working prefectly no damage at all. Its the outer front glass screen that is damaged. I can buy this Outer glass screen on ebay for like 5 dollars, but my question is can i replace this and how ? I couldnt fine anything on google or youtube.
http://www.youtube.com/watch?v=65pvAINg2ME
There is one more thing i dont understand how can the front size glass stick to the phone. If i shake it wont it fall of again because it was taped against the frame.or is it clicking in ?
It is taped.
Thread Closed for starting two thread asking the same question - http://forum.xda-developers.com/showthread.php?p=33378911#post33378911 -
Thanks
The-Hulk
I have a S3 that had a cracked screen. I bought a replacement lens and during the removal the digitizer also cracked. I was a little over eager during the repair and didn't fully appreciate how well the lens and digitizer were fused. So now I have a perfectly fine screen, just a broken digitizer.
I looked around and it looks like the only options are to get the lens only or the entire assembly. Anyone know if there is a middle ground where I can replace the lens and digitizer but not the screen?
Thanks.
How would you do to replace only the digitizer ? You must remove the glass to do it, and probably break it during process.
That's why even if it's more expensive I bought the whole front piece: glass + digitizer + frame.
You can buy three things:
- front glass only: cheap but very tricky to remove it only without breaking digitizer.
- front glass + digitizer: you have to remove them from your phone, first glass, then digitizer, unglue them and so on.
- front glass + digitizer + frame: you have to move power and sound level buttons, antenna, motherboard, front camera lens, speaker and so on.
Btw what are you calling 'lens' ?
Striatum_bdr said:
How would you do to replace only the digitizer ? You must remove the glass to do it, and probably break it during process.
That's why even if it's more expensive I bought the whole front piece: glass + digitizer + frame.
You can buy three things:
- front glass only: cheap but very tricky to remove it only without breaking digitizer.
- front glass + digitizer: you have to remove them from your phone, first glass, then digitizer, unglue them and so on.
- front glass + digitizer + frame: you have to move power and sound level buttons, antenna, motherboard, front camera lens, speaker and so on.
Btw what are you calling 'lens' ?
Click to expand...
Click to collapse
I was calling the front glass the lens. It seemed pretty easy to find just the front glass. I wasn't able to find the front glass + digitizer - there were plenty of places that said this is what you get, but looking at the pictures it only resembled the front glass. I removed both from the phone (and broke the digitizer cable in process). I ended up calling Samsung and they said they would do the whole assembly for $178. My understanding is that the whole assembly also includes the LCD, correct? Oddly enough, it appears to be more on ebay and local repair shops, so I went with sending it in.
The full assembly includes the samoled screen.
Sent from my GT-I9300 using Tapatalk 2
Hello, I have galaxy s3 with cracked front screen (amoled screen is not cracked) and I want to change it. I have viewed some videos about changing it and have a question about a digitizer and front glass. Example in this video http://youtu.be/6gLzEbAIGos?t=3m32s a man removes front screen (i dont know how to call it, digitizer or front glass) at 3:30 and then at 4:30 he puts a new front screen but there are no connectors on it, so how does the touch screen even works without any connectors? This man said that he bought this screen http://www.amazon.com/gp/product/B00932V17C/ref=oh_details_o06_s00_i00?ie=UTF8&psc=1 and there's written that it is a front glass and "The LCD display and touch screen are not included". So where is the digitizer (touch screen) ??? At that video when he removed front screen there was only amoled screen left, then he put on that front screen without digitizer and touch screen worked. I am soo confused. Please explain it to me.
As I understand it the front part is simply a glass screen over the digitiser/touchscreen hence the lack of connectors, the tricky part is removing the glass from the touchscreen without damaging it, then rebonding the new glass.
Sent from my GT-I9300
ghostofcain said:
As I understand it the front part is simply a glass screen over the digitiser/touchscreen hence the lack of connectors, the tricky part is removing the glass from the touchscreen without damaging it, then rebonding the new glass.
Sent from my GT-I9300
Click to expand...
Click to collapse
But in the video when he removed that front glass without connectors there seems no digitizer left over the lcd.
The digitiser and oled screen are bonded together, the front glass is just a cover.
Don't bother with the cheap 'glass', it's usually soft plastic and useless. If you read the reviews it's clear you are buying a con.
Sent from my GT-I9300 using Tapatalk